150 lines
4.3 KiB
Text
Executable file
150 lines
4.3 KiB
Text
Executable file
Qualcomm adreno/snapdragon GPU
|
|
|
|
Required properties:
|
|
- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
|
|
"amd,imageon-XYZ.W", "amd,imageon"
|
|
for example: "qcom,adreno-306.0", "qcom,adreno"
|
|
Note that you need to list the less specific "qcom,adreno" (since this
|
|
is what the device is matched on), in addition to the more specific
|
|
with the chip-id.
|
|
If "amd,imageon" is used, there should be no top level msm device.
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- interrupts: The interrupt signal from the gpu.
|
|
- clocks: device clocks (if applicable)
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: the following clocks are required by a3xx, a4xx and a5xx
|
|
cores:
|
|
* "core"
|
|
* "iface"
|
|
* "mem_iface"
|
|
For GMU attached devices the GPU clocks are not used and are not required. The
|
|
following devices should not list clocks:
|
|
- qcom,adreno-630.2
|
|
- iommus: optional phandle to an adreno iommu instance
|
|
- operating-points-v2: optional phandle to the OPP operating points
|
|
- interconnects: optional phandle to an interconnect provider. See
|
|
../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
|
|
will have two paths; all others will have one path.
|
|
- interconnect-names: The names of the interconnect paths that correspond to the
|
|
interconnects property. Values must be gfx-mem and ocmem.
|
|
- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
|
|
control the power for the GPU. Applicable targets:
|
|
- qcom,adreno-630.2
|
|
- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
|
|
points to reserved memory to store the zap shader that can be used to help
|
|
bring the GPU out of secure mode.
|
|
- firmware-name: optional property of the 'zap-shader' node, listing the
|
|
relative path of the device specific zap firmware.
|
|
- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
|
|
a4xx Snapdragon SoCs. See
|
|
Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
|
|
|
|
Example 3xx/4xx:
|
|
|
|
/ {
|
|
...
|
|
|
|
gpu: adreno@fdb00000 {
|
|
compatible = "qcom,adreno-330.2",
|
|
"qcom,adreno";
|
|
reg = <0xfdb00000 0x10000>;
|
|
reg-names = "kgsl_3d0_reg_memory";
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "kgsl_3d0_irq";
|
|
clock-names = "core",
|
|
"iface",
|
|
"mem_iface";
|
|
clocks = <&mmcc OXILI_GFX3D_CLK>,
|
|
<&mmcc OXILICX_AHB_CLK>,
|
|
<&mmcc OXILICX_AXI_CLK>;
|
|
sram = <&gpu_sram>;
|
|
power-domains = <&mmcc OXILICX_GDSC>;
|
|
operating-points-v2 = <&gpu_opp_table>;
|
|
iommus = <&gpu_iommu 0>;
|
|
};
|
|
|
|
gpu_sram: ocmem@fdd00000 {
|
|
compatible = "qcom,msm8974-ocmem";
|
|
|
|
reg = <0xfdd00000 0x2000>,
|
|
<0xfec00000 0x180000>;
|
|
reg-names = "ctrl",
|
|
"mem";
|
|
|
|
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
|
|
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
|
|
clock-names = "core",
|
|
"iface";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
gpu_sram: gpu-sram@0 {
|
|
reg = <0x0 0x100000>;
|
|
ranges = <0 0 0xfec00000 0x100000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example a6xx (with GMU):
|
|
|
|
/ {
|
|
...
|
|
|
|
gpu@5000000 {
|
|
compatible = "qcom,adreno-630.2", "qcom,adreno";
|
|
#stream-id-cells = <16>;
|
|
|
|
reg = <0x5000000 0x40000>, <0x509e000 0x10>;
|
|
reg-names = "kgsl_3d0_reg_memory", "cx_mem";
|
|
|
|
/*
|
|
* Look ma, no clocks! The GPU clocks and power are
|
|
* controlled entirely by the GMU
|
|
*/
|
|
|
|
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
iommus = <&adreno_smmu 0>;
|
|
|
|
operating-points-v2 = <&gpu_opp_table>;
|
|
|
|
interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
|
|
interconnect-names = "gfx-mem";
|
|
|
|
gpu_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-430000000 {
|
|
opp-hz = /bits/ 64 <430000000>;
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
|
opp-peak-kBps = <5412000>;
|
|
};
|
|
|
|
opp-355000000 {
|
|
opp-hz = /bits/ 64 <355000000>;
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
|
opp-peak-kBps = <3072000>;
|
|
};
|
|
|
|
opp-267000000 {
|
|
opp-hz = /bits/ 64 <267000000>;
|
|
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
|
opp-peak-kBps = <3072000>;
|
|
};
|
|
|
|
opp-180000000 {
|
|
opp-hz = /bits/ 64 <180000000>;
|
|
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
|
opp-peak-kBps = <1804000>;
|
|
};
|
|
};
|
|
|
|
qcom,gmu = <&gmu>;
|
|
|
|
zap-shader {
|
|
memory-region = <&zap_shader_region>;
|
|
firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
|
|
};
|
|
};
|
|
};
|