bd21dceefe
commit 7e09ac27f43b382f5fe9bb7c7f4c465ece1f8a23 upstream. Commit in Fixes added the "NOLOAD" attribute to the .brk section as a "failsafe" measure. Unfortunately, this leads to the linker no longer covering the .brk section in a program header, resulting in the kernel loader not knowing that the memory for the .brk section must be reserved. This has led to crashes when loading the kernel as PV dom0 under Xen, but other scenarios could be hit by the same problem (e.g. in case an uncompressed kernel is used and the initrd is placed directly behind it). So drop the "NOLOAD" attribute. This has been verified to correctly cover the .brk section by a program header of the resulting ELF file. Fixes: e32683c6f7d2 ("x86/mm: Fix RESERVE_BRK() for older binutils") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20220630071441.28576-4-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
553 lines
14 KiB
ArmAsm
Executable file
553 lines
14 KiB
ArmAsm
Executable file
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* ld script for the x86 kernel
|
|
*
|
|
* Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
|
|
*
|
|
* Modernisation, unification and other changes and fixes:
|
|
* Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
|
|
*
|
|
*
|
|
* Don't define absolute symbols until and unless you know that symbol
|
|
* value is should remain constant even if kernel image is relocated
|
|
* at run time. Absolute symbols are not relocated. If symbol value should
|
|
* change if kernel is relocated, make the symbol section relative and
|
|
* put it inside the section definition.
|
|
*/
|
|
|
|
#ifdef CONFIG_X86_32
|
|
#define LOAD_OFFSET __PAGE_OFFSET
|
|
#else
|
|
#define LOAD_OFFSET __START_KERNEL_map
|
|
#endif
|
|
|
|
#define RUNTIME_DISCARD_EXIT
|
|
#define EMITS_PT_NOTE
|
|
#define RO_EXCEPTION_TABLE_ALIGN 16
|
|
|
|
#include <asm-generic/vmlinux.lds.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page_types.h>
|
|
#include <asm/orc_lookup.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/boot.h>
|
|
|
|
#undef i386 /* in case the preprocessor is a 32bit one */
|
|
|
|
OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT)
|
|
|
|
#ifdef CONFIG_X86_32
|
|
OUTPUT_ARCH(i386)
|
|
ENTRY(phys_startup_32)
|
|
#else
|
|
OUTPUT_ARCH(i386:x86-64)
|
|
ENTRY(phys_startup_64)
|
|
#endif
|
|
|
|
jiffies = jiffies_64;
|
|
|
|
#if defined(CONFIG_X86_64)
|
|
/*
|
|
* On 64-bit, align RODATA to 2MB so we retain large page mappings for
|
|
* boundaries spanning kernel text, rodata and data sections.
|
|
*
|
|
* However, kernel identity mappings will have different RWX permissions
|
|
* to the pages mapping to text and to the pages padding (which are freed) the
|
|
* text section. Hence kernel identity mappings will be broken to smaller
|
|
* pages. For 64-bit, kernel text and kernel identity mappings are different,
|
|
* so we can enable protection checks as well as retain 2MB large page
|
|
* mappings for kernel text.
|
|
*/
|
|
#define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE);
|
|
|
|
#define X86_ALIGN_RODATA_END \
|
|
. = ALIGN(HPAGE_SIZE); \
|
|
__end_rodata_hpage_align = .; \
|
|
__end_rodata_aligned = .;
|
|
|
|
#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE);
|
|
#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE);
|
|
|
|
/*
|
|
* This section contains data which will be mapped as decrypted. Memory
|
|
* encryption operates on a page basis. Make this section PMD-aligned
|
|
* to avoid splitting the pages while mapping the section early.
|
|
*
|
|
* Note: We use a separate section so that only this section gets
|
|
* decrypted to avoid exposing more than we wish.
|
|
*/
|
|
#define BSS_DECRYPTED \
|
|
. = ALIGN(PMD_SIZE); \
|
|
__start_bss_decrypted = .; \
|
|
*(.bss..decrypted); \
|
|
. = ALIGN(PAGE_SIZE); \
|
|
__start_bss_decrypted_unused = .; \
|
|
. = ALIGN(PMD_SIZE); \
|
|
__end_bss_decrypted = .; \
|
|
|
|
#else
|
|
|
|
#define X86_ALIGN_RODATA_BEGIN
|
|
#define X86_ALIGN_RODATA_END \
|
|
. = ALIGN(PAGE_SIZE); \
|
|
__end_rodata_aligned = .;
|
|
|
|
#define ALIGN_ENTRY_TEXT_BEGIN
|
|
#define ALIGN_ENTRY_TEXT_END
|
|
#define BSS_DECRYPTED
|
|
|
|
#endif
|
|
|
|
PHDRS {
|
|
text PT_LOAD FLAGS(5); /* R_E */
|
|
data PT_LOAD FLAGS(6); /* RW_ */
|
|
#ifdef CONFIG_X86_64
|
|
#ifdef CONFIG_SMP
|
|
percpu PT_LOAD FLAGS(6); /* RW_ */
|
|
#endif
|
|
init PT_LOAD FLAGS(7); /* RWE */
|
|
#endif
|
|
note PT_NOTE FLAGS(0); /* ___ */
|
|
}
|
|
|
|
SECTIONS
|
|
{
|
|
#ifdef CONFIG_X86_32
|
|
. = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
|
|
phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
|
|
#else
|
|
. = __START_KERNEL;
|
|
phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
|
|
#endif
|
|
|
|
/* Text and read-only data */
|
|
.text : AT(ADDR(.text) - LOAD_OFFSET) {
|
|
_text = .;
|
|
_stext = .;
|
|
/* bootstrapping code */
|
|
HEAD_TEXT
|
|
TEXT_TEXT
|
|
SCHED_TEXT
|
|
CPUIDLE_TEXT
|
|
LOCK_TEXT
|
|
KPROBES_TEXT
|
|
ALIGN_ENTRY_TEXT_BEGIN
|
|
#ifdef CONFIG_CPU_SRSO
|
|
*(.text..__x86.rethunk_untrain)
|
|
#endif
|
|
|
|
ENTRY_TEXT
|
|
|
|
#ifdef CONFIG_CPU_SRSO
|
|
/*
|
|
* See the comment above srso_alias_untrain_ret()'s
|
|
* definition.
|
|
*/
|
|
. = srso_alias_untrain_ret | (1 << 2) | (1 << 8) | (1 << 14) | (1 << 20);
|
|
*(.text..__x86.rethunk_safe)
|
|
#endif
|
|
ALIGN_ENTRY_TEXT_END
|
|
SOFTIRQENTRY_TEXT
|
|
STATIC_CALL_TEXT
|
|
*(.fixup)
|
|
*(.gnu.warning)
|
|
|
|
#ifdef CONFIG_RETPOLINE
|
|
__indirect_thunk_start = .;
|
|
*(.text..__x86.indirect_thunk)
|
|
*(.text..__x86.return_thunk)
|
|
__indirect_thunk_end = .;
|
|
#endif
|
|
} :text =0xcccc
|
|
|
|
/* End of text section, which should occupy whole number of pages */
|
|
_etext = .;
|
|
|
|
. = ALIGN(PAGE_SIZE);
|
|
|
|
X86_ALIGN_RODATA_BEGIN
|
|
RO_DATA(PAGE_SIZE)
|
|
X86_ALIGN_RODATA_END
|
|
|
|
/* Data */
|
|
.data : AT(ADDR(.data) - LOAD_OFFSET) {
|
|
/* Start of data section */
|
|
_sdata = .;
|
|
|
|
/* init_task */
|
|
INIT_TASK_DATA(THREAD_SIZE)
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/* 32 bit has nosave before _edata */
|
|
NOSAVE_DATA
|
|
#endif
|
|
|
|
PAGE_ALIGNED_DATA(PAGE_SIZE)
|
|
|
|
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
|
|
|
|
DATA_DATA
|
|
CONSTRUCTORS
|
|
|
|
/* rarely changed data like cpu maps */
|
|
READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
|
|
|
|
/* End of data section */
|
|
_edata = .;
|
|
} :data
|
|
|
|
BUG_TABLE
|
|
|
|
ORC_UNWIND_TABLE
|
|
|
|
. = ALIGN(PAGE_SIZE);
|
|
__vvar_page = .;
|
|
|
|
.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
|
|
/* work around gold bug 13023 */
|
|
__vvar_beginning_hack = .;
|
|
|
|
/* Place all vvars at the offsets in asm/vvar.h. */
|
|
#define EMIT_VVAR(name, offset) \
|
|
. = __vvar_beginning_hack + offset; \
|
|
*(.vvar_ ## name)
|
|
#include <asm/vvar.h>
|
|
#undef EMIT_VVAR
|
|
|
|
/*
|
|
* Pad the rest of the page with zeros. Otherwise the loader
|
|
* can leave garbage here.
|
|
*/
|
|
. = __vvar_beginning_hack + PAGE_SIZE;
|
|
} :data
|
|
|
|
. = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
|
|
|
|
/* Init code and data - will be freed after init */
|
|
. = ALIGN(PAGE_SIZE);
|
|
.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
|
|
__init_begin = .; /* paired with __init_end */
|
|
}
|
|
|
|
#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
|
|
/*
|
|
* percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
|
|
* output PHDR, so the next output section - .init.text - should
|
|
* start another segment - init.
|
|
*/
|
|
PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
|
|
ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
|
|
"per-CPU data too large - increase CONFIG_PHYSICAL_START")
|
|
#endif
|
|
|
|
INIT_TEXT_SECTION(PAGE_SIZE)
|
|
#ifdef CONFIG_X86_64
|
|
:init
|
|
#endif
|
|
|
|
/*
|
|
* Section for code used exclusively before alternatives are run. All
|
|
* references to such code must be patched out by alternatives, normally
|
|
* by using X86_FEATURE_ALWAYS CPU feature bit.
|
|
*
|
|
* See static_cpu_has() for an example.
|
|
*/
|
|
.altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
|
|
*(.altinstr_aux)
|
|
}
|
|
|
|
INIT_DATA_SECTION(16)
|
|
|
|
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
|
|
__x86_cpu_dev_start = .;
|
|
*(.x86_cpu_dev.init)
|
|
__x86_cpu_dev_end = .;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_INTEL_MID
|
|
.x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
|
|
LOAD_OFFSET) {
|
|
__x86_intel_mid_dev_start = .;
|
|
*(.x86_intel_mid_dev.init)
|
|
__x86_intel_mid_dev_end = .;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* start address and size of operations which during runtime
|
|
* can be patched with virtualization friendly instructions or
|
|
* baremetal native ones. Think page table operations.
|
|
* Details in paravirt_types.h
|
|
*/
|
|
. = ALIGN(8);
|
|
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
|
|
__parainstructions = .;
|
|
*(.parainstructions)
|
|
__parainstructions_end = .;
|
|
}
|
|
|
|
#ifdef CONFIG_RETPOLINE
|
|
/*
|
|
* List of instructions that call/jmp/jcc to retpoline thunks
|
|
* __x86_indirect_thunk_*(). These instructions can be patched along
|
|
* with alternatives, after which the section can be freed.
|
|
*/
|
|
. = ALIGN(8);
|
|
.retpoline_sites : AT(ADDR(.retpoline_sites) - LOAD_OFFSET) {
|
|
__retpoline_sites = .;
|
|
*(.retpoline_sites)
|
|
__retpoline_sites_end = .;
|
|
}
|
|
|
|
. = ALIGN(8);
|
|
.return_sites : AT(ADDR(.return_sites) - LOAD_OFFSET) {
|
|
__return_sites = .;
|
|
*(.return_sites)
|
|
__return_sites_end = .;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* struct alt_inst entries. From the header (alternative.h):
|
|
* "Alternative instructions for different CPU types or capabilities"
|
|
* Think locking instructions on spinlocks.
|
|
*/
|
|
. = ALIGN(8);
|
|
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
|
|
__alt_instructions = .;
|
|
*(.altinstructions)
|
|
__alt_instructions_end = .;
|
|
}
|
|
|
|
/*
|
|
* And here are the replacement instructions. The linker sticks
|
|
* them as binary blobs. The .altinstructions has enough data to
|
|
* get the address and the length of them to patch the kernel safely.
|
|
*/
|
|
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
|
|
*(.altinstr_replacement)
|
|
}
|
|
|
|
/*
|
|
* struct iommu_table_entry entries are injected in this section.
|
|
* It is an array of IOMMUs which during run time gets sorted depending
|
|
* on its dependency order. After rootfs_initcall is complete
|
|
* this section can be safely removed.
|
|
*/
|
|
.iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
|
|
__iommu_table = .;
|
|
*(.iommu_table)
|
|
__iommu_table_end = .;
|
|
}
|
|
|
|
. = ALIGN(8);
|
|
.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
|
|
__apicdrivers = .;
|
|
*(.apicdrivers);
|
|
__apicdrivers_end = .;
|
|
}
|
|
|
|
. = ALIGN(8);
|
|
/*
|
|
* .exit.text is discarded at runtime, not link time, to deal with
|
|
* references from .altinstructions
|
|
*/
|
|
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
|
|
EXIT_TEXT
|
|
}
|
|
|
|
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
|
|
EXIT_DATA
|
|
}
|
|
|
|
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
|
|
PERCPU_SECTION(INTERNODE_CACHE_BYTES)
|
|
#endif
|
|
|
|
. = ALIGN(PAGE_SIZE);
|
|
|
|
/* freed after init ends here */
|
|
.init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
|
|
__init_end = .;
|
|
}
|
|
|
|
/*
|
|
* smp_locks might be freed after init
|
|
* start/end must be page aligned
|
|
*/
|
|
. = ALIGN(PAGE_SIZE);
|
|
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
|
|
__smp_locks = .;
|
|
*(.smp_locks)
|
|
. = ALIGN(PAGE_SIZE);
|
|
__smp_locks_end = .;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
|
|
NOSAVE_DATA
|
|
}
|
|
#endif
|
|
|
|
/* BSS */
|
|
. = ALIGN(PAGE_SIZE);
|
|
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
|
|
__bss_start = .;
|
|
*(.bss..page_aligned)
|
|
. = ALIGN(PAGE_SIZE);
|
|
*(BSS_MAIN)
|
|
BSS_DECRYPTED
|
|
. = ALIGN(PAGE_SIZE);
|
|
__bss_stop = .;
|
|
}
|
|
|
|
/*
|
|
* The memory occupied from _text to here, __end_of_kernel_reserve, is
|
|
* automatically reserved in setup_arch(). Anything after here must be
|
|
* explicitly reserved using memblock_reserve() or it will be discarded
|
|
* and treated as available memory.
|
|
*/
|
|
__end_of_kernel_reserve = .;
|
|
|
|
. = ALIGN(PAGE_SIZE);
|
|
.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
|
|
__brk_base = .;
|
|
. += 64 * 1024; /* 64k alignment slop space */
|
|
*(.bss..brk) /* areas brk users have reserved */
|
|
__brk_limit = .;
|
|
}
|
|
|
|
. = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
|
|
_end = .;
|
|
|
|
#ifdef CONFIG_AMD_MEM_ENCRYPT
|
|
/*
|
|
* Early scratch/workarea section: Lives outside of the kernel proper
|
|
* (_text - _end).
|
|
*
|
|
* Resides after _end because even though the .brk section is after
|
|
* __end_of_kernel_reserve, the .brk section is later reserved as a
|
|
* part of the kernel. Since it is located after __end_of_kernel_reserve
|
|
* it will be discarded and become part of the available memory. As
|
|
* such, it can only be used by very early boot code and must not be
|
|
* needed afterwards.
|
|
*
|
|
* Currently used by SME for performing in-place encryption of the
|
|
* kernel during boot. Resides on a 2MB boundary to simplify the
|
|
* pagetable setup used for SME in-place encryption.
|
|
*/
|
|
. = ALIGN(HPAGE_SIZE);
|
|
.init.scratch : AT(ADDR(.init.scratch) - LOAD_OFFSET) {
|
|
__init_scratch_begin = .;
|
|
*(.init.scratch)
|
|
. = ALIGN(HPAGE_SIZE);
|
|
__init_scratch_end = .;
|
|
}
|
|
#endif
|
|
|
|
STABS_DEBUG
|
|
DWARF_DEBUG
|
|
ELF_DETAILS
|
|
|
|
DISCARDS
|
|
|
|
/*
|
|
* Make sure that the .got.plt is either completely empty or it
|
|
* contains only the lazy dispatch entries.
|
|
*/
|
|
.got.plt (INFO) : { *(.got.plt) }
|
|
ASSERT(SIZEOF(.got.plt) == 0 ||
|
|
#ifdef CONFIG_X86_64
|
|
SIZEOF(.got.plt) == 0x18,
|
|
#else
|
|
SIZEOF(.got.plt) == 0xc,
|
|
#endif
|
|
"Unexpected GOT/PLT entries detected!")
|
|
|
|
/*
|
|
* Sections that should stay zero sized, which is safer to
|
|
* explicitly check instead of blindly discarding.
|
|
*/
|
|
.got : {
|
|
*(.got) *(.igot.*)
|
|
}
|
|
ASSERT(SIZEOF(.got) == 0, "Unexpected GOT entries detected!")
|
|
|
|
.plt : {
|
|
*(.plt) *(.plt.*) *(.iplt)
|
|
}
|
|
ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!")
|
|
|
|
.rel.dyn : {
|
|
*(.rel.*) *(.rel_*)
|
|
}
|
|
ASSERT(SIZEOF(.rel.dyn) == 0, "Unexpected run-time relocations (.rel) detected!")
|
|
|
|
.rela.dyn : {
|
|
*(.rela.*) *(.rela_*)
|
|
}
|
|
ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!")
|
|
}
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
|
|
*/
|
|
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
|
|
"kernel image bigger than KERNEL_IMAGE_SIZE");
|
|
#else
|
|
/*
|
|
* Per-cpu symbols which need to be offset from __per_cpu_load
|
|
* for the boot processor.
|
|
*/
|
|
#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
|
|
INIT_PER_CPU(gdt_page);
|
|
INIT_PER_CPU(fixed_percpu_data);
|
|
INIT_PER_CPU(irq_stack_backing_store);
|
|
|
|
/*
|
|
* Build-time check on the image size:
|
|
*/
|
|
. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
|
|
"kernel image bigger than KERNEL_IMAGE_SIZE");
|
|
|
|
#ifdef CONFIG_SMP
|
|
. = ASSERT((fixed_percpu_data == 0),
|
|
"fixed_percpu_data is not at start of per-cpu area");
|
|
#endif
|
|
|
|
#ifdef CONFIG_RETHUNK
|
|
. = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned");
|
|
. = ASSERT((srso_safe_ret & 0x3f) == 0, "srso_safe_ret not cacheline-aligned");
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPU_SRSO
|
|
/*
|
|
* GNU ld cannot do XOR until 2.41.
|
|
* https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f6f78318fca803c4907fb8d7f6ded8295f1947b1
|
|
*
|
|
* LLVM lld cannot do XOR until lld-17.
|
|
* https://github.com/llvm/llvm-project/commit/fae96104d4378166cbe5c875ef8ed808a356f3fb
|
|
*
|
|
* Instead do: (A | B) - (A & B) in order to compute the XOR
|
|
* of the two function addresses:
|
|
*/
|
|
. = ASSERT(((ABSOLUTE(srso_alias_untrain_ret) | srso_alias_safe_ret) -
|
|
(ABSOLUTE(srso_alias_untrain_ret) & srso_alias_safe_ret)) == ((1 << 2) | (1 << 8) | (1 << 14) | (1 << 20)),
|
|
"SRSO function pair won't alias");
|
|
#endif
|
|
|
|
#endif /* CONFIG_X86_32 */
|
|
|
|
#ifdef CONFIG_KEXEC_CORE
|
|
#include <asm/kexec.h>
|
|
|
|
. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
|
|
"kexec control code size is too big");
|
|
#endif
|
|
|
|
#ifdef CONFIG_CFI_CLANG
|
|
. = ASSERT((__cfi_jt_end - __cfi_jt_start > 0),
|
|
"CFI jump table is empty");
|
|
#endif
|