FireAsf 🔥
8ac36e7ed3
[ Upstream commit be4edd1642ee205ed7bbf66edc0453b1be1fb8d7 ] Syzbot report potential ABBA deadlock as below: loop0: detected capacity change from 0 to 1024 ====================================================== WARNING: possible circular locking dependency detected 6.9.0-syzkaller-10323-g8f6a15f095a6 #0 Not tainted ------------------------------------------------------ syz-executor171/5344 is trying to acquire lock: ffff88807cb980b0 (&tree->tree_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 but task is already holding lock: ffff88807a930108 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x2da/0xb50 fs/hfsplus/extents.c:576 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_extend+0x21b/0x1b70 fs/hfsplus/extents.c:457 hfsplus_bmap_reserve+0x105/0x4e0 fs/hfsplus/btree.c:358 hfsplus_rename_cat+0x1d0/0x1050 fs/hfsplus/catalog.c:456 hfsplus_rename+0x12e/0x1c0 fs/hfsplus/dir.c:552 vfs_rename+0xbdb/0xf00 fs/namei.c:4887 do_renameat2+0xd94/0x13f0 fs/namei.c:5044 __do_sys_rename fs/namei.c:5091 [inline] __se_sys_rename fs/namei.c:5089 [inline] __x64_sys_rename+0x86/0xa0 fs/namei.c:5089 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&tree->tree_lock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 hfsplus_setattr+0x1ce/0x280 fs/hfsplus/inode.c:265 notify_change+0xb9d/0xe70 fs/attr.c:497 do_truncate+0x220/0x310 fs/open.c:65 handle_truncate fs/namei.c:3308 [inline] do_open fs/namei.c:3654 [inline] path_openat+0x2a3d/0x3280 fs/namei.c:3807 do_filp_open+0x235/0x490 fs/namei.c:3834 do_sys_openat2+0x13e/0x1d0 fs/open.c:1406 do_sys_open fs/open.c:1421 [inline] __do_sys_creat fs/open.c:1497 [inline] __se_sys_creat fs/open.c:1491 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1491 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); This is a false alarm as tree_lock mutex are different, one is from sbi->cat_tree, and another is from sbi->ext_tree: Thread A Thread B - hfsplus_rename - hfsplus_rename_cat - hfs_find_init - mutext_lock(cat_tree->tree_lock) - hfsplus_setattr - hfsplus_file_truncate - mutex_lock(hip->extents_lock) - hfs_find_init - mutext_lock(ext_tree->tree_lock) - hfs_bmap_reserve - hfsplus_file_extend - mutex_lock(hip->extents_lock) So, let's call mutex_lock_nested for tree_lock mutex lock, and pass correct lock class for it. Fixes: 31651c607151 ("hfsplus: avoid deadlock on file truncation") Reported-by: syzbot+6030b3b1b9bf70e538c4@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-fsdevel/000000000000e37a4005ef129563@google.com Cc: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20240607142304.455441-1-chao@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
---|---|---|
.github/workflows | ||
android | ||
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
firmware/tsp_goodix | ||
fs | ||
gki | ||
include | ||
init | ||
io_uring | ||
ipc | ||
kernel | ||
kernel_build | ||
KernelSU@b766b98513 | ||
kunitconfigs | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
test | ||
tools | ||
usr | ||
virt | ||
build.config.aarch64 | ||
build.config.allmodconfig | ||
build.config.allmodconfig.aarch64 | ||
build.config.allmodconfig.arm | ||
build.config.allmodconfig.x86_64 | ||
build.config.amlogic | ||
build.config.arm | ||
build.config.common | ||
build.config.db845c | ||
build.config.erd8825_a25_s | ||
build.config.erd8825_s | ||
build.config.erd9925_evt0_s | ||
build.config.erd9925_evt0_s5300_s | ||
build.config.erd9925_s | ||
build.config.gki | ||
build.config.gki-debug.aarch64 | ||
build.config.gki-debug.x86_64 | ||
build.config.gki.aarch64 | ||
build.config.gki.aarch64.fips140 | ||
build.config.gki.aarch64.fips140_eval_testing | ||
build.config.gki.x86_64 | ||
build.config.gki_kasan | ||
build.config.gki_kasan.aarch64 | ||
build.config.gki_kasan.x86_64 | ||
build.config.gki_kprobes | ||
build.config.gki_kprobes.aarch64 | ||
build.config.gki_kprobes.x86_64 | ||
build.config.hikey960 | ||
build.config.khwasan | ||
build.config.mcd | ||
build.config.rockchip | ||
build.config.universal2100_s | ||
build.config.universal8825_s | ||
build.config.universal9925_evt0_s | ||
build.config.universal9925_s | ||
build.config.x86_64 | ||
build.sh | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
linux-stable.sh | ||
MAINTAINERS | ||
Makefile | ||
OWNERS | ||
README | ||
README.md | ||
vendor_boot_module_order_exynos2100.cfg | ||
vendor_boot_module_order_s5e8825.cfg | ||
vendor_boot_module_order_s5e9925.cfg | ||
vendor_module_list_s5e8825.cfg | ||
vendor_module_list_s5e9925.cfg | ||
vendor_module_list_s5e9925_b0s.cfg | ||
vendor_module_list_s5e9925_g0s.cfg | ||
vendor_module_list_s5e9925_r0s.cfg |
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()
require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
script/checkpatch.pl
- Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:
,BACKPORT:
,FROMGIT:
,FROMLIST:
, orANDROID:
. - All patches must have a
Change-Id:
tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:
tag. - All patches must have a
Signed-off-by:
tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:
, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:
. - add upstream commit information with a
(cherry picked from commit ...)
line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:
instead ofUPSTREAM:
.- use the same tags as
UPSTREAM:
- add comments about the changes under the
(cherry picked from commit ...)
line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:
, FROMLIST:
,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT:
- add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>)
. This must be a stable maintainer branch (not rebased, so don't uselinux-next
for example). - if changes were required, use
BACKPORT: FROMGIT:
- Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST:
- add a
Link:
tag with a link to the submittal on lore.kernel.org - add a
Bug:
tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST:
- Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID:
- add a
Fixes:
tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID:
- add a
Bug:
tag with the Android bug (required for android-specific features)
- tag the patch subject with