[ Upstream commit 456f010bfaefde84d3390c755eedb1b0a5857c3c ]
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 292207809486d99c78068d3f459cbbbffde88415 ]
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0566f83d206c7a864abcd741fe39d6e0ae5eef29 ]
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a0ea70da56ee8c2716d0b79e9959d3c47efab62 ]
Commit 43645ce03e00 ("qed: Populate nvm image attribute shadow.")
added support for populating flash image attributes, notably
"num_images". However, some cards were not able to return this
information. In such cases, the driver would return EINVAL, causing the
driver to exit.
Add check to return EOPNOTSUPP instead of EINVAL when the card is not
able to return these information. The caller function already handles
EOPNOTSUPP without error.
Fixes: 43645ce03e00 ("qed: Populate nvm image attribute shadow.")
Co-developed-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Louis Leseur <louis.leseur@gmail.com>
Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3301ab7d5aeb0fe270f73a3d4810c9d1b6a9f045 ]
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst.
Fixes: 92f1655aa2b22 ("net: fix __dst_negative_advice() race")
Fixes: 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.")
Link: https://lore.kernel.org/netdev/20241113105611.GA6723@incl/T/#u
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241128085950.GA4505@incl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c695005bfe6569acd73d777ca298ddddd66105 ]
Since j1939_session_skb_queue() does an extra skb_get() for each new
skb, do the same for the initial one in j1939_session_new() to avoid
refcount underflow.
Reported-by: syzbot+d4e8dc385d9258220c31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d4e8dc385d9258220c31
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241105094823.2403806-1-dmantipov@yandex.ru
[mkl: clean up commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1596a135e3180c92e42dd1fbcad321f4fb3e3b17 ]
When the length of a GSO packet in the tbf qdisc is larger than the burst
size configured the packet will be segmented by the tbf_segment function.
Whenever this function is used to enqueue SKBs, the backlog statistic of
the tbf is not increased correctly. This can lead to underflows of the
'backlog' byte-statistic value when these packets are dequeued from tbf.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configured the tbf on
the outgoing interface of the machine as follows (burstsize = 1 MTU):
$ tc qdisc add dev <oif> root handle 1: tbf rate 50Mbit burst 1514 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3
client on this machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
The 'backlog' byte-statistic has incorrect values while traffic is
transferred, e.g., high values due to u32 underflows. When the transfer
is stopped, the value is != 0, which should never happen.
This patch fixes this bug by updating the statistics correctly, even if
single SKBs of a GSO SKB cannot be enqueued.
Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets")
Signed-off-by: Martin Ottens <martin.ottens@fau.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241125174608.1484356-1-martin.ottens@fau.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98337d7c87577ded71114f6976edb70a163e27bc ]
ptp_clock_adjtime sets ptp->dialed_frequency even when adjfine
callback returns an error. This causes subsequent reads to return
an incorrect value.
Fix this by adding error check before ptp->dialed_frequency is set.
Fixes: 39a8cbd9ca05 ("ptp: remember the adjusted frequency")
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241125105954.1509971-1-ajay.kaher@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ]
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402100205.PWXIz1ZK-lkp@intel.com/
Co-developed-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 595a81988a6fe06eb5849e972c8b9cb21c4e0d54 ]
The sun4i_can_err() function only incremented the receive error counter
and never the transmit error counter, even if the STA_ERR_DIR flag
reported that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
STA_ERR_DIR flag.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-11-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee6bf3677ae03569d833795064e17f605c2163c7 ]
Call the function can_change_state() if the allocation of the skb
fails, as it handles the cf parameter when it is null.
Additionally, this ensures that the statistics related to state error
counters (i. e. warning, passive, and bus-off) are updated.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1495a21e0b8aad92132dfcf9c6fffc1bde9d5b2 ]
Clear the IRQ enable bit of WDT_MODE before asserting software reset
in order to make TOPRGU issue a system reset signal instead of an IRQ.
Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-2-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa814d784ac034c62ab3fb0ef83daeafef527e2 ]
Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:
...
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
...
and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.
This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.
Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240913191403.2560805-1-oocheret@cisco.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f8dbadef085ab447a01a8d4806a3f629fea05ed upstream.
The shader L1 cache is a writeback cache for shader loads/stores
and thus must be flushed before any BOs backing the shader buffers
are potentially freed.
Cc: stable@vger.kernel.org
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98100e88dd8865999dc6379a3356cd799795fe7b upstream.
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1ae/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Disabling lock debugging due to kernel taint
Object 0xff11000110e2ac38 @offset=3128
Allocated in nfsd_file_do_acquire+0x20f/0xa30 [nfsd] age=1635 cpu=3
pid=800
nfsd_file_do_acquire+0x20f/0xa30 [nfsd]
nfsd_file_acquire_opened+0x5f/0x90 [nfsd]
nfs4_get_vfs_file+0x4c9/0x570 [nfsd]
nfsd4_process_open2+0x713/0x1070 [nfsd]
nfsd4_open+0x74b/0x8b0 [nfsd]
nfsd4_proc_compound+0x70b/0xc20 [nfsd]
nfsd_dispatch+0x1b4/0x3a0 [nfsd]
svc_process_common+0x5b8/0xc50 [sunrpc]
svc_process+0x2ab/0x3b0 [sunrpc]
svc_handle_xprt+0x681/0xa20 [sunrpc]
nfsd+0x183/0x220 [nfsd]
kthread+0x199/0x1e0
ret_from_fork+0x31/0x60
ret_from_fork_asm+0x1a/0x30
Add nfs4_openowner_unhashed to help found unhashed nfs4_openowner, and
break nfsd4_open process to fix this problem.
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be8f982c369c965faffa198b46060f8853e0f1f0 upstream.
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: bf18f163e89c ("NFSD: Using exp_get for export getting")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9ec8d8692a6f64d81ef67d4fb6255af6be684b upstream.
K2G forwards the error triggered by a link-down state (e.g., no connected
endpoint device) on the system bus for PCI configuration transactions;
these errors are reported as an SError at system level, which is fatal and
hangs the system.
So, apply fix similar to how it was done in the DesignWare Core driver
commit 15b23906347c ("PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()").
Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors")
Link: https://lore.kernel.org/r/20240524105714.191642-3-s-vadapalli@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc73b4186736341ab5cd2c199da82db6e1134e13 upstream.
A bug was found in the find_closest() (find_closest_descending() is also
affected after some testing), where for certain values with small
progressions, the rounding (done by averaging 2 values) causes an
incorrect index to be returned. The rounding issues occur for
progressions of 1, 2 and 3. It goes away when the progression/interval
between two values is 4 or larger.
It's particularly bad for progressions of 1. For example if there's an
array of 'a = { 1, 2, 3 }', using 'find_closest(2, a ...)' would return 0
(the index of '1'), rather than returning 1 (the index of '2'). This
means that for exact values (with a progression of 1), find_closest() will
misbehave and return the index of the value smaller than the one we're
searching for.
For progressions of 2 and 3, the exact values are obtained correctly; but
values aren't approximated correctly (as one would expect). Starting with
progressions of 4, all seems to be good (one gets what one would expect).
While one could argue that 'find_closest()' should not be used for arrays
with progressions of 1 (i.e. '{1, 2, 3, ...}', the macro should still
behave correctly.
The bug was found while testing the 'drivers/iio/adc/ad7606.c',
specifically the oversampling feature.
For reference, the oversampling values are listed as:
static const unsigned int ad7606_oversampling_avail[7] = {
1, 2, 4, 8, 16, 32, 64,
};
When doing:
1. $ echo 1 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is fine
2. $ echo 2 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is wrong; 2 should be returned here
3. $ echo 3 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
2 # this is fine
4. $ echo 4 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
4 # this is fine
And from here-on, the values are as correct (one gets what one would
expect.)
While writing a kunit test for this bug, a peculiar issue was found for the
array in the 'drivers/hwmon/ina2xx.c' & 'drivers/iio/adc/ina2xx-adc.c'
drivers. While running the kunit test (for 'ina226_avg_tab' from these
drivers):
* idx = find_closest([-1 to 2], ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, so value.
* idx = find_closest(3, ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, value 1; and now one could argue whether 3 is
closer to 4 or to 1. This quirk only appears for value '3' in this
array, but it seems to be a another rounding issue.
* And from 4 onwards the 'find_closest'() works fine (one gets what one
would expect).
This change reworks the find_closest() macros to also check the difference
between the left and right elements when 'x'. If the distance to the right
is smaller (than the distance to the left), the index is incremented by 1.
This also makes redundant the need for using the DIV_ROUND_CLOSEST() macro.
In order to accommodate for any mix of negative + positive values, the
internal variables '__fc_x', '__fc_mid_x', '__fc_left' & '__fc_right' are
forced to 'long' type. This also addresses any potential bugs/issues with
'x' being of an unsigned type. In those situations any comparison between
signed & unsigned would be promoted to a comparison between 2 unsigned
numbers; this is especially annoying when '__fc_left' & '__fc_right'
underflow.
The find_closest_descending() macro was also reworked and duplicated from
the find_closest(), and it is being iterated in reverse. The main reason
for this is to get the same indices as 'find_closest()' (but in reverse).
The comparison for '__fc_right < __fc_left' favors going the array in
ascending order.
For example for array '{ 1024, 512, 256, 128, 64, 16, 4, 1 }' and x = 3, we
get:
__fc_mid_x = 2
__fc_left = -1
__fc_right = -2
Then '__fc_right < __fc_left' evaluates to true and '__fc_i++' becomes 7
which is not quite incorrect, but 3 is closer to 4 than to 1.
This change has been validated with the kunit from the next patch.
Link: https://lkml.kernel.org/r/20241105145406.554365-1-aardelean@baylibre.com
Fixes: 95d119528b0b ("util_macros.h: add find_closest() macro")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c174b53e95adf2eece2afc56cd9798374919f99a upstream.
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.
Fixes: 9085daa4abcc ("staging: iio: ad7780: add gain & filter gpio support")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac6f420291b3fee1113f21d612fa88b628afab5b ]
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
CC: stable@vger.kernel.org
Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241121123855.645335-2-ojaswin@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 93efb0c656837f4a31d7cc6117a7c8cecc8fadac upstream.
Code at line 967 implies that rsp->fwdata.supported_fec may be up to 4:
967: if (rsp->fwdata.supported_fec <= FEC_MAX_INDEX)
If rsp->fwdata.supported_fec evaluates to 4, then there is an
out-of-bounds read at line 971 because fec is an array with
a maximum of 4 elements:
954 const int fec[] = {
955 ETHTOOL_FEC_OFF,
956 ETHTOOL_FEC_BASER,
957 ETHTOOL_FEC_RS,
958 ETHTOOL_FEC_BASER | ETHTOOL_FEC_RS};
959 #define FEC_MAX_INDEX 4
971: fecparam->fec = fec[rsp->fwdata.supported_fec];
Fix this by properly indexing fec[] with rsp->fwdata.supported_fec - 1.
In this case the proper indexes 0 to 3 are used when
rsp->fwdata.supported_fec evaluates to a range of 1 to 4, correspondingly.
Fixes: d0cf9503e908 ("octeontx2-pf: ethtool fec mode support")
Addresses-Coverity-ID: 1501722 ("Out-of-bounds read")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 101b096bc2549618f18bc08ae3a0e364b3c8fff1 upstream.
Remove the _SHIFT for the mask definition.
Fixes: 17f2142bae4b ("ASoC: fsl_micfil: use GENMASK to define register bit fields")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/1651736047-28809-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63e72e551942642c48456a4134975136cdcb9b3c ]
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded.
Fixes: 2dcec7a988a1 ("sh: intc: set_irq_wake() support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4db9ad82a6c823094da27de4825af693a3475d51 ]
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL.
Fixes: 7196dbb02ea0 ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2790a624d43084de590884934969e19c7a82316a ]
The socket's SOCKWQ_ASYNC_NOSPACE can be cleared by various actors in
the socket layer, so replace it with our own flag in the transport
sock_state field.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 4db9ad82a6c8 ("sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023859ce6f88f7cfc223752fb56ec453a147b852 ]
In rpc_task_set_client(), testing for a NULL clnt is not necessary, as
clnt should always be a valid pointer to a rpc_client.
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 4db9ad82a6c8 ("sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3d0ebc894294ef9454e45a3ac2e9ba60b3351 ]
There are now tools in the refcount library that allow us to convert the
client shutdown code.
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 4db9ad82a6c8 ("sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c71139d9f84c1963b0a416941244502a20a7e52 ]
This comment was introduced by commit 6ea44adce915
("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()").
I believe EIO was a typo at the time: it should have been EAGAIN.
Subsequently, commit 0445f92c5d53 ("SUNRPC: Fix disconnection races")
changed that to ENOTCONN.
Rather than trying to keep the comment here in sync with the code in
xprt_force_disconnect(), make the point in a non-specific way.
Fixes: 6ea44adce915 ("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()")
Signed-off-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 4db9ad82a6c8 ("sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cb7f8f177878b4f22397b9c4d2c8f743766be3 ]
When exporting only one file system with fsid=0 on the server side, the
client alternately uses the ro/rw mount options to perform the mount
operation, and a new vfsmount is generated each time.
It can be reproduced as follows:
[root@localhost ~]# mount /dev/sda /mnt2
[root@localhost ~]# echo "/mnt2 *(rw,no_root_squash,fsid=0)" >/etc/exports
[root@localhost ~]# systemctl restart nfs-server
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount | grep nfs4
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
[root@localhost ~]#
We expected that after mounting with the ro option, using the rw option to
mount again would return EBUSY, but the actual situation was not the case.
As shown above, when mounting for the first time, a superblock with the ro
flag will be generated, and at the same time, in do_new_mount_fc -->
do_add_mount, it detects that the superblock corresponding to the current
target directory is inconsistent with the currently generated one
(path->mnt->mnt_sb != newmnt->mnt.mnt_sb), and a new vfsmount will be
generated.
When mounting with the rw option for the second time, since no matching
superblock can be found in the fs_supers list, a new superblock with the
rw flag will be generated again. The superblock in use (ro) is different
from the newly generated superblock (rw), and a new vfsmount will be
generated again.
When mounting with the ro option for the third time, the superblock (ro)
is found in fs_supers, the superblock in use (rw) is different from the
found superblock (ro), and a new vfsmount will be generated again.
We can switch between ro/rw through remount, and only one superblock needs
to be generated, thus avoiding the problem of repeated generation of
vfsmount caused by switching superblocks.
Furthermore, This can also resolve the issue described in the link.
Fixes: 275a5d24bf56 ("NFS: Error when mounting the same filesystem with different options")
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3e091319e4748cb36ac9a50848903dc6f54054 ]
This function contains multiple bugs after the following commits:
- ac551828993e ("modpost: i2c aliases need no trailing wildcard")
- 6543becf26ff ("mod/file2alias: make modalias generation safe for cross compiling")
Commit ac551828993e inserted the following code to do_eisa_entry():
else
strcat(alias, "*");
This is incorrect because 'alias' is uninitialized. If it is not
NULL-terminated, strcat() could cause a buffer overrun.
Even if 'alias' happens to be zero-filled, it would output:
MODULE_ALIAS("*");
This would match anything. As a result, the module could be loaded by
any unrelated uevent from an unrelated subsystem.
Commit ac551828993e introduced another bug.
Prior to that commit, the conditional check was:
if (eisa->sig[0])
This checked if the first character of eisa_device_id::sig was not '\0'.
However, commit ac551828993e changed it as follows:
if (sig[0])
sig[0] is NOT the first character of the eisa_device_id::sig. The
type of 'sig' is 'char (*)[8]', meaning that the type of 'sig[0]' is
'char [8]' instead of 'char'. 'sig[0]' and 'symval' refer to the same
address, which never becomes NULL.
The correct conversion would have been:
if ((*sig)[0])
However, this if-conditional was meaningless because the earlier change
in commit ac551828993e was incorrect.
This commit removes the entire incorrect code, which should never have
been executed.
Fixes: ac551828993e ("modpost: i2c aliases need no trailing wildcard")
Fixes: 6543becf26ff ("mod/file2alias: make modalias generation safe for cross compiling")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0779a0dcf41a6452ac0a169cd96863feb5787c7 ]
The undervoltage flags reported by the RTC are useful to know if the
time and date are reliable after a reboot. Although the threshold VLOW1
indicates that the thermometer has been shutdown and time compensation
is off, it doesn't mean that the temperature readout is currently
impossible.
As the system is running, the RTC voltage is now fully established and
we can read the temperature.
Fixes: 67075b63cce2 ("rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20241122101031.68916-3-maxime.chevallier@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef3ae82a6ebbf4750967d1ce43bcdb7e44ff74b ]
Large amount of mount hangs observed during hotplugging of 9pfs devices. The
9pfs Xen driver attempts to initialize itself more than once, causing the
frontend and backend to disagree: the backend listens on a channel that the
frontend does not send on, resulting in stalled processing.
Only allow initialization of 9p frontend once.
Fixes: c15fe55d14b3b ("9p/xen: fix connection sequence")
Signed-off-by: Alex Zenla <alex@edera.dev>
Signed-off-by: Alexander Merritt <alexander@edera.dev>
Signed-off-by: Ariadne Conill <ariadne@ariadne.space>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241119211633.38321-1-alexander@edera.dev>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46fd48ab3ea3eb3bb215684bd66ea3d260b091a9 ]
The underlying limit is defined as an unsigned int, so return that from
bdev_io_min as well.
Fixes: ac481c20ef8f ("block: Topology ioctls")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241119072602.1059488-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba44ee966bc3c41dd8a944f963466c8fcc60dc8 ]
When building the kernel with -Wmaybe-uninitialized, the compiler
reports this warning:
In function 'jffs2_mark_erased_block',
inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4:
fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized]
474 | jffs2_erase_failed(c, jeb, bad_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks':
fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here
402 | uint32_t bad_offset;
| ^~~~~~~~~~
When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO
without initializing bad_offset, which is later used at the filebad
label in jffs2_mark_erased_block.
Fix it by initializing this variable.
Fixes: 8a0f572397ca ("[JFFS2] Return values of jffs2_block_check_erase error paths")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4617fb8fc15effe8eda4dd898d4e33eb537a7140 ]
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
rm -f /etc/test-file.bin
dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync
in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then
reports:
BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950
Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x18/0x24
dump_stack_lvl+0x9c/0xbc
print_address_description.constprop.0+0x74/0x2b0
kasan_report+0x1d8/0x1f0
kasan_check_range+0xf8/0x1a0
memcpy+0x84/0xf4
ubifs_tnc_end_commit+0xa5c/0x1950
do_commit+0x4e0/0x1340
ubifs_bg_thread+0x234/0x2e0
kthread+0x36c/0x410
ret_from_fork+0x10/0x20
Allocated by task 401:
kasan_save_stack+0x38/0x70
__kasan_kmalloc+0x8c/0xd0
__kmalloc+0x34c/0x5bc
tnc_insert+0x140/0x16a4
ubifs_tnc_add+0x370/0x52c
ubifs_jnl_write_data+0x5d8/0x870
do_writepage+0x36c/0x510
ubifs_writepage+0x190/0x4dc
__writepage+0x58/0x154
write_cache_pages+0x394/0x830
do_writepages+0x1f0/0x5b0
filemap_fdatawrite_wbc+0x170/0x25c
file_write_and_wait_range+0x140/0x190
ubifs_fsync+0xe8/0x290
vfs_fsync_range+0xc0/0x1e4
do_fsync+0x40/0x90
__arm64_sys_fsync+0x34/0x50
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
Freed by task 403:
kasan_save_stack+0x38/0x70
kasan_set_track+0x28/0x40
kasan_set_free_info+0x28/0x4c
__kasan_slab_free+0xd4/0x13c
kfree+0xc4/0x3a0
tnc_delete+0x3f4/0xe40
ubifs_tnc_remove_range+0x368/0x73c
ubifs_tnc_remove_ino+0x29c/0x2e0
ubifs_jnl_delete_inode+0x150/0x260
ubifs_evict_inode+0x1d4/0x2e4
evict+0x1c8/0x450
iput+0x2a0/0x3c4
do_unlinkat+0x2cc/0x490
__arm64_sys_unlinkat+0x90/0x100
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free
when a node becomes root in TNC but still has a `cparent` to an already
freed node. More specifically, consider the following TNC:
zroot
/
/
zp1
/
/
zn
Inserting a new node `zn_new` with a key smaller then `zn` will trigger
a split in `tnc_insert()` if `zp1` is full:
zroot
/ \
/ \
zp1 zp2
/ \
/ \
zn_new zn
`zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still
points to `zp1`.
Now, consider a removal of all the nodes _except_ `zn`. Just when
`tnc_delete()` is about to delete `zroot` and `zp2`:
zroot
\
\
zp2
\
\
zn
`zroot` and `zp2` get freed and the tree collapses:
zn
`zn` now becomes the new `zroot`.
`get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and
`write_index()` will check its `znode->cparent` that wrongly points to
the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called
with `znode->cparent->zbranch[znode->iip].hash` that triggers the
use-after-free!
Fix this by explicitly setting `znode->cparent` to `NULL` in
`get_znodes_to_commit()` for the root node. The search for the dirty
nodes is bottom-up in the tree. Thus, when `find_next_dirty(znode)`
returns NULL, the current `znode` _is_ the root node. Add an assert for
this.
Fixes: 16a26b20d2af ("ubifs: authentication: Add hashes to index nodes")
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Co-developed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcddf52b7a17adcebc768d26f4e27cf79adb424c ]
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers.
Fixes: d2158f69a7d4 ("UBI: Remove alloc_ai() slab name from parameter list")
Fixes: fdf10ed710c0 ("ubi: Rework Fastmap attach base code")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a2bee9c49769310efa19601157ef50a1df1267 ]
Since commit e874dcde1cbf ("ubifs: Reserve one leb for each journal
head while doing budget"), available space is calulated by deducting
reservation for all journal heads. However, the total block count (
which is only used by statfs) is not updated yet, which will cause
the wrong displaying for used space(total - available).
Fix it by deducting reservation for all journal heads from total
block count.
Fixes: e874dcde1cbf ("ubifs: Reserve one leb for each journal head while doing budget")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ba8a2bc4f60a1065f23d6a0e7cbea945a0f40d ]
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6cd7adec0cf03f0aefc55676e71dd721cbc71a8 ]
If request_irq() fails in st_rtc_probe(), there is no need to enable
the irq, and if it succeeds, disable_irq() after request_irq() still has
a time gap in which interrupts can come.
request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when
request IRQ.
Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912033727.3013951-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fdb05dc0931250574f0cb0ebeb5ed8e20f4a889 ]
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed.
Reported-by: Yang Erkun <yangerkun@huawei.com>
Fixes: 24ac23ab88df ("NFSv4: Convert open() into an asynchronous RPC call")
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
