Commit graph

8 commits

Author SHA1 Message Date
Baokun Li
f43a666df7 ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]

Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.

ext4_mb_regular_allocator
  ext4_lock_group(sb, group)
  ext4_mb_good_group
   // check if the group bbitmap is corrupted
  ext4_mb_complex_scan_group
   // Scan group gets ac_b_ex but doesn't use it
  ext4_unlock_group(sb, group)
                           ext4_mark_group_bitmap_corrupted(group)
                           // The block bitmap was corrupted during
                           // the group unlock gap.
  ext4_mb_try_best_found
    ext4_lock_group(ac->ac_sb, group)
    ext4_mb_use_best_found
      mb_mark_used
      // Allocating blocks in block bitmap corrupted group

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-18 22:25:33 +01:00
Ye Bin
46a4ef6bed ext4: fix inconsistent between segment fstrim and full fstrim
[ Upstream commit 68da4c44b994aea797eb9821acb3a4a36015293e ]

Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-18 12:13:11 +01:00
Suraj Jitindar Singh
72f021135f ext4: allow for the last group to be marked as trimmed
commit 7c784d624819acbeefb0018bac89e632467cca5a upstream.

The ext4 filesystem tracks the trim status of blocks at the group
level.  When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.

Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.

ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected.  Rearrange the function slightly to make
it clear what we are calculating and returning.

Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt

Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed

After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed

Fixes: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc:  <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-18 12:12:55 +01:00
Baokun Li
298ad8c172 ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS
commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream.

For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:

=========================================================
 kernel BUG at fs/ext4/mballoc.c:4653!
 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
 CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
 Hardware name: linux,dummy-virt (DT)
 pc : ext4_mb_use_inode_pa+0x148/0x208
 lr : ext4_mb_use_inode_pa+0x98/0x208
 Call trace:
  ext4_mb_use_inode_pa+0x148/0x208
  ext4_mb_new_inode_pa+0x240/0x4a8
  ext4_mb_use_best_found+0x1d4/0x208
  ext4_mb_try_best_found+0xc8/0x110
  ext4_mb_regular_allocator+0x11c/0xf48
  ext4_mb_new_blocks+0x790/0xaa8
  ext4_ext_map_blocks+0x7cc/0xd20
  ext4_map_blocks+0x170/0x600
  ext4_iomap_begin+0x1c0/0x348
=========================================================

Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():

	ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
	if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
		goto adjust_bex;

The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.

The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.

The test case in [Link] can reproduce the above issue with 64k block size.

Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc:  <stable@kernel.org> # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-18 12:11:57 +01:00
Baokun Li
ecf7b12b47 ext4: avoid overlapping preallocations due to overflow
commit bedc5d34632c21b5adb8ca7143d4c1f794507e4c upstream.

Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.

This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-18 10:58:45 +01:00
Baokun Li
dab663b71b ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
commit bc056e7163ac7db945366de219745cf94f32a3e6 upstream.

When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:

=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
 <TASK>
 ext4_mb_use_best_found+0x203/0x2f0
 ext4_mb_try_best_found+0x163/0x240
 ext4_mb_regular_allocator+0x158/0x1550
 ext4_mb_new_blocks+0x86a/0xe10
 ext4_ext_map_blocks+0xb0c/0x13a0
 ext4_map_blocks+0x2cd/0x8f0
 ext4_iomap_begin+0x27b/0x400
 iomap_iter+0x222/0x3d0
 __iomap_dio_rw+0x243/0xcb0
 iomap_dio_rw+0x16/0x80
=========================================================

A simple reproducer demonstrating the problem:

	mkfs.ext4 -F /dev/sda -b 4096 100M
	mount /dev/sda /tmp/test
	fallocate -l1M /tmp/test/tmp
	fallocate -l10M /tmp/test/file
	fallocate -i -o 1M -l16777203M /tmp/test/file
	fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
	sleep 10 && killall -9 fsstress
	rm -f /tmp/test/tmp
	xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"

We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.

Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-18 10:58:45 +01:00
Baokun Li
ad2ecd9404 ext4: add two helper functions extent_logical_end() and pa_logical_end()
commit 43bbddc067883d94de7a43d5756a295439fbe37d upstream.

When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.

Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-18 10:58:45 +01:00
Gabriel2392
7ed7ee9edf Import A536BXXU9EXDC 2024-06-15 16:02:09 -03:00