FireAsf 🔥
Find a file
Ville Syrjälä 1dd997e076 wifi: iwlegacy: Clear stale interrupts before resuming device
commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream.

iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.

Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.

Here's a debug log of the indicent:
[   12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[   12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[   12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[   12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[   12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[   12.052207] ieee80211 phy0: il4965_mac_start enter
[   12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[   12.052244] ieee80211 phy0: il4965_set_hw_ready hardware  ready
[   12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[   12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[   12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[   12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[   12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[   12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[   12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[   12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[   12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[   12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[   12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[   12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[   12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[   12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[   12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[   12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[   12.058869] ieee80211 phy0: Hardware restart was requested
[   16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[   16.132303] ------------[ cut here ]------------
[   16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[   16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[   16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.132463] Workqueue: async async_run_entry_fn
[   16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[   16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[   16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[   16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[   16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[   16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[   16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[   16.132515] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.132517] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.132521] Call Trace:
[   16.132525]  <TASK>
[   16.132526]  ? __warn+0x77/0x120
[   16.132532]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132564]  ? report_bug+0x15c/0x190
[   16.132568]  ? handle_bug+0x36/0x70
[   16.132571]  ? exc_invalid_op+0x13/0x60
[   16.132573]  ? asm_exc_invalid_op+0x16/0x20
[   16.132579]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132611]  ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[   16.132617]  ? pick_eevdf+0x133/0x1c0
[   16.132622]  ? check_preempt_wakeup_fair+0x70/0x90
[   16.132626]  ? wakeup_preempt+0x4a/0x60
[   16.132628]  ? ttwu_do_activate.isra.0+0x5a/0x190
[   16.132632]  wiphy_resume+0x79/0x1a0 [cfg80211]
[   16.132675]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.132697]  dpm_run_callback+0x75/0x1b0
[   16.132703]  device_resume+0x97/0x200
[   16.132707]  async_resume+0x14/0x20
[   16.132711]  async_run_entry_fn+0x1b/0xa0
[   16.132714]  process_one_work+0x13d/0x350
[   16.132718]  worker_thread+0x2be/0x3d0
[   16.132722]  ? cancel_delayed_work_sync+0x70/0x70
[   16.132725]  kthread+0xc0/0xf0
[   16.132729]  ? kthread_park+0x80/0x80
[   16.132732]  ret_from_fork+0x28/0x40
[   16.132735]  ? kthread_park+0x80/0x80
[   16.132738]  ret_from_fork_asm+0x11/0x20
[   16.132741]  </TASK>
[   16.132742] ---[ end trace 0000000000000000 ]---
[   16.132930] ------------[ cut here ]------------
[   16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[   16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G        W          6.11.0-cl+ #143
[   16.133018] Tainted: [W]=WARN
[   16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.133021] Workqueue: async async_run_entry_fn
[   16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[   16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[   16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[   16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[   16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[   16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[   16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[   16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[   16.133061] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.133063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.133067] Call Trace:
[   16.133069]  <TASK>
[   16.133070]  ? __warn+0x77/0x120
[   16.133075]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133098]  ? report_bug+0x15c/0x190
[   16.133100]  ? handle_bug+0x36/0x70
[   16.133103]  ? exc_invalid_op+0x13/0x60
[   16.133105]  ? asm_exc_invalid_op+0x16/0x20
[   16.133109]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133132]  ieee80211_do_stop+0x55a/0x810 [mac80211]
[   16.133161]  ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[   16.133164]  ieee80211_stop+0x4f/0x180 [mac80211]
[   16.133192]  __dev_close_many+0xa2/0x120
[   16.133195]  dev_close_many+0x90/0x150
[   16.133198]  dev_close+0x5d/0x80
[   16.133200]  cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[   16.133223]  wiphy_resume+0xb2/0x1a0 [cfg80211]
[   16.133247]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.133269]  dpm_run_callback+0x75/0x1b0
[   16.133273]  device_resume+0x97/0x200
[   16.133277]  async_resume+0x14/0x20
[   16.133280]  async_run_entry_fn+0x1b/0xa0
[   16.133283]  process_one_work+0x13d/0x350
[   16.133287]  worker_thread+0x2be/0x3d0
[   16.133290]  ? cancel_delayed_work_sync+0x70/0x70
[   16.133294]  kthread+0xc0/0xf0
[   16.133296]  ? kthread_park+0x80/0x80
[   16.133299]  ret_from_fork+0x28/0x40
[   16.133302]  ? kthread_park+0x80/0x80
[   16.133304]  ret_from_fork_asm+0x11/0x20
[   16.133307]  </TASK>
[   16.133308] ---[ end trace 0000000000000000 ]---
[   16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[   16.133360] ieee80211 phy0: PM: failed to restore async: error -110

Cc: stable@vger.kernel.org
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-23 23:22:05 +01:00
.github/workflows
android
arch arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning 2024-11-23 23:22:02 +01:00
block block, bfq: fix procress reference leakage for bfqq in merge chain 2024-11-23 23:22:00 +01:00
certs
crypto crypto: aead,cipher - zeroize key buffer after use 2024-11-19 14:19:40 +01:00
Documentation proc: add config & param to block forcing mem writes 2024-11-23 23:21:39 +01:00
drivers wifi: iwlegacy: Clear stale interrupts before resuming device 2024-11-23 23:22:05 +01:00
firmware/tsp_goodix
fs NFS: remove revoked delegation from server's delegation list 2024-11-23 23:22:04 +01:00
gki
include kasan: Fix Software Tag-Based KASAN with GCC 2024-11-23 23:22:04 +01:00
init kernel/sys.c: implement custom uname override 2024-11-19 17:55:01 +01:00
io_uring io_uring/sqpoll: close race on waiting for sqring entries 2024-11-23 23:21:55 +01:00
ipc ipc: replace costly bailout check in sysvipc_find_ipc() 2024-11-23 23:20:53 +01:00
kernel bpf: Fix out-of-bounds write in trie_get_next_key() 2024-11-23 23:22:03 +01:00
kernel_build Added KernelSu 2024-11-19 22:41:46 +01:00
KernelSU@b766b98513 Added KernelSU 2024-11-19 23:08:59 +01:00
kunitconfigs
lib debugobjects: Fix conditions in fill_pool() 2024-11-23 23:21:31 +01:00
LICENSES
mm mm/swapfile: skip HugeTLB pages for unuse_vma 2024-11-23 23:21:54 +01:00
net wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower 2024-11-23 23:22:05 +01:00
samples Add gitignore file for samples/fanotify/ subdirectory 2024-11-23 23:20:30 +01:00
scripts kconfig: qconf: fix buffer overflow in debug links 2024-11-23 23:21:46 +01:00
security selinux: improve error checking in sel_write_load() 2024-11-23 23:22:01 +01:00
sound ASoC: cs42l51: Fix some error handling paths in cs42l51_probe() 2024-11-23 23:22:03 +01:00
test
tools usbip: tools: Fix detach_port() invalid port error path 2024-11-23 23:22:04 +01:00
usr
virt KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin() 2024-11-23 23:21:54 +01:00
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.amlogic
build.config.arm
build.config.common
build.config.db845c
build.config.erd8825_a25_s
build.config.erd8825_s
build.config.erd9925_evt0_s
build.config.erd9925_evt0_s5300_s
build.config.erd9925_s
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64
build.config.gki.aarch64.fips140
build.config.gki.aarch64.fips140_eval_testing
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes
build.config.gki_kprobes.aarch64
build.config.gki_kprobes.x86_64
build.config.hikey960
build.config.khwasan
build.config.mcd
build.config.rockchip
build.config.universal2100_s
build.config.universal8825_s
build.config.universal9925_evt0_s
build.config.universal9925_s
build.config.x86_64
build.sh build.sh: Forgot to change some things 2024-11-19 22:46:43 +01:00
COPYING
CREDITS
Kbuild
Kconfig
linux-stable.sh
MAINTAINERS
Makefile Linux 5.10.228 2024-11-23 23:21:58 +01:00
OWNERS
README
README.md
vendor_boot_module_order_exynos2100.cfg
vendor_boot_module_order_s5e8825.cfg
vendor_boot_module_order_s5e9925.cfg
vendor_module_list_s5e8825.cfg
vendor_module_list_s5e9925.cfg
vendor_module_list_s5e9925_b0s.cfg
vendor_module_list_s5e9925_g0s.cfg
vendor_module_list_s5e9925_r0s.cfg

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)