FireAsf 🔥
Find a file
Raju Rangoju f5ce07c0c5 ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
[ Upstream commit a83e1385b780d41307433ddbc86e3c528db031f0 ]

Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.

However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.

Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions.

Link: https://github.com/acpica/acpica/pull/954
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218849
Fixes: d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."")
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-19 14:19:09 +01:00
.github/workflows
android
arch mips: bmips: BCM6358: make sure CBR is correctly set 2024-11-19 14:19:07 +01:00
block block/ioctl: prefer different overflow check 2024-11-19 14:19:06 +01:00
certs
crypto exit: Rename module_put_and_exit to module_put_and_kthread_exit 2024-11-19 12:27:50 +01:00
Documentation Documentation: Add missing documentation for EXPORT_OP flags 2024-11-19 12:28:33 +01:00
drivers ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine." 2024-11-19 14:19:09 +01:00
firmware/tsp_goodix
fs udf: udftime: prevent overflow in udf_disk_stamp_to_time() 2024-11-19 14:19:07 +01:00
gki
include hugetlb_encode.h: fix undefined behaviour (34 << 26) 2024-11-19 14:19:05 +01:00
init init/main.c: Fix potential static_command_line memory overflow 2024-11-19 11:32:23 +01:00
io_uring io_uring: fail NOP if non-zero op flags is passed in 2024-11-19 12:27:12 +01:00
ipc
kernel tracing: Build event generation tests only as modules 2024-11-19 14:19:07 +01:00
kernel_build kernel_build: build*.sh: Add -Testing223 to zip/tar 2024-11-19 14:18:53 +01:00
kunitconfigs
lib dyndbg: fix old BUG_ON in >control parser 2024-11-19 11:32:49 +01:00
LICENSES
mm Revert "fs: add file and path permissions helpers" 2024-11-19 13:30:21 +01:00
net netfilter: ipset: Fix suspicious rcu_dereference_protected() 2024-11-19 14:19:08 +01:00
samples
scripts kconfig: fix comparison to constant symbols, 'm', 'n' 2024-11-19 12:27:10 +01:00
security ima: fix deadlock when traversing "ima_default_rules". 2024-11-19 12:26:38 +01:00
sound ASoC: Intel: sof_sdw: add JD2 quirk for HP Omen 14 2024-11-19 14:19:07 +01:00
test
tools kselftest: arm64: Add a null pointer check 2024-11-19 14:19:06 +01:00
usr
virt KVM: Always flush async #PF workqueue when vCPU is being destroyed 2024-11-19 09:22:15 +01:00
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.amlogic
build.config.arm
build.config.common
build.config.db845c
build.config.erd8825_a25_s
build.config.erd8825_s
build.config.erd9925_evt0_s
build.config.erd9925_evt0_s5300_s
build.config.erd9925_s
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64
build.config.gki.aarch64.fips140
build.config.gki.aarch64.fips140_eval_testing
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes
build.config.gki_kprobes.aarch64
build.config.gki_kprobes.x86_64
build.config.hikey960
build.config.khwasan
build.config.mcd
build.config.rockchip
build.config.universal2100_s
build.config.universal8825_s
build.config.universal9925_evt0_s
build.config.universal9925_s
build.config.x86_64
build.sh
COPYING
CREDITS
Kbuild
Kconfig
linux-stable.sh
MAINTAINERS
Makefile Linux 5.10.220 2024-11-19 12:28:33 +01:00
OWNERS
README
README.md
vendor_boot_module_order_exynos2100.cfg
vendor_boot_module_order_s5e8825.cfg
vendor_boot_module_order_s5e9925.cfg
vendor_module_list_s5e8825.cfg
vendor_module_list_s5e9925.cfg
vendor_module_list_s5e9925_b0s.cfg
vendor_module_list_s5e9925_g0s.cfg
vendor_module_list_s5e9925_r0s.cfg

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)