FireAsf 🔥
Find a file
Chen Ridong 106a2662b1 cgroup/cpuset: Prevent UAF in proc_cpuset_show()
commit 1be59c97c83ccd67a519d8a49486b3a8a73ca28a upstream.

An UAF can happen when /proc/cpuset is read as reported in [1].

This can be reproduced by the following methods:
1.add an mdelay(1000) before acquiring the cgroup_lock In the
 cgroup_path_ns function.
2.$cat /proc/<pid>/cpuset   repeatly.
3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/
$umount /sys/fs/cgroup/cpuset/   repeatly.

The race that cause this bug can be shown as below:

(umount)		|	(cat /proc/<pid>/cpuset)
css_release		|	proc_cpuset_show
css_release_work_fn	|	css = task_get_css(tsk, cpuset_cgrp_id);
css_free_rwork_fn	|	cgroup_path_ns(css->cgroup, ...);
cgroup_destroy_root	|	mutex_lock(&cgroup_mutex);
rebind_subsystems	|
cgroup_free_root 	|
			|	// cgrp was freed, UAF
			|	cgroup_path_ns_locked(cgrp,..);

When the cpuset is initialized, the root node top_cpuset.css.cgrp
will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will
allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated
&cgroup_root.cgrp. When the umount operation is executed,
top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp.

The problem is that when rebinding to cgrp_dfl_root, there are cases
where the cgroup_root allocated by setting up the root for cgroup v1
is cached. This could lead to a Use-After-Free (UAF) if it is
subsequently freed. The descendant cgroups of cgroup v1 can only be
freed after the css is released. However, the css of the root will never
be released, yet the cgroup_root should be freed when it is unmounted.
This means that obtaining a reference to the css of the root does
not guarantee that css.cgrp->root will not be freed.

Fix this problem by using rcu_read_lock in proc_cpuset_show().
As cgroup_root is kfree_rcu after commit d23b5c577715
("cgroup: Make operations on the cgroup root_list RCU safe"),
css->cgroup won't be freed during the critical section.
To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to
replace task_get_css with task_css.

[1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd

Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-23 23:20:54 +01:00
.github/workflows
android
arch KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 2024-11-23 23:20:50 +01:00
block Revert "mm: apply init protection" 2024-11-19 18:15:13 +01:00
certs
crypto crypto: aead,cipher - zeroize key buffer after use 2024-11-19 14:19:40 +01:00
Documentation arm64: cpufeature: Fix the visibility of compat hwcaps 2024-11-23 23:20:31 +01:00
drivers ata: libata-core: Fix null pointer dereference on error 2024-11-23 23:20:54 +01:00
firmware/tsp_goodix
fs binfmt_misc: pass binfmt_misc flags to the interpreter 2024-11-23 23:20:49 +01:00
gki
include binfmt_misc: pass binfmt_misc flags to the interpreter 2024-11-23 23:20:49 +01:00
init kernel/sys.c: implement custom uname override 2024-11-19 17:55:01 +01:00
io_uring io_uring/io-wq: limit retrying worker initialisation 2024-11-23 23:20:16 +01:00
ipc ipc: replace costly bailout check in sysvipc_find_ipc() 2024-11-23 23:20:53 +01:00
kernel cgroup/cpuset: Prevent UAF in proc_cpuset_show() 2024-11-23 23:20:54 +01:00
kernel_build Added KernelSu 2024-11-19 22:41:46 +01:00
KernelSU@b766b98513 Added KernelSU 2024-11-19 23:08:59 +01:00
kunitconfigs
lib bitmap: introduce generic optimized bitmap_size() 2024-11-23 23:20:42 +01:00
LICENSES
mm memcg_write_event_control(): fix a user-triggerable oops 2024-11-23 23:20:43 +01:00
net mptcp: sched: check both backup in retrans 2024-11-23 23:20:53 +01:00
samples Add gitignore file for samples/fanotify/ subdirectory 2024-11-23 23:20:30 +01:00
scripts kbuild: Fix '-S -c' in x86 stack protector scripts 2024-11-23 23:20:14 +01:00
security selinux: fix potential counting error in avc_add_xperms_decision() 2024-11-23 23:20:42 +01:00
sound ALSA: timer: Relax start tick time check for slave timer elements 2024-11-23 23:20:50 +01:00
test
tools tools: move alignment-related macros to new <linux/align.h> 2024-11-23 23:20:50 +01:00
usr
virt KVM: Always flush async #PF workqueue when vCPU is being destroyed 2024-11-19 09:22:15 +01:00
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.amlogic
build.config.arm
build.config.common
build.config.db845c
build.config.erd8825_a25_s
build.config.erd8825_s
build.config.erd9925_evt0_s
build.config.erd9925_evt0_s5300_s
build.config.erd9925_s
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64
build.config.gki.aarch64.fips140
build.config.gki.aarch64.fips140_eval_testing
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes
build.config.gki_kprobes.aarch64
build.config.gki_kprobes.x86_64
build.config.hikey960
build.config.khwasan
build.config.mcd
build.config.rockchip
build.config.universal2100_s
build.config.universal8825_s
build.config.universal9925_evt0_s
build.config.universal9925_s
build.config.x86_64
build.sh build.sh: Forgot to change some things 2024-11-19 22:46:43 +01:00
COPYING
CREDITS
Kbuild
Kconfig
linux-stable.sh
MAINTAINERS
Makefile Linux 5.10.224 2024-11-23 23:20:32 +01:00
OWNERS
README
README.md
vendor_boot_module_order_exynos2100.cfg
vendor_boot_module_order_s5e8825.cfg
vendor_boot_module_order_s5e9925.cfg
vendor_module_list_s5e8825.cfg
vendor_module_list_s5e9925.cfg
vendor_module_list_s5e9925_b0s.cfg
vendor_module_list_s5e9925_g0s.cfg
vendor_module_list_s5e9925_r0s.cfg

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)