[ Upstream commit b7bcea9c27b3d87b54075735c870500123582145 ]
While converting struct ieee80211_tim_ie::virtual_map to be a flexible
array it was observed that the TIM IE processing in cw1200_rx_cb()
could potentially process a malformed IE in a manner that could result
in a buffer over-read. Add logic to verify that the TIM IE length is
large enough to hold a valid TIM payload before processing it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831-ieee80211_tim_ie-v3-1-e10ff584ab5d@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b5127fa134fe0284d58877b6b3133939c8b3ce ]
In ssb_calc_clock_rate(), there is a potential issue where the value of
m1 could be zero due to initialization using clkfactor_f6_resolv(). This
situation raised concerns about the possibility of a division by zero
error.
We fixed it by following the suggestions provided by Larry Finger
<Larry.Finger@lwfinger.net> and Michael Büsch <m@bues.ch>. The fix
involves returning a value of 1 instead of 0 in clkfactor_f6_resolv().
This modification ensures the proper functioning of the code and
eliminates the risk of division by zero errors.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230904232346.34991-1-rand.sec96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5e816d00a506719e9dbb1a9c861c5ced30a109 ]
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8445d9d3c03101859663d34fda747f6a50947556 ]
Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.
So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.
Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa63c6434b6f6aaf9d8d599dc899bc0a074cc0ad ]
The VSC73xx has a busy flag used during MDIO operations. It is raised
when MDIO read/write operations are in progress. Without it, PHYs are
misconfigured and bus operations do not work as expected.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb7e33d01db3aec128590391b2397384bab406b6 ]
Switch the delay loop during the Arbiter empty check from
vsc73xx_adjust_link() to use read_poll_timeout(). Functionally,
one msleep() call is eliminated at the end of the loop in the timeout
case.
As Russell King suggested:
"This [change] avoids the issue that on the last iteration, the code reads
the register, tests it, finds the condition that's being waiting for is
false, _then_ waits and end up printing the error message - that last
wait is rather useless, and as the arbiter state isn't checked after
waiting, it could be that we had success during the last wait."
Suggested-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b9eebc2c7a5f0cc7950d918c1e8a4ad4bed5010 ]
In the 'vsc73xx_phy_write' function, the register value is missing,
and the phy write operation always sends zeros.
This commit passes the value variable into the proper register.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff2f816e2aa65ca9a1cdf0954842f8173c0f48d ]
In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9a18e8f770c9b0703dab93580d0b02e199a4c79 ]
We can't dereference "skb" after calling vcc->push() because the skb
is released.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc796be1779c4dbc9a482c7233995e2a8b6bfb3 ]
Previously, an ethtool rx flow with no attrs would not be added to the
NIC as it has no rules to configure the hw with, but it would be
reported as successful to the caller (return code 0). This is confusing
for the user as ethtool then reports "Added rule $num", but no rule was
actually added.
This change corrects that by instead reporting these wrong rules as
-EINVAL.
Fixes: b29c61dac3a2 ("net/mlx5e: Ethtool steering flow validation refactoring")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1023f5634b9bfcbfff0dc200245309e3cde9b54 upstream.
bitmap_size() is a pretty generic name and one may want to use it for
a generic bitmap API function. At the same time, its logic is not
"generic", i.e. it's not just `nbits -> size of bitmap in bytes`
converter as it would be expected from its name.
Add the prefix 'idset_' used throughout the file where the function
resides.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e414a304f2c5368a84f03ad34d29b89f965a33c9 upstream.
This needs to be set as well if the IB uses atomics.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 35c628774e50b3784c59e8ca7973f03bcb067132)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0573a1e2ea7e35bff08944a40f1adf2bb35cea61 upstream.
Missing validation ...
Checked libdrm and it clears all the structs, so we should be
safe to just check everything.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c6b86421f1f9ddf9d706f2453159813ee39d0cf9)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream.
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faada2174c08662ae98b439c69efe3e79382c538 upstream.
kmalloc is unreliable when allocating more than 8 pages of memory. It may
fail when there is plenty of free memory but the memory is fragmented.
Zdenek Kabelac observed such failure in his tests.
This commit changes kmalloc to kvmalloc - kvmalloc will fall back to
vmalloc if the large allocation fails.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a636b4f03af9d541205f69e373672e7b2b60a8a upstream.
If the dm_resume method is called on a device that is not suspended, the
method will suspend the device briefly, before resuming it (so that the
table will be swapped).
However, there was a bug that the return value of dm_suspended_md was not
checked. dm_suspended_md may return an error when it is interrupted by a
signal. In this case, do_resume would call dm_swap_table, which would
return -EINVAL.
This commit fixes the logic, so that error returned by dm_suspend is
checked and the resume operation is undone.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7db4042336580dfd75cb5faa82c12cd51098c90b upstream.
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case.
Cc: stable@vger.kernel.org # 5.3+
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2006140ad2e01a02ed0aff49cc2ae3ceeb11f8d upstream.
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af8e119f52e9c13e556be9e03f27957554a84656 upstream.
re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.
Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().
On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware
If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth
[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c
Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/
Cc: stable@vger.kernel.org
Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c84bde4f37ba27d50e4c70ecacd33fe4a57030d upstream.
This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c.
This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.
Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.
As we have no explanation yet, revert.
$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.701179] dw2102: start downloading DW210X firmware
[ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 6.756432] usb 1-1: USB disconnect, device number 2
[ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.862245] dw2102: start downloading DW210X firmware
[ 6.914811] usb 4-1: USB disconnect, device number 2
[ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[ 7.014538] usbcore: registered new interface driver dw2102
Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/
Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0823dc64586ba5ea13a7d200a5d33e4c5fa45950 ]
remap_pfn_page() should not be called in the fault handler as it may
change the vma->flags which may trigger lockdep warning since the vma
write lock is not held. Actually there's no need to modify the
vma->flags as it has been set in the mmap(). So this patch switches to
use vmf_insert_pfn() instead.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240701033159.18133-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 729ce5a5bd6fda5eb2322a39db2287f1f26f92f3 ]
it's a nice refactor to make use of
PFN_PHYS/PFN_UP/PFN_DOWN helper macro
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210802013717.851-1-caihuoqing@baidu.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 0823dc64586b ("vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab091ec536cb7b271983c0c063b17f62f3591583 upstream.
There is a hardware power-saving problem with the Lenovo N60z
board. When turn it on and leave it for 10 hours, there is a
20% chance that a nvme disk will not wake up until reboot.
Link: https://lore.kernel.org/all/2B5581C46AC6E335+9c7a81f1-05fb-4fd0-9fbb-108757c21628@uniontech.com
Signed-off-by: hmy <huanglin@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f36851c36b30f713f588ed2b60aa7b4512e2c76 upstream.
Entity controls should get_cur using an entity-defined function
instead of via a query. Fix this in uvc_ctrl_set.
Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur")
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bdd9ef7e9b1b2a73e394712b72b22055e0e26c3 upstream.
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11a1f4bc47362700fcbde717292158873fb847ed upstream.
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler()
Fixes: 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.de
Reported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecde5db1598aecab54cc392282c15114f526f05f upstream.
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update mgag200 accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e82290a2e0e8ec5e836ecad1ca025021b3855c2d upstream.
Address only transactions without any data are valid and should not
be flagged as short transactions. Simply return the message size when
no transaction errors occured.
CC: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream.
Round constant_charge_voltage writes down to the first supported lower
value, rather then rounding them up to the first supported higher value.
This fixes e.g. writing 4250000 resulting in a value of 4350000 which
might be dangerous, instead writing 4250000 will now result in a safe
4200000 value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream.
info->max_cv is in millivolts, divide the microvolt value being written
to constant_charge_voltage by 1000 *before* clamping it to info->max_cv.
Before this fix the code always tried to set constant_charge_voltage
to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V
which is the lowest supported value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d73f0f49daa84176c3beee1606e73c7ffb6af8b2 upstream.
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 upstream.
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Rule: add
Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com
Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 ]
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD
hosts).
scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6
scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11)
scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0)
scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0)
scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
sd 18:0:0:0: Attached scsi generic sg2 type 20
sd 18:0:0:0: [sdc] Host-managed zoned block device
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050]
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050]
mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset.
mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready
mpt3sas_cm0: fault_state(0x2666)!
mpt3sas_cm0: sending diag reset !!
mpt3sas_cm0: diag reset: SUCCESS
sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed
sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK
sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B)
Avoid such issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by
introducing the helper function _base_scsi_dma_map() and using this helper
in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling
directly scsi_dma_map().
Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c25422d34b4726b2707d5f38560943155a91b80 ]
When scsi_dma_map() fails by returning a sges_left value less than zero,
the amount of logging produced can be extremely high. In a recent end-user
environment, 1200 messages per second were being sent to the log buffer.
This eventually overwhelmed the system and it stalled.
These error messages are not needed. Remove them.
Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 82dbb57ac8d0 ("scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c upstream.
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab9fd06cb8f0db0854291833fc40c789e43a361f upstream.
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a444bea37e2759549ef72bfe83d1c8712e76b3d upstream.
Upstream commit aba3a8d01d62 ("usb: gadget: u_serial: add suspend
resume callbacks") added started_delayed flag, so that new ports
which are opened after USB suspend can start IO while resuming.
But if the port was already opened, and gadget suspend kicks in
afterwards, start_delayed will never be set. This causes resume
to bail out before calling gs_start_io(). Fix this by setting
start_delayed during suspend.
Fixes: aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240730125754.576326-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 973a57891608a98e894db2887f278777f564de18 upstream.
Make sure the descriptor has been set before looking at maxpacket.
This fixes a null pointer panic in this case.
This may happen if the gadget doesn't properly set up the endpoint
for the current speed, or the gadget descriptors are malformed and
the descriptor for the speed/endpoint are not found.
No current gadget driver is known to have this problem, but this
may cause a hard-to-find bug during development of new gadgets.
Fixes: 54f83b8c8ea9 ("USB: gadget: Reject endpoints with 0 maxpacket value")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240725010419.314430-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00af4f3dda1461ec90d892edc10bec6d3c50c554 upstream.
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".
Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[ johan: amend summary; disable also ECHONL ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afdcfd3d6fcdeca2735ca8d994c5f2d24a368f0a upstream.
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240709113851.14691-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 113fd6372a5bb3689aba8ef5b8a265ed1529a78f upstream.
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: cf13909aee05 ("drm/fb-helper: Move out modeset config code")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]
The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.
Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.
So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c29f710c1ff2590109f83be3e212b86c01e0f3 ]
If a SMBus alert is received and the originating device is not found,
the reason may be that the address reported on the SMBus alert address
is corrupted, for example because multiple devices asserted alert and
do not correctly implement SMBus arbitration.
If this happens, call alert handlers on all devices connected to the
given I2C bus, in the hope that this cleans up the situation.
This change reliably fixed the problem on a system with multiple devices
on a single bus. Example log where the device on address 0x18 (ADM1021)
and on address 0x4c (ADT7461A) both had the alert line asserted:
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
lm90 3-0018: temp1 out of range, please check!
lm90 3-0018: Disabling ALERT#
lm90 3-0029: Everything OK
lm90 3-002a: Everything OK
lm90 3-004c: temp1 out of range, please check!
lm90 3-004c: temp2 out of range, please check!
lm90 3-004c: Disabling ALERT#
Fixes: b5527a7766f0 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: fixed a typo in the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c526f00bc1c4f847fc800085f8f009d2e11be6 ]
The following messages were observed while testing alert functionality
on systems with multiple I2C devices on a single bus if alert was active
on more than one chip.
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
and:
smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0
Once it starts, this message repeats forever at high rate. There is no
device at any of the reported addresses.
Analysis shows that this is seen if multiple devices have the alert pin
active. Apparently some devices do not support SMBus arbitration correctly.
They keep sending address bits after detecting an address collision and
handle the collision not at all or too late.
Specifically, address 0x0c is seen with ADT7461A at address 0x4c and
ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is
seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is
active on both chips.
Once the system is in bad state (alert is set by more than one chip),
it often only recovers by power cycling.
To reduce the impact of this problem, abort the endless loop in
smbus_alert() if the same address is read more than once and not
handled by a driver.
Fixes: b5527a7766f0 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: it also fixed an interrupt storm in one of my experiments]
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: rebased, moved a comment as well, improved the 'invalid' value]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf365071ea92b9579d5a272679b74052a5643e35 ]
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e3d55fbd160b3ca376599a68b4cddfdc67d4153 ]
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has
the same 8 service intervals per millisecond as High Speed, hence its
calculations are wrong.
Assume that all speeds from HS up use 8 intervals per millisecond.
No further changes are needed, updated code has been confirmed to work
with all speeds from FS to SS.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cd7c25f6f0576073b3d03bc4cfb1e8ca63a1195 ]
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5
standard, and fill the PTS and SCR fields with invalid data if the
package does not contain data.
"STC must be captured when the first video data of a video frame is put
on the USB bus."
Some SunplusIT devices send, e.g.,
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
While the UVC specification meant that the first two packets shouldn't
have had the SCR bit set in the header.
This borderline/buggy interpretation has been implemented in a variety
of devices, from directly SunplusIT and from other OEMs that rebrand
SunplusIT products. So quirking based on VID:PID will be problematic.
All the affected modules have the following extension unit:
VideoControl Interface Descriptor:
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
But the vendor plans to use that GUID in the future and fix the bug,
this means that we should use heuristic to figure out the broken
packets.
This patch takes care of this.
lsusb of one of the affected cameras:
Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1bcf Sunplus Innovation Technology Inc.
idProduct 0x2a01
bcdDevice 0.02
iManufacturer 1 SunplusIT Inc
iProduct 2 HanChen Wise Camera
iSerial 3 01.00.00
bNumConfigurations 1
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19fb10085a49b77578314f69fff21562f7cd054 ]
Check the pointer value to fix potential null pointer
dereference
Acked-by: Yang Wang<kevinyang.wang@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c11d30c95576937c6c35e6f29884761f2dddb43 ]
Check ras_manager before using it
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bad28cfc30988a845fb3f59a99f4b8a4ce8fe95 ]
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoiding a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a231eed10ed5a290129fda36ad7bcc263c53ff7d ]
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoid a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db19d3aa77612983a02bd223b3f273f896b243cf ]
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tick_check_broadcast_expired+0xc/0x40
lr : cpu_idle_poll.isra.0+0x8c/0x168
sp : ffff800081c63d70
x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
Call trace:
tick_check_broadcast_expired+0xc/0x40
do_idle+0x9c/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x11c
do_one_initcall+0x0/0x260
__primary_switched+0x80/0x88
rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=262
rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xbc/0x100
__schedule+0x358/0xbe0
schedule+0x48/0x148
schedule_timeout+0xc4/0x138
rcu_gp_fqs_loop+0x12c/0x764
rcu_gp_kthread+0x208/0x298
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49 ]
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8768a134518e406d41799a3594aeb74e0889cf7 ]
The deletion of safemode_timer in mddev_suspend() is redundant and
potentially harmful now. If timer is about to be woken up but gets
deleted, 'in_sync' will remain 0 until the next write, causing array
to stay in the 'active' state instead of transitioning to 'clean'.
Commit 0d9f4f135eb6 ("MD: Add del_timer_sync to mddev_suspend (fix
nasty panic))" introduced this deletion for dm, because if timer fired
after dm is destroyed, the resource which the timer depends on might
have been freed.
However, commit 0dd84b319352 ("md: call __md_stop_writes in md_stop")
added __md_stop_writes() to md_stop(), which is called before freeing
resource. Timer is deleted in __md_stop_writes(), and the origin issue
is resolved. Therefore, delete safemode_timer can be removed safely now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240508092053.1447930-1-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3862093ee93fcfbdadcb7957f5f8974fffa806a ]
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6be6cba9c4371d27f78d900ccfe34bb880d9ee20 ]
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into virtual
address space as a contiguous region and determines the address of a node
by using the node ID as index.
mbigen chip
|-----------------|------------|--------------|
mgn_node_0 mgn_node_1 ... mgn_node_i
|--------------| |--------------| |----------------------|
[0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1]
This works correctly up to 10 nodes, but then fails because the 11th's
array slot is used for the MGN_CLEAR registers.
mbigen chip
|-----------|--------|--------|---------------|--------|
mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i
|-----------------|
[0xA000, 0xAFFF]
Skip the MGN_CLEAR register space when calculating the offset for node IDs
greater than or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 08f3a5c38087d1569e982a121aad1e6acbf145ce upstream.
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.
This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0d17d696dfce77c9abc830e4ac2d677890a2dad upstream.
The pen ID, 0x80842, was not the correct ID for wacom driver to
treat. The ID was corrected to 0x8842.
Also, 0x4200 was not the expected ID used on any Wacom device.
Therefore, 0x4200 was removed.
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.wacom@gmail.com>
Fixes: bfdc750c4cb2 ("HID: wacom: add three styli to wacom_intuos_get_tool_type")
Cc: stable@kernel.org #6.2
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://patch.msgid.link/20240709055729.17158-1-tatsunosuke.wacom@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df615907f1bf907260af01ccb904d0e9304b5278 upstream.
The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.
The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.
Fixes: f74c7557ed0d ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure")
Cc: stable@vger.kernel.org
Signed-off-by: Patryk Duda <patrykd@google.com>
Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3f8e82a020a5c22f9b791f4ac499b8e18007fbda ]
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.
Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb372a505a994cb39aa75acfb8b3bcf94787cf94 ]
This code was never updated to support Screen Targets.
Fixes a bug where Xv playback displays a green screen instead of actual
video contents when 3D acceleration is disabled in the guest.
Fixes: c8261a961ece ("vmwgfx: Major KMS refactoring / cleanup in preparation of screen targets")
Reported-by: Doug Brown <doug@schmorgal.com>
Closes: https://lore.kernel.org/all/bd9cb3c7-90e8-435d-bc28-0e38fee58977@schmorgal.com
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Tested-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719163627.20888-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9bf3efc33f1fbf88787a277f7349459283c9b95 ]
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and
hence the backing ttm_bo) leads to a refcount underflow.
Instead of calling nouveau_bo_ref() in the unwind path of
drm_gem_object_init(), clean things up manually.
Fixes: ab9ccb96a6e6 ("drm/nouveau: use prime helpers")
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-2-dakr@kernel.org
(cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5)
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa26ca8b786888673689ccc9da6094150939982 ]
In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts
number of phandles. But phandles may be empty. So of_parse_phandle() in
the parsing loop (0 < a < nph) may return NULL which is later dereferenced.
Adjust this issue by adding NULL-return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru
[Fixed title to fit within the prescribed 70-75 charcters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe670e23af91d8a74a8d7049f6e0984bbf6ea11 ]
vdev regions are typically named vdev0buffer, vdev0ring0, vdev0ring1 and
etc. Change to strncmp to cover them all.
Fixes: 8f2d8961640f ("remoteproc: imx_rproc: ignore mapping vdev regions")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-5-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 2fa26ca8b786 ("remoteproc: imx_rproc: Skip over memory region when node value is NULL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2d8961640f0346cbe892273c3260a0d30c1931 ]
vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar.
They are handled by remoteproc common code, no need to map in imx
rproc driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1615029865-23312-10-git-send-email-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 2fa26ca8b786 ("remoteproc: imx_rproc: Skip over memory region when node value is NULL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33b1c47d1fc0b5f06a393bb915db85baacba18ea ]
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ]
Fixes: 0136afa08967 ("irqchip: Add driver for imx-irqsteer controller")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4730d2233311d86cad9dc510318d1b40e4b53cf2 ]
There are now SoCs that integrate the irqsteer controller within
a separate power domain. In order to allow this domain to be
powered down when not needed, add runtime PM support to the driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406163701.1277930-2-l.stach@pengutronix.de
Stable-dep-of: 33b1c47d1fc0 ("irqchip/imx-irqsteer: Handle runtime power management correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd50a974097bb82d52a458bd3ee39fb723129a0c ]
It will cause memory leakage when use driver API devm_free_percpu()
to free memory allocated by devm_alloc_percpu(), fixed by using
devres_release() instead of devres_destroy() within devm_free_percpu().
Fixes: ff86aae3b411 ("devres: add devm_alloc_percpu()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/1719931914-19035-3-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7aa44f5a1f86cb40659eef06035d8d92604b9d5 ]
Sparse is not happy:
drivers/base/devres.c:1230:9: warning: cast removes address space '__percpu' of expression
Use __force attribute to make it happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210401171030.60527-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bd50a974097b ("devres: Fix memory leakage caused by driver API devm_free_percpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b003e14801cf85a8cebeddc87bc9fc77100fdce ]
Currently return status is not getting checked for get_api_version
and because of that for x86 arch we are getting below smatch error.
CC drivers/soc/xilinx/zynqmp_power.o
drivers/soc/xilinx/zynqmp_power.c: In function 'zynqmp_pm_probe':
drivers/soc/xilinx/zynqmp_power.c:295:12: warning: 'pm_api_version' is
used uninitialized [-Wuninitialized]
295 | if (pm_api_version < ZYNQMP_PM_VERSION)
| ^
CHECK drivers/soc/xilinx/zynqmp_power.c
drivers/soc/xilinx/zynqmp_power.c:295 zynqmp_pm_probe() error:
uninitialized symbol 'pm_api_version'.
So, check return status of pm_get_api_version and return error in case
of failure to avoid checking uninitialized pm_api_version variable.
Fixes: b9b3a8be28b3 ("firmware: xilinx: Remove eemi ops for get_api_version")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240515112345.24673-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fd890b89dea55eb5866640eb8befad26d558161 ]
PM_INIT_FINALIZE tells the PMU FW that Linux is able to handle the power
management nodes that are provided by the PMU FW. Nodes that are not
requested are shut down after this call.
Calling PM_INIT_FINALIZE from the zynqmp_power driver is wrong. The PM
node request mechanism is implemented in the zynqmp_pm_domains driver,
which must also call PM_INIT_FINALIZE.
Due to the behavior of the PMU FW, all devices must be powered up before
PM_INIT_FINALIZE is called, because otherwise the devices might
misbehave. Calling PM_INIT_FINALIZE from the sync_state device callback
ensures that all users probed successfully before the PMU FW is allowed
to power off unused domains.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-2-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Stable-dep-of: 9b003e14801c ("drivers: soc: xilinx: check return status of get_api_version()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31fad1470389666ac7169fe43aa65bf5b7e2cfd ]
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference.
Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3233b94cf842984ea7e208d5be1ad2f2af02d495 ]
We'll need it for batched submit as well. Since we now have a copy
helper, get rid of the nvme_submit_cmd() wrapper.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c31fad147038 ("nvme-pci: add missing condition check for existence of mapped data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dbebae2e3c338122716914fe105458f41e3a4a ]
The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correctly converted from host byte-order in the lone caller,
stmmac_vlan_update().
However, the implementations of this caller, dwxgmac2_update_vlan_hash()
and dwxgmac2_update_vlan_hash(), both treat this parameter as host byte
order, using the following pattern:
u32 value = ...
...
writel(value | perfect_match, ...);
This is not correct because both:
1) value is host byte order; and
2) writel expects a host byte order value as it's first argument
I believe that this will break on big endian systems. And I expect it
has gone unnoticed by only being exercised on little endian systems.
The approach taken by this patch is to update the callback, and it's
caller to simply use a host byte order value.
Flagged by Sparse.
Compile tested only.
Fixes: c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba359c0cd6eb5ea772125a7aededb4a2d516684 ]
RCU use in bond_should_notify_peers() looks wrong, since it does
rcu_dereference(), leaves the critical section, and uses the
pointer after that.
Luckily, it's called either inside a nested RCU critical section
or with the RTNL held.
Annotate it with rcu_dereference_rtnl() instead, and remove the
inner RCU critical section.
Fixes: 4cb4f97b7e36 ("bonding: rebuild the lock use for bond_mii_monitor()")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240719094119.35c62455087d.I68eb9c0f02545b364b79a59f2110f2cf5682a8e2@changeid
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2237ceb71f89837ac47c5dce2aaa2c2b3a337a3c upstream.
Every time a watch is reestablished after getting lost, we need to
update the cookie which involves quiescing exclusive lock. For this,
we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING
roughly for the duration of rbd_reacquire_lock() call. If the mapping
is exclusive and I/O happens to arrive in this time window, it's failed
with EROFS (later translated to EIO) based on the wrong assumption in
rbd_img_exclusive_lock() -- "lock got released?" check there stopped
making sense with commit a2b1da09793d ("rbd: lock should be quiesced on
reacquire").
To make it worse, any such I/O is added to the acquiring list before
EROFS is returned and this sets up for violating rbd_lock_del_request()
precondition that the request is either on the running list or not on
any list at all -- see commit ded080c86b3f ("rbd: don't move requests
to the running list on errors"). rbd_lock_del_request() ends up
processing these requests as if they were on the running list which
screws up quiescing_wait completion counter and ultimately leads to
rbd_assert(!completion_done(&rbd_dev->quiescing_wait));
being triggered on the next watch error.
Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
Cc: stable@vger.kernel.org
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5c466a0fdb2d9f3650d2e3911b0735f17ba00cf upstream.
... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that
this state and the associated completion are backing rbd_quiesce_lock(),
which isn't specific to releasing the lock.
While exclusive lock does get quiesced before it's released, it also
gets quiesced before an attempt to update the cookie is made and there
the lock is not released as long as ceph_cls_set_cookie() succeeds.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f4e62730a91572b7fdc657f7bb747e107ae308 upstream.
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the required
governor module not being included in the initial ramdisk. Thus, let's mark
simple_ondemand governor as a softdep for Panfrost, to have its kernel module
included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or has forced users
to introduce some unnecessary workarounds. [3]
For future reference, not having support for the simple_ondemand governor in
the initial ramdisk produces errors in the kernel log similar to these below,
which were taken from a Pine64 RockPro64:
panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq
panfrost ff9a0000.gpu: Fatal error during GPU init
panfrost: probe of ff9a0000.gpu failed with error -22
Having simple_ondemand marked as a softdep for Panfrost may not resolve this
issue for all Linux distributions. In particular, it will remain unresolved
for the distributions whose utilities for the initial ramdisk generation do
not handle the available softdep information [4] properly yet. However, some
Linux distributions already handle softdeps properly while generating their
initial ramdisks, [5] and this is a prerequisite step in the right direction
for the distributions that don't handle them properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066
[3] https://forum.pine64.org/showthread.php?tid=15458
[4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[5] 97ac4d37aa
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Furkan Kardame <f.kardame@manjaro.org>
Cc: stable@vger.kernel.org
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ceccb14f5576e02b81cc8b105ab81f224bd87f6 upstream.
Expanding on the previous commit, assuming that rbd_is_lock_owner()
always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED
or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too.
In case ceph_cls_set_cookie() fails, the lock would be temporarily
released even if the mapping is exclusive, meaning that we can end up
even in RBD_LOCK_STATE_UNLOCKED.
IOW, exclusive mappings are really "just" about disabling automatic
lock transitions (as documented in the man page), not about grabbing
the lock and holding on to it whatever it takes.
Cc: stable@vger.kernel.org
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aee2424246f9f1dadc33faa78990c1e2eb7826e4 upstream.
iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with
an existing struct iw_cm_id (cm_id) as follows:
conn_id->cm_id.iw = cm_id;
cm_id->context = conn_id;
cm_id->cm_handler = cma_iw_handler;
rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make
sure that cm_work_handler() does not trigger a use-after-free by only
freeing of the struct rdma_id_private after all pending work has finished.
Cc: stable@vger.kernel.org
Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref")
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-6-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4d430db17b4ef4e9c3c352a04b2fe3c93011978 upstream.
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70f1ae5f0e7f44edf842444044615da7b59838c1 upstream.
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of
bytes read/written on success, fix to return 0 on success and negative on
failure.
Fixes: c3544f6f51ed ("rtc: isl1208: Add new style nvmem support to driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29e222085d8907ccff18ecd931bdd4c6b1f11b92 upstream.
Link up failure is observed as a result of flash read failure. Current
code does not check flash read return code where it relies on FW checksum
to detect the problem.
Add check of flash read failure to detect the problem sooner.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202406210815.rPDRDMBi-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c184baccf0d5e2ef4cc1562261d0e48508a1c2b upstream.
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
cmos_nvram_read()/cmos_nvram_write() currently return the number of
bytes read or written, fix to return 0 on success and -EIO incase number
of bytes requested was not read or written.
Fixes: 8b5b7958fd1c ("rtc: cmos: use generic nvmem")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240612083635.1253039-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c884e3249f753dcef7a2b2023541ac1dc46b318e upstream.
Driver API devm_krealloc() calls alloc_dr() with wrong argument
@total_new_size, so causes more memory to be allocated than required
fix this memory waste by using @new_size as the argument for alloc_dr().
Fixes: f82485722e5d ("devres: provide devm_krealloc()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/1719931914-19035-2-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 745d9f4a31defec731119ee8aad8ba9f2536dd9a upstream.
In case of a memory allocation failure in the volumes loop we can only
process the already allocated scan_eba and fm_eba array elements on the
error path - others are still uninitialized.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 00abf3041590 ("UBI: Add self_check_eba()")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a83b22754e351f13fb46596c85f667dc33da71ec upstream.
The flag attribute of the struct clk_init_data isn't initialized before
the devm_clk_hw_register() call. This can lead to unexpected behavior
during registration.
Initialize the entire clk_init_data to zero at declaration.
Cc: stable@vger.kernel.org
Fixes: 58e1e2d2cd89 ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240718115534.41513-1-bastien.curutchet@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce2065c4cc4f05635413f63f6dc038d7d4842e31 upstream.
Firmware only supports single DSDs in ELS Pass-through IOCB (0x53h), sg cnt
is decided by the SCSI ML. User is not aware of the cause of an acutal
error.
Return the appropriate return code that will be decoded by API and
application and proper error message will be displayed to user.
Fixes: 6e98016ca077 ("[SCSI] qla2xxx: Re-organized BSG interface specific code.")
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31643d84b8c3d9c846aa0e20bc033e46c68c7e7d upstream.
With the introduction of binder_available_for_proc_work_ilocked() in
commit 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") a binder
thread can only "wait_for_proc_work" after its thread->looper has been
marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}.
This means an unregistered reader risks waiting indefinitely for work
since it never gets added to the proc->waiting_threads. If there are no
further references to its waitqueue either the task will hang. The same
applies to readers using the (e)poll interface.
I couldn't find the rationale behind this restriction. So this patch
restores the previous behavior of allowing unregistered threads to
"wait_for_proc_work". Note that an error message for this scenario,
which had previously become unreachable, is now re-enabled.
Fixes: 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue")
Cc: stable@vger.kernel.org
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240711201452.2017543-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 840b7a5edf88fe678c60dee88a135647c0ea4375 upstream.
Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition
for ep_gpio. This means, whatever the logical value set by the driver for
the ep_gpio, physical line will output the same logic level.
For instance,
gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low
gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high
But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used.
Now, this also causes the physical line to output 'high' creating trouble
for endpoint devices during host reboot.
When host reboot happens, the ep_gpio will initially output 'low' due to
the GPIO getting reset to its POR value. Then during host controller probe,
it will output 'high' due to GPIOD_OUT_HIGH flag. Then during
rockchip_pcie_host_init_port(), it will first output 'low' and then 'high'
indicating the completion of controller initialization.
On the endpoint side, each output 'low' of ep_gpio is accounted for PERST#
assert and 'high' for PERST# deassert. With the above mentioned flow during
host reboot, endpoint will witness below state changes for PERST#:
(1) PERST# assert - GPIO POR state
(2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO
(3) PERST# assert - rockchip_pcie_host_init_port()
(4) PERST# deassert - rockchip_pcie_host_init_port()
Now the time interval between (2) and (3) is very short as both happen
during the driver probe(), and this results in a race in the endpoint.
Because, before completing the PERST# deassertion in (2), endpoint got
another PERST# assert in (3).
A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2)
to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with
a state corresponding to its 'initial/default' value and let the driver
change the state of the GPIO when required.
As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it
corresponds to the POR value of '0' (PERST# assert in the endpoint). Then
the driver can change the state of the ep_gpio later in
rockchip_pcie_host_init_port() as per the initialization sequence.
This fixes the firmware crash issue in Qcom based modems connected to
Rockpro64 based board.
Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support")
Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/
Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org
Reported-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org # v4.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fea93a3e5d5e6a09eb153866d2ce60ea3287a70d upstream.
The intent of the code snippet is to always return 0 for both
PCI_INTERRUPT_LINE and PCI_INTERRUPT_PIN.
The check misses PCI_INTERRUPT_PIN. This patch fixes that.
This is discovered by this call in VFIO:
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
The old code does not set *val to 0 because it misses the check for
PCI_INTERRUPT_PIN. Garbage is returned in that case.
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Link: https://lore.kernel.org/linux-pci/20240701202606.129606-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14cba6ace79627a57fb9058582b03f0ed3832390 upstream.
amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_rng_mod_init() is
a module_init() function that should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce068e83976140badb19c7f1307926b4b562fac4 upstream.
ich7_lpc_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The error handling code assumes incorrectly it's a normal errno
and checks for < 0. The return code is returned from the probe function
as is but probe functions should return normal errnos.
Remove < 0 from the check and convert PCIBIOS_* returns code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: a328e95b82c1 ("leds: LED driver for Intel NAS SS4200 series (v5)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240527132700.14260-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a17b9f590f6ec2b9f1b12b1db3bf1d181de6b272 upstream.
When changing the interface type we also need to update the bss_num, the
driver private data is searched based on a unique (bss_type, bss_num)
tuple, therefore every time bss_type changes, bss_num must also change.
This fixes for example an issue in which, after the mode changed, a
wireless scan on the changed interface would not finish, leading to
repeated -EBUSY messages to userspace when other scan requests were
sent.
Fixes: c606008b7062 ("mwifiex: Properly initialize private structure on interface type changes")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ab68e168ae1695f7c04fae98930740aaf7c50fa upstream.
[why & how]
Need to make sure plane_state is initialized
before accessing its members.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 295d91cbc700651782a60572f83c24861607b648)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 348744f27a35e087acc9378bf53537fbfb072775 upstream.
Bios version was popluated for FDMI response. Systems with EFI would show
optrom version as 0. EFI version is populated here and BIOS version is
already displayed under FDMI_HBA_BOOT_BIOS_NAME.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2df7aac81070987b0f052985856aa325a38debf6 upstream.
In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: 89c78134cc54 ("gma500: Add Poulsbo support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709092011.3204970-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb520c3f366c77e8d69e4e2e2781a8ce48d98e79 upstream.
In cdv_intel_lvds_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: 6a227d5fd6c4 ("gma500: Add support for Cedarview")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709113311.37168-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0157b5aa34eb43ec4c5510f9c260bbb03be937e upstream.
There appears to be a possible use after free with vdec_close().
The firmware will add buffer release work to the work queue through
HFI callbacks as a normal part of decoding. Randomly closing the
decoder device from userspace during normal decoding can incur
a read after free for inst.
Fix it by cancelling the work in vdec_close.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d8e2971e817bb64225fc0b6327a78752f58a9aa upstream.
In tpm_bios_measurements_open(), get_device() is called on the device
embedded in struct tpm_chip. In the error path, however, put_device() is
not called. This results in a reference count leak, which prevents the
device from being properly released. This commit makes sure to call
put_device() when the seq_open() call fails.
Cc: stable@vger.kernel.org # +v4.18
Fixes: 9b01b5356629 ("tpm: Move shared eventlog functions to common.c")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97d9fba9a812cada5484667a46e14a4c976ca330 upstream.
Currently, netconsole cleans up the netpoll structure before disabling
the target. This approach can lead to race conditions, as message
senders (write_ext_msg() and write_msg()) check if the target is
enabled before using netpoll. The sender can validate that the target is
enabled, but, the netpoll might be de-allocated already, causing
undesired behaviours.
This patch reverses the order of operations:
1. Disable the target
2. Clean up the netpoll structure
This change eliminates the potential race condition, ensuring that
no messages are sent through a partially cleaned-up netpoll structure.
Fixes: 2382b15bcc39 ("netconsole: take care of NETDEV_UNREGISTER event")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240712143415.1141039-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 463927a8902a9f22c3633960119410f57d4c8920 ]
`rtc_add_offset()` is called by `__rtc_read_time()`
and `__rtc_read_alarm()` to add the RTC's offset to
the raw read-outs from the device drivers. However,
in the latter case, a fix-up algorithm is run if
the RTC device does not report a full `struct rtc_time`
alarm value. In that case, the offset was forgot to be
added.
Fixes: fd6792bb022e ("rtc: fix alarm read and set offset")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240619140451.2800578-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f500f2011c0bbb6e1cacab74b4c99222e60248e ]
of_get_next_child() will increase refcount of the returned node, need
use of_node_put() on it when done.
Per current implementation, 'child' will be override by
for_each_child_of_node(np, child), so use of_get_child_count to avoid
refcount leakage.
Fixes: 17723111e64f ("pinctrl: add pinctrl-mxs support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-18-26c5f2dc1181@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b401f4a7170125365160c9af267a41ff6b39001 ]
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And add missing of_node_put() in the error path.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-4-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b3f108502bc45e6ebd005702add46759f3f45a ]
ti_iodelay_remove() is only called after ti_iodelay_probe() completed
successfully. In this case platform_set_drvdata() was called with a
non-NULL argument and so platform_get_drvdata() won't return NULL.
Simplify by removing the if block with the always false condition.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 9b401f4a7170 ("pinctrl: ti: ti-iodelay: fix possible memory leak when pinctrl_enable() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f773bfbdd428819328a2d185976cfc6ae811cd3 ]
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And call pcs_free_resources() if pinctrl_enable() fails.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-3-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae1cf4759972c5fe665ee4c5e0c29de66fe3cf4a ]
In devm_pinctrl_register(), if pinctrl_enable() fails in pinctrl_register(),
the "pctldev" has not been added to dev resources, so devm_pinctrl_dev_release()
can not be called, it leads memory leak.
Introduce pinctrl_uninit_controller(), call it in the error path to free memory.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-2-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5118072e228e7e4385fc5ac46b2e31cf6c4f2d3 ]
Broadcom switches supported by the b53 driver use a chip-wide jumbo frame
configuration. In the commit referenced with the Fixes tag, the setting
is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient chip-wide maximum frame size for the CPU port.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports. This aligns the driver
to the behavior of other switch drivers.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66b6095c264e1b4e0a441c6329861806504e06c6 ]
Marvell chips not supporting per-port jumbo frame size configurations use
a chip-wide frame size configuration. In the commit referenced with the
Fixes tag, the setting is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient maximum frame size for the CPU port. Specifically, sending
full-size frames from the CPU port on a MV88E6097 having a user port MTU
of 1500 bytes results in dropped frames.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports.
Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95b087f87b780daafad1dbb2c84e81b729d5d33f ]
When map a device between servers with MLX and BCM RoCE nics, RTRS
server complain about unknown imm type, and can't map the device,
After more debug, it seems bnxt_re wrongly handle the
imm_data, this patch fixed the compat issue with MLX for us.
In off list discussion, Selvin confirmed HW is working in little endian format
and all data needs to be converted to LE while providing.
This patch fix the endianness for imm_data
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd748e177194ebcbbaf98df75152a30e08230cc6 ]
The of_device_unregister call in therm_windtunnel's module_exit procedure
does not fully reverse the effects of of_platform_device_create in the
module_init prodedure. Once you unload this module, it is impossible
to load it ever again since only the first of_platform_device_create
call on the fan node succeeds.
This driver predates first git commit, and it turns out back then
of_platform_device_create worked differently than it does today.
So this is actually an old regression.
The appropriate function to undo of_platform_device_create now appears
to be of_platform_device_destroy, and switching to use this makes it
possible to unload and load the module as expected.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: c6e126de43e7 ("of: Keep track of populated platform devices")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240711035428.16696-1-nbowler@draconx.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f82c1e04721e7cd98e604eb4e58f0724d8e5a65 ]
Make sure interrupts are not left disabled when we fail to suspend the
touch controller.
Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad")
Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 917918f57a7b139c043e78c502876f2c286f4f0a ]
There is no need to allocate port data if port provided is not valid.
Fixes: c2261dd76b54 ("RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev")
Link: https://lore.kernel.org/r/022047a8b16988fc88d4426da50bf60a4833311b.1719235449.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5cf054d325e6f362e82fe6d124a1871a4af8174 ]
This file gets linked into nine different modules, which causes a warning:
scripts/Makefile.build:236: drivers/mtd/tests/Makefile: mtd_test.o is added to multiple modules: mtd_nandbiterrs mtd_oobtest mtd_pagetest mtd_readtest mtd_speedtest mtd_stresstest mtd_subpagetest mtd_torturetest
Make it a separate module instead.
Fixes: a995c792280d ("mtd: tests: rename sources in order to link a helper object")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240529095049.1915393-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4adcaf969d77d3d3aa3871bbadc196258a38aec6 ]
BTH_ACK_MASK bit is used to indicate that an acknowledge
(for this packet) should be scheduled by the responder.
Both UC and UD QPs are unacknowledged, so don't set
BTH_ACK_MASK for UC or UD QPs.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240624020348.494338-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5953e0647cec703ef436ead37fed48943507b433 ]
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d2e6992fc956e3308cd5376c18567def4cb3967 ]
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Fixes: fc06573dfaf8 ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context")
Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 866a5c7e2781cf1b019072288f1f5c64186dcb63 ]
If the device is missing, we get the following error:
qt1050 3-0041: ID -1340767592 not supported
Let's handle this situation and print more informative error
when reading of CHIP_ID fails:
qt1050 3-0041: Failed to read chip ID: -6
Fixes: cbebf5addec1 ("Input: qt1050 - add Microchip AT42QT1050 support")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240617183018.916234-1-andrey.lalaev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fcb9cb2fe47294e16067c3cfd25332c8662a115 ]
of_graph_get_next_endpoint() releases the reference to the previous
endpoint on each iteration, but when parsing fails the loop exits
early meaning the last reference is never dropped.
Fix it by dropping the refcount in the exit condition.
Fixes: d375b356e687 ("coresight: Fix support for sparsely populated ports")
Signed-off-by: James Clark <james.clark@arm.com>
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240529133626.90080-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903534fa7d30214d8ba840ab1cd9e917e0c88e41 ]
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB
iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB
iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB
iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB
Solve the double counting by moving old_size check later in
calculate_memsize() so that children_add_size is already accounted for.
After the patch, the bridge window retains its size as expected:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
Fixes: a4ac9fea016f ("PCI : Calculate right add_size")
Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40176714c818b0b6a2ca8213cdb7654fbd49b742 ]
Commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
The memory allocation used to occur in two steps:
tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
And it turned that into the following allocation:
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1]
Fixes: 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Fixes: commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750a4b1224142bd8dd057b0d5adf8a5608b7e77 ]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d4c ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 940b27161afc6ec53fc66245a4fb3518394cdc92 ]
This reverts commit da1afe8e6099980fe1e2fd7436dca284af9d3f29.
Commit 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()"), introduced in
5.5, added of_led_get() and led_put() but missed a put_device() in
led_put(), thus creating a leak in case the consumer device is removed.
Arguably device removal was not very popular, so this went apparently
unnoticed until 2022. In January 2023 two different patches got merged to
fix the same bug:
- commit da1afe8e6099 ("leds: led-core: Fix refcount leak in of_led_get()")
- commit 445110941eb9 ("leds: led-class: Add missing put_device() to led_put()")
They fix the bug in two different ways, which creates no patch conflicts,
and both were merged in v6.2. The result is that now there is one more
put_device() than get_device()s, instead of one less.
Arguably device removal is not very popular yet, so this apparently hasn't
been noticed as well up to now. But it blew up here while I'm working with
device tree overlay insertion and removal. The symptom is an apparently
unrelated list of oopses on device removal, with reasons:
kernfs: can not remove 'uevent', no directory
kernfs: can not remove 'brightness', no directory
kernfs: can not remove 'max_brightness', no directory
...
Here sysfs fails removing attribute files, which is because the device name
changed and so the sysfs path. This is because the device name string got
corrupted, which is because it got freed too early and its memory reused.
Different symptoms could appear in different use cases.
Fix by removing one of the two fixes.
The choice was to remove commit da1afe8e6099 because:
* it is calling put_device() inside of_led_get() just after getting the
device, thus it is basically not refcounting the LED device at all
during its entire lifetime
* it does not add a corresponding put_device() in led_get(), so it fixes
only the OF case
The other fix (445110941eb9) is adding the put_device() in led_put() so it
covers the entire lifetime, and it works even in the non-DT case.
Fixes: da1afe8e6099 ("leds: led-core: Fix refcount leak in of_led_get()")
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240625-led-class-device-leak-v2-1-75fdccf47421@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bd09a2db0f617377027a2bb0b9179e6959edff3 ]
Add check for the return value of drm_cvt_mode() and return the error if
it fails in order to avoid NULL pointer dereference.
Fixes: 1b043677d4be ("drm/qxl: add qxl_add_mode helper function")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58979ad6330a70450ed78837be3095107d022ea9 ]
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0dc9adf9474ecb7106e60e5472577375aedaed3 ]
Triggers which have trigger specific sysfs attributes typically store
related data in trigger-data allocated by the activate() callback and
freed by the deactivate() callback.
Calling device_remove_groups() after calling deactivate() leaves a window
where the sysfs attributes show/store functions could be called after
deactivation and then operate on the just freed trigger-data.
Move the device_remove_groups() call to before deactivate() to close
this race window.
This also makes the deactivation path properly do things in reverse order
of the activation path which calls the activate() callback before calling
device_add_groups().
Fixes: a7e7a3156300 ("leds: triggers: add device attribute support")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240504162533.76780-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a213bc09b1025c771ee722ee341af1d84375db8a ]
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e8585182 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57edbbcf5258c378a9b9d0c80d33b03a010b22c8 ]
The histogram support mixes _irqsave and _irq, causing the following
smatch warning:
drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming()
warn: mixing irqsave and irq
The histo_stop_streaming() calls spin_lock_irqsave() followed by
wait_event_lock_irq(). The former hints that interrupts may be disabled
by the caller, while the latter reenables interrupts unconditionally.
This doesn't cause any real bug, as the function is always called with
interrupts enabled, but the pattern is still incorrect.
Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave()
in histo_stop_streaming(). While at it, switch to spin_lock_irq() and
spin_lock() as appropriate elsewhere.
Fixes: 99362e32332b ("[media] v4l: vsp1: Add histogram support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86419686e66da5b90a07fb8a40ab138fe97189b5 ]
When the UVC device has a control that is readonly it doesn't set the
SET_CUR flag. For example the privacy control has SET_CUR flag set in
the defaults in the `uvc_ctrls` variable. Even if the device does not
have it set, it's not cleared by uvc_ctrl_get_flags().
Originally written with assignment in commit 859086ae3636 ("media:
uvcvideo: Apply flags from device to actual properties"). But changed to
|= in commit 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable
flags"). It would not clear the default flags.
With this patch applied the correct flags are reported to user space.
Tested with:
```
> v4l2-ctl --list-ctrls | grep privacy
privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only
```
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Fixes: 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags")
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240602065053.36850-1-dhs@frame.work
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65900c581d014499f0f8ceabfc02c652e9a88771 ]
Allows controls to get their properties and current value
from an entity-defined function instead of via a query to the USB
device.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 86419686e66d ("media: uvcvideo: Override default flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d8683b3fd93f0e378f24dc3d9604e5d7d3e0a17 ]
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24147897507cd3a7d63745d1518a638bf4132238 ]
Lets fix a race between mutex_is_lock() and mutex_lock().
<-mutex is not locked
if (!mutex_is_locked(&ictx->lock)) {
unlock = true; <- mutex is locked externaly
mutex_lock(&ictx->lock);
}
Let's use mutex_trylock() that does mutex_is_lock() and mutex_lock()
atomically.
Fix the following cocci warning:
drivers/media/rc/imon.c:1167:1-7: preceding lock on line 1153
Fixes: 23ef710e1a6c ("[media] imon: add conditional locking in change_protocol")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c ]
Infinite log printing occurs during fuzz test:
rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ...
...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ...
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
...
dvb-usb: bulk message failed: -22 (1/0)
Looking into the codes, there is a loop in dvb_usb_read_remote_control(),
that is in rc_core_dvb_usb_remote_init() create a work that will call
dvb_usb_read_remote_control(), and this work will reschedule itself at
'rc_interval' intervals to recursively call dvb_usb_read_remote_control(),
see following code snippet:
rc_core_dvb_usb_remote_init() {
...
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
...
}
dvb_usb_read_remote_control() {
...
err = d->props.rc.core.rc_query(d);
if (err)
err(...) // Did not return even if query failed
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
}
When the infinite log printing occurs, the query callback
'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to
the failure of finding a valid 'generic_bulk_ctrl_endpoint'
in usb_bulk_msg(), see following code snippet:
cxusb_rc_query() {
cxusb_ctrl_msg() {
dvb_usb_generic_rw() {
ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint),...);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
...
}
...
}
By analyzing the corresponding USB descriptor, it shows that the
bNumEndpoints is 0 in its interface descriptor, but
the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure
a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this
'invalid' USB device should be rejected before it calls into
dvb_usb_read_remote_control().
To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'.
And as Sean suggested, the same check and clear halts should be done for
'generic_bulk_ctrl_endpoint_response'. So introduce
dvb_usb_check_bulk_endpoint() to do it for both of them.
Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6320b9199dd99622668649c234d4e8a99e44a9c8 ]
The mipi_dsi_dcs_nop() function returns an error but we weren't
checking it in boe_panel_prepare(). Add a check. This is highly
unlikely to matter in practice. If the NOP failed then likely later
MIPI commands would fail too.
Found by code inspection.
Fixes: 812562b8d881 ("drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
