commit 6aaced5abd32e2a57cd94fd64f824514d0361da8 upstream.
The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.
#0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
#1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
#2 [ffff80002cb6f990] schedule at ffff800008abc50c
#3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
#4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
#5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
#6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4
At this point, the pgdat contains the following two zones:
NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32"
SIZE: 20480 MIN/LOW/HIGH: 11/28/45
VM_STAT:
NR_FREE_PAGES: 359
NR_ZONE_INACTIVE_ANON: 18813
NR_ZONE_ACTIVE_ANON: 0
NR_ZONE_INACTIVE_FILE: 50
NR_ZONE_ACTIVE_FILE: 0
NR_ZONE_UNEVICTABLE: 0
NR_ZONE_WRITE_PENDING: 0
NR_MLOCK: 0
NR_BOUNCE: 0
NR_ZSPAGES: 0
NR_FREE_CMA_PAGES: 0
NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal"
SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264
VM_STAT:
NR_FREE_PAGES: 146
NR_ZONE_INACTIVE_ANON: 94668
NR_ZONE_ACTIVE_ANON: 3
NR_ZONE_INACTIVE_FILE: 735
NR_ZONE_ACTIVE_FILE: 78
NR_ZONE_UNEVICTABLE: 0
NR_ZONE_WRITE_PENDING: 0
NR_MLOCK: 0
NR_BOUNCE: 0
NR_ZSPAGES: 0
NR_FREE_CMA_PAGES: 0
In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.
Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.
crash> p nr_swap_pages
nr_swap_pages = $1937 = {
counter = 0
}
As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.
The problem is that the pgdat->kswapd_failures hasn't been incremented.
crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
$1935 = 0x0
This is because the node deemed balanced. The node balancing logic in
balance_pgdat() evaluates all zones collectively. If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced. This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.
The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages). This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable. By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.
The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL. This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.
The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones. Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().
This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b404a7 ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e86729d1ff329815a6e8a920cb554a1d4cb5b8d upstream.
While by default max_autoclose equals to INT_MAX / HZ, one may set
net.sctp.max_autoclose to UINT_MAX. There is code in
sctp_association_init() that can consequently trigger overflow.
Cc: stable@vger.kernel.org
Fixes: 9f70f46bd4c7 ("sctp: properly latch and use autoclose value from sock to association")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241219162114.2863827-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03c8d0af2e409e15c16130b185e12b5efba0a6b9 upstream.
A Marvell 88E8075 ethernet controller has this device ID instead of
11ab:4370 and works fine with the sky2 driver.
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/10165a62-99fb-4be6-8c64-84afd6234085@plouf.fr.eu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream.
If a device uses MCP23xxx IO expander to receive IRQs, the following
bug can happen:
BUG: sleeping function called from invalid context
at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ...
preempt_count: 1, expected: 0
...
Call Trace:
...
__might_resched+0x104/0x10e
__might_sleep+0x3e/0x62
mutex_lock+0x20/0x4c
regmap_lock_mutex+0x10/0x18
regmap_update_bits_base+0x2c/0x66
mcp23s08_irq_set_type+0x1ae/0x1d6
__irq_set_trigger+0x56/0x172
__setup_irq+0x1e6/0x646
request_threaded_irq+0xb6/0x160
...
We observed the problem while experimenting with a touchscreen driver which
used MCP23017 IO expander (I2C).
The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from
concurrent accesses, which is the default for regmaps without .fast_io,
.disable_locking, etc.
mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter
locks the mutex.
However, __setup_irq() locks desc->lock spinlock before calling these
functions. As a result, the system tries to lock the mutex whole holding
the spinlock.
It seems, the internal regmap locks are not needed in this driver at all.
mcp->lock seems to protect the regmap from concurrent accesses already,
except, probably, in mcp_pinconf_get/set.
mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under
chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes
mcp->lock and enables regmap caching, so that the potentially slow I2C
accesses are deferred until chip_bus_unlock().
The accesses to the regmap from mcp23s08_probe_one() do not need additional
locking.
In all remaining places where the regmap is accessed, except
mcp_pinconf_get/set(), the driver already takes mcp->lock.
This patch adds locking in mcp_pinconf_get/set() and disables internal
locking in the regmap config. Among other things, it fixes the sleeping
in atomic context described above.
Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")
Cc: stable@vger.kernel.org
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/20241209074659.1442898-1-e.shatokhin@yadro.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0257e089d1bbd35c69b6c97ff73e3690ab149a9 upstream.
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications.
Fixes: 67cdb40ca444 ("[IB] uverbs: Implement more commands")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/b8765ab3-c2da-4611-aae0-ddd6ba173d23@stanley.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf36b4bf1b9a7a0015610e2f038ee84ddb085de2 ]
This loop should iterate over the range from 'min' to 'max' inclusively.
The last interation is missed.
Fixes: 1d8f430c15b3 ("[PATCH] Input: add modalias support")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77dc55a978e69625f9718460012e5ef0172dc4de ]
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes: e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: bf36b4bf1b9a ("modpost: fix the missed iteration for the max bit in do_input()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97e86631bccddfbbe0c13f9a9605cdef11d31296 ]
In 196d59ab9ccc "btrfs: switch extent buffer tree lock to rw_semaphore"
the functions for tree read locking were rewritten, and in the process
the read lock functions started setting eb->lock_owner = current->pid.
Previously lock_owner was only set in tree write lock functions.
Read locks are shared, so they don't have exclusive ownership of the
underlying object, so setting lock_owner to any single value for a
read lock makes no sense. It's mostly harmless because write locks
and read locks are mutually exclusive, and none of the existing code
in btrfs (btrfs_init_new_buffer and print_eb_refs_lock) cares what
nonsense is written in lock_owner when no writer is holding the lock.
KCSAN does care, and will complain about the data race incessantly.
Remove the assignments in the read lock functions because they're
useless noise.
Fixes: 196d59ab9ccc ("btrfs: switch extent buffer tree lock to rw_semaphore")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4048daedb910f83f080c6bb03c78af794aebdff5 ]
Now that we're no longer using recursion, rip out all of the supporting
code. Follow up patches will clean up the callers of these functions.
The extent_buffer::lock_owner is still retained as it allows safety
checks in btrfs_init_new_buffer for the case that the free space cache
is corrupted and we try to allocate a block that we are currently using
and have locked in the path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 97e86631bccd ("btrfs: don't set lock_owner when locking extent buffer for reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 824927e88456331c7a999fdf5d9d27923b619590 ]
ARC GCC compiler is packaged starting from Fedora 39i and the GCC
variant of cross compile tools has arc-linux-gnu- prefix and not
arc-linux-. This is causing that CROSS_COMPILE variable is left unset.
This change allows builds without need to supply CROSS_COMPILE argument
if distro package is used.
Before this change:
$ make -j 128 ARCH=arc W=1 drivers/infiniband/hw/mlx4/
gcc: warning: ‘-mcpu=’ is deprecated; use ‘-mtune=’ or ‘-march=’ instead
gcc: error: unrecognized command-line option ‘-mmedium-calls’
gcc: error: unrecognized command-line option ‘-mlock’
gcc: error: unrecognized command-line option ‘-munaligned-access’
[1] https://packages.fedoraproject.org/pkgs/cross-gcc/gcc-arc-linux-gnu/index.html
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1855f1b7c33642c9f7a01991fb763342a312e9b ]
percpu_base is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of percpu_base to
void __iomem * __percpu *percpu_base;
to declare the variable as __percpu pointer.
The patch fixes several sparse warnings:
irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base
There were no changes in the resulting object files.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4441ca86afe4814039ee1b32c39d833c1a16bbc ]
The bpf_remove_insns() function returns WARN_ON_ONCE(error), where
error is a result of bpf_adj_branches(), and thus should be always 0
However, if for any reason it is not 0, then it will be converted to
boolean by WARN_ON_ONCE and returned to user space as 1, not an actual
error value. Fix this by returning the original err after the WARN check.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241210114245.836164-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b50a3e98442b8d72f061617c7f7a71f7dba19484 ]
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 220bf000530f9b1114fa2a1022a871c7ce8a0b38 ]
In case we fail to resume, we'll WARN with
"Hardware became unavailable during restart." and we'll wait until user
space does something. It'll typically bring the interface down and up to
recover. This won't work though because the queues are still stopped on
IEEE80211_QUEUE_STOP_REASON_SUSPEND reason.
Make sure we clear that reason so that we give a chance to the recovery
to succeed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.cd628f560f97.I76a15fdb92de450e5329940125f3c58916be3942@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e3a41187ac01425f5ad1abce927905e4ac44e4 ]
KMSAN complains that new_value at cpumask_parse_user() from
write_irq_affinity() from irq_affinity_proc_write() is uninitialized.
[ 148.133411][ T5509] =====================================================
[ 148.135383][ T5509] BUG: KMSAN: uninit-value in find_next_bit+0x325/0x340
[ 148.137819][ T5509]
[ 148.138448][ T5509] Local variable ----new_value.i@irq_affinity_proc_write created at:
[ 148.140768][ T5509] irq_affinity_proc_write+0xc3/0x3d0
[ 148.142298][ T5509] irq_affinity_proc_write+0xc3/0x3d0
[ 148.143823][ T5509] =====================================================
Since bitmap_parse() from cpumask_parse_user() calls find_next_bit(),
any alloc_cpumask_var() + cpumask_parse_user() sequence has possibility
that find_next_bit() accesses uninitialized cpu mask variable. Fix this
problem by replacing alloc_cpumask_var() with zalloc_cpumask_var().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20210401055823.3929-1-penguin-kernel@I-love.SAKURA.ne.jp
Stable-dep-of: 98feccbf32cf ("tracing: Prevent bad count for tracing_cpumask_write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44f52bbe96dfdbe4aca3818a2534520082a07040 ]
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there.
Reported-by: syzbot+8517da8635307182c8a5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6759a9b9.050a0220.1ac542.000d.GAE@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f93bc4cbcac6121a5ee85cd5019ee8e7447e0b ]
Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is
to allow to move defrag specific code out of ctree.c and into defrag.c in
one of the next patches.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac5887c8e013d6754d36e6d51dc03448ee0b0065 ]
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 196d59ab9ccc975d8d29292845d227cdf4423ef8 ]
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0e870a0e9c5521f2952ea9f3ea9d3d122631a89 ]
The recently submitted fix-commit revealed a problem in the iDMA 32-bit
platform code. Even though the controller supported only a single master
the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs
0 and 1. As a result the sanity check implemented in the commit
b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
got incorrect interface data width and thus prevented the client drivers
from configuring the DMA-channel with the EINVAL error returned. E.g.,
the next error was printed for the PXA2xx SPI controller driver trying
to configure the requested channels:
> [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed
> [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor
> [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16
The problem would have been spotted much earlier if the iDMA 32-bit
controller supported more than one master interfaces. But since it
supports just a single master and the iDMA 32-bit specific code just
ignores the master IDs in the CTLLO preparation method, the issue has
been gone unnoticed so far.
Fix the problem by specifying the default master ID for both memory
and peripheral devices in the driver data. Thus the issue noticed for
the iDMA 32-bit controllers will be eliminated and the ACPI-probed
DW DMA controllers will be configured with the correct master ID by
default.
Cc: stable@vger.kernel.org
Fixes: b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
Fixes: 199244d69458 ("dmaengine: dw: add support of iDMA 32-bit hardware")
Reported-by: Ferry Toth <fntoth@gmail.com>
Closes: https://lore.kernel.org/dmaengine/ZuXbCKUs1iOqFu51@black.fi.intel.com/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/dmaengine/ZuXgI-VcHpMgbZ91@black.fi.intel.com/
Tested-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104095142.157925-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb514b31395946022f13a08e06a435f53cf9e8b3 ]
Move the declaration of the 'ib_sge list' variable outside the
'always_invalidate' block to ensure it remains accessible for use
throughout the function.
Previously, 'ib_sge list' was declared within the 'always_invalidate'
block, limiting its accessibility, then caused a
'BUG: kernel NULL pointer dereference'[1].
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2d0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? memcpy_orig+0xd5/0x140
rxe_mr_copy+0x1c3/0x200 [rdma_rxe]
? rxe_pool_get_index+0x4b/0x80 [rdma_rxe]
copy_data+0xa5/0x230 [rdma_rxe]
rxe_requester+0xd9b/0xf70 [rdma_rxe]
? finish_task_switch.isra.0+0x99/0x2e0
rxe_sender+0x13/0x40 [rdma_rxe]
do_task+0x68/0x1e0 [rdma_rxe]
process_one_work+0x177/0x330
worker_thread+0x252/0x390
? __pfx_worker_thread+0x10/0x10
This change ensures the variable is available for subsequent operations
that require it.
[1] https://lore.kernel.org/linux-rdma/6a1f3e8f-deb0-49f9-bc69-a9b03ecfcda7@fujitsu.com/
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241231013416.1290920-1-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b255ef45fcc2141c1bf98456796abb956d843a27 ]
Check the return value of clk_prepare_enable to ensure that priv->clk has
been successfully enabled.
If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume,
or bcm_sysport_open, it must not be disabled in any subsequent execution
paths.
Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241227123007.2333397-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a024e377efed31ecfb39210bed562932321345b3 ]
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ]
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9272cba0ded71b5a2084da3004ec7806b8cb7fd2 ]
QP table handling is synchronized with destroy QP and Async
event from the HW. The same needs to be synchronized
during create_qp also. Use the same lock in create_qp also.
Fixes: 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array")
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c63e1c4dfc33d1bdae395ee8fbcbfad4830b12c0 ]
While creating qps, the driver adds one extra entry to the sq size passed
by the ULPs in order to avoid queue full condition. When ULPs creates QPs
with max_qp_wr reported, driver creates QP with 1 more than the max_wqes
supported by HW. Create QP fails in this case. To avoid this error, reduce
1 entry in max_qp_wqes and report it to the stack.
Link: https://lore.kernel.org/r/1606741986-16477-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
