FireAsf 🔥
bb5321e6e0
Commit 1d60d74e852647255bd8e76f5a22dc42531e4389 upstream. When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. Cc: stable@vger.kernel.org # 5.10+ Reported-by: Peter Mann <peter.mann@sh.cz> Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
---|---|---|
.github/workflows | ||
android | ||
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
firmware/tsp_goodix | ||
fs | ||
gki | ||
include | ||
init | ||
io_uring | ||
ipc | ||
kernel | ||
kernel_build | ||
KernelSU@b766b98513 | ||
kunitconfigs | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
test | ||
tools | ||
usr | ||
virt | ||
build.config.aarch64 | ||
build.config.allmodconfig | ||
build.config.allmodconfig.aarch64 | ||
build.config.allmodconfig.arm | ||
build.config.allmodconfig.x86_64 | ||
build.config.amlogic | ||
build.config.arm | ||
build.config.common | ||
build.config.db845c | ||
build.config.erd8825_a25_s | ||
build.config.erd8825_s | ||
build.config.erd9925_evt0_s | ||
build.config.erd9925_evt0_s5300_s | ||
build.config.erd9925_s | ||
build.config.gki | ||
build.config.gki-debug.aarch64 | ||
build.config.gki-debug.x86_64 | ||
build.config.gki.aarch64 | ||
build.config.gki.aarch64.fips140 | ||
build.config.gki.aarch64.fips140_eval_testing | ||
build.config.gki.x86_64 | ||
build.config.gki_kasan | ||
build.config.gki_kasan.aarch64 | ||
build.config.gki_kasan.x86_64 | ||
build.config.gki_kprobes | ||
build.config.gki_kprobes.aarch64 | ||
build.config.gki_kprobes.x86_64 | ||
build.config.hikey960 | ||
build.config.khwasan | ||
build.config.mcd | ||
build.config.rockchip | ||
build.config.universal2100_s | ||
build.config.universal8825_s | ||
build.config.universal9925_evt0_s | ||
build.config.universal9925_s | ||
build.config.x86_64 | ||
build.sh | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
linux-stable.sh | ||
MAINTAINERS | ||
Makefile | ||
OWNERS | ||
README | ||
README.md | ||
vendor_boot_module_order_exynos2100.cfg | ||
vendor_boot_module_order_s5e8825.cfg | ||
vendor_boot_module_order_s5e9925.cfg | ||
vendor_module_list_s5e8825.cfg | ||
vendor_module_list_s5e9925.cfg | ||
vendor_module_list_s5e9925_b0s.cfg | ||
vendor_module_list_s5e9925_g0s.cfg | ||
vendor_module_list_s5e9925_r0s.cfg |
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()
require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
script/checkpatch.pl
- Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:
,BACKPORT:
,FROMGIT:
,FROMLIST:
, orANDROID:
. - All patches must have a
Change-Id:
tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:
tag. - All patches must have a
Signed-off-by:
tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:
, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:
. - add upstream commit information with a
(cherry picked from commit ...)
line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:
instead ofUPSTREAM:
.- use the same tags as
UPSTREAM:
- add comments about the changes under the
(cherry picked from commit ...)
line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:
, FROMLIST:
,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT:
- add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>)
. This must be a stable maintainer branch (not rebased, so don't uselinux-next
for example). - if changes were required, use
BACKPORT: FROMGIT:
- Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST:
- add a
Link:
tag with a link to the submittal on lore.kernel.org - add a
Bug:
tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST:
- Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID:
- add a
Fixes:
tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID:
- add a
Bug:
tag with the Android bug (required for android-specific features)
- tag the patch subject with