config SCSC_WLAN
tristate "Driver for Samsung SCSC Maxwell Wifi"
depends on SCSC_CORE
depends on CFG80211
if SCSC_WLAN != n
config SCSC_WLAN_KEY_MGMT_OFFLOAD
bool "Enable roam offload for SCSC WLAN"
default y
help
This option enables roam offload for SCSC WLAN.
config SCSC_WLAN_HIP4_PROFILING
bool "Enable HIP4 profiling"
default y
depends on SCSC_WLAN
help
This option enables HIP4 profiling
config SCSC_WLAN_DEBUG
bool "Enable debug output from the SCSC Wifi driver"
depends on SCSC_WLAN
select SCSC_WLAN_HIP4_PROFILING
help
This option enables debug support for the SCSC wifi chipset.
config SCSC_WLAN_SG
bool "Enable SCSC WLAN Scatter-gather and GSO support"
depends on SCSC_WLAN
default y
help
This option enables scatter-gather and GSO feature
config SCSC_WLAN_RX_NAPI
bool "Enable use of net device napi rx polling api"
default y
help
This option enables the drivers use of the napi api
config SCSC_WLAN_RX_NAPI_GRO
bool "Enable use of net device napi rx GRO"
depends on SCSC_WLAN_RX_NAPI
default y
help
This option enables the drivers use of the napi Generic Receive Offload
config SCSC_WLAN_ANDROID
bool "Android specific support"
default y
help
Enable support for Android specific aspects of the driver.
config SCSC_WLAN_STA_ONLY
bool "Support WLAN STA only (no P2P/AP/IBSS)"
default n
help
Enable only basic STA mode for debugging purposes
config SCSC_WLAN_KIC_OPS
bool "Wi-Fi service driver provides OPS for KIC to use for various tasks"
depends on SAMSUNG_KIC
default y
help
Provide Wi-Fi service driver OPS, which KIC can use for triggering Wi-Fi related events.
config SCSC_WLAN_GSCAN_ENABLE
bool "Enable GSCAN in SCSC wlan driver"
default y
help
This option enables GSCAN in SCSC wlan driver.
config WLBT_WARN_ON
bool "Enable wlbt warn on"
default y
help
Enable wlbt warn on
config SCSC_WLAN_WES_NCHO
bool "Enable NCHO/WES feature"
default y
help
This option enables the NCHO/WES feature
config SCSC_WLAN_MUTEX_DEBUG
bool "Enable Mutex debugging mechanism in slsi wlan driver"
default y
help
This option enables the Mutex debug reports in slsi wlan driver.
config CONFIG_SCSC_WLAN_DISABLE_NAT_KA
bool "Disable NAT"
default n
help
This option disables NAT.
config SCSC_WLAN_HANG_TEST
bool "Test HANG Event"
default y
help
This option facilitates triggering of HANG Event
to reset WLAN.
config SCSC_WLAN_NAT_KEEPALIVE_DISABLE
bool "Disable NAT KeepAlive"
default n
help
This option disables the NAT KeepAlive
Offload Feature.
config SCSC_WIFILOGGER
tristate "Samsung SCSC Android Wi-Fi Logger"
depends on SCSC_CORE
default n
config SCSC_WIFILOGGER_DEBUGFS
bool "Samsung SCSC Android Wi-Fi Logger DebugFS"
depends on SCSC_WIFILOGGER && DEBUG_FS
default y
config SCSC_WIFILOGGER_TEST
bool "Samsung SCSC Android Wi-Fi Logger Test Harness"
depends on SCSC_WIFILOGGER && SCSC_WIFILOGGER_DEBUGFS
default n
config SCSC_WLAN_ENHANCED_LOGGING
bool "Enable Enhanced Logging"
depends on SCSC_WIFILOGGER
default y
help
This option enables the Enhanced Logging
Feature.
config SCSC_WLAN_ACM_API
bool "Provide TSF read API"
default n
help
This option provides API to read TSF.
endif
config SCSC_WLAN_MAC_ADDRESS_FILENAME
string "MAC address filename"
default "/efs/wifi/.mac.info"
help
Select the programmed MAC address file.
config SCSC_WLAN_MAX_INTERFACES
int "Max number of virtual interfaces supported"
range 1 12
default 3
help
The driver structures are sized to support this
number of interfaces.
config SCSC_WLAN_WIFI_SHARING
bool "Wifi Sharing Support"
default n
help
This option tells if wifi sharing is supported or not.
config SCSC_WLAN_SAE_CONFIG
bool "Wpa3 Support"
default y
help
This option tells if wpa3 is supported or not.
config SCSC_WLAN_ENABLE_MAC_RANDOMISATION
bool "Wifi Mac Randomization Support"
default n
help
This option tells if mac randomization is supported or not.
config SCSC_WLAN_SINGLE_ANTENNA
depends on SCSC_WLAN_WIFI_SHARING
bool "Single Antenna Supported"
default y
help
This option tells if there is support for single
antenna or dual antenna.
config SCSC_AP_INTERFACE_NAME
string "AP net device interface name"
default "wlan1"
help
AP net device interface name.
config SCSC_WLAN_ACS_ENABLE
bool "ACS Support"
default y
help
This option tells if automatic channel selection is
supported or not.
config SCSC_AP_INTERFACE_NAME
string "AP net device interface name"
default "wlan1"
help
AP net device interface name.
config SCSC_WLAN_MHS_STATIC_INTERFACE
bool "Static AP Interface Support"
default n
help
This option tells if AP interface has been created
statically or dynamically.
is enabled or not.
config SCSC_WLAN_PRIORITISE_IMP_FRAMES
bool "Change priority of important frames such as DNS, MDNS, TCP SYN"
depends on SOC_EXYNOS9610
default y
help
The option enables the driver to prioritise important frames
(such as DNS, MDNS, TCP SYN) so that they are sent ahead of others.
config SCSC_WIFI_NAN_ENABLE
bool "Enable WiFi NAN"
default n
help
This option tells whether WiFi NAN is enabled or not.
config SCSC_WLAN_ENHANCED_PKT_FILTER
bool "Enable enhanced packet filtering in suspend"
default n
help
This option tells if UDP packet filtering in suspend is
supported or not.
config SCSC_WLAN_NUM_ANTENNAS
bool "Enable configuring and fetching of number of antennas"
default n
help
This option tells whether configuring and fetching of number of antennas is enabled or not.
config SCSC_ENHANCED_PACKET_STATS
bool "Enable enhanced packet stats"
default n
help
This option tells whether enhanced packet stats collection
is enabled or not.
config SCSC_WLAN_LOW_LATENCY_MODE
bool "Support enabling/disabling roaming as per latency mode"
default n
help
This option tells whether support is provided for enabling
or disabling roaming as per the latency mode.
config SCSC_WLAN_SET_PREFERRED_ANTENNA
bool "Enable the driver to set preferred antenna"
default y
help
This option enables the driver to set the preferred antenna.
config SLSI_WLAN_STA_FWD_BEACON
bool "Forwarding beacon support"
default y
help
This option tells if beacon forwarding in STA mode is enabled or not.
When it is enabled, Driver deliver beacon info of connected AP to Supplicant.
config SCSC_WLAN_STA_ENHANCED_ARP_DETECT
bool "Enable enhanced arp detection"
default n
help
This option tells whether enhanced arp detection
is enabled or not.
config SCSC_WLAN_SILENT_RECOVERY
bool "Enable silent recovery"
default y
help
This option tells if silent recovery is enabled or not.
config SCSC_WLAN_DUAL_STATION
bool "Enable dual station"
default n
help
This option tells if dual station feature is supported or not.
config SCSC_WLAN_MAX_LINK_SPEED
bool "Enable max link speed calculation"
default n
help
This option tells if max linkspeed calculation is enabled or not.
config SCSC_WLAN_ARP_FLOW_CONTROL
bool "Enable ARP flow control between Host and FW"
default y
help
This option tells if ARP flow control between Host and FW is enabled or not.
config SCSC_WLAN_AP_AUTO_RECOVERY
bool "Enable auto recovery for AP mode."
default n
help
This option tells if auto recovery in AP mode is enabled or not.
config SCSC_WLAN_DYNAMIC_ITO
bool "Enable dynamic ito"
default n
help
This option tells if dynamic ito feature is supported or not.
config SCSC_WLAN_MAC_ACL_PER_MAC
bool "Enable handling of MAC ACL list, received as multiple requests"
default n
help
This option tells if Driver handles MAC ACL list, received as multiple requests.
config SCSC_WLAN_ENHANCED_BIGDATA
bool "Send SCSC panic records on HANGED_EVENT"
default y
help
Enable this option to send panic records when HANGED_EVENT
is issued by the driver on FW panic.
config SCSC_WLAN_HE
bool "Enable HE Capability in Driver"
default n
help
Enable HE Capability in Driver.
config SCSC_WLAN_BSS_COLOR
bool "Enable making a bss color IE in kernel 5.4"
default n
help
This option enables making a bss color IE in kernel 5.4.
config SCSC_WLAN_RTT
bool "Enable WiFi RTT"
default n
help
This option tells whether WiFi RTT is enabled or not.
config SCSC_WLAN_NW_PKT_DROP
bool "Enable debugging for EAPOL/DHCP/ARP packet drop in Network Stack"
default n
help
This option enable the dumps for packets getting dropped in Network Stack.
config SCSC_WLAN_EXPONENTIAL_SCHED_SCAN
bool "Enable exponential scheduled scan"
default n
help
This option enables the exponential scheduled scan.
config SCSC_WLAN_OCV_SUPPORT
bool "Enable OCV on kernel version < 5.10"
default n
help
This option enables the OCV on kernel version < 5.10
config SCSC_WLAN_SAR_SUPPORTED
bool "Enables SAR configuration through NL commands"
default n
help
This option enables the SAR configuration through NL commands.
config SCSC_WLAN_DEBUG_MLME_WORK_STRUCT
bool "Enable this to debug memory corruption in mlme work struct"
default n
help
This option enables debug if memory corruption happen in mlme work struct.
config SCSC_WLAN_TX_API
bool "Enable Tx APIs"
default n
help
This option enables Tx APIs.
config SCSC_WLAN_CPUHP_MONITOR
bool "Enable CPU Hotplug Monitor"
default n
help
This option enables CPU Hotplug Monitor
config SCSC_WLAN_LOG_2_USER_SP
bool "Enable Logging for Driver events for user space"
default y
help
This option enables logging of driver events to user space