commit b909df18ce2a998afef81d58bbd1a05dc0788c40 upstream.
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0810c3d6dd2d29a9b92604d682eacd2902ce947 ]
The current 6fire code tries to release the resources right after the
call of usb6fire_chip_abort(). But at this moment, the card object
might be still in use (as we're calling snd_card_free_when_closed()).
For avoid potential UAFs, move the release of resources to the card's
private_free instead of the manual call of usb6fire_chip_destroy() at
the USB disconnect callback.
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-6-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04dcbb7f7b1908806b7dc22671cdbe78ff2b82c ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-5-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7df09bb348016943f56b09dcaafe221e3f73947 ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
Fixes: 030a07e44129 ("ALSA: Add USB US122L driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-3-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafb28f02be407e07a6f679e922a626592b481b0 ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
Fixes: 230cd5e24853 ("[ALSA] prevent oops & dead keyboard on usb unplugging while the device is be ing used")
Reported-by: syzbot+73582d08864d8268b6fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=73582d08864d8268b6fd
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-2-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ac7a12ead2be2e31bd5e796455bef31e8516845 ]
Minor code refactoring by merging the superfluous function calls.
The functions were split in the past for covering pre-history USB
driver code, but this is utterly useless.
Link: https://lore.kernel.org/r/20210517131545.27252-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: dafb28f02be4 ("ALSA: usx2y: Use snd_card_free_when_closed() at disconnection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a829dd5b3840fd9a24608ed73eb21ba239ae5334 ]
This patch fixes various trivial coding-style issues in usx2y code,
such as:
* the assginments in if condition
* comparison order with constants
* NULL / zero checks
* unsigned -> unsigned int
* addition of braces in control blocks
* debug print with function names
* move local variables in block into function head
* reduction of too nested indentations
No functional changes.
Link: https://lore.kernel.org/r/20210517131545.27252-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: dafb28f02be4 ("ALSA: usx2y: Use snd_card_free_when_closed() at disconnection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c0a58ef36f3de1be0d1c8565ca854bcabd37e2b ]
This patch corrects merely the spaces in the usx2y code, including the
superfluous trailing space in the debug prints and a slight reformat
of some comment lines. Nothing really touches about the code itself.
Link: https://lore.kernel.org/r/20210517131545.27252-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: dafb28f02be4 ("ALSA: usx2y: Use snd_card_free_when_closed() at disconnection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f891ca15b017707840c9e7f5afd9fc6cfd7d8b1 ]
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4413665dd6c528b31284119e3571c25f371e1c36 ]
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b8ea38fabab45ad911a32a336416062553dfe9c ]
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 4413665dd6c5 ("ALSA: usb-audio: Add quirks for Dell WD19 dock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 703235a244e533652346844cfa42623afb36eed1 upstream.
Add hw monitor volume control for POD HD500X. This is done adding
LINE6_CAP_HWMON_CTL to the capabilities
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a51c925c11d7b855167e64b63eb4378e5adfc11d ]
Specify shortnames for the following Logitech Devices: Rally bar, Rally
bar mini, Tap, MeetUp and Huddle.
Signed-off-by: Joshua Pius <joshuapius@chromium.org>
Link: https://patch.msgid.link/20240912152635.1859737-1-joshuapius@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3ad39b791c2ecf718afcaca30e5ceafa939d5c ]
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c286f204ce6ba7b48e3dcba53eda7df8eaa64dd9 upstream.
This patch adds a USB quirk for the Yamaha P-125 digital piano.
Signed-off-by: Juan José Arboleda <soyjuanarbol@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240813161053.70256-1-soyjuanarbol@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15b7a03205b31bc5623378c190d22b7ff60026f1 upstream.
There can be concurrent accesses to line6 midibuf from both the URB
completion callback and the rawmidi API access. This could be a cause
of KMSAN warning triggered by syzkaller below (so put as reported-by
here).
This patch protects the midibuf call of the former code path with a
spinlock for avoiding the possible races.
Reported-by: syzbot+78eccfb8b3c9a85fc6c5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000000949c061df288c5@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240805130129.10872-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03898691d42e0170e7d00f07cbe21ce0e9f3a8fa ]
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b7b7e1ab7619deb3b299b5e5c619c3e6f183a12d upstream.
USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right
surround channels for UAC1 channel map, respectively. But they should
have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are
rather "side" channels, not "surround". I guess I took those
mistakenly when I read the spec mentioning "surround left".
This patch corrects those entries to be the right channels.
Suggested-by: Sylvain BERTRAND <sylvain.bertrand@legeek.net>
Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240731142018.24750-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c4e51e424e2c772ce1836912a8b0b87cd61bc9d5 ]
For shutting up spurious KMSAN uninit-value warnings, just replace
kmalloc() calls with kzalloc() for the buffers used for
communications. There should be no real issue with the original code,
but it's still better to cover.
Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com
Message-ID: <20240402063628.26609-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a39d51ff1f52cd0b6fe7d379ac93bd8b4237d1b7 ]
If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
