[ Upstream commit e61568599c9ad638fdaba150fee07d7065e31851 ]
As near as I can tell, mode bit masking and setting S_IFREG is
already done by do_nfsd_create() and vfs_create(). The NFSv4 path
(do_open_lookup), for example, does not bother with this special
processing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f965021c8bc38965ecb1924f570c4842b33d408 ]
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_IO
NFS3ERR_STALE
NFS3ERR_BADHANDLE
NFS3ERR_SERVERFAULT
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 ]
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2f774424bfdcc2df3e17de0cefe74a4269cad5 ]
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee1f
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776aa ("NFSD: Clean up legacy NFS WRITE argument XDR decoders")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53b1119a6e5028b125f431a0116ba73510d82a72 ]
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dae9a6cab8009e526570e7477ce858dcdfeb256e ]
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76ed0dd96eeb2771b21bf5dcbd88326ef89ee0ed ]
During NFSv2 and NFSv3 READDIR/PLUS operations, NFSD advances
rq_next_page to the full size of the client-requested buffer, then
releases all those pages at the end of the request. The next request
to use that nfsd thread has to refill the pages.
NFSD does this even when the dirlist in the reply is small. With
NFSv3 clients that send READDIR operations with large buffer sizes,
that can be 256 put_page/alloc_page pairs per READDIR request, even
though those pages often remain unused.
We can save some work by not releasing dirlist buffer pages that
were not used to form the READDIR Reply. I've left the NFSv2 code
alone since there are never more than three pages involved in an
NFSv2 READDIR Reply.
Eventually we should nail down why these pages need to be released
at all in order to avoid allocating and releasing pages
unnecessarily.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f87fc2d34d475225e78b7f5c4eabb121f4282b2 ]
The benefit of the xdr_stream helpers is that they transparently
handle encoding an XDR data item that crosses page boundaries.
Most of the open-coded logic to do that here can be eliminated.
A sub-buffer and sub-stream are set up as a sink buffer for the
directory entry encoder. As an entry is encoded, it is added to
the end of the content in this buffer/stream. The total length of
the directory list is tracked in the buffer's @len field.
When it comes time to encode the Reply, the sub-buffer is merged
into rq_res's page array at the correct place using
xdr_write_pages().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1409e2de4f11034c8eb30775cc3e37039a4ef13 ]
Clean up: Counting the bytes used by each returned directory entry
seems less brittle to me than trying to measure consumed pages after
the fact.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cf353354af1a385f29dec4609a1532d32c83a25 ]
Also, clean up: Rename the encoder function to match the name of
the result structure in RFC 1813, consistent with other encoder
function names in nfs3xdr.c. "diropres" is an NFSv2 thingie.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c42f804d30f6a8d86665eca84071b316821ea08 ]
As an additional clean up, some renaming is done to more closely
reflect the data type and variable names used in the NFSv3 XDR
definition provided in RFC 1813. "attrstat" is an NFSv2 thingie.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40116ebd0934cca7e46423bdb3397d3d27eb9fb9 ]
De-duplicate some code that is used by both READDIR and READDIRPLUS
to build the dirlist in the Reply. Because this code is not related
to decoding READ arguments, it is moved to a more appropriate spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a8f37fb34a96267c656f7254e69bb9a2fc89fe4 ]
Code inspection shows that the server's NFSv3 READDIR implementation
handles offset cookies slightly differently than the NFSv2 READDIR,
NFSv3 READDIRPLUS, and NFSv4 READDIR implementations,
and there doesn't seem to be any need for this difference.
As a clean up, I copied the logic from nfsd3_proc_readdirplus().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 224c1c894e48cd72e4dd9fb6311be80cbe1369b0 ]
The NFSv3 READLINK request takes a single filehandle, so it can
re-use GETATTR's decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be63bd2ac6bbf8c065a0ef6dfbea76934326c352 ]
The code that sets up rq_vec is refactored so that it is now
adjacent to the nfsd_read() call site where it is used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2289e87b5951f97783f07fc895e6c5e804b53668 ]
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 788f7183fba86b46074c16e7d57ea09302badff4 ]
Start off the conversion to xdr_stream by de-duplicating the functions
that decode void arguments and encode void results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71fd721839a74d945c242299f6be29a246fc2131 ]
The macro is unused, remove it to tame gcc warning:
fs/nfsd/nfs3proc.c:702:0: warning: macro "nfsd3_fhandleres" is not used
[-Wunused-macros]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
