commit 5b590160d2cf776b304eb054afafea2bd55e3620 upstream.
If the trace data buffer becomes full, a truncated flag [T] is reported
in PERF_RECORD_AUX. In some cases, the size reported is 0, even though
data must have been added to make the buffer full.
That happens when the buffer fills up from empty to full before the
Intel PT driver has updated the buffer position. Then the driver
calculates the new buffer position before calculating the data size.
If the old and new positions are the same, the data size is reported
as 0, even though it is really the whole buffer size.
Fix by detecting when the buffer position is wrapped, and adjust the
data size calculation accordingly.
Example
Use a very small buffer size (8K) and observe the size of truncated [T]
data. Before the fix, it is possible to see records of 0 size.
Before:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
5 19462712368111 0x19710 [0x40]: PERF_RECORD_AUX offset: 0 size: 0 flags: 0x1 [T]
5 19462712700046 0x19ba8 [0x40]: PERF_RECORD_AUX offset: 0x170 size: 0xe90 flags: 0x1 [T]
After:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.040 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
1 113720802995 0x4948 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x2000 flags: 0x1 [T]
1 113720979812 0x6b10 [0x40]: PERF_RECORD_AUX offset: 0x2000 size: 0x2000 flags: 0x1 [T]
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241022155920.17511-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1157733344651ca505e259d6554591ff156922fa upstream.
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9fd7 ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f9d96136cba8fedd647d2c024342ce090133c2 upstream.
Commit 7c55b78818cf ("jfs: xattr: fix buffer overflow for invalid xattr")
also addresses this issue but it only fixes it for positive values, while
ea_size is an integer type and can take negative values, e.g. in case of
a corrupted filesystem. This still breaks validation and would overflow
because of implicit conversion from int to size_t in print_hex_dump().
Fix this issue by clamping the ea_size value instead.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a622e4d477bb12ad5ed4abbc7ad1365de1fa347 upstream.
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902cc179c931a033cd7f4242353aa2733bf8524c upstream.
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b909df18ce2a998afef81d58bbd1a05dc0788c40 upstream.
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 128fdbf36cddc2a901c4889ba1c89fa9f2643f2c upstream.
In success case, the revision holds a non-null pointer. The current
logic incorrectly returns an error for a non-null pointer, whereas
it should return an error for a null pointer.
The socinfo driver for IPQ9574 and IPQ5332 is currently broken,
resulting in the following error message
qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with
error -12
Add a null check for the revision to ensure it returns an error only in
failure case (null pointer).
Fixes: e694d2b5c58b ("soc: qcom: Add check devm_kasprintf() returned value")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40c974826734836402abfd44efbf04f63a2cc1c1 upstream.
If the clock sehci->clk was not enabled in spear_ehci_hcd_drv_probe,
it should not be disabled in any path.
Conversely, if it was enabled in spear_ehci_hcd_drv_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 7675d6ba436f ("USB: EHCI: make ehci-spear a separate driver")
Cc: stable@vger.kernel.org
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241114230310.432213-1-mordan@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afc545da381ba0c651b2658966ac737032676f01 upstream.
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993d0 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d38be702452137fa82a56ff7cc577d829add1637 ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The type parameter could be used to set the UART type, but is
better left unspecified (type unknown) when it isn't used.
Note that some applications have historically expected TIOCGSERIAL to be
implemented, but judging from the Debian sources, the port type not
being PORT_UNKNOWN is only used to check for the existence of legacy
serial ports (ttySn). Notably USB serial drivers like ftdi_sio have been
using PORT_UNKNOWN for twenty years without any problems.
Drop the bogus values provided by the greybus implementation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-8-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: fe0ebeafc3b7 ("staging: greybus: uart: Fix atomicity violation in get_serial_info()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ]
The pm_runtime_disable() is missing in probe error path,
so add it to fix it.
Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73dc7b182be4238b75278bfae16afb4c5564a58 ]
[Syzbot reported two possible deadlocks]
The first possible deadlock is:
WARNING: possible recursive locking detected
6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted
--------------------------------------------
syz-executor363/2651 is trying to acquire lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x15d/0x2c0 drivers/usb/misc/chaoskey.c:322
but task is already holding lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x7f/0x2c0 drivers/usb/misc/chaoskey.c:299
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(chaoskey_list_lock);
lock(chaoskey_list_lock);
*** DEADLOCK ***
The second possible deadlock is:
WARNING: possible circular locking dependency detected
6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted
------------------------------------------------------
kworker/0:2/804 is trying to acquire lock:
ffffffff899dadb0 (minor_rwsem){++++}-{3:3}, at: usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186
but task is already holding lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_disconnect+0xa8/0x2a0 drivers/usb/misc/chaoskey.c:235
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (chaoskey_list_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752
chaoskey_open+0xdd/0x220 drivers/usb/misc/chaoskey.c:274
usb_open+0x186/0x220 drivers/usb/core/file.c:47
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x6cb/0x1390 fs/open.c:958
vfs_open+0x82/0x3f0 fs/open.c:1088
do_open fs/namei.c:3774 [inline]
path_openat+0x1e6a/0x2d60 fs/namei.c:3933
do_filp_open+0x1dc/0x430 fs/namei.c:3960
do_sys_openat2+0x17a/0x1e0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (minor_rwsem){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain kernel/locking/lockdep.c:3904 [inline]
__lock_acquire+0x250b/0x3ce0 kernel/locking/lockdep.c:5202
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825
down_write+0x93/0x200 kernel/locking/rwsem.c:1577
usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186
chaoskey_disconnect+0xb7/0x2a0 drivers/usb/misc/chaoskey.c:236
usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:569 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:561
__device_release_driver drivers/base/dd.c:1273 [inline]
device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1296
bus_remove_device+0x22f/0x420 drivers/base/bus.c:576
device_del+0x396/0x9f0 drivers/base/core.c:3864
usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1418
usb_disconnect+0x2e1/0x920 drivers/usb/core/hub.c:2304
hub_port_connect drivers/usb/core/hub.c:5361 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5661 [inline]
port_event drivers/usb/core/hub.c:5821 [inline]
hub_event+0x1bed/0x4f40 drivers/usb/core/hub.c:5903
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(chaoskey_list_lock);
lock(minor_rwsem);
lock(chaoskey_list_lock);
lock(minor_rwsem);
*** DEADLOCK ***
[Analysis]
The first is AA lock, it because wrong logic, it need a unlock.
The second is AB lock, it needs to rearrange the order of lock usage.
Fixes: 422dc0a4d12d ("USB: chaoskey: fail open after removal")
Reported-by: syzbot+685e14d04fe35692d3bc@syzkaller.appspotmail.com
Reported-by: syzbot+1f8ca5ee82576ec01f12@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=685e14d04fe35692d3bc
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Tested-by: syzbot+685e14d04fe35692d3bc@syzkaller.appspotmail.com
Reported-by: syzbot+5f1ce62e956b7b19610e@syzkaller.appspotmail.com
Tested-by: syzbot+5f1ce62e956b7b19610e@syzkaller.appspotmail.com
Tested-by: syzbot+1f8ca5ee82576ec01f12@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/tencent_84EB865C89862EC22EE94CB3A7C706C59206@qq.com
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 422dc0a4d12d0b80dd3aab3fe5943f665ba8f041 ]
chaoskey_open() takes the lock only to increase the
counter of openings. That means that the mutual exclusion
with chaoskey_disconnect() cannot prevent an increase
of the counter and chaoskey_open() returning a success.
If that race is hit, chaoskey_disconnect() will happily
free all resources associated with the device after
it has dropped the lock, as it has read the counter
as zero.
To prevent this race chaoskey_open() has to check
the presence of the device under the lock.
However, the current per device lock cannot be used,
because it is a part of the data structure to be
freed. Hence an additional global mutex is needed.
The issue is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+422188bce66e76020e55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=422188bce66e76020e55
Fixes: 66e3e591891da ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Rule: add
Link: https://lore.kernel.org/stable/20241002132201.552578-1-oneukum%40suse.com
Link: https://lore.kernel.org/r/20241002132201.552578-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0aa9614ab0fd35b404e4b16ebe879f9fc152591 ]
The IO yurex_write() needs to wait for in order to have a device
ready for writing again can take a long time time.
Consequently the sleep is done in an interruptible state.
Therefore others waiting for yurex_write() itself to finish should
use mutex_lock_interruptible.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 6bc235a2e24a5 ("USB: add driver for Meywa-Denki & Kayac YUREX")
Rule: add
Link: https://lore.kernel.org/stable/20240924084415.300557-1-oneukum%40suse.com
Link: https://lore.kernel.org/r/20240924084415.300557-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44feafbaa66ec86232b123bb8437a6a262442025 ]
iowarrior_read() uses the iowarrior dev structure, but does not use any
lock on the structure. This can cause various bugs including data-races,
so it is more appropriate to use a mutex lock to safely protect the
iowarrior dev structure. When using a mutex lock, you should split the
branch to prevent blocking when the O_NONBLOCK flag is set.
In addition, it is unnecessary to check for NULL on the iowarrior dev
structure obtained by reading file->private_data. Therefore, it is
better to remove the check.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240919103403.3986-1-aha310510@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4b7064d34186cf4970fe0333c3b27346cf8f819 ]
If i2c_smbus_write_byte_data() fails in al3010_init(),
al3010_set_pwr(false) is not called.
In order to avoid such a situation, move the devm_add_action_or_reset()
witch calls al3010_set_pwr(false) right after a successful
al3010_set_pwr(true).
Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/ee5d10a2dd2b70f29772d5df33774d3974a80f30.1725993353.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9c273d6daaa9866f349bbe8cae25c67764c456 ]
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d90b ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b96ef16d2f837870daaea51c38cd50458b95ad5c ]
We can use standard rcu_read_lock(), to get rid
of last read_lock(&mrt_lock) call points.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fc9c273d6daa ("ipmr: fix tables suspicious RCU usage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5311598f7f3293683cdc761df71ae3469327332c ]
After successful PCIe AER recovery, FW will reset all resource
reservations. If it is IF_UP, the driver will call bnxt_open() and
all resources will be reserved again. It it is IF_DOWN, we should
call bnxt_reserve_rings() so that we can reserve resources including
RoCE resources to allow RoCE to resume after AER. Without this
patch, RoCE fails to resume in this IF_DOWN scenario.
Later, if it becomes IF_UP, bnxt_open() will see that resources have
been reserved and will not reserve again.
Fixes: fb1e6e562b37 ("bnxt_en: Fix AER recovery.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cfb5e7f0ded2bfaabc270ceb5f91d13f0e805b9 ]
Following sequence in hsr_init_sk() is invalid :
skb_reset_mac_header(skb);
skb_reset_mac_len(skb);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
It is invalid because skb_reset_mac_len() needs the correct
network header, which should be after the mac header.
This patch moves the skb_reset_network_header()
and skb_reset_transport_header() before
the call to dev_hard_header().
As a result skb->mac_len is no longer set to a value
close to 65535.
Fixes: 48b491a5cc74 ("net: hsr: fix mac_len checks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: George McCollister <george.mccollister@gmail.com>
Link: https://patch.msgid.link/20241122171343.897551-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f1c0ea133a6e4a193a7b285efe209664caeea43 ]
Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user
to turn UDP GRO on and off for forwarding.
Defaults to off to not change current datapath.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 9cfb5e7f0ded ("net: hsr: fix hsr_init_sk() vs network/transport headers.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ac40e6d0ccdd93031f8b1af61b0fe5cdd704923 ]
`atmel_qspi_reg_name()` is used for pretty-printing register offsets
for verbose logging of register accesses. However, due to a typo
(likely a copy-paste error), QSPI_RD's offset prints as "MR", the
name of the previous register. Fix this typo.
Fixes: c528ecfbef04 ("spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20241122141302.2599636-1-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 407618d66dba55e7db1278872e8be106808bbe91 ]
On DWMAC3 and later, there's a RX Watchdog interrupt that's used for
interrupt coalescing. It's known to be buggy on some platforms, and
dwmac-socfpga appears to be one of them. Changing the interrupt
coalescing from ethtool doesn't appear to have any effect here.
Without disabling RIWT (Received Interrupt Watchdog Timer, I
believe...), we observe latencies while receiving traffic that amount to
around ~0.4ms. This was discovered with NTP but can be easily reproduced
with a simple ping. Without this patch :
64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.657 ms
With this patch :
64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.254 ms
Fixes: 801d233b7302 ("net: stmmac: Add SOCFPGA glue driver")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241122141256.764578-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b032ae57d4fe2b2445e3bc190db6fcaa8c102f68 ]
If the clock pep->clk was not enabled in pxa168_eth_probe,
it should not be disabled in any path.
Conversely, if it was enabled in pxa168_eth_probe, it must be disabled
in all error paths to ensure proper cleanup.
Use the devm_clk_get_enabled helper function to ensure proper call balance
for pep->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: a49f37eed22b ("net: add Fast Ethernet driver for PXA168.")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241121200658.2203871-1-mordan@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e863ff806f72098bccaf8fa89c80d9ad6187c3b0 ]
Validate Wake-on-LAN (WoL) options in `lan78xx_set_wol` before calling
`usb_autopm_get_interface`. This prevents USB autopm refcounting issues
and ensures the adapter can properly enter autosuspend when invalid WoL
options are provided.
Fixes: eb9ad088f966 ("lan78xx: Check for supported Wake-on-LAN modes")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://patch.msgid.link/20241118140351.2398166-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae7370e61c5d8f5bcefc2d4fca724bd4e9bbf789 ]
Add calls to `phy_device_free` after `fixed_phy_unregister` to fix a
memory leak that occurs when the device is unplugged. This ensures
proper cleanup of pseudo fixed-link PHYs.
Fixes: 89b36fb5e532 ("lan78xx: Lan7801 Support for Fixed PHY")
Cc: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241116130558.1352230-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34f99d3b706a519e556841f405c224ca708b1f54 ]
Correct bq27426 registers, according to technical reference manual
it does not have Design Capacity register so it is not register
compatible with bq27421.
Fixes: 5ef6a16033b47 ("power: supply: bq27xxx: Add support for BQ27426")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241016-fix_bq27426-v2-1-aa6c0f51a9f6@mainlining.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ed510f06e12f8876c20474766cc2f101a41174f ]
Currently REG_NAC (nominal available capacity) is mapped to
power-supply's CHARGE_NOW property. Some chips do not have
REG_NAC and do not expose CHARGE_NOW at the moment. Some
bq27xxx chips also have another register REG_RM (remaining
capacity). The difference between REG_NAC and REG_RM is load
compensation.
This patch adds register information for REG_RM for all
supported fuel gauges. On systems having REG_NAC it is
ignored, so behaviour does not change. On systems without
REG_NAC, REG_RM will be used to provide CHARGE_NOW
functionality.
As a result there are three more chips exposing CHARGE_NOW:
bq27z561, bq28z610 and bq34z100
Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: 34f99d3b706a ("power: supply: bq27xxx: Fix registers of bq27426")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6da4553ff24a5d1c959c9627c965323adc3d307 ]
The put_device() call in power_supply_put() may call
power_supply_dev_release(). The latter function does not sleep so
power_supply_put() doesn't sleep either. Hence, remove the might_sleep()
call from power_supply_put(). This patch suppresses false positive
complaints about calling a sleeping function from atomic context if
power_supply_put() is called from atomic context.
Cc: Kyle Tso <kyletso@google.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 1a352462b537 ("power_supply: Add power_supply_put for decrementing device reference counter")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240917193914.47566-1-bvanassche@acm.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66f759832a83cb273ba5a55c66dcc99384efa74 ]
Add the missing 'name' parameter to the mount_api documentation for
fs_validate_description().
Fixes: 96cafb9ccb15 ("fs_parser: remove fs_parameter_description name field")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241125215021.231758-1-rdunlap@infradead.org
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4bf8d0b6716a423b16495d55b35d3fe515905d ]
There are cases where a PCIe extended capability should be hidden from
the user. For example, an unknown capability (i.e., capability with ID
greater than PCI_EXT_CAP_ID_MAX) or a capability that is intentionally
chosen to be hidden from the user.
Hiding a capability is done by virtualizing and modifying the 'Next
Capability Offset' field of the previous capability so it points to the
capability after the one that should be hidden.
The special case where the first capability in the list should be hidden
is handled differently because there is no previous capability that can
be modified. In this case, the capability ID and version are zeroed
while leaving the next pointer intact. This hides the capability and
leaves an anchor for the rest of the capability list.
However, today, hiding the first capability in the list is not done
properly if the capability is unknown, as struct
vfio_pci_core_device->pci_config_map is set to the capability ID during
initialization but the capability ID is not properly checked later when
used in vfio_config_do_rw(). This leads to the following warning [1] and
to an out-of-bounds access to ecap_perms array.
Fix it by checking cap_id in vfio_config_do_rw(), and if it is greater
than PCI_EXT_CAP_ID_MAX, use an alternative struct perm_bits for direct
read only access instead of the ecap_perms array.
Note that this is safe since the above is the only case where cap_id can
exceed PCI_EXT_CAP_ID_MAX (except for the special capabilities, which
are already checked before).
[1]
WARNING: CPU: 118 PID: 5329 at drivers/vfio/pci/vfio_pci_config.c:1900 vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
CPU: 118 UID: 0 PID: 5329 Comm: simx-qemu-syste Not tainted 6.12.0+ #1
(snip)
Call Trace:
<TASK>
? show_regs+0x69/0x80
? __warn+0x8d/0x140
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? report_bug+0x18f/0x1a0
? handle_bug+0x63/0xa0
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? vfio_pci_config_rw+0x244/0x430 [vfio_pci_core]
vfio_pci_rw+0x101/0x1b0 [vfio_pci_core]
vfio_pci_core_read+0x1d/0x30 [vfio_pci_core]
vfio_device_fops_read+0x27/0x40 [vfio]
vfs_read+0xbd/0x340
? vfio_device_fops_unl_ioctl+0xbb/0x740 [vfio]
? __rseq_handle_notify_resume+0xa4/0x4b0
__x64_sys_pread64+0x96/0xc0
x64_sys_call+0x1c3d/0x20d0
do_syscall_64+0x4d/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241124142739.21698-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35025963326e44d8bced3eecd42d2f040f4f0024 ]
The starting iova address to iterate iotlb map entry within a range
was set to an irrelevant value when passing to the itree_next()
iterator, although luckily it doesn't affect the outcome of finding
out the granule of the smallest iotlb map size. Fix the code to make
it consistent with the following for-loop.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62a8642ba00aa8ceb0a02ade942f5ec52e877c95 ]
nfsd4_shutdown_copy() is just this:
while ((copy = nfsd4_get_copy(clp)) != NULL)
nfsd4_stop_copy(copy);
nfsd4_get_copy() bumps @copy's reference count, preventing
nfsd4_stop_copy() from releasing @copy.
A while loop like this usually works by removing the first element
of the list, but neither nfsd4_get_copy() nor nfsd4_stop_copy()
alters the async_copies list.
Best I can tell, then, is that nfsd4_shutdown_copy() continues to
loop until other threads manage to remove all the items from this
list. The spinning loop blocks shutdown until these items are gone.
Possibly the reason we haven't seen this issue in the field is
because client_has_state() prevents __destroy_client() from calling
nfsd4_shutdown_copy() if there are any items on this list. In a
subsequent patch I plan to remove that restriction.
Fixes: e0639dc5805a ("NFSD introduce async copy feature")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e02c641c3a43c88cecc08402000418e15578d38 ]
@ses is initialized to NULL. If __nfsd4_find_backchannel() finds no
available backchannel session, setup_callback_client() will try to
dereference @ses and segfault.
Fixes: dcbeaa68dbbd ("nfsd4: allow backchannel recovery")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b22b7719fc17d5979a991c918c868ab041be5c8 ]
Any write access to the IMEM region when the Q6 is setting up XPU
protection on it will result in a XPU violation. Fix this by ensuring
IMEM writes related to the MBA post-mortem logs happen before the Q6
is brought out of reset.
Fixes: 318130cc9362 ("remoteproc: qcom_q6v5_mss: Add MBA log extraction support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240819073020.3291287-1-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06c59d97f63c1b8af521fa5aef8a716fb988b285 ]
The name len field of the CMD_OPEN packet is only 16-bits and the upper
16-bits of "param2" are a different "prio" field, which can be nonzero in
certain situations, and CMD_OPEN packets can be unexpectedly dropped
because of this.
Fix this by masking out the upper 16 bits of param2.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007235935.6216-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e816d0318fdfe8932da80dbf04ba318b13e4b3a ]
The upstream GLINK driver was first introduced to communicate with the
RPM on MSM8996, presumably as an artifact from that era the command
defines was prefixed RPM_CMD, while they actually are GLINK_CMDs.
Let's rename these, to keep things tidy. No functional change.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214225933.2025595-1-quic_bjorande@quicinc.com
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b16a37e1846c9573a847a56fa2f31ba833dae45a ]
The current design sleeps unconditionally in TX FIFO full case and
wakeup only after sleep timer expires which adds random delays in
clients TX path.
Avoid sleep and use READ_NOTIFY command so that writer can be woken up
when remote notifies about read completion by sending IRQ.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-7-git-send-email-deesin@codeaurora.org
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8956927faed366b60b0355f4a4317a10e281ced7 ]
With current design the transport can send packets of size upto
FIFO_SIZE which is 16k and return failure for all packets above 16k.
Add TX_DATA_CONT command to send packets greater than 16k by splitting
into 8K chunks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-4-git-send-email-deesin@codeaurora.org
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1302e352b26f34991b619b5d0b621b76d20a3883 ]
syscall__scnprintf_args may not place anything in the output buffer
(e.g., because the arguments are all zero). If that happened in
trace__fprintf_sys_enter, its fprintf would receive an unitialized
buffer leading to garbage output.
Fix the problem by passing the (possibly zero) bounds of the argument
buffer to the output fprintf.
Fixes: a98392bb1e169a04 ("perf trace: Use beautifiers on syscalls:sys_enter_ handlers")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-2-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fd7c36973a250e17a4ee305a31545a9426021f4 ]
If a perf trace event selector specifies a maximum number of events to output
(i.e., "/nr=N/" syntax), the event printing handler, trace__event_handler,
disables the event selector after the maximum number events are
printed.
Furthermore, trace__event_handler checked if the event selector was
disabled before doing any work. This avoided exceeding the maximum
number of events to print if more events were in the buffer before the
selector was disabled.
However, the event selector can be disabled for reasons other than
exceeding the maximum number of events. In particular, when the traced
subprocess exits, the main loop disables all event selectors. This meant
the last events of a traced subprocess might be lost to the printing
handler's short-circuiting logic.
This nondeterministic problem could be seen by running the following many times:
$ perf trace -e syscalls:sys_enter_exit_group true
trace__event_handler should simply check for exceeding the maximum number of
events to print rather than the state of the event selector.
Fixes: a9c5e6c1e9bff42c ("perf trace: Introduce per-event maximum number of events property")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-1-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63a24cf8cc330e5a68ebd2e20ae200096974c475 ]
When CONFIG_FEC is set (due to COMPILE_TEST) along with
CONFIG_M54xx, coldfire/device.c has compile errors due to
missing MCFEC_* and MCF_IRQ_FEC_* symbols.
Make the whole FEC blocks dependent on having the HW macros
defined, rather than on CONFIG_FEC itself.
This fix is very similar to commit e6e1e7b19fa1 ("m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined")
Fixes: b7ce7f0d0efc ("m68knommu: merge common ColdFire FEC platform setup code")
To: Greg Ungerer <gerg@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f212140962c93cd5da43283a18e31681540fc23d ]
Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO
register offset was incorrectly set to 8 instead of 0. This prevented
proper GPIO configuration for m5441x targets.
Fixes: bea8bcb12da0 ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb8e56542a3cf469fdf25d77f50e21cbff3ae7e ]
trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.
Fixes: f11b2803bb88 ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c8a8ec0a0e9a1176022a35c4daf04fe1594d270 ]
There is only single instance of these ops, so remove the indirection
and call allocate_segment_by_default directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 43563069e1c1 ("f2fs: check curseg->inited before write_sum_page in change_curseg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3af1f13476ec23fd99c98d060a89be28c1e8871 ]
This f2fs_bug_on was introduced by commit 2c1905042c8c ("f2fs: check
segment type in __f2fs_replace_block") when there were only 6 curseg types.
After commit d0b9e42ab615 ("f2fs: introduce inmem curseg") was introduced,
the condition should be changed to checking curseg->seg_type.
Fixes: d0b9e42ab615 ("f2fs: introduce inmem curseg")
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
