FireAsf 🔥
Find a file
Huang-Huang Bao 14eab2181c pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins
commit 128f71fe014fc91efa1407ce549f94a9a9f1072c upstream.

The base iomux offsets for each GPIO pin line are accumulatively
calculated based off iomux width flag in rockchip_pinctrl_get_soc_data.
If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or
IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8
bytes, otherwise it would increase by 4 bytes.

Despite most of GPIO2-B iomux have 2-bit data width, which can be fit
into 4 bytes space with write mask, it actually take 8 bytes width for
whole GPIO2-B line.

Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328
GPIO2-B pins") wrongly set iomux width flag to 0, causing all base
iomux offset for line after GPIO2-B to be calculated wrong. Fix the
iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is
correctly increased by 8, matching the actual width of GPIO2-B iomux.

Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
Cc: stable@vger.kernel.org
Reported-by: Richard Kojedzinszky <richard@kojedz.in>
Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/
Tested-by: Richard Kojedzinszky <richard@kojedz.in>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/20240709105428.1176375-1-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-23 23:20:53 +01:00
.github/workflows
android
arch KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 2024-11-23 23:20:50 +01:00
block Revert "mm: apply init protection" 2024-11-19 18:15:13 +01:00
certs
crypto crypto: aead,cipher - zeroize key buffer after use 2024-11-19 14:19:40 +01:00
Documentation arm64: cpufeature: Fix the visibility of compat hwcaps 2024-11-23 23:20:31 +01:00
drivers pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins 2024-11-23 23:20:53 +01:00
firmware/tsp_goodix
fs binfmt_misc: pass binfmt_misc flags to the interpreter 2024-11-23 23:20:49 +01:00
gki
include binfmt_misc: pass binfmt_misc flags to the interpreter 2024-11-23 23:20:49 +01:00
init kernel/sys.c: implement custom uname override 2024-11-19 17:55:01 +01:00
io_uring io_uring/io-wq: limit retrying worker initialisation 2024-11-23 23:20:16 +01:00
ipc
kernel hrtimer: Prevent queuing of hrtimer without a function callback 2024-11-23 23:20:47 +01:00
kernel_build Added KernelSu 2024-11-19 22:41:46 +01:00
KernelSU@b766b98513 Added KernelSU 2024-11-19 23:08:59 +01:00
kunitconfigs
lib bitmap: introduce generic optimized bitmap_size() 2024-11-23 23:20:42 +01:00
LICENSES
mm memcg_write_event_control(): fix a user-triggerable oops 2024-11-23 23:20:43 +01:00
net nfsd: Don't call freezable_schedule_timeout() after each successful page allocation in svc_alloc_arg(). 2024-11-23 23:20:50 +01:00
samples Add gitignore file for samples/fanotify/ subdirectory 2024-11-23 23:20:30 +01:00
scripts kbuild: Fix '-S -c' in x86 stack protector scripts 2024-11-23 23:20:14 +01:00
security selinux: fix potential counting error in avc_add_xperms_decision() 2024-11-23 23:20:42 +01:00
sound ALSA: timer: Relax start tick time check for slave timer elements 2024-11-23 23:20:50 +01:00
test
tools tools: move alignment-related macros to new <linux/align.h> 2024-11-23 23:20:50 +01:00
usr
virt KVM: Always flush async #PF workqueue when vCPU is being destroyed 2024-11-19 09:22:15 +01:00
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.amlogic
build.config.arm
build.config.common
build.config.db845c
build.config.erd8825_a25_s
build.config.erd8825_s
build.config.erd9925_evt0_s
build.config.erd9925_evt0_s5300_s
build.config.erd9925_s
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64
build.config.gki.aarch64.fips140
build.config.gki.aarch64.fips140_eval_testing
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes
build.config.gki_kprobes.aarch64
build.config.gki_kprobes.x86_64
build.config.hikey960
build.config.khwasan
build.config.mcd
build.config.rockchip
build.config.universal2100_s
build.config.universal8825_s
build.config.universal9925_evt0_s
build.config.universal9925_s
build.config.x86_64
build.sh build.sh: Forgot to change some things 2024-11-19 22:46:43 +01:00
COPYING
CREDITS
Kbuild
Kconfig
linux-stable.sh
MAINTAINERS
Makefile Linux 5.10.224 2024-11-23 23:20:32 +01:00
OWNERS
README
README.md
vendor_boot_module_order_exynos2100.cfg
vendor_boot_module_order_s5e8825.cfg
vendor_boot_module_order_s5e9925.cfg
vendor_module_list_s5e8825.cfg
vendor_module_list_s5e9925.cfg
vendor_module_list_s5e9925_b0s.cfg
vendor_module_list_s5e9925_g0s.cfg
vendor_module_list_s5e9925_r0s.cfg

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)