FireAsf 🔥
6cbe4c4b4e
[ Upstream commit 0feda94c868d396fac3b3cb14089d2d989a07c72 ] On many systems that have an AMD IOMMU the following sequence of warnings is observed during bootup. ``` pci 0000:00:00.2 can't derive routing for PCI INT A pci 0000:00:00.2: PCI INT A: not connected ``` This series of events happens because of the IOMMU initialization sequence order and the lack of _PRT entries for the IOMMU. During initialization the IOMMU driver first enables the PCI device using pci_enable_device(). This will call acpi_pci_irq_enable() which will check if the interrupt is declared in a PCI routing table (_PRT) entry. According to the PCI spec [1] these routing entries are only required under PCI root bridges: The _PRT object is required under all PCI root bridges The IOMMU is directly connected to the root complex, so there is no parent bridge to look for a _PRT entry. The first warning is emitted since no entry could be found in the hierarchy. The second warning is then emitted because the interrupt hasn't yet been configured to any value. The pin was configured in pci_read_irq() but the byte in PCI_INTERRUPT_LINE return 0xff which means "Unknown". After that sequence of events pci_enable_msi() is called and this will allocate an interrupt. That is both of these warnings are totally harmless because the IOMMU uses MSI for interrupts. To avoid even trying to probe for a _PRT entry mark the IOMMU as IRQ managed. This avoids both warnings. Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Fixes: cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count") Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
---|---|---|
.github/workflows | ||
android | ||
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
firmware/tsp_goodix | ||
fs | ||
gki | ||
include | ||
init | ||
io_uring | ||
ipc | ||
kernel | ||
kernel_build | ||
kunitconfigs | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
test | ||
tools | ||
usr | ||
virt | ||
build.config.aarch64 | ||
build.config.allmodconfig | ||
build.config.allmodconfig.aarch64 | ||
build.config.allmodconfig.arm | ||
build.config.allmodconfig.x86_64 | ||
build.config.amlogic | ||
build.config.arm | ||
build.config.common | ||
build.config.db845c | ||
build.config.erd8825_a25_s | ||
build.config.erd8825_s | ||
build.config.erd9925_evt0_s | ||
build.config.erd9925_evt0_s5300_s | ||
build.config.erd9925_s | ||
build.config.gki | ||
build.config.gki-debug.aarch64 | ||
build.config.gki-debug.x86_64 | ||
build.config.gki.aarch64 | ||
build.config.gki.aarch64.fips140 | ||
build.config.gki.aarch64.fips140_eval_testing | ||
build.config.gki.x86_64 | ||
build.config.gki_kasan | ||
build.config.gki_kasan.aarch64 | ||
build.config.gki_kasan.x86_64 | ||
build.config.gki_kprobes | ||
build.config.gki_kprobes.aarch64 | ||
build.config.gki_kprobes.x86_64 | ||
build.config.hikey960 | ||
build.config.khwasan | ||
build.config.mcd | ||
build.config.rockchip | ||
build.config.universal2100_s | ||
build.config.universal8825_s | ||
build.config.universal9925_evt0_s | ||
build.config.universal9925_s | ||
build.config.x86_64 | ||
build.sh | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
linux-stable.sh | ||
MAINTAINERS | ||
Makefile | ||
OWNERS | ||
README | ||
README.md | ||
vendor_boot_module_order_exynos2100.cfg | ||
vendor_boot_module_order_s5e8825.cfg | ||
vendor_boot_module_order_s5e9925.cfg | ||
vendor_module_list_s5e8825.cfg | ||
vendor_module_list_s5e9925.cfg | ||
vendor_module_list_s5e9925_b0s.cfg | ||
vendor_module_list_s5e9925_g0s.cfg | ||
vendor_module_list_s5e9925_r0s.cfg |
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()
require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
script/checkpatch.pl
- Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:
,BACKPORT:
,FROMGIT:
,FROMLIST:
, orANDROID:
. - All patches must have a
Change-Id:
tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:
tag. - All patches must have a
Signed-off-by:
tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:
, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:
. - add upstream commit information with a
(cherry picked from commit ...)
line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:
instead ofUPSTREAM:
.- use the same tags as
UPSTREAM:
- add comments about the changes under the
(cherry picked from commit ...)
line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:
, FROMLIST:
,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT:
- add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>)
. This must be a stable maintainer branch (not rebased, so don't uselinux-next
for example). - if changes were required, use
BACKPORT: FROMGIT:
- Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST:
- add a
Link:
tag with a link to the submittal on lore.kernel.org - add a
Bug:
tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST:
- Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID:
- add a
Fixes:
tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID:
- add a
Bug:
tag with the Android bug (required for android-specific features)
- tag the patch subject with