When backport commit c79c5a0a00a9 to 5.10-stable, there is a mistake change.
The head page instead of tail page should be passed to try_to_unmap(),
otherwise unmap will failed as follows.
Memory failure: 0x121c10: failed to unmap page (mapcount=1)
Memory failure: 0x121c10: recovery action for unmapping failed page: Ignored
Fixes: 70168fdc743b ("mm/memory-failure: check the mapcount of the precise page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbf4ab821804df071c8b566d9813083125e6d97b upstream.
The SC16IS7XX IC supports a burst mode to access the FIFOs where the
initial register address is sent ($00), followed by all the FIFO data
without having to resend the register address each time. In this mode, the
IC doesn't increment the register address for each R/W byte.
The regmap_raw_read() and regmap_raw_write() are functions which can
perform IO over multiple registers. They are currently used to read/write
from/to the FIFO, and although they operate correctly in this burst mode on
the SPI bus, they would corrupt the regmap cache if it was not disabled
manually. The reason is that when the R/W size is more than 1 byte, these
functions assume that the register address is incremented and handle the
cache accordingly.
Convert FIFO R/W functions to use the regmap _noinc_ versions in order to
remove the manual cache control which was a workaround when using the
_raw_ versions. FIFO registers are properly declared as volatile so
cache will not be used/updated for FIFO accesses.
Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@hugovil.com
Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35f20786c481d5ced9283ff42de5c69b65e5ed13 upstream.
arch/powerpc/lib/xor_vmx.o is built with '-msoft-float' (from the main
powerpc Makefile) and '-maltivec' (from its CFLAGS), which causes an
error when building with clang after a recent change in main:
error: option '-msoft-float' cannot be specified with '-maltivec'
make[6]: *** [scripts/Makefile.build:243: arch/powerpc/lib/xor_vmx.o] Error 1
Explicitly add '-mhard-float' before '-maltivec' in xor_vmx.o's CFLAGS
to override the previous inclusion of '-msoft-float' (as the last option
wins), which matches how other areas of the kernel use '-maltivec', such
as AMDGPU.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1986
Link: 4792f912b2
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240127-ppc-xor_vmx-drop-msoft-float-v1-1-f24140e81376@kernel.org
[nathan: Fixed conflicts due to lack of 04e85bbf71c9 in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f45812cc23fb74bef62d4eb8a69fe7218f4b9f2a upstream.
Work around a quirk in a few old (2011-ish) UEFI implementations, where
a call to `GetNextVariableName` with a buffer size larger than 512 bytes
will always return EFI_INVALID_PARAMETER.
There is some lore around EFI variable names being up to 1024 bytes in
size, but this has no basis in the UEFI specification, and the upper
bounds are typically platform specific, and apply to the entire variable
(name plus payload).
Given that Linux does not permit creating files with names longer than
NAME_MAX (255) bytes, 512 bytes (== 256 UTF-16 characters) is a
reasonable limit.
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[timschumi@gmx.de: adjusted diff for changed context and code move]
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b959ba22d34ca793ffdb15b5715457c78e38b1a upstream.
perf_output_read_group may respond to IPI request of other cores and invoke
__perf_install_in_context function. As a result, hwc configuration is modified.
causing inconsistency and unexpected consequences.
Interrupts are not disabled when perf_output_read_group reads PMU counter.
In this case, IPI request may be received from other cores.
As a result, PMU configuration is modified and an error occurs when
reading PMU counter:
CPU0 CPU1
__se_sys_perf_event_open
perf_install_in_context
perf_output_read_group smp_call_function_single
for_each_sibling_event(sub, leader) { generic_exec_single
if ((sub != event) && remote_function
(sub->state == PERF_EVENT_STATE_ACTIVE)) |
<enter IPI handler: __perf_install_in_context> <----RAISE IPI-----+
__perf_install_in_context
ctx_resched
event_sched_out
armpmu_del
...
hwc->idx = -1; // event->hwc.idx is set to -1
...
<exit IPI>
sub->pmu->read(sub);
armpmu_read
armv8pmu_read_counter
armv8pmu_read_hw_counter
int idx = event->hw.idx; // idx = -1
u64 val = armv8pmu_read_evcntr(idx);
u32 counter = ARMV8_IDX_TO_COUNTER(idx); // invalid counter = 30
read_pmevcntrn(counter) // undefined instruction
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220902082918.179248-1-yangjihong1@huawei.com
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a0180129d726a4b953232175857d442651b55a0 upstream.
Mitigation for RFDS requires RFDS_CLEAR capability which is enumerated
by MSR_IA32_ARCH_CAPABILITIES bit 27. If the host has it set, export it
to guests so that they can deploy the mitigation.
RFDS_NO indicates that the system is not vulnerable to RFDS, export it
to guests so that they don't deploy the mitigation unnecessarily. When
the host is not affected by X86_BUG_RFDS, but has RFDS_NO=0, synthesize
RFDS_NO to the guest.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8076fcde016c9c0e0660543e67bff86cb48a7c9c upstream.
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
[ pawan: - Resolved conflicts in sysfs reporting.
- s/ATOM_GRACEMONT/ALDERLAKE_N/ATOM_GRACEMONT is called
ALDERLAKE_N in 6.6. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e95df4ec0c0c9791941f112db699fae794b9862a upstream.
Currently MMIO Stale Data mitigation for CPUs not affected by MDS/TAA is
to only deploy VERW at VMentry by enabling mmio_stale_data_clear static
branch. No mitigation is needed for kernel->user transitions. If such
CPUs are also affected by RFDS, its mitigation may set
X86_FEATURE_CLEAR_CPU_BUF to deploy VERW at kernel->user and VMentry.
This could result in duplicate VERW at VMentry.
Fix this by disabling mmio_stale_data_clear static branch when
X86_FEATURE_CLEAR_CPU_BUF is enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43fb862de8f628c5db5e96831c915b9aebf62d33 upstream.
During VMentry VERW is executed to mitigate MDS. After VERW, any memory
access like register push onto stack may put host data in MDS affected
CPU buffers. A guest can then use MDS to sample host data.
Although likelihood of secrets surviving in registers at current VERW
callsite is less, but it can't be ruled out. Harden the MDS mitigation
by moving the VERW mitigation late in VMentry path.
Note that VERW for MMIO Stale Data mitigation is unchanged because of
the complexity of per-guest conditional VERW which is not easy to handle
that late in asm with no GPRs available. If the CPU is also affected by
MDS, VERW is unconditionally executed late in asm regardless of guest
having MMIO access.
[ pawan: conflict resolved in backport ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Sean Christopherson <seanjc@google.com>
commit 706a189dcf74d3b3f955e9384785e726ed6c7c80 upstream.
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus
VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF,
for MDS mitigations as late as possible without needing to duplicate VERW
for both paths.
[ pawan: resolved merge conflict in __vmx_vcpu_run in backport. ]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6613d82e617dd7eb8b0c40b2fe3acea655b1d611 upstream.
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0e2dab44d22b913b4c228c8b52b2a104434b0b3 upstream.
As done for entry_64, add support for executing VERW late in exit to
user path for 32-bit mode.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c7501722e6b31a6e56edd23cea5e77dbb9ffd1a upstream.
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to user.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
[ pawan: resolved conflict in syscall_return_via_sysret, added
CLEAR_CPU_BUFFERS to USERGS_SYSRET64 ]
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baf8361e54550a48a7087b603313ad013cc13386 upstream.
MDS mitigation requires clearing the CPU buffers before returning to
user. This needs to be done late in the exit-to-user path. Current
location of VERW leaves a possibility of kernel data ending up in CPU
buffers for memory accesses done after VERW such as:
1. Kernel data accessed by an NMI between VERW and return-to-user can
remain in CPU buffers since NMI returning to kernel does not
execute VERW to clear CPU buffers.
2. Alyssa reported that after VERW is executed,
CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system
call. Memory accesses during stack scrubbing can move kernel stack
contents into CPU buffers.
3. When caller saved registers are restored after a return from
function executing VERW, the kernel stack accesses can remain in
CPU buffers(since they occur after VERW).
To fix this VERW needs to be moved very late in exit-to-user path.
In preparation for moving VERW to entry/exit asm code, create macros
that can be used in asm. Also make VERW patching depend on a new feature
flag X86_FEATURE_CLEAR_CPU_BUF.
[pawan: - Runtime patch jmp instead of verw in macro CLEAR_CPU_BUFFERS
due to lack of relative addressing support for relocations
in kernels < v6.5.
- Add UNWIND_HINT_EMPTY to avoid warning:
arch/x86/entry/entry.o: warning: objtool: mds_verw_sel+0x0: unreachable instruction]
Reported-by: Alyssa Milburn <alyssa.milburn@intel.com>
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: "H. Peter Anvin (Intel)" <hpa@zytor.com>
commit f87bc8dc7a7c438c70f97b4e51c76a183313272e upstream.
Add a macro _ASM_RIP() to add a (%rip) suffix on 64 bits only. This is
useful for immediate memory references where one doesn't want gcc
to possibly use a register indirection as it may in the case of an "m"
constraint.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lkml.kernel.org/r/20210910195910.2542662-3-hpa@zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c853a5783ebe123847886d432354931874367292 upstream.
Instead of using kmalloc() to allocate btrfs_ioctl_defrag_range_args,
allocate btrfs_ioctl_defrag_range_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_defrag_range_args) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ This patch is needed to fix a memory leak of "range" that was
introduced when commit 173431b274a9 ("btrfs: defrag: reject unknown
flags of btrfs_ioctl_defrag_range_args") was backported to kernels
lacking this patch. Now with these two patches applied in reverse order,
range->flags needed to change back to range.flags.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.]
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa765c4b4aed2d64266b694520ecb025c862c5a9 upstream.
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
CPU0 CPU1
shutdown_pirq {
xen_evtchn_close(e)
__startup_pirq {
EVTCHNOP_bind_pirq
-> returns just freed evtchn e
set_evtchn_to_irq(e, irq)
}
xen_irq_info_cleanup() {
set_evtchn_to_irq(e, -1)
}
}
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
------------[ cut here ]------------
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
kernel BUG at drivers/xen/events/events_base.c:499!
invalid opcode: 0000 [#1] SMP PTI
CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1
Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006
Workqueue: nvme-reset-wq nvme_reset_work
RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0
Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00
RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff
RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? show_trace_log_lvl+0x1c1/0x2d9
? show_trace_log_lvl+0x1c1/0x2d9
? set_affinity_irq+0xdc/0x1c0
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0x90/0x110
? bind_evtchn_to_cpu+0xdf/0xf0
? do_error_trap+0x65/0x80
? bind_evtchn_to_cpu+0xdf/0xf0
? exc_invalid_op+0x4e/0x70
? bind_evtchn_to_cpu+0xdf/0xf0
? asm_exc_invalid_op+0x12/0x20
? bind_evtchn_to_cpu+0xdf/0xf0
? bind_evtchn_to_cpu+0xc5/0xf0
set_affinity_irq+0xdc/0x1c0
irq_do_set_affinity+0x1d7/0x1f0
irq_setup_affinity+0xd6/0x1a0
irq_startup+0x8a/0xf0
__setup_irq+0x639/0x6d0
? nvme_suspend+0x150/0x150
request_threaded_irq+0x10c/0x180
? nvme_suspend+0x150/0x150
pci_request_irq+0xa8/0xf0
? __blk_mq_free_request+0x74/0xa0
queue_request_irq+0x6f/0x80
nvme_create_queue+0x1af/0x200
nvme_create_io_queues+0xbd/0xf0
nvme_setup_io_queues+0x246/0x320
? nvme_irq_check+0x30/0x30
nvme_reset_work+0x1c8/0x400
process_one_work+0x1b0/0x350
worker_thread+0x49/0x310
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Modules linked in:
---[ end trace a11715de1eee1873 ]---
Fixes: d46a78b05c0e ("xen: implement pirq type event channels")
Cc: stable@vger.kernel.org
Co-debugged-by: Andrew Panyakin <apanyaki@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240124163130.31324-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
[apanyaki: backport to v5.10-stable]
Signed-off-by: Andrew Paniakin <apanyaki@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 961ebd120565cb60cebe21cb634fbc456022db4a upstream.
The first kiocb_set_cancel_fn() argument may point at a struct kiocb
that is not embedded inside struct aio_kiocb. With the current code,
depending on the compiler, the req->ki_ctx read happens either before
the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such
that it is guaranteed that the IOCB_AIO_RW test happens first.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Benjamin LaHaise <ben@communityfibre.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Fixes: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240304235715.3790858-1-bvanassche@acm.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1581dafaf0d34bc9c428a794a22110d7046d186d upstream.
This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74cb7e0355fae9641f825afa389d3fba3b617714 upstream.
If the remote uart device is not connected or not enabled after booting
up, the CTS line is high by default. At this time, if we enable the flow
control when opening the device(for example, using “stty -F /dev/ttyLP4
crtscts” command), there will be a pending idle preamble(first writing 0
and then writing 1 to UARTCTRL_TE will queue an idle preamble) that
cannot be sent out, resulting in the uart port fail to close(waiting for
TX empty), so the user space stty will have to wait for a long time or
forever.
This is an LPUART IP bug(idle preamble has higher priority than CTS),
here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE,
so that the idle preamble does not get stuck due to CTS is deasserted.
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f90ce1e04cbcc76639d6cba0fdbd820cd80b3c70 upstream.
While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX
set to 65536, it has been observed that we receive short packets,
which come at interval of 5-10 seconds sometimes and have block
length zero but still contain 1-2 valid datagrams present.
According to the NCM spec:
"If wBlockLength = 0x0000, the block is terminated by a
short packet. In this case, the USB transfer must still
be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If
exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent,
and the size is a multiple of wMaxPacketSize for the
given pipe, then no ZLP shall be sent.
wBlockLength= 0x0000 must be used with extreme care, because
of the possibility that the host and device may get out of
sync, and because of test issues.
wBlockLength = 0x0000 allows the sender to reduce latency by
starting to send a very large NTB, and then shortening it when
the sender discovers that there’s not sufficient data to justify
sending a large NTB"
However, there is a potential issue with the current implementation,
as it checks for the occurrence of multiple NTBs in a single
giveback by verifying if the leftover bytes to be processed is zero
or not. If the block length reads zero, we would process the same
NTB infintely because the leftover bytes is never zero and it leads
to a crash. Fix this by bailing out if block length reads zero.
Cc: stable@vger.kernel.org
Fixes: 427694cfaafa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 014bcf41d946b36a8f0b8e9b5d9529efbb822f49 upstream.
The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values
in the ATA ID information to calculate cylinder and head values when
creating a CDB for READ or WRITE commands. The calculation involves
division and modulus operations, which will cause a crash if either of
these values is 0. While this never happens with a genuine device, it
could happen with a flawed or subversive emulation, as reported by the
syzbot fuzzer.
Protect against this possibility by refusing to bind to the device if
either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID
information is 0. This requires isd200_Initialization() to return a
negative error code when initialization fails; currently it always
returns 0 (even when there is an error).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+28748250ab47a8f04100@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-usb/0000000000003eb868061245ba7f@google.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/b1e605ea-333f-4ac0-9511-da04f411763e@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d397b6e56151099cf3b1f7bfccb204a6a8591720 upstream.
Headset Mic will no show at resume back.
This patch will fix this issue.
Fixes: d7f32791a9fc ("ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4713d48a372e47f98bba0c6120fd8254@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef1d8c1ddbf696e47b226e11888eaf8d9e8e807 upstream.
Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock to fix use-after-free issues where region and/or its
array of pages could be freed by a different task, e.g. if userspace has
__unregister_enc_region_locked() already queued up for the region.
Note, the "obvious" alternative of using local variables doesn't fully
resolve the bug, as region->pages is also dynamically allocated. I.e. the
region structure itself would be fine, but region->pages could be freed.
Flushing multiple pages under kvm->lock is unfortunate, but the entire
flow is a rare slow path, and the manual flush is only needed on CPUs that
lack coherency for encrypted memory.
Fixes: 19a23da53932 ("Fix unsynchronized access to sev members through svm_register_enc_region")
Reported-by: Gabe Kirkpatrick <gkirkpatrick@google.com>
Cc: Josh Eads <josheads@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20240217013430.2079561-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a807e46aa93ebad1dfbed4f82dc3bf779423a6e upstream.
After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().
In file included from net/xfrm/xfrm_user.c:14:
...
include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
438 | __write_overflow_field(p_size_field, size);
| ^
1 error generated.
While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().
To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8209544296edbd1af186e2ea9c648642c37b18c upstream.
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size. The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.
In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.
Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes. "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE). For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header. In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header. For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header. In such a case, the memory allocation
is less efficient, but it's the best that can be done.
While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.
Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL")
Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240229004533.313662-1-mhklinux@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f4fc4bd5cddb4770ab120ce44f02695c4505562 upstream.
This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.
Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16603605b667b70da974bea8216c93e7db043bf1 upstream.
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.
Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 552705a3650bbf46a22b1adedc1b04181490fc36 upstream.
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.
Cc: stable@vger.kernel.org
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f53641a6e849034a44bf80f50245a75d7a376025 upstream.
The comedi_test devices have a couple of timers (ai_timer and ao_timer)
that can be started to simulate hardware interrupts. Their expiry
functions normally reschedule the timer. The driver code calls either
del_timer_sync() or del_timer() to delete the timers from the queue, but
does not currently prevent the timers from rescheduling themselves so
synchronized deletion may be ineffective.
Add a couple of boolean members (one for each timer: ai_timer_enable and
ao_timer_enable) to the device private data structure to indicate
whether the timers are allowed to reschedule themselves. Set the member
to true when adding the timer to the queue, and to false when deleting
the timer from the queue in the waveform_ai_cancel() and
waveform_ao_cancel() functions.
The del_timer_sync() function is also called from the waveform_detach()
function, but the timer enable members will already be set to false when
that function is called, so no change is needed there.
Fixes: 403fe7f34e33 ("staging: comedi: comedi_test: fix timer race conditions")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240214100747.16203-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The backport of commit 3080ea5553cc ("stddef: Introduce
DECLARE_FLEX_ARRAY() helper") to 5.10.y (as a prerequisite of another
fix) modified scripts/kernel-doc and introduced a syntax error:
Global symbol "$args" requires explicit package name (did you forget to declare "my $args"?) at ./scripts/kernel-doc line 1236.
Global symbol "$args" requires explicit package name (did you forget to declare "my $args"?) at ./scripts/kernel-doc line 1236.
Execution of ./scripts/kernel-doc aborted due to compilation errors.
Note: The issue could be fixed in the 5.10.y series as well by
backporting e86bdb24375a ("scripts: kernel-doc: reduce repeated regex
expressions into variables") but just replacing the undeclared args back
to ([^,)]+) was the most straightforward approach. The issue is specific
to the backport to the 5.10.y series. Thus there is as well no upstream
commit for this change.
Fixes: 443b16ee3d9c ("stddef: Introduce DECLARE_FLEX_ARRAY() helper") # 5.10.y
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/regressions/ZeHKjjPGoyv_b2Tg@eldamar.lan/T/#u
Link: https://bugs.debian.org/1064035
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e3f269ed0accbb22aa8f25d2daffa23c3fccd407 ]
Since:
7ee18d677989 ("x86/power: Make restore_processor_context() sane")
kmemleak reports this issue:
unreferenced object 0xf68241e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s)
hex dump (first 32 bytes):
00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)...........
00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B..............
backtrace:
[<461c1d50>] __kmem_cache_alloc_node+0x106/0x260
[<ea65e13b>] __kmalloc+0x54/0x160
[<c3858cd2>] msr_build_context.constprop.0+0x35/0x100
[<46635aff>] pm_check_save_msr+0x63/0x80
[<6b6bb938>] do_one_initcall+0x41/0x1f0
[<3f3add60>] kernel_init_freeable+0x199/0x1e8
[<3b538fde>] kernel_init+0x1a/0x110
[<938ae2b2>] ret_from_fork+0x1c/0x28
Which is a false positive.
Reproducer:
- Run rsync of whole kernel tree (multiple times if needed).
- start a kmemleak scan
- Note this is just an example: a lot of our internal tests hit these.
The root cause is similar to the fix in:
b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context()
ie. the alignment within the packed struct saved_context
which has everything unaligned as there is only "u16 gs;" at start of
struct where in the past there were four u16 there thus aligning
everything afterwards. The issue is with the fact that Kmemleak only
searches for pointers that are aligned (see how pointers are scanned in
kmemleak.c) so when the struct members are not aligned it doesn't see
them.
Testing:
We run a lot of tests with our CI, and after applying this fix we do not
see any kmemleak issues any more whilst without it we see hundreds of
the above report. From a single, simple test run consisting of 416 individual test
cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this,
which is quite a lot. With this fix applied we get zero kmemleak related failures.
Fixes: 7ee18d677989 ("x86/power: Make restore_processor_context() sane")
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240314142656.17699-1-anton@tuxera.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fb0fdb3bbe7aed495109b3296b06c2409734023 ]
On 32-bit kernels, the stackprotector canary is quite nasty -- it is
stored at %gs:(20), which is nasty because 32-bit kernels use %fs for
percpu storage. It's even nastier because it means that whether %gs
contains userspace state or kernel state while running kernel code
depends on whether stackprotector is enabled (this is
CONFIG_X86_32_LAZY_GS), and this setting radically changes the way
that segment selectors work. Supporting both variants is a
maintenance and testing mess.
Merely rearranging so that percpu and the stack canary
share the same segment would be messy as the 32-bit percpu address
layout isn't currently compatible with putting a variable at a fixed
offset.
Fortunately, GCC 8.1 added options that allow the stack canary to be
accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary
percpu variable. This lets us get rid of all of the code to manage the
stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess.
(That name is special. We could use any symbol we want for the
%fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any
name other than __stack_chk_guard.)
Forcibly disable stackprotector on older compilers that don't support
the new options and turn the stack canary into a percpu variable. The
"lazy GS" approach is now used for all 32-bit configurations.
Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels,
it loads the GS selector and updates the user GSBASE accordingly. (This
is unchanged.) On 32-bit kernels, it loads the GS selector and updates
GSBASE, which is now always the user base. This means that the overall
effect is the same on 32-bit and 64-bit, which avoids some ifdeffery.
[ bp: Massage commit message. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org
Stable-dep-of: e3f269ed0acc ("x86/pm: Work around false positive kmemleak report in msr_build_context()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6bf4776d9e2ed4b2552d1c252fff8de3786309a ]
Remove unnecessary cast in the argument to kfree.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20201023085533.4792-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e3f269ed0acc ("x86/pm: Work around false positive kmemleak report in msr_build_context()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e7132ed3c07bd8a6ce3db4bb307ef2852b322dc ]
There was reported lockup when we exit a snapshot with many exceptions.
Fix this by adding "cond_resched" to the loop that frees the exceptions.
Reported-by: John Pittman <jpittman@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69e3be6893a7e668660b05a966bead82bbddb01d ]
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64b3f55e458ce7e2087a0051f47edabf74545e7 ]
[WHY & HOW]
If the display is null when creating an HDCP session, return a proper
error code.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cd8adc3e18960f6e59d797285ed34ef473cc896 ]
Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.
While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)
Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.
What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).
Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.
Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.
This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.
Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.
This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).
However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.
Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports")
Cc: stable@vger.kernel.org
Reported-by: Matt <cryptearth@googlemail.com>
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71cbd32e3db82ea4a74e3ef9aeeaa6971969c86f ]
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55b6c738673871c9b0edae05d0c97995c1ff08c4 ]
If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.
Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.
It can be reproduced by a small script like:
echo "Setting config..."
ip link add dev wg0 type wireguard
wg setconf wg0 /big-config
(
while true; do
echo "Showing config..."
wg showconf wg0 > /dev/null
done
) &
sleep 4
wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")
Resulting in:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
Read of size 8 at addr ffff88811956ec70 by task wg/59
CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
print_address_description.constprop.0+0x2c/0x380
print_report+0xab/0x250
kasan_report+0xba/0xf0
__lock_acquire+0x182a/0x1b20
lock_acquire+0x191/0x4b0
down_read+0x80/0x440
get_peer+0x140/0xcb0
wg_get_device_dump+0x471/0x1130
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <lillian@star-ark.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9952e8d80cca2da3b47ecd5ad9ec16cfd1a649 ]
The __string() and __assign_str() helper macros of the TRACE_EVENT() macro
are going through some optimizations where only the source string of
__string() will be used and the __assign_str() source will be ignored and
later removed.
To make sure that there's no issues, a new check is added between the
__string() src argument and the __assign_str() src argument that does a
strcmp() to make sure they are the same string.
The hclgevf trace events have:
__assign_str(devname, &hdev->nic.kinfo.netdev->name);
Which triggers the warning:
hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types]
34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name);
[..]
arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’
75 | int strcmp(const char *cs, const char *ct);
| ~~~~~~~~~~~~^~
Because __assign_str() now has:
WARN_ON_ONCE(__builtin_constant_p(src) ? \
strcmp((src), __data_offsets.dst##_ptr_) : \
(src) != __data_offsets.dst##_ptr_); \
The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because
that name is:
char name[IFNAMSIZ]
Where passing an address '&' of a char array is not compatible with strcmp().
The '&' is not necessary, remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20240313093454.3909afe7@gandalf.local.home
Cc: netdev <netdev@vger.kernel.org>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Yufeng Mo <moyufeng@huawei.com>
Cc: Huazhong Tan <tanhuazhong@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
