FireAsf 🔥
Find a file
Manish Rangankar 18f7d625de scsi: qedi: Fix crash while reading debugfs attribute
[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ]

The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.

To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.

BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS:  00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 ? __die_body+0x1a/0x60
 ? page_fault_oops+0x183/0x510
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x22/0x30
 ? memcpy_orig+0xcd/0x130
 vsnprintf+0x102/0x4c0
 sprintf+0x51/0x80
 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
 full_proxy_read+0x50/0x80
 vfs_read+0xa5/0x2e0
 ? folio_add_new_anon_rmap+0x44/0xa0
 ? set_pte_at+0x15/0x30
 ? do_pte_missing+0x426/0x7f0
 ksys_read+0xa5/0xe0
 do_syscall_64+0x58/0x80
 ? __count_memcg_events+0x46/0x90
 ? count_memcg_event_mm+0x3d/0x60
 ? handle_mm_fault+0x196/0x2f0
 ? do_user_addr_fault+0x267/0x890
 ? exc_page_fault+0x69/0x150
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d

Tested-by: Martin Hoyer <mhoyer@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-19 14:19:06 +01:00
.github/workflows
android
arch powerpc/uaccess: Fix build errors seen with GCC 13/14 2024-11-19 14:19:02 +01:00
block block/ioctl: prefer different overflow check 2024-11-19 14:19:06 +01:00
certs
crypto exit: Rename module_put_and_exit to module_put_and_kthread_exit 2024-11-19 12:27:50 +01:00
Documentation Documentation: Add missing documentation for EXPORT_OP flags 2024-11-19 12:28:33 +01:00
drivers scsi: qedi: Fix crash while reading debugfs attribute 2024-11-19 14:19:06 +01:00
firmware/tsp_goodix
fs nilfs2: fix potential kernel bug due to lack of writeback flag waiting 2024-11-19 14:19:05 +01:00
gki
include hugetlb_encode.h: fix undefined behaviour (34 << 26) 2024-11-19 14:19:05 +01:00
init init/main.c: Fix potential static_command_line memory overflow 2024-11-19 11:32:23 +01:00
io_uring io_uring: fail NOP if non-zero op flags is passed in 2024-11-19 12:27:12 +01:00
ipc
kernel rcutorture: Fix invalid context warning when enable srcu barrier testing 2024-11-19 14:19:06 +01:00
kernel_build kernel_build: build*.sh: Add -Testing223 to zip/tar 2024-11-19 14:18:53 +01:00
kunitconfigs
lib dyndbg: fix old BUG_ON in >control parser 2024-11-19 11:32:49 +01:00
LICENSES
mm Revert "fs: add file and path permissions helpers" 2024-11-19 13:30:21 +01:00
net drop_monitor: replace spin_lock by raw_spin_lock 2024-11-19 14:19:06 +01:00
samples
scripts kconfig: fix comparison to constant symbols, 'm', 'n' 2024-11-19 12:27:10 +01:00
security ima: fix deadlock when traversing "ima_default_rules". 2024-11-19 12:26:38 +01:00
sound ALSA: timer: Set lower bound of start tick time 2024-11-19 12:27:11 +01:00
test
tools selftests/bpf: Fix flaky test btf_map_in_map/lookup_update 2024-11-19 14:19:06 +01:00
usr
virt KVM: Always flush async #PF workqueue when vCPU is being destroyed 2024-11-19 09:22:15 +01:00
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.amlogic
build.config.arm
build.config.common
build.config.db845c
build.config.erd8825_a25_s
build.config.erd8825_s
build.config.erd9925_evt0_s
build.config.erd9925_evt0_s5300_s
build.config.erd9925_s
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64
build.config.gki.aarch64.fips140
build.config.gki.aarch64.fips140_eval_testing
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes
build.config.gki_kprobes.aarch64
build.config.gki_kprobes.x86_64
build.config.hikey960
build.config.khwasan
build.config.mcd
build.config.rockchip
build.config.universal2100_s
build.config.universal8825_s
build.config.universal9925_evt0_s
build.config.universal9925_s
build.config.x86_64
build.sh
COPYING
CREDITS
Kbuild
Kconfig
linux-stable.sh
MAINTAINERS
Makefile Linux 5.10.220 2024-11-19 12:28:33 +01:00
OWNERS
README
README.md
vendor_boot_module_order_exynos2100.cfg
vendor_boot_module_order_s5e8825.cfg
vendor_boot_module_order_s5e9925.cfg
vendor_module_list_s5e8825.cfg
vendor_module_list_s5e9925.cfg
vendor_module_list_s5e9925_b0s.cfg
vendor_module_list_s5e9925_g0s.cfg
vendor_module_list_s5e9925_r0s.cfg

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)