[ Upstream commit e8061f06185be0a06a73760d6526b8b0feadfe52 ]
Previously, access_guest_page() did not check whether the given guest
address is inside of a memslot. This is not a problem, since
kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot
usually means that an addressing exception should be injected into the
guest.
Failure in copy_to/from_user however indicates that something is wrong
in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in
access_guest_page() when the guest address is outside guest memory. In
access_guest_real(), populate vcpu->arch.pgm.code such that
kvm_s390_inject_prog_cond() can be used in the caller for injecting into
the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make
sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in
guest_range_to_gpas()), so this case should never happen. Even if, the
handling is set up properly.
- access_guest_real() just passes the return code to its callers, which
are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always
return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this
could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on
write_guest_real() failure.
Fixes: 2293897805c2 ("KVM: s390: add architecture compliant guest access functions")
Cc: stable@vger.kernel.org
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7faa543df19bf62d4583a64d3902705747f2ad29 ]
Do not round down the first address to the page boundary, just translate
it normally, which gives the value we care about in the first place.
Given this, translating a single address is just the special case of
translating a range spanning a single page.
Make the output optional, so the function can be used to just check a
range.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20211126164549.7046-3-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 223e7fb979fa06934f1595b6ad0ae1d4ead1147f ]
Also initialize regs->psw.mask in perf_arch_fetch_caller_regs().
This way user_mode(regs) will return false, like it should.
It looks like all current users initialize regs to zero, so that this
doesn't fix a bug currently. However it is better to not rely on callers
to do this.
Fixes: 914d52e46490 ("s390: implement perf_arch_fetch_caller_regs")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream.
The parameters for the diag 0x258 are real addresses, not virtual, but
KVM was using them as virtual addresses. This only happened to work, since
the Linux kernel as a guest used to have a 1:1 mapping for physical vs
virtual addresses.
Fix KVM so that it correctly uses the addresses as real addresses.
Cc: stable@vger.kernel.org
Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers")
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 131b8db78558120f58c5dc745ea9655f6b854162 ]
Adding/removing large amount of pages at once to/from the CMM balloon
can result in rcu_sched stalls or workqueue lockups, because of busy
looping w/o cond_resched().
Prevent this by adding a cond_resched(). cmm_free_pages() holds a
spin_lock while looping, so it cannot be added directly to the existing
loop. Instead, introduce a wrapper function that operates on maximum 256
pages at once, and add it there.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0147addc4fb72a39448b8873d8acdf3a0f29aa65 ]
Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.
Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a1725281fc5b0009944b1c0e1d2c1dc311a09ec ]
Both the external call as well as the emergency signal submask bits in
control register 0 are set before any interrupt handler is registered.
Change the order and first register the interrupt handler and only then
enable the interrupts by setting the corresponding bits in control
register 0.
This prevents that the second part of the machine check handler for
early machine check handling is not executed: the machine check handler
sends an IPI to the CPU it runs on. If the corresponding interrupts are
enabled, but no interrupt handler is present, the interrupt is ignored.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cff59d8631e1409ffdd22d9d717e15810181b32c ]
The return value uv_set_shared() and uv_remove_shared() (which are
wrappers around the share() function) is not always checked. The system
integrity of a protected guest depends on the Share and Unshare UVCs
being successful. This means that any caller that fails to check the
return value will compromise the security of the protected guest.
No code path that would lead to such violation of the security
guarantees is currently exercised, since all the areas that are shared
never get unshared during the lifetime of the system. This might
change and become an issue in the future.
The Share and Unshare UVCs can only fail in case of hypervisor
misbehaviour (either a bug or malicious behaviour). In such cases there
is no reasonable way forward, and the system needs to panic.
This patch replaces the return at the end of the share() function with
a panic, to guarantee system integrity.
Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801112548.85303-1-imbrenda@linux.ibm.com
Message-ID: <20240801112548.85303-1-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Fixed up patch subject]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7278a8fb8d032dfdc03d9b5d17e0bc451cdc1492 ]
Without __unitialized, the following code is generated when
INIT_STACK_ALL_ZERO is enabled:
86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15)
8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15)
92: c0 10 00 00 00 08 larl %r1, 0xa2
98: e3 10 f0 a8 00 24 stg %r1, 168(%r15)
9e: b2 b2 f0 a0 lpswe 160(%r15)
The xc is not adding any security because psw is fully initialized
with the following instructions. Add __unitialized to the psw
definitiation to avoid the superfluous clearing of psw.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3882564a77c21eb746ba5364f3fa89b88de3d61 upstream.
Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.
This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc827 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.
Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.
Cc: stable@vger.kernel.org
Fixes: 48166e6ea47d ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7faacaeaf6ce12fae78751de5ad869d8f1e1cd7a ]
Initialize the correct fields of the nvme dump block.
This bug had not been detected before because first, the fcp and nvme fields
of struct ipl_parameter_block are part of the same union and, therefore,
overlap in memory and second, they are identical in structure and size.
Fixes: d70e38cb1dee ("s390: nvme dump support")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c922b73acaf39f867668d9cbe5dc69c23511f84 ]
Use correct symbolic constants IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN
to initialize nvme reipl block when 'scp_data' sysfs attribute is
being updated. This bug had not been detected before because
the corresponding fcp and nvme symbolic constants are equal.
Fixes: 23a457b8d57d ("s390: nvme reipl")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b961ec10b9f9719987470236feb50c967db5a652 ]
The return-address (RA) register r14 is specified as volatile in the
s390x ELF ABI [1]. Nevertheless proper CFI directives must be provided
for an unwinder to restore the return address, if the RA register
value is changed from its value at function entry, as it is the case.
[1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases
Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 412050af2ea39407fe43324b0be4ab641530ce88 ]
The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.
The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().
Fixes: 3afdfca69870 ("s390/mm: Clear skeys for newly mapped huge guest pmds")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-3-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 843c3280686fc1a83d89ee1e0b5599c9f6b09d0c ]
The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.
The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().
Fixes: 964c2c05c9f3 ("s390/mm: Clear huge page storage keys on enable_skey")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-2-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 378ca2d2ad410a1cd5690d06b46c5e2297f4c8c0 upstream.
Align system call table on 8 bytes. With sys_call_table entry size
of 8 bytes that eliminates the possibility of a system call pointer
crossing cache line boundary.
Cc: stable@kernel.org
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 367c50f78451d3bd7ad70bc5c89f9ba6dec46ca9 ]
Current average steal timer calculation produces volatile and inflated
values. The only user of this value is KVM so far and it uses that to
decide whether or not to yield the vCPU which is seeing steal time.
KVM compares average steal timer to a threshold and if the threshold
is past then it does not allow CPU polling and yields it to host, else
it keeps the CPU by polling.
Since KVM's steal time threshold is very low by default (%10) it most
likely is not effected much by the bloated average steal timer values
because the operating region is pretty small. However there might be
new users in the future who might rely on this number. Fix average
steal timer calculation by changing the formula from:
avg_steal_timer = avg_steal_timer / 2 + steal_timer;
to the following:
avg_steal_timer = (avg_steal_timer + steal_timer) / 2;
This ensures that avg_steal_timer is actually a naive average of steal
timer values. It now closely follows steal timer values but of course
in a smoother manner.
Fixes: 152e9b8676c6 ("s390/vtime: steal time exponential moving average")
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 723a2cc8d69d4342b47dfddbfe6c19f1b135f09b ]
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn")
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b988b1bb0053c0dcd26187d29ef07566a565cf55 ]
kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.
test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.
In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.
This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b13601d19c541158a6e18b278c00ba69ae37829 ]
If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.
test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.
In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.
Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d07f951903fa9922c375b8ab1ce81b18a0034e3b upstream.
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing.
Fixes: 0200f3ecc196 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 80df7d6af7f6d229b34cf237b2cc9024c07111cd ]
The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.
For the PCI block store the following restrictions apply:
1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned
Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.
It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.
On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130ac ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6b2dab41888332bf83f592131e7ea07756770a4 ]
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1b6 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 27072b8e18a73ffeffb1c140939023915a35134b upstream.
When the CMMA state needs to be reset, the no-dat bit also needs to be
reset. Failure to do so could cause issues in the guest, since the
guest expects the bit to be cleared after a reset.
Cc: <stable@vger.kernel.org>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 44d93045247661acbd50b1629e62f415f2747577 ]
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.
This can result in incorrect guest TLB flushes.
Fix this by simply marking all four pages.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3784231b1e091857bd129fd9658a8b3cedbdcd58 ]
Due to historical reasons mark_kernel_pXd() functions
misuse the notion of physical vs virtual addresses
difference.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 44d930452476 ("s390/cmma: fix detection of DAT pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1ae1c59c8c6e0b66a718308c623e0cb394dab6b upstream.
Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap
are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that
zdev->iommu_bitmap is a pointer to unsigned long but the above only
yields an allocation that is a multiple of sizeof(unsigned long) which
is 8 on s390x if the number of IOMMU pages is a multiple of 64.
This in turn is the case only if the effective IOMMU aperture is
a multiple of 64 * 4K = 256K. This is usually the case and so didn't
cause visible issues since both the virt_to_phys(high_memory) reduced
limit and hardware limits use nice numbers.
Under KVM, and in particular with QEMU limiting the IOMMU aperture to
the vfio DMA limit (default 65535), it is possible for the reported
aperture not to be a multiple of 256K however. In this case we end up
with an iommu_bitmap whose allocation is not a multiple of
8 causing bitmap operations to access it out of bounds.
Sadly we can't just fix this in the obvious way and use bitmap_zalloc()
because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap
grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper.
This might be a candidate for common code, but this area of code will
be replaced by the upcoming conversion to use the common code DMA API on
s390 so just add a local routine.
Fixes: 224593215525 ("s390/pci: use virtual memory for iommu bitmap")
Fixes: 13954fd6913a ("s390/pci_dma: improve lazy flush for unmap")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
