update_idle_core() is only done for the case of sched_smt_present.
but test_idle_cores() is done for all machines even those without
SMT.
This can contribute to up 8%+ hackbench performance loss on a
machine like kunpeng 920 which has no SMT. This patch removes the
redundant test_idle_cores() for !SMT machines.
Hackbench is ran with -g {2..14}, for each g it is ran 10 times to get
an average.
$ numactl -N 0 hackbench -p -T -l 20000 -g $1
The below is the result of hackbench w/ and w/o this patch:
g= 2 4 6 8 10 12 14
w/o: 1.8151 3.8499 5.5142 7.2491 9.0340 10.7345 12.0929
w/ : 1.8428 3.7436 5.4501 6.9522 8.2882 9.9535 11.3367
+4.1% +8.3% +7.3% +6.3%
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Change-Id: I0dd9363d2b8da9dda0bed205a5ddc36f75fabeef
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
(cherry picked from commit 7c201829c9c1e1ebb1384de66e02b8249d83167e)
Signed-off-by: TogoFire <togofire@mailfence.com>
Signed-off-by: onettboots <blackcocopet@gmail.com>
Replace a bunch of cpumask_any*() instances with
cpumask_any*_distribute(), by injecting this little bit of random in
cpu selection, we reduce the chance two competing balance operations
working off the same lowest_mask pick the same CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.190759694@infradead.org
Signed-off-by: John Vincent <git@tenseventyseven.cf>
I have a RT task X at a high priority and cyclictest on each CPU with
lower priority than X's. If X is active and each CPU wakes their own
cylictest thread then it ends in a longer rto_push storm.
A random CPU determines via balance_rt() that the CPU on which X is
running needs to push tasks. X has the highest priority, cyclictest is
next in line so there is nothing that can be done since the task with
the higher priority is not touched.
tell_cpu_to_push() increments rto_loop_next and schedules
rto_push_irq_work_func() on X's CPU. The other CPUs also increment the
loop counter and do the same. Once rto_push_irq_work_func() is active it
does nothing because it has _no_ pushable tasks on its runqueue. Then
checks rto_next_cpu() and decides to queue irq_work on the local CPU
because another CPU requested a push by incrementing the counter.
I have traces where ~30 CPUs request this ~3 times each before it
finally ends. This greatly increases X's runtime while X isn't making
much progress.
Teach rto_next_cpu() to only return CPUs which also have tasks on their
runqueue which can be pushed away. This does not reduce the
tell_cpu_to_push() invocations (rto_loop_next counter increments) but
reduces the amount of issued rto_push_irq_work_func() if nothing can be
done. As the result the overloaded CPU is blocked less often.
There are still cases where the "same job" is repeated several times
(for instance the current CPU needs to resched but didn't yet because
the irq-work is repeated a few times and so the old task remains on the
CPU) but the majority of request end in tell_cpu_to_push() before an IPI
is issued.
Reviewed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230801152648._y603AS_@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Poorly made kernel trees often use trace_printk() without
properly guarding them in a #ifdef macro.
Such usage of trace_printk() causes a warning at
boot and additional memory allocation.
This option serves to disable those all at once with ease.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Alex Naidis <alex.naidis@linux.com>
(cherry picked from commit 9ec68f89188e461721de418545e31f37800dfa02)
(cherry picked from commit 8fb7e59ccd6cda94e29af9e6e38a96eda458c9da)
(cherry picked from commit 515ff4ab9e2428b642fcd158af94c83e3059b33b)
(cherry picked from commit ac9a6d9d6a744a11c49e9d756bd0229c912b773d)
(cherry picked from commit e4f4c2c3e696ab4135e5e63b2acae6400476ac35)
Signed-off-by: SirRGB <sirrgb@proton.me>
Giving userspace intimate control over CPU latency requirements is
nonsense. Userspace can't even stop itself from being preempted, so
there's no reason for it to have access to a mechanism primarily used to
eliminate CPU delays on the order of microseconds.
Remove userspace's ability to send pm_qos requests so that it can't hurt
power consumption.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
A bunch of kernels for desktop Linux have been reducing this value to improve interactivity. From Zen[1] to CachyOS[2]. There have been attempts to reduce it on Android as well.
Experiment with reducing the CFS bandwidth slice to 4 msec, 1 less from the default. This is something I honestly don't want userspace to touch so keep it out from sysfs and modify it from the kernel directly instead. I honestly think that the 'interactivity' benefits (if it does hold water) of this change should be reflected on all performance modes on FreshROMs.
Test for performance and battery life.
[1]: https://github.com/zen-kernel/zen-kernel/commit/7de2596b35ac1db
[2]: https://github.com/CachyOS/linux/blob/base-5.18/kernel/sched/fair.c
Signed-off-by: John Vincent <git@tenseventyseven.cf>
If the scenario is right, we can run realtime tasks for 5% longer. This
also disables lockup protection from unhandled realtime tasks.
Signed-off-by: Tyler Nijmeh <tylernij@gmail.com>
Signed-off-by: ZyCromerZ <neetroid97@gmail.com>
CPUs that are idle are excellent candidates for latency sensitive or
high-performance tasks. Decrementing their capacity while they are idle
will result in these CPUs being chosen less, and they will prefer to
schedule smaller tasks instead of large ones. Disable this.
Signed-off-by: Tyler Nijmeh <tylernij@gmail.com>
Signed-off-by: clarencelol <clarencekuiek@icloud.com>
Signed-off-by: Tashfin Shakeer Rhythm <tashfinshakeerrhythm@gmail.com>
commit a360f311f57a36e96d88fa8086b749159714dcd2 upstream.
This was attempted by using the dev_name in the slab cache name, but as
Omar Sandoval pointed out, that can be an arbitrary string, eg something
like "/dev/root". Which in turn trips verify_dirent_name(), which fails
if a filename contains a slash.
So just make it use a sequence counter, and make it an atomic_t to avoid
any possible races or locking issues.
Reported-and-tested-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/all/ZxafcO8KWMlXaeWE@telecaster.dhcp.thefacebook.com/
Fixes: 79efebae4afc ("9p: Avoid creating multiple slab caches with the same name")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73254a297c2dd094abec7c9efee32455ae875bdf upstream.
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock.
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604130527.3597-1-hagarhem@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59f8f0b54c8ffb4521f6bbd1cb6f4dfa5022e75e upstream.
'need_recover' and 'mrdev' are equivalent in raid10_sync_request(), and
inc mrdev->nr_pending is unreasonable if don't need recovery. Replace
'need_recover' with 'mrdev', and only inc nr_pending when needed.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527072218.2365857-3-linan666@huaweicloud.com
Cc: Hagar Gamal Halim <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15f34347481648a567db67fb473c23befb796af5 ]
ocfs2_setattr() uses attr->ia_mode, attr->ia_uid and attr->ia_gid in
a trace point even though ATTR_MODE, ATTR_UID and ATTR_GID aren't set.
Initialize all fields of newattrs to avoid uninitialized variables, by
checking if ATTR_MODE, ATTR_UID, ATTR_GID are initialized, otherwise 0.
Reported-by: syzbot+6c55f725d1bdc8c52058@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6c55f725d1bdc8c52058
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://lore.kernel.org/r/20241017120553.55331-1-alessandro.zanni87@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f8825b2a78ac392d3fbb3a2e65e56d9e39d75e9 ]
ifcvf_init_hw() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
Convert the error check to plain non-zero check.
Fixes: 5a2414bc454e ("virtio: Intel IFC VF driver for VDPA")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20241017013812.129952-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf8989d20d64ad702a6210c11a0347ebf3852aa7 ]
In opal_event_init() if request_irq() fails name is not freed, leading
to a memory leak. The code only runs at boot time, there's no way for a
user to trigger it, so there's no security impact.
Fix the leak by freeing name in the error path.
Reported-by: 2639161967 <2639161967@qq.com>
Closes: https://lore.kernel.org/linuxppc-dev/87wmjp3wig.fsf@mail.lhotse
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240920093520.67997-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6639f143a0b42d7fb110ad14f5949f7c218890 ]
When building for the UM arch and neither INDIRECT_IOMEM=y, nor
HAS_IOMEM=y is selected, it will fall back to the implementations from
asm-generic/io.h for IO memcpy. But these fall-back functions just do a
memcpy. So, instead of depending on UML, add dependency on 'HAS_IOMEM ||
INDIRECT_IOMEM'.
Reviewed-by: Yann Sionneau <ysionneau@kalrayinc.com>
Signed-off-by: Julian Vetter <jvetter@kalrayinc.com>
Link: https://patch.msgid.link/20241010124601.700528-1-jvetter@kalrayinc.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e845d2399a00f866f287e0cefbd4fc7d8ef0d2f7 ]
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 434247637c66e1be2bc71a9987d4c3f0d8672387 ]
The kzmalloc call in bpf_check can fail when memory is very fragmented,
which in turn can lead to an OOM kill.
Use kvzmalloc to fall back to vmalloc when memory is too fragmented to
allocate an order 3 sized bpf verifier environment.
Admittedly this is not a very common case, and only happens on systems
where memory has already been squeezed close to the limit, but this does
not seem like much of a hot path, and it's a simple enough fix.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241008170735.16766766@imladris.surriel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a5ab8071114344f62a8b1e64ed3452a77257d76 ]
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79efebae4afc2221fa814c3cae001bede66ab259 ]
In the spirit of [1], avoid creating multiple slab caches with the same
name. Instead, add the dev_name into the mix.
[1]: https://lore.kernel.org/all/20240807090746.2146479-1-pedro.falcato@gmail.com/
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reported-by: syzbot+3c5d43e97993e1fa612b@syzkaller.appspotmail.com
Message-ID: <20240807094725.2193423-1-pedro.falcato@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73f476aa1975bae6a792b340f5b26ffcfba869a6 upstream.
The previous implementation of .handle_interrupt() did not take into
account the fact that all the interrupt status registers should be
acknowledged since multiple interrupt sources could be asserted.
Fix this by reading all the status registers before exiting with
IRQ_NONE or triggering the PHY state machine.
Fixes: 1d1ae3c6ca3f ("net: phy: ti: implement generic .handle_interrupt() callback")
Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210226153020.867852-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ca575374dd9a507cdd16dfa0e78c2e9e20bd05f upstream.
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL.
Cc: stable <stable@kernel.org>
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Wongi Lee <qwerty@theori.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <2024102245-strive-crib-c8d3@gregkh>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e629295bd60abf4da1db85b82819ca6a4f6c1e79 upstream.
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4413665dd6c528b31284119e3571c25f371e1c36 ]
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b8ea38fabab45ad911a32a336416062553dfe9c ]
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 4413665dd6c5 ("ALSA: usb-audio: Add quirks for Dell WD19 dock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 464cb98f1c07298c4c10e714ae0c36338d18d316 upstream.
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37bb5628379295c1254c113a407cab03a0f4d0b4 upstream.
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue.
Fixes: 984f68683298 ("USB: serial: io_edgeport.c: remove dbg() usage")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dd08a0b4193087976db6b3ee7807de7e8316f96 upstream.
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 498dbd9aea205db9da674994b74c7bf8e18448bd upstream.
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit().
Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8ee299855f08539e04d6c1a6acb3dc9e5423c00 upstream.
When build with !CONFIG_MMU, the variable 'vmcore_mmap_ops'
is defined but not used:
>> fs/proc/vmcore.c:458:42: warning: unused variable 'vmcore_mmap_ops'
458 | static const struct vm_operations_struct vmcore_mmap_ops = {
Fix this by only defining it when CONFIG_MMU is enabled.
Link: https://lkml.kernel.org/r/20241101034803.9298-1-xiqi2@huawei.com
Fixes: 9cb218131de1 ("vmcore: introduce remap_oldmem_pfn_range()")
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202410301936.GcE8yUos-lkp@intel.com/
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecf2b43018da9579842c774b7f35dbe11b5c38dd upstream.
This can lead to out of bounds writes since frames of this type were not
taken into account when calculating the size of the frames buffer in
uvc_parse_streaming.
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Benoit Sevens <bsevens@google.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac888d58869bb99753e7652be19a151df9ecb35d upstream.
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Fixes: f88649721268 ("ipv4: fix dst race in sk_dst_get()")
Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ resolved conflict due to bc9d3a9f2afc ("net: dst: Switch to rcuref_t
reference counting") is not in the tree ]
Signed-off-by: Abdelkareem Abdelsaamad <kareemem@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf96b8e45a9bf74d2a6f1e1f88a41b10e9357c6b upstream.
ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.
Changes in v2:
- call evlist__delete from within perf_session__delete
v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/
ASan report follows:
$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks
<SNIP unrelated>
Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
#3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 568 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
#3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
#4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 264 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
#3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
#4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
#3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
#1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
#2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
#3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
#4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
#5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
#6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@vger.kernel.org # 5.10.228
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "perf hist: Add missing puts to hist__account_cycles"
This reverts commit a83fc293acd5c5050a4828eced4a71d2b2fffdd3.
On x86 platform, kernel v5.10.228, perf-report command aborts due to "free():
invalid pointer" when perf-record command is run with taken branch stack
sampling enabled. This regression can be reproduced with the following steps:
- sudo perf record -b
- sudo perf report
The root cause is that bi[i].to.ms.maps does not always point to thread->maps,
which is a buffer dynamically allocated by maps_new(). Instead, it may point to
&machine->kmaps, while kmaps is not a pointer but a variable. The original
upstream commit c1149037f65b ("perf hist: Add missing puts to
hist__account_cycles") worked well because machine->kmaps had been refactored to
a pointer by the previous commit 1a97cee604dc ("perf maps: Use a pointer for
kmaps").
To this end, just revert commit a83fc293acd5c5050a4828eced4a71d2b2fffdd3.
It is worth noting that the memory leak issue, which the reverted patch intended
to fix, has been solved by commit cf96b8e45a9b ("perf session: Add missing
evlist__delete when deleting a session"). The root cause is that the evlist is
not being deleted on exit in perf-report, perf-script, and perf-data.
Consequently, the reference count of the thread increased by thread__get() in
hist_entry__init() is not decremented in hist_entry__delete(). As a result,
thread->maps is not properly freed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org # 5.10.228
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6098475d4cb48d821bdf453c61118c56e26294f0 upstream.
Currently we have a global spi_add_lock which we take when adding new
devices so that we can check that we're not trying to reuse a chip
select that's already controlled. This means that if the SPI device is
itself a SPI controller and triggers the instantiation of further SPI
devices we trigger a deadlock as we try to register and instantiate
those devices while in the process of doing so for the parent controller
and hence already holding the global spi_add_lock. Since we only care
about concurrency within a single SPI bus move the lock to be per
controller, avoiding the deadlock.
This can be easily triggered in the case of spi-mux.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Hardik Gohil <hgohil@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
