[ Upstream commit 13dee10b30c058ee2c58c5da00339cc0d4201aa6 ]
When we reconfigure, the driver might do some things to complete
the reconfiguration. It's strange and could be broken in some
cases because we restart other works (e.g. remain-on-channel and
TX) before this happens, yet only start queues later.
Change this to do the reconfig complete when reconfiguration is
actually complete, not when we've already started doing other
things again.
For iwlwifi, this should fix a race where the reconfig can race
with TX, for ath10k and ath11k that also use this it won't make
a difference because they just start queues there, and mac80211
also stopped the queues and will restart them later as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76d3ddff7153cc0bcc14a63798d19f5d0693ea71 ]
There is a race between the CREQ tasklet and destroy qp when accessing the
qp-handle table. There is a chance of reading a valid qp-handle in the
CREQ tasklet handler while the QP is already moving ahead with the
destruction.
Fixing this race by implementing a table-lock to synchronize the access.
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Link: https://patch.msgid.link/r/1728912975-19346-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78ed28e08e74da6265e49e19206e1bcb8b9a7f0d ]
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89f8c6f197f480fe05edf91eb9359d5425869d04 ]
Restore the missing functionality to dump vendor specific QP details,
which was mistakenly removed in the commit mentioned in Fixes line.
Fixes: 5cc34116ccec ("RDMA: Add dedicated QP resource tracker function")
Link: https://patch.msgid.link/r/ed9844829135cfdcac7d64285688195a5cd43f82.1728323026.git.leonro@nvidia.com
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Closes: https://lore.kernel.org/all/Zv_4qAxuC0dLmgXP@gallifrey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73b2069528f90ec49d5fa1010a759baa2c2be05 ]
When tracing is disabled, there is no point in asking the user about
enabling Broadcom wireless device tracing.
Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3e046c31441d182b954fc2f57b2dc38c71ad4bc ]
When tracing is disabled, there is no point in asking the user about
enabling tracing of all mac80211 debug messages.
Fixes: 3fae0273168026ed ("mac80211: trace debug messages")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/85bbe38ce0df13350f45714e2dc288cc70947a19.1727179690.git.geert@linux-m68k.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cc4e13bb1617f6a13e5e6882465984148743cf4 ]
cgroup.max.depth is the maximum allowed descent depth below the current
cgroup. If the actual descent depth is equal or larger, an attempt to
create a new child cgroup will fail. However due to the cgroup->max_depth
is of int type and having the default value INT_MAX, the condition
'level > cgroup->max_depth' will never be satisfied, and it will cause
an overflow of the level after it reaches to INT_MAX.
Fix it by starting the level from 0 and using '>=' instead.
It's worth mentioning that this issue is unlikely to occur in reality,
as it's impossible to have a depth of INT_MAX hierarchy, but should be
be avoided logically.
Fixes: 1a926e0bbab8 ("cgroup: implement hierarchy limits")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76503e1fa1a53ef041a120825d5ce81c7fe7bdd7 ]
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f0ab59e6537c6a8f9e1b355b48f9c05a76e8563 ]
This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on.
Reported-by: syzbot+cc39f136925517aed571@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef08c0fadd8a17ebe429b85e23952dac3263ad34 upstream.
After we fixed the uprobe inst endian in aarch_be, the sparse check report
the following warning info:
sparse warnings: (new ones prefixed by >>)
>> kernel/events/uprobes.c:223:25: sparse: sparse: restricted __le32 degrades to integer
>> kernel/events/uprobes.c:574:56: sparse: sparse: incorrect type in argument 4 (different base types)
@@ expected unsigned int [addressable] [usertype] opcode @@ got restricted __le32 [usertype] @@
kernel/events/uprobes.c:574:56: sparse: expected unsigned int [addressable] [usertype] opcode
kernel/events/uprobes.c:574:56: sparse: got restricted __le32 [usertype]
>> kernel/events/uprobes.c:1483:32: sparse: sparse: incorrect type in initializer (different base types)
@@ expected unsigned int [usertype] insn @@ got restricted __le32 [usertype] @@
kernel/events/uprobes.c:1483:32: sparse: expected unsigned int [usertype] insn
kernel/events/uprobes.c:1483:32: sparse: got restricted __le32 [usertype]
use the __le32 to u32 for uprobe_opcode_t, to keep the same.
Fixes: 60f07e22a73d ("arm64:uprobe fix the uprobe SWBP_INSN in big-endian")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: junhua huang <huang.junhua@zte.com.cn>
Link: https://lore.kernel.org/r/202212280954121197626@zte.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49da1463c9e3d2082276c3e0e2a8b65a88711cd2 upstream.
A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could
possibly return NULL pointer. NULL Pointer Dereference may be
triggerred without addtional check.
Add a NULL check for the returned pointer.
Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Cc: stable@vger.kernel.org
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241006205737.8829-1-zichenxie0106@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de96f6a3003513c796bbe4e23210a446913f5c00 upstream.
This change fixes a rare issue where the PHY fails to detect a link
due to incorrect reset behavior.
The SW_RESET definition was incorrectly assigned to bit 14, which is the
Digital Restart bit according to the datasheet. This commit corrects
SW_RESET to bit 15 and assigns DIG_RESTART to bit 14 as per the
datasheet specifications.
The SW_RESET define is only used in the phy_reset function, which fully
re-initializes the PHY after the reset is performed. The change in the
bit definitions should not have any negative impact on the functionality
of the PHY.
v2:
- added Fixes tag
- improved commit message
Cc: stable@vger.kernel.org
Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection")
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <AS1P250MB0608A798661549BF83C4B43EA9462@AS1P250MB0608.EURP250.PROD.OUTLOOK.COM>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42c773238037c90b3302bf37a57ae3b5c3f6004a ]
Move our existing input sanity checking to the top of sel_write_load()
and add a check to ensure the buffer size is non-zero.
Move a local variable initialization from the declaration to before it
is used.
Minor style adjustments.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
[cascardo: keep fsi initialization at its declaration point as it is used earlier]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4c262801ea60c518b5bebc22a09f5b78b3147da2 upstream.
The existing code moves VF to the same namespace as the synthetic NIC
during netvsc_register_vf(). But, if the synthetic device is moved to a
new namespace after the VF registration, the VF won't be moved together.
To make the behavior more consistent, add a namespace check for synthetic
NIC's NETDEV_REGISTER event (generated during its move), and move the VF
if it is not in the same namespace.
Cc: stable@vger.kernel.org
Fixes: c0a41b887ce6 ("hv_netvsc: move VF to same namespace as netvsc device")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1729275922-17595-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35fdc6e1c16099078bcbd73a6c8f1733ae7f1909 upstream.
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed
correctly.
This patch adds a quirk with the proper pin connections.
Note that I do not own this laptop, so I cannot guarantee that this
fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482
This model appears to have two different dev IDs...
- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)
I don't think the audio system was changed between model revisions, so
the patch applies for both IDs.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f559b2e9c5c5308850544ab59396b7d53cfc67bd upstream.
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be01 ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Reported-by: Kirk Swidowski <swidowski@google.com>
Cc: Andy Nguyen <theflow@google.com>
Cc: 3pvd <3pvd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f92f0a1b05698340836229d791b3ffecc71b265a upstream.
While we do currently return -EFAULT in this case, it seems prudent to
follow the behaviour of other syscalls like clone3. It seems quite
unlikely that anyone depends on this error code being EFAULT, but we can
always revert this if it turns out to be an issue.
Cc: stable@vger.kernel.org # v5.6+
Fixes: fddb5d430ad9 ("open: introduce openat2(2) syscall")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20241010-extensible-structs-check_fields-v3-3-d2833dfe6edd@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ed469df0bfbef3e4b44fca954a781919db9f7ab upstream.
Syzbot reported that after nilfs2 reads a corrupted file system image
and degrades to read-only, the BUG_ON check for the buffer delay flag
in submit_bh_wbc() may fail, causing a kernel bug.
This is because the buffer delay flag is not cleared when clearing the
buffer state flags to discard a page/folio or a buffer head. So, fix
this.
This became necessary when the use of nilfs2's own page clear routine
was expanded. This state inconsistency does not occur if the buffer
is written normally by log writing.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Link: https://lore.kernel.org/r/20241015213300.7114-1-konishi.ryusuke@gmail.com
Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Reported-by: syzbot+985ada84bf055a575c07@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=985ada84bf055a575c07
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fa73ee44daefc884c53a25158c25a4107eb5a94 upstream.
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com>
Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53f1a907d36fb3aa02a4d34073bcec25823a6c74 upstream.
The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Dirk Holten <dirk.holten@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382
Cc: All applicable <stable@vger.kernel.org>
Suggested-by: Dirk Holten <dirk.holten@gmx.de>
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf58f03931fdcf7b3c45cb76ac13244477a60f44 upstream.
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72cafe63b35d06b5cfbaf807e90ae657907858da ]
The step variable is initialized to zero. It is changed in the loop,
but if it's not changed it will remain zero. Add a variable check
before the division.
The observed behavior was introduced by commit 826b5de90c0b
("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"),
and it is difficult to show that any of the interval parameters will
satisfy the snd_interval_test() condition with data from the
amdtp_rate_table[] table.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20241018060018.1189537-1-shum.sdl@nppct.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e62807c7fbb3c758d233018caf94dfea9c65dbd ]
If get_clock_desc() succeeds, it calls fget() for the clockid's fd,
and get the clk->rwsem read lock, so the error path should release
the lock to make the lock balance and fput the clockid's fd to make
the refcount balance and release the fd related resource.
However the below commit left the error path locked behind resulting in
unbalanced locking. Check timespec64_valid_strict() before
get_clock_desc() to fix it, because the "ts" is not changed
after that.
Fixes: d8794ac20a29 ("posix-clock: Fix missing timespec64 check in pc_clock_settime()")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
[pabeni@redhat.com: fixed commit message typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10ce0db787004875f4dba068ea952207d1d8abeb ]
It was reported that after resume from suspend a PCI error is logged
and connectivity is broken. Error message is:
PCI error (cmd = 0x0407, status_errs = 0x0000)
The message seems to be a red herring as none of the error bits is set,
and the PCI command register value also is normal. Exception handling
for a PCI error includes a chip reset what apparently brakes connectivity
here. The interrupt status bit triggering the PCI error handling isn't
actually used on PCIe chip versions, so it's not clear why this bit is
set by the chip. Fix this by ignoring this bit on PCIe chip versions.
Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388
Tested-by: Atlas Yu <atlas.yu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f504465970aebb2467da548f7c1efbbf36d0f44b ]
In 'taprio_change()', 'admin' pointer may become dangling due to sched
switch / removal caused by 'advance_sched()', and critical section
protected by 'q->current_entry_lock' is too small to prevent from such
a scenario (which causes use-after-free detected by KASAN). Fix this
by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update
'admin' immediately before an attempt to schedule freeing.
Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule")
Reported-by: syzbot+b65e0af58423fc8a73aa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20241018051339.418890-1-dmantipov@yandex.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a7d12d674ac6f2147c18f36d1e15f1a48060edf ]
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Greg Thelen <gthelen@google.com>
Diagnosed-by: John Sperbeck <jsperbeck@google.com>
Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC")
Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4dd8bfe0f6a23acd305f9b892c00899089bd621 ]
The be_xmit() returns NETDEV_TX_OK without freeing skb
in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Message-ID: <20241015144802.12150-1-wanghai38@huawei.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cb3f56e827abb22c4168ad0c1bbbf401bb2f3b8 ]
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015144148.7918-1-wanghai38@huawei.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8469721034300bbb6dec5b4bf32492c95e16a0c ]
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05af0 ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b6e2e22cb23105fcb171ab92f0f7516c69c8471 ]
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it.
Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/
Fixes: dec65d79fd26 ("tracing/probe: Check event name length correctly")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67373ca8404fe57eb1bb4b57f314cff77ce54932 ]
MAXAG is a legitimate value for bmp->db_numag
Fixes: e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abe390e689f4f5c23c5f507754f8678431b4f72 ]
Certain portions of code always need to be position-independent
regardless of CONFIG_RELOCATABLE, including code which is executed in an
idmap or which is executed before relocations are applied. In some
kernel configurations the LLD linker generates position-dependent
veneers for such code, and when executed these result in early boot-time
failures.
Marc Zyngier encountered a boot failure resulting from this when
building a (particularly cursed) configuration with LLVM, as he reported
to the list:
https://lore.kernel.org/linux-arm-kernel/86wmjwvatn.wl-maz@kernel.org/
In Marc's kernel configuration, the .head.text and .rodata.text sections
end up more than 128MiB apart, requiring a veneer to branch between the
two:
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w _text
| ffff800080000000 g .head.text 0000000000000000 _text
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w primary_entry
| ffff8000889df0e0 g .rodata.text 000000000000006c primary_entry,
... consequently, LLD inserts a position-dependent veneer for the branch
from _stext (in .head.text) to primary_entry (in .rodata.text):
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64AbsLongThunk_primary_entry>
...
| ffff800080010000 <__AArch64AbsLongThunk_primary_entry>:
| ffff800080010000: 58000050 ldr x16, ffff800080010008 <__AArch64AbsLongThunk_primary_entry+0x8>
| ffff800080010004: d61f0200 br x16
| ffff800080010008: 889df0e0 .word 0x889df0e0
| ffff80008001000c: ffff8000 .word 0xffff8000
... and as this is executed early in boot before the kernel is mapped in
TTBR1 this results in a silent boot failure.
Fix this by passing '--pic-veneer' to the linker, which will cause the
linker to use position-independent veneers, e.g.
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64ADRPThunk_primary_entry>
...
| ffff800080010000 <__AArch64ADRPThunk_primary_entry>:
| ffff800080010000: f004e3f0 adrp x16, ffff800089c8f000 <__idmap_text_start>
| ffff800080010004: 91038210 add x16, x16, #0xe0
| ffff800080010008: d61f0200 br x16
I've opted to pass '--pic-veneer' unconditionally, as:
* In addition to solving the boot failure, these sequences are generally
nicer as they require fewer instructions and don't need to perform
data accesses.
* While the position-independent veneer sequences have a limited +/-2GiB
range, this is not a new restriction. Even kernels built with
CONFIG_RELOCATABLE=n are limited to 2GiB in size as we have several
structues using 32-bit relative offsets and PPREL32 relocations, which
are similarly limited to +/-2GiB in range. These include extable
entries, jump table entries, and alt_instr entries.
* GNU LD defaults to using position-independent veneers, and supports
the same '--pic-veneer' option, so this change is not expected to
adversely affect GNU LD.
I've tested with GNU LD 2.30 to 2.42 inclusive and LLVM 13.0.1 to 19.1.0
inclusive, using the kernel.org binaries from:
* https://mirrors.edge.kernel.org/pub/tools/crosstool/
* https://mirrors.edge.kernel.org/pub/tools/llvm/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marc Zyngier <maz@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240927101838.3061054-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72455e33173c1a00c0ce93d2b0198eb45d5f4195 ]
FCONT=1 means On FIFO error, the SAI will continue from the
same word that caused the FIFO error to set after the FIFO
warning flag has been cleared.
Set FCONT bit in control register to avoid the channel swap
issue after SAI xrun.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1727676508-22830-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92b90f9a54d9300a6e883258e79f36dab53bfae ]
Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with
a real VLA to fix a "memcpy: detected field-spanning write error" warning:
[ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[ 13.320038] Call Trace:
[ 13.320173] hgsmi_update_pointer_shape [vboxvideo]
[ 13.320184] vbox_cursor_atomic_update [vboxvideo]
Note as mentioned in the added comment it seems the original length
calculation for the allocated and send hgsmi buffer is 4 bytes too large.
Changing this is not the goal of this patch, so this behavior is kept.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104523.17442-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
upstream 936e114a245b6e38e0dbf706a67e7611fc993da1 commit.
Move the ki_pos update down a bit to prepare for a better common helper
that invalidates pages based of an iocb.
Link: https://lkml.kernel.org/r/20230601145904.1385409-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d196e7589cefe207d5d41f37a0a28a1fdeeb7c6 ]
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240805131721.765484-1-mjguzik@gmail.com
[brauner: keep redundant path_noexec() check]
Signed-off-by: Christian Brauner <brauner@kernel.org>
[cascardo: keep exit label and use it]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73aeab373557fa6ee4ae0b742c6211ccd9859280 ]
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8061f06185be0a06a73760d6526b8b0feadfe52 ]
Previously, access_guest_page() did not check whether the given guest
address is inside of a memslot. This is not a problem, since
kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot
usually means that an addressing exception should be injected into the
guest.
Failure in copy_to/from_user however indicates that something is wrong
in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in
access_guest_page() when the guest address is outside guest memory. In
access_guest_real(), populate vcpu->arch.pgm.code such that
kvm_s390_inject_prog_cond() can be used in the caller for injecting into
the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make
sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in
guest_range_to_gpas()), so this case should never happen. Even if, the
handling is set up properly.
- access_guest_real() just passes the return code to its callers, which
are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always
return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this
could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on
write_guest_real() failure.
Fixes: 2293897805c2 ("KVM: s390: add architecture compliant guest access functions")
Cc: stable@vger.kernel.org
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7faa543df19bf62d4583a64d3902705747f2ad29 ]
Do not round down the first address to the page boundary, just translate
it normally, which gives the value we care about in the first place.
Given this, translating a single address is just the special case of
translating a range spanning a single page.
Make the output optional, so the function can be used to just check a
range.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20211126164549.7046-3-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 ]
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64a90991ba8d4e32e3173ddd83d0b24167a5668c ]
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 223e7fb979fa06934f1595b6ad0ae1d4ead1147f ]
Also initialize regs->psw.mask in perf_arch_fetch_caller_regs().
This way user_mode(regs) will return false, like it should.
It looks like all current users initialize regs to zero, so that this
doesn't fix a bug currently. However it is better to not rely on callers
to do this.
Fixes: 914d52e46490 ("s390: implement perf_arch_fetch_caller_regs")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ab60323c5201bef25f2a3dc0ccc404d9aca77f1 ]
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb
Reported-by: David Howells <dhowells@redhat.com>
Fixes: e77fe73c7e38 ("cifs: we can not use small padding iovs together with encryption")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
