There are two descriptions of the TEO (Timer Events Oriented) cpuidle
governor in the kernel source tree, one in the C file containing its
code and one in cpuidle.rst which is part of admin-guide.
Instead of trying to keep them both in sync and in order to reduce
text duplication, include the governor description from the C file
directly into cpuidle.rst.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As soon as a gpio is registered, it should be usable by a consumer. So,
do all the initialization before registering the gpios. Without this
change, a consumer can request a GPIO IRQ and have the gpio to IRQ
mapping fail.
Change-Id: If3e264ab764c633f00fcc280db0e1f9a10af5efb
Signed-off-by: Saravana Kannan <saravanak@google.com>
(cherry picked from commit 32188bddc9d8ba8d5907882ed5bd1dc3a83662a9)
There's no reason to pin workers onto CPU2. Instead, allow the workers to
run where the workqueue sees fit, most likely on the CPU which enqueues the
worker, which is better than always dumping the workers onto CPU2.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Calling the architected timer adds nontrivial overhead as observed in perf
top, especially since the DVFS functions are hot paths.
Remove all of the sched_clock() calls since they're unneeded by ACPM.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Nahuel Gómez <nahuelgomez329@gmail.com>
This driver isn't even compatible with our kernel version, though it is present in the ems folder.
Signed-off-by: Nahuel Gómez <nahuelgomez329@gmail.com>
This was applied to fix a suspected reboot issue, but it turns out this was not the source of it.
This reverts commit ed828ec374bbd9f3a538a0c92421e9e0074b078f.
* This is a modified version of schedutil, introducing two new tunables: "efficient_freq" and "up_delay".
* Only raise cpufreq to the non-efficient one (higher than effcient frequencies) if the governor keeps requiring non-efficient frequencies for more than up_delay time.
* Override the new frequencies with the efficient one if the consecutive request time doesn't reach up_delay.
* The two tunables support multiple args, e.g. you can set "1248000 1401600" for "efficient_freq" and set "50 60" for "up_delay", which means it would wait 50ms before raising the frequency to 1248mhz and wait for 60ms before raising the frequency to 1401mhz.
[Flopster101: move the kconfig entry to the proper section.]
As can be seen in the device-tree, this domain is unused for our device:
devfreq_g3d {
dm-index = <0x08>;
available = "false";
cal_id = <0xb040008>;
dm_type_name = "dm_gpu";
};
Signed-off-by: Nahuel Gómez <nahuelgomez329@gmail.com>
Change-Id: Id6fe0d3ebf7eabb423f2ec64d79075c0e3ba9e14
Signed-off-by: Samuel Pascua <sgpascua@ngcp.ph>
Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com>
The correct printk format specifier when calculating buffer offsets
should be "%tx" as it is a pointer difference (a.k.a ptrdiff_t). This
fixes some W=1 build warnings reported by the kernel test robot.
Bug: 329799092
Fixes: 63f7ddea2e48 ("ANDROID: binder: fix KMI-break due to address type change")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401100511.A4BKMwoq-lkp@intel.com/
Change-Id: Iaa87433897b507c47fe8601464445cb6de4b61db
Signed-off-by: Carlos Llamas <cmllamas@google.com>
In binder_add_freeze_work() we iterate over the proc->nodes with the
proc->inner_lock held. However, this lock is temporarily dropped in
order to acquire the node->lock first (lock nesting order). This can
race with binder_node_release() and trigger a use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff53c04c29dd04 by task freeze/640
CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_add_freeze_work+0x148/0x478
binder_ioctl+0x1e70/0x25ac
__arm64_sys_ioctl+0x124/0x190
Allocated by task 637:
__kmalloc_cache_noprof+0x12c/0x27c
binder_new_node+0x50/0x700
binder_transaction+0x35ac/0x6f74
binder_thread_write+0xfb8/0x42a0
binder_ioctl+0x18f0/0x25ac
__arm64_sys_ioctl+0x124/0x190
Freed by task 637:
kfree+0xf0/0x330
binder_thread_read+0x1e88/0x3a68
binder_ioctl+0x16d8/0x25ac
__arm64_sys_ioctl+0x124/0x190
==================================================================
Fix the race by taking a temporary reference on the node before
releasing the proc->inner lock. This ensures the node remains alive
while in use.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Bug: 366003708
Link: https://lore.kernel.org/all/20240924184401.76043-2-cmllamas@google.com/
Change-Id: I47b053532dd4cd3424d35d6f254ca4d00c426411
Signed-off-by: Carlos Llamas <cmllamas@google.com>
In binder_add_freeze_work() we iterate over the proc->nodes with the
proc->inner_lock held. However, this lock is temporarily dropped to
acquire the node->lock first (lock nesting order). This can race with
binder_deferred_release() which removes the nodes from the proc->nodes
rbtree and adds them into binder_dead_nodes list. This leads to a broken
iteration in binder_add_freeze_work() as rb_next() will use data from
binder_dead_nodes, triggering an out-of-bounds access:
==================================================================
BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124
Read of size 8 at addr ffffcb84285f7170 by task freeze/660
CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18
Hardware name: linux,dummy-virt (DT)
Call trace:
rb_next+0xfc/0x124
binder_add_freeze_work+0x344/0x534
binder_ioctl+0x1e70/0x25ac
__arm64_sys_ioctl+0x124/0x190
The buggy address belongs to the variable:
binder_dead_nodes+0x10/0x40
[...]
==================================================================
This is possible because proc->nodes (rbtree) and binder_dead_nodes
(list) share entries in binder_node through a union:
struct binder_node {
[...]
union {
struct rb_node rb_node;
struct hlist_node dead_node;
};
Fix the race by checking that the proc is still alive. If not, simply
break out of the iteration.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Bug: 366003708
Link: https://lore.kernel.org/all/20240924184401.76043-3-cmllamas@google.com/
Change-Id: I5ec9d49277a23b864862665b52213460750c535e
Signed-off-by: Carlos Llamas <cmllamas@google.com>
When a binder reference is cleaned up, any freeze work queued in the
associated process should also be removed. Otherwise, the reference is
freed while its ref->freeze.work is still queued in proc->work leading
to a use-after-free issue as shown by the following KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_release_work+0x398/0x3d0
Read of size 8 at addr ffff31600ee91488 by task kworker/5:1/211
CPU: 5 UID: 0 PID: 211 Comm: kworker/5:1 Not tainted 6.11.0-rc7-00382-gfc6c92196396 #22
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
binder_release_work+0x398/0x3d0
binder_deferred_func+0xb60/0x109c
process_one_work+0x51c/0xbd4
worker_thread+0x608/0xee8
Allocated by task 703:
__kmalloc_cache_noprof+0x130/0x280
binder_thread_write+0xdb4/0x42a0
binder_ioctl+0x18f0/0x25ac
__arm64_sys_ioctl+0x124/0x190
invoke_syscall+0x6c/0x254
Freed by task 211:
kfree+0xc4/0x230
binder_deferred_func+0xae8/0x109c
process_one_work+0x51c/0xbd4
worker_thread+0x608/0xee8
==================================================================
This commit fixes the issue by ensuring any queued freeze work is removed
when cleaning up a binder reference.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Bug: 366003708
Link: https://lore.kernel.org/all/20240924184401.76043-4-cmllamas@google.com/
Change-Id: Icc40e7dd6157981f4adbea7243e55be118552321
[cmllamas: drop BINDER_STAT_FREEZE as it's not supported here]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Alice points out that binder_request_freeze_notification() should not
return EINVAL when the relevant node is dead [1]. The node can die at
any point even if the user input is valid. Instead, allow the request
to be allocated but skip the initial notification for dead nodes. This
avoids propagating unnecessary errors back to userspace.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/CAH5fLghapZJ4PbbkC8V5A6Zay-_sgTzwVpwqk6RWWUNKKyJC_Q@mail.gmail.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 366003708
(cherry picked from commit ca63c66935b978441055e3d87d30225267f99329
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-next)
Change-Id: I03af1eedfeb194f5a775388cbb4e7487e4a5dfc0
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Add the pending proc->delivered_freeze work to the debugfs output. This
information was omitted in the original implementation of the freeze
notification and can be valuable for debugging issues.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-9-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 366003708
(cherry picked from commit cb2aeb2ec25884133110ffe5a67ff3cf7dee5ceb
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-next)
Change-Id: Ifc9a22b52e38c35af661732486fa1f154adb34de
[cmllamas: fix KMI break with binder_proc_ext_entry()]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
If a freeze notification is cleared with BC_CLEAR_FREEZE_NOTIFICATION
before calling binder_freeze_notification_done(), then it is detached
from its reference (e.g. ref->freeze) but the work remains queued in
proc->delivered_freeze. This leads to a memory leak when the process
exits as any pending entries in proc->delivered_freeze are not freed:
unreferenced object 0xffff38e8cfa36180 (size 64):
comm "binder-util", pid 655, jiffies 4294936641
hex dump (first 32 bytes):
b8 e9 9e c8 e8 38 ff ff b8 e9 9e c8 e8 38 ff ff .....8.......8..
0b 00 00 00 00 00 00 00 3c 1f 4b 00 00 00 00 00 ........<.K.....
backtrace (crc 95983b32):
[<000000000d0582cf>] kmemleak_alloc+0x34/0x40
[<000000009c99a513>] __kmalloc_cache_noprof+0x208/0x280
[<00000000313b1704>] binder_thread_write+0xdec/0x439c
[<000000000cbd33bb>] binder_ioctl+0x1b68/0x22cc
[<000000002bbedeeb>] __arm64_sys_ioctl+0x124/0x190
[<00000000b439adee>] invoke_syscall+0x6c/0x254
[<00000000173558fc>] el0_svc_common.constprop.0+0xac/0x230
[<0000000084f72311>] do_el0_svc+0x40/0x58
[<000000008b872457>] el0_svc+0x38/0x78
[<00000000ee778653>] el0t_64_sync_handler+0x120/0x12c
[<00000000a8ec61bf>] el0t_64_sync+0x190/0x194
This patch fixes the leak by ensuring that any pending entries in
proc->delivered_freeze are freed during binder_deferred_release().
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 366003708
(cherry picked from commit 1db76ec2b4b206ff943e292a0b55e68ff3443598
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-next)
Change-Id: Iafdec3421c521b4b591b94455deba7ee5102c8ca
[cmllamas: drop BINDER_STAT_FREEZE and use binder_proc_ext_entry()]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
In some situations where xhci removal happens parallel to xhci_handshake,
we encounter a scenario where the xhci_handshake can't succeed, and it
polls until timeout.
If xhci_handshake runs until timeout it can on some platforms result in
a long wait which might lead to a watchdog timeout.
Add a helper that checks xhci status during the handshake, and exits if
set state is entered. Use this helper in places where xhci_handshake is
called unlocked and has a long timeout. For example xhci command timeout
and xhci reset.
[commit message and code comment rewording -Mathias]
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 383443034
Change-Id: Iec54af32dcf6b07075e3f084dba914fc43635ee6
(cherry picked from commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c)
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
This change adds vendor hook for gic suspend syscore ops callback.
And it is invoked during deepsleep and hibernation to store
gic register snapshot.
Bug: 340049585
Change-Id: I4e3729afa4daf18d73e00ee9601b6da72a578b4a
Signed-off-by: Nagireddy Annem <quic_nannem@quicinc.com>
Signed-off-by: Kamati Srinivas <quic_kamasrin@quicinc.com>
[ Upstream commit 4e2969a0d6a7549bc0bc1ebc990588b622c4443d ]
Add checking for vf id of mailbox, in order to avoid array
out-of-bounds risk.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 31e97d7c9ae3de072d7b424b2cf706a03ec10720 upstream.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc59b9a5f7201b9f7272944596113a82cc7773d5 ]
Fix the return type which should be bool.
Fixes: 955b785ec6b3 ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95c90e4ad89d493a7a14fa200082e466e2548f9d ]
We must check if there is an active slave before dereferencing the pointer.
Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4c5c5d2ef40a9f67a9241dc5422eac9ffe19547 ]
If the active slave is cleared manually the xfrm state is not flushed.
This leads to xfrm add/del imbalance and adding the same state multiple
times. For example when the device cannot handle anymore states we get:
[ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA
because it's filled with the same state after multiple active slave
clearings. This change also has a few nice side effects: user-space
gets a notification for the change, the old device gets its mac address
and promisc/mcast adjusted properly.
Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf24ad09bc0b05e97fb48b962b2c9246fc76727 ]
When an ATU violation occurs, the switch uses the ATU FID register to
report the FID of the MAC address that incurred the violation. It would
be good for the driver to know the FID value for purposes such as
logging and CPU-based authentication.
Up until now, the driver has been calling the mv88e6xxx_g1_atu_op()
function to read ATU violations, but that doesn't do exactly what we
want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0.
(side note, the documentation for the ATU Get/Clear Violation command
says that writes to the ATU FID register have no effect before the
operation starts, it's only that we disregard the value that this
register provides once the operation completes)
So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather
mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need
to write it.
The remainder of mv88e6xxx_g1_atu_op() except for
mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a
GET_CLR_VIOLATION command to the ATU. In principle we could have still
kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID
register are pointless, but in the interest of doing less CPU work per
interrupt, write a new function called mv88e6xxx_g1_read_atu_violation()
and call it.
The FID will be the port default FID as set by mv88e6xxx_port_set_fid()
if the VID from the packet cannot be found in the VTU. Otherwise it is
the FID derived from the VTU entry associated with that VID.
Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 528876d867a2 ("net: dsa: mv88e6xxx: Fix out-of-bound access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ae738dfef2c0323752ab81786e2d298c9939321 ]
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9c33663af9ad115f90c076a1828129a3fbadea98 upstream.
This patch adds code to check HCI_UART_PROTO_READY flag before
accessing hci_uart->proto. It fixes the race condition in
hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO.
This issue bug found by Yu Hao and Weiteng Chen:
BUG: general protection fault in hci_uart_tty_ioctl [1]
The information of C reproducer can also reference the link [2]
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1]
Reported-by: Weiteng Chen <wchen130@ucr.edu>
Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2]
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 128f71fe014fc91efa1407ce549f94a9a9f1072c upstream.
The base iomux offsets for each GPIO pin line are accumulatively
calculated based off iomux width flag in rockchip_pinctrl_get_soc_data.
If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or
IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8
bytes, otherwise it would increase by 4 bytes.
Despite most of GPIO2-B iomux have 2-bit data width, which can be fit
into 4 bytes space with write mask, it actually take 8 bytes width for
whole GPIO2-B line.
Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328
GPIO2-B pins") wrongly set iomux width flag to 0, causing all base
iomux offset for line after GPIO2-B to be calculated wrong. Fix the
iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is
correctly increased by 8, matching the actual width of GPIO2-B iomux.
Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
Cc: stable@vger.kernel.org
Reported-by: Richard Kojedzinszky <richard@kojedz.in>
Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/
Tested-by: Richard Kojedzinszky <richard@kojedz.in>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/20240709105428.1176375-1-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27ec3c57fcadb43c79ed05b2ea31bc18c72d798a upstream.
mwifiex_band_2ghz and mwifiex_band_5ghz are statically allocated, but
used and modified in driver instances. Duplicate them before using
them in driver instances so that different driver instances do not
influence each other.
This was observed on a board which has one PCIe and one SDIO mwifiex
adapter. It blew up in mwifiex_setup_ht_caps(). This was called with
the statically allocated struct which is modified in this function.
Cc: stable@vger.kernel.org
Fixes: d6bffe8bb520 ("mwifiex: support for creation of AP interface")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240809-mwifiex-duplicate-static-structs-v1-1-6837b903b1a4@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit defd8b3c37b0f9cb3e0f60f47d3d78d459d57fda ]
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.)
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Cc: Andreas Schultz <aschultz@tpip.net>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ]
aac_probe_one() calls hardware-specific init functions through the
aac_driver_ident::init pointer, all of which eventually call down to
aac_init_adapter().
If aac_init_adapter() fails after allocating memory for aac_dev::queues,
it frees the memory but does not clear that member.
After the hardware-specific init function returns an error,
aac_probe_one() goes down an error path that frees the memory pointed to
by aac_dev::queues, resulting.in a double-free.
Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com>
Link: https://bugs.debian.org/1075855
Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support")
Signed-off-by: Ben Hutchings <benh@debian.org>
Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The check should be done against 'eproc' before it gets dereferenced.
Fixes: d49297739550 ("BACKPORT: binder: use euid from cred instead of using task")
Change-Id: Ief0c08212c4da8bdfdf628474de9dd30ee5a8db0
Signed-off-by: Carlos Llamas <cmllamas@google.com>
The patches to support binder's frozen notification feature break the
KMI. This change fixes such issues by (1) moving proc->delivered_freeze
into the existing proc_wrapper struction, (2) dropping the frozen stats
support and (3) amending the STG due to a harmless enum binder_work_type
addition.
These are the reported KMI issues fixed by this patch:
function symbol 'int __traceiter_binder_transaction_received(void*, struct binder_transaction*)' changed
CRC changed from 0x74e9c98b to 0xfe0f8640
type 'struct binder_proc' changed
byte size changed from 584 to 632
member 'struct list_head delivered_death' changed
offset changed by 256
member 'struct list_head delivered_freeze' was added
13 members ('u32 max_threads' .. 'u64 android_oem_data1') changed
offset changed by 384
type 'struct binder_thread' changed
byte size changed from 464 to 496
2 members ('atomic_t tmp_ref' .. 'bool is_dead') changed
offset changed by 224
4 members ('struct task_struct* task' .. 'enum binder_prio_state prio_state') changed
offset changed by 256
type 'struct binder_stats' changed
byte size changed from 216 to 244
member changed from 'atomic_t br[21]' to 'atomic_t br[23]'
type changed from 'atomic_t[21]' to 'atomic_t[23]'
number of elements changed from 21 to 23
member changed from 'atomic_t bc[19]' to 'atomic_t bc[22]'
offset changed from 672 to 736
type changed from 'atomic_t[19]' to 'atomic_t[22]'
number of elements changed from 19 to 22
member changed from 'atomic_t obj_created[7]' to 'atomic_t obj_created[8]'
offset changed from 1280 to 1440
type changed from 'atomic_t[7]' to 'atomic_t[8]'
number of elements changed from 7 to 8
member changed from 'atomic_t obj_deleted[7]' to 'atomic_t obj_deleted[8]'
offset changed from 1504 to 1696
type changed from 'atomic_t[7]' to 'atomic_t[8]'
number of elements changed from 7 to 8
type 'enum binder_work_type' changed
enumerator 'BINDER_WORK_FROZEN_BINDER' (10) was added
enumerator 'BINDER_WORK_CLEAR_FREEZE_NOTIFICATION' (11) was added
Bug: 363013421
Change-Id: If9f1f14a2eda215a4c9cb0823c50c8e0e8079ef1
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Add a flag to binder_features to indicate that the freeze notification
feature is available.
Signed-off-by: Yu-Ting Tseng <yutingtseng@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240709070047.4055369-6-yutingtseng@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 363013421
(cherry picked from commit 30b968b002a92870325a5c9d1ce78eba0ce386e7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-next)
Change-Id: Ic26c8ae42d27c6fd8f5daed5eecabd1652e29502
[cmllamas: fix trivial conflicts due to missing extended_error]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Frozen processes present a significant challenge in binder transactions.
When a process is frozen, it cannot, by design, accept and/or respond to
binder transactions. As a result, the sender needs to adjust its
behavior, such as postponing transactions until the peer process
unfreezes. However, there is currently no way to subscribe to these
state change events, making it impossible to implement frozen-aware
behaviors efficiently.
Introduce a binder API for subscribing to frozen state change events.
This allows programs to react to changes in peer process state,
mitigating issues related to binder transactions sent to frozen
processes.
Implementation details:
For a given binder_ref, the state of frozen notification can be one of
the followings:
1. Userspace doesn't want a notification. binder_ref->freeze is null.
2. Userspace wants a notification but none is in flight.
list_empty(&binder_ref->freeze->work.entry) = true
3. A notification is in flight and waiting to be read by userspace.
binder_ref_freeze.sent is false.
4. A notification was read by userspace and kernel is waiting for an ack.
binder_ref_freeze.sent is true.
When a notification is in flight, new state change events are coalesced into
the existing binder_ref_freeze struct. If userspace hasn't picked up the
notification yet, the driver simply rewrites the state. Otherwise, the
notification is flagged as requiring a resend, which will be performed
once userspace acks the original notification that's inflight.
See https://r.android.com/3070045 for how userspace is going to use this
feature.
Signed-off-by: Yu-Ting Tseng <yutingtseng@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240709070047.4055369-4-yutingtseng@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 363013421
(cherry picked from commit d579b04a52a183db47dfcb7a44304d7747d551e1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-next)
Change-Id: I5dd32abba932ca7d03ae58660143e075ed778b81
[cmllamas: fix merge conflicts due to missing 0567461a7a6e]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
