FireAsf 🔥
![]() commit 8d9ffb2fe65a6c4ef114e8d4f947958a12751bbe upstream. The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled. Debugging traced the issue back to b69a2afd5afc ("x86/kexec: Carry forward IMA measurement log on kexec"). Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC enabled, which led to the oversight, with the following incarnation: ... ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656' ima: Allocated hash algorithm: sha256 Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ #14 Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023 RIP: 0010:ima_restore_measurement_list Call Trace: <TASK> ? show_trace_log_lvl ? show_trace_log_lvl ? ima_load_kexec_buffer ? __die_body.cold ? die_addr ? exc_general_protection ? asm_exc_general_protection ? ima_restore_measurement_list ? vprintk_emit ? ima_load_kexec_buffer ima_load_kexec_buffer ima_init ? __pfx_init_ima init_ima ? __pfx_init_ima do_one_initcall do_initcalls ? __pfx_kernel_init kernel_init_freeable kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Rebooting in 10 seconds.. Adding debug printks showed that the stored addr and size of ima_kexec buffer are not decrypted correctly like: ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359 Three types of setup_data info — SETUP_EFI, - SETUP_IMA, and - SETUP_RNG_SEED are passed to the kexec/kdump kernel. Only the ima_kexec buffer experienced incorrect decryption. Debugging identified a bug in early_memremap_is_setup_data(), where an incorrect range calculation occurred due to the len variable in struct setup_data ended up only representing the length of the data field, excluding the struct's size, and thus leading to miscalculation. Address a similar issue in memremap_is_setup_data() while at it. [ bp: Heavily massage. ] Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect") Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240911081615.262202-3-bhe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
---|---|---|
.github/workflows | ||
android | ||
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
firmware/tsp_goodix | ||
fs | ||
gki | ||
include | ||
init | ||
io_uring | ||
ipc | ||
kernel | ||
kernel_build | ||
KernelSU@b766b98513 | ||
kunitconfigs | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
test | ||
tools | ||
usr | ||
virt | ||
build.config.aarch64 | ||
build.config.allmodconfig | ||
build.config.allmodconfig.aarch64 | ||
build.config.allmodconfig.arm | ||
build.config.allmodconfig.x86_64 | ||
build.config.amlogic | ||
build.config.arm | ||
build.config.common | ||
build.config.db845c | ||
build.config.erd8825_a25_s | ||
build.config.erd8825_s | ||
build.config.erd9925_evt0_s | ||
build.config.erd9925_evt0_s5300_s | ||
build.config.erd9925_s | ||
build.config.gki | ||
build.config.gki-debug.aarch64 | ||
build.config.gki-debug.x86_64 | ||
build.config.gki.aarch64 | ||
build.config.gki.aarch64.fips140 | ||
build.config.gki.aarch64.fips140_eval_testing | ||
build.config.gki.x86_64 | ||
build.config.gki_kasan | ||
build.config.gki_kasan.aarch64 | ||
build.config.gki_kasan.x86_64 | ||
build.config.gki_kprobes | ||
build.config.gki_kprobes.aarch64 | ||
build.config.gki_kprobes.x86_64 | ||
build.config.hikey960 | ||
build.config.khwasan | ||
build.config.mcd | ||
build.config.rockchip | ||
build.config.universal2100_s | ||
build.config.universal8825_s | ||
build.config.universal9925_evt0_s | ||
build.config.universal9925_s | ||
build.config.x86_64 | ||
build.sh | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
linux-stable.sh | ||
MAINTAINERS | ||
Makefile | ||
OWNERS | ||
README | ||
README.md | ||
vendor_boot_module_order_exynos2100.cfg | ||
vendor_boot_module_order_s5e8825.cfg | ||
vendor_boot_module_order_s5e9925.cfg | ||
vendor_module_list_s5e8825.cfg | ||
vendor_module_list_s5e9925.cfg | ||
vendor_module_list_s5e9925_b0s.cfg | ||
vendor_module_list_s5e9925_g0s.cfg | ||
vendor_module_list_s5e9925_r0s.cfg |
How do I submit patches to Android Common Kernels
-
BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
EXPORT_SYMBOL_GPL()
require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export. - When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
- Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux,
additions of
-
LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.
Common Kernel patch requirements
- All patches must conform to the Linux kernel coding standards and pass
script/checkpatch.pl
- Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
- If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch:
UPSTREAM:
,BACKPORT:
,FROMGIT:
,FROMLIST:
, orANDROID:
. - All patches must have a
Change-Id:
tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html) - If an Android bug has been assigned, there must be a
Bug:
tag. - All patches must have a
Signed-off-by:
tag by the author and the submitter
Additional requirements are listed below based on patch type
Requirements for backports from mainline Linux: UPSTREAM:
, BACKPORT:
- If the patch is a cherry-pick from Linux mainline with no changes at all
- tag the patch subject with
UPSTREAM:
. - add upstream commit information with a
(cherry picked from commit ...)
line - Example:
- if the upstream commit message is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
UPSTREAM: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch requires any changes from the upstream version, tag the patch with
BACKPORT:
instead ofUPSTREAM:
.- use the same tags as
UPSTREAM:
- add comments about the changes under the
(cherry picked from commit ...)
line - Example:
- use the same tags as
BACKPORT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
(cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
[joe: Resolved minor conflict in drivers/foo/bar.c ]
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for other backports: FROMGIT:
, FROMLIST:
,
- If the patch has been merged into an upstream maintainer tree, but has not yet
been merged into Linux mainline
- tag the patch subject with
FROMGIT:
- add info on where the patch came from as
(cherry picked from commit <sha1> <repo> <branch>)
. This must be a stable maintainer branch (not rebased, so don't uselinux-next
for example). - if changes were required, use
BACKPORT: FROMGIT:
- Example:
- if the commit message in the maintainer tree is
- tag the patch subject with
important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
- then Joe Smith would upload the patch for the common kernel as
FROMGIT: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
(cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch has been submitted to LKML, but not accepted into any maintainer tree
- tag the patch subject with
FROMLIST:
- add a
Link:
tag with a link to the submittal on lore.kernel.org - add a
Bug:
tag with the Android bug (required for patches not accepted into a maintainer tree) - if changes were required, use
BACKPORT: FROMLIST:
- Example:
- tag the patch subject with
FROMLIST: important patch from upstream
This is the detailed description of the important patch
Signed-off-by: Fred Jones <fred.jones@foo.org>
Bug: 135791357
Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
Requirements for Android-specific patches: ANDROID:
- If the patch is fixing a bug to Android-specific code
- tag the patch subject with
ANDROID:
- add a
Fixes:
tag that cites the patch with the bug - Example:
- tag the patch subject with
ANDROID: fix android-specific bug in foobar.c
This is the detailed description of the important fix
Fixes: 1234abcd2468 ("foobar: add cool feature")
Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
Signed-off-by: Joe Smith <joe.smith@foo.org>
- If the patch is a new feature
- tag the patch subject with
ANDROID:
- add a
Bug:
tag with the Android bug (required for android-specific features)
- tag the patch subject with