[ Upstream commit bd74d4ea29cc3c0520d9af109bb7a7c769325746 ]
This patch adds support to fetch fec stats from PHY. The stats are
put in the shared data struct fwdata. A PHY driver indicates
that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats
Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and
CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync
with firmware's enum list.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e26f8eac6bb2 ("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84c4f9cab4f99e774a8d9bbee299d288bdb2d792 ]
CGX block supports forward error correction modes baseR
and RS. This patch adds support to set encoding mode
and to read corrected/uncorrected block counters
Adds new mailbox handlers set_fec to configure encoding modes
and fec_stats to read counters and also increase mbox timeout
to accomdate firmware command response timeout.
Along with new CGX_CMD_SET_FEC command add other commands to
sync with kernel enum list with firmware.
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e26f8eac6bb2 ("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bcf5ced6526e1c4c8a2703f9ca9135fef7409d6 ]
CGX links are followed by LBK links but number of
CGX and LBK links varies between platforms. Hence
get the number of links present in hardware from
AF and use it to calculate LBK link number.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e26f8eac6bb2 ("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a84cdcea3b4feb46730c88454b5f85e828429c2b ]
This patch puts together all mailbox changes
for 98xx silicon:
Attach ->
Modify resource attach mailbox handler to
request LFs from a block address out of multiple
blocks of same type. If a PF/VF need LFs from two
blocks of same type then attach mbox should be
called twice.
Example:
struct rsrc_attach *attach;
.. Allocate memory for message ..
attach->cptlfs = 3; /* 3 LFs from CPT0 */
.. Send message ..
.. Allocate memory for message ..
attach->modify = 1;
attach->cpt_blkaddr = BLKADDR_CPT1;
attach->cptlfs = 2; /* 2 LFs from CPT1 */
.. Send message ..
Detach ->
Update detach mailbox and its handler to detach
resources from CPT1 and NIX1 blocks.
MSIX ->
Updated the MSIX mailbox and its handler to return
MSIX offsets for the new block CPT1.
Free resources ->
Update free_rsrc mailbox and its handler to return
the free resources count of new blocks NIX1 and CPT1
Links ->
Number of CGX,LBK and SDP links may vary between
platforms. For example, in 98xx number of CGX and LBK
links are more than 96xx. Hence the info about number
of links present in hardware is useful for consumers to
request link configuration properly. This patch sends
this info in nix_lf_alloc_rsp.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e26f8eac6bb2 ("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffcde9e44d3e18fde3d18bfff8d9318935413bfd ]
The PIXCLK needs to be enabled in SCFG before accessing certain DCU
registers, or the access will hang. For simplicity, the PIXCLK is enabled
unconditionally, resulting in increased power consumption.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 109eee2f2a18 ("drm/layerscape: Add Freescale DCU DRM driver")
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926055552.1632448-2-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03ac16e584e496230903ba20f2b4bbfd942a16b4 ]
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-5-tzimmermann@suse.de
Stable-dep-of: ffcde9e44d3e ("drm: fsl-dcu: enable PIXCLK on LS1021A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d241a139c2e9f8a479f25c75ebd5391e6a448500 ]
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d343723c7e1f9f6d64f721f07cfdfc2993758d1 ]
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.
However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.
Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...
Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Fixes: de5e6c027ae6 ("drm/bridge: tc358767: add drm_panel_bridge support")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf567f421dbfe7e53b7e5ddee9400da10efb75d ]
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da875 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55e2f83afb1c142885da63c5a9ce2998b6f6ab21 ]
Make sure that netdevsim relies on direction and not on flags.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Stable-dep-of: 2cf567f421db ("netdevsim: copy addresses for both in and out paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52db16ec5bae7bd027804265b968259d1a6c3970 ]
In supported_vht_mcs_rate_nss2, the rate for MCS9 & VHT20 is defined as
{1560, 1733}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 1730 100kbps nss 2 mcs 9
and:
invalid vht params rate 1920 100kbps nss 2 mcs 9
Change it to {1730, 1920} to align with firmware to fix the issue.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240711020344.98040-3-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d50886b27850447d90c0cd40c725238097909d1e ]
In supported_vht_mcs_rate_nss1, the rate for MCS9 & VHT20 is defined as
{780, 867}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 960 100kbps nss 1 mcs 9
Change it to {865, 960} to align with firmware, so this issue could be
fixed.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240711020344.98040-2-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1becb7f996a0a23ea2c270cf6bb0911ec3ca1a ]
We must first flush the MMU cache and then, flush the TLB, not the other
way around. Currently, we can see a race condition between the MMU cache
and the TLB when running multiple rendering processes at the same time.
This is evidenced by MMU errors triggered by the IRQ.
Fix the MMU flush order by flushing the MMU cache and then the TLB.
Also, in order to address the race condition, wait for the MMU cache flush
to finish before starting the TLB flush.
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-2-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40004709a3d3b07041a473a163ca911ef04ab8bd ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 47b1be5c0f4e ("staging: imx/drm: request irq only after adding the crtc")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1af01e14db7e0b45ae502d822776a58c86688763 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-2-ruanjinjie@huawei.com
[DB: fixed the subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a98dd48b6d834d7a3fe5e8e7b8c3a1d006f9685 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-3-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd1371bd85e560ccc9159b7747f94bfe43b77a6 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: cd8d3d321285 ("p54spi: p54spi driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-2-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6a1c4037227539373c8cf484ace83833e2ad6a2 ]
omap_gem_new_dmabuf() creates the new gem object, and then takes and
holds the omap_obj->lock for the rest of the function. This has two
issues:
- omap_gem_free_object(), which is called in the error paths, also takes
the same lock, leading to deadlock
- Even if the above wouldn't happen, in the error cases
omap_gem_new_dmabuf() still unlocks omap_obj->lock, even after the
omap_obj has already been freed.
Furthermore, I don't think there's any reason to take the lock at all,
as the object was just created and not yet shared with anyone else.
To fix all this, drop taking the lock.
Fixes: 3cbd0c587b12 ("drm/omap: gem: Replace struct_mutex usage with omap_obj private lock")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/511b99d7-aade-4f92-bd3e-63163a13d617@stanley.mountain/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806-omapdrm-misc-fixes-v1-3-15d31aea0831@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8619593634cbdf5abf43f5714df49b04e4ef09ab ]
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240909103855.68006-1-aha310510@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53bd7c1c0077db533472ae32799157758302ef48 ]
The INTERVAL_TREE_DEFINE() uncoditionally provides a bunch of helper
functions which in some cases may be not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../drm/drm_mm.c:152:1: error: unused function 'drm_mm_interval_tree_insert' [-Werror,-Wunused-function]
152 | INTERVAL_TREE_DEFINE(struct drm_mm_node, rb,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
153 | u64, __subtree_last,
| ~~~~~~~~~~~~~~~~~~~~
154 | START, LAST, static inline, drm_mm_interval_tree)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking drm_mm_interval_tree*() functions with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829154640.1120050-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed61c59139509f76d3592683c90dc3fdc6e23cd6 ]
In ia_css_3a_statistics_allocate(), there is no check on the allocation
result of the rgby_data memory. If rgby_data is not successfully
allocated, it may trigger the assert(host_stats->rgby_data) assertion in
ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue.
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104145051.3088231-1-lihuafei1@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63705da3dfc8922a2dbfc3c805a5faadb4416954 ]
This is not defined anywhere, so, solve the ifdefs, getting
rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: ed61c5913950 ("media: atomisp: Add check for rgby_data memory allocation failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 953e549471cabc9d4980f1da2e9fa79f4c23da06 ]
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd99 ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc2331ef81657493c074592c409dac7c3cb8ccc ]
of_parse_phandle_with_args() needs to call of_node_put() to decrement
the refcount of args.np. So, Add the missing of_node_put() in the loop.
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20241024030442.119506-2-zhangzekun11@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a25351e4c7740eb22561a3ee4ef17611c6f410b0 ]
Implement workaround for ERR051198
(https://www.nxp.com/docs/en/errata/IMX8MN_0N14Y.pdf)
PWM output may not function correctly if the FIFO is empty when a new SAR
value is programmed.
Description:
When the PWM FIFO is empty, a new value programmed to the PWM Sample
register (PWM_PWMSAR) will be directly applied even if the current timer
period has not expired. If the new SAMPLE value programmed in the
PWM_PWMSAR register is less than the previous value, and the PWM counter
register (PWM_PWMCNR) that contains the current COUNT value is greater
than the new programmed SAMPLE value, the current period will not flip
the level. This may result in an output pulse with a duty cycle of 100%.
Workaround:
Program the current SAMPLE value in the PWM_PWMSAR register before
updating the new duty cycle to the SAMPLE value in the PWM_PWMSAR
register. This will ensure that the new SAMPLE value is modified during
a non-empty FIFO, and can be successfully updated after the period
expires.
Write the old SAR value before updating the new duty cycle to SAR. This
avoids writing the new value into an empty FIFO.
This only resolves the issue when the PWM period is longer than 2us
(or <500kHz) because write register is not quick enough when PWM period is
very short.
Reproduce steps:
cd /sys/class/pwm/pwmchip1/pwm0
echo 2000000000 > period # It is easy to observe by using long period
echo 1000000000 > duty_cycle
echo 1 > enable
echo 8000 > duty_cycle # One full high pulse will be seen by scope
Fixes: 166091b1894d ("[ARM] MXC: add pwm driver for i.MX SoCs")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241008194123.1943141-1-Frank.Li@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6d654e9f5a97742cfe794b1c4bb5d3fb2d25e98 ]
A prior bugfix that fixes a signed/unsigned error causes
another signed unsigned error.
A situation where log_tbl->size is invalid can cause the
size passed to memblock_reserve to become negative.
log_size from the main event log is an unsigned int, and
the code reduces to the following
u64 value = (int)unsigned_value;
This results in sign extension, and the value sent to
memblock_reserve becomes effectively negative.
Fixes: be59d57f9806 ("efi/tpm: Fix sanity check of unsigned tbl_size being less than zero")
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 328bda09cc91b3d93bc64f4a4dadc44313dd8140 ]
GCC 13 complains about the truncated output of snprintf():
drivers/mmc/host/mmc_spi.c: In function ‘mmc_spi_response_get’:
drivers/mmc/host/mmc_spi.c:227:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^
drivers/mmc/host/mmc_spi.c:227:9: note: ‘snprintf’ output between 26 and 43 bytes into a destination of size 32
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
228 | cmd->opcode, maptype(cmd));
Drop it and fold the string it generates into the only place where it's
emitted - the dev_dbg() call at the end of the function.
Fixes: 15a0580ced08 ("mmc_spi host driver")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241008160134.69934-1-brgl@bgdev.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78261cb08f06c93d362cab5c5034bf5899bc7552 ]
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8cd12678-f44a-4b16-a579-c8f11175ee8c@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16a0a69244240cfa32c525c021c40f85e090557a ]
If request_irq() fails in sr_late_init(), there is no need to enable
the irq, and if it succeeds, disable_irq() after request_irq() still has
a time gap in which interrupts can come.
request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when
request IRQ.
Fixes: 1279ba5916f6 ("OMAP3+: SR: disable interrupt by default")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912034147.3014213-1-ruanjinjie@huawei.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 003c7e01916c5e2af95add9b0cbda2e6163873e8 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9728fb3ce117 ("spi: lpspi: disable lpspi module irq in DMA mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906022828.891812-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5786c88cacbb859f465e8e93c26154585c1008d ]
Having no DMA is not an error. The simplest reason is not having it
configured. SPI will still be usable, so raise a warning instead to
get still some attention.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230531072850.739021-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 003c7e01916c ("spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0309f714a0908e947af1c902cf6a330cb593e75e ]
The sp804 is currently only user selectable if COMPILE_TEST, this was
done by commit dfc82faad725 ("clocksource/drivers/sp804: Add
COMPILE_TEST to CONFIG_ARM_TIMER_SP804") in order to avoid it being
spuriously offered on platforms that won't have the hardware since it's
generally only seen on Arm based platforms. This config is overly
restrictive, while platforms that rely on the SP804 do select it in
their Kconfig there are others such as the Arm fast models which have a
SP804 available but currently unused by Linux. Relax the dependency to
allow it to be user selectable on arm and arm64 to avoid surprises and
in case someone comes up with a use for extra timer hardware.
Fixes: dfc82faad725 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804")
Reported-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-vexpress-sp804-v3-1-0a2d3f7883e4@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f4574dd6dd19eb3e8ab0415a3ae960d04be3a65 ]
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 0309f714a090 ("clocksource/drivers:sp804: Make user selectable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 572b7cf08403b6c67dfe0dc3e0f2efb42443254f ]
If do_cpt_init() fails, a previous dma_alloc_coherent() call needs to be
undone.
Add the needed dma_free_coherent() before returning.
Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19630cf57233e845b6ac57c9c969a4888925467b ]
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b64140c74e954f1db6eae5548ca3a1f41b6fad79 ]
The caam_rsa_set_priv_key_form did not check for memory allocation errors.
Add the checks to the caam_rsa_set_priv_key_form functions.
Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d91ca76b6c426c546542a44c78507b42008c9e ]
The while loop breaks in the first run because of incorrect
if condition. It also causes the statements after the if to
appear dead.
Fix this by changing the condition from if(timeout--) to
if(!timeout--).
This bug was reported by Coverity Scan.
Report:
CID 1600859: (#1 of 1): Logically dead code (DEADCODE)
dead_error_line: Execution cannot reach this statement: udelay(30UL);
Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ec22ac4fe766c6abba845290d5139a3fbe0153b ]
Fix undefined behavior caused by left-shifting a negative value in the
expression:
cap_high ^ (1 << (bad_data_bit - 32))
The variable bad_data_bit ranges from 0 to 63. When it is less than 32,
bad_data_bit - 32 becomes negative, and left-shifting by a negative
value in C is undefined behavior.
Fix this by combining cap_high and cap_low into a 64-bit variable.
[ bp: Massage commit message, simplify error bits handling. ]
Fixes: ea2eb9a8b620 ("EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx")
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-3-86ae6fc2756a@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fe774a93b46bb029b8f6fa9d1f25affa53f06c6 ]
The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx
left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as
32-bits wide the left-shift operation truncates the upper 16 bits of
information during the calculation of the SMC argument.
The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any
potential integer overflow, i.e. loss of data from upper 16 bits.
Fixes: 82413e562ea6 ("EDAC, mellanox: Add ECC support for BlueField DDR4")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20240930151056.10158-1-davthompson@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad980b04f51f7fb503530bd1cb328ba5e75a250e ]
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected.
Fixes: f414de2e2fff ("crypto: caam - use devres to de-initialize QI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a9de2f6fda69d5f105dd8af776856a66abdaa64 ]
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240827101239.22020-1-amishin@t-argos.ru
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c2fb1ca8086eb139b2a551358137525ae8e0d7a ]
The HMB descriptor table is sized to the maximum number of descriptors
that could be used for a given device, but __nvme_alloc_host_mem could
break out of the loop earlier on memory allocation failure and end up
using less descriptors than planned for, which leads to an incorrect
size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors
tends to be low and the dma coherent allocator always allocates and
frees at least a page.
Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c2fd76048e95dd267055b5f5e0a48e6e7c81fd9 ]
On an NVMe namespace that does not support metadata, it is possible to
send an IO command with metadata through io-passthru. This allows issues
like [1] to trigger in the completion code path.
nvme_map_user_request() doesn't check if the namespace supports metadata
before sending it forward. It also allows admin commands with metadata to
be processed as it ignores metadata when bdev == NULL and may report
success.
Reject an IO command with metadata when the NVMe namespace doesn't
support it and reject an admin command if it has metadata.
[1] https://lore.kernel.org/all/mb61pcylvnym8.fsf@amazon.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Puranjay Mohan <pjy@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ Move the changes from nvme_map_user_request() to nvme_submit_user_cmd()
to make it work on 5.10 ]
Signed-off-by: Puranjay Mohan <pjy@amazon.com>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e53e4a66bc7430dd2d11c18a86410e3a38d2940 ]
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e694d2b5c58ba2d1e995d068707c8d966e7f5f2a ]
devm_kasprintf() can return a NULL pointer on failure but this
returned value in qcom_socinfo_probe() is not checked.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20240929072349.202520-1-hanchunchao@inspur.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4aebaf6e6efff548b01a3dc49b4b9074751c15b upstream.
When CONFIG_DVB_DYNAMIC_MINORS, ret is not initialized, and a
semaphore is left at the wrong state, in case of errors.
Make the code simpler and avoid mistakes by having just one error
check logic used weather DVB_DYNAMIC_MINORS is used or not.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410201717.ULWWdJv8-lkp@intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9e067488d8935b8cf00959764a1fa5de85d65725.1730926254.git.mchehab+huawei@kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
