[ Upstream commit 5e53e4a66bc7430dd2d11c18a86410e3a38d2940 ]
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e694d2b5c58ba2d1e995d068707c8d966e7f5f2a ]
devm_kasprintf() can return a NULL pointer on failure but this
returned value in qcom_socinfo_probe() is not checked.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20240929072349.202520-1-hanchunchao@inspur.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4aebaf6e6efff548b01a3dc49b4b9074751c15b upstream.
When CONFIG_DVB_DYNAMIC_MINORS, ret is not initialized, and a
semaphore is left at the wrong state, in case of errors.
Make the code simpler and avoid mistakes by having just one error
check logic used weather DVB_DYNAMIC_MINORS is used or not.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410201717.ULWWdJv8-lkp@intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9e067488d8935b8cf00959764a1fa5de85d65725.1730926254.git.mchehab+huawei@kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71d04535e853305a76853b28a01512a62006351d upstream.
mmc_alloc_host() returns NULL pointer not PTR_ERR(), if it
fails, so replace the IS_ERR() check with NULL pointer check.
In commit 418f7c2de133 ("mmc: meson-gx: use devm_mmc_alloc_host"),
it checks NULL pointer not PTR_ERR, if devm_mmc_alloc_host() fails,
so make it to return NULL pointer to keep same with mmc_alloc_host(),
the drivers don't need to change the error handle when switch to
use devm_mmc_alloc_host().
Fixes: 80df83c2c57e ("mmc: core: add devm_mmc_alloc_host")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230217024333.4018279-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32c4514455b2b8fde506f8c0962f15c7e4c26f1d upstream.
Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.
This is documented in the datasheet and failures to do so lead to
commands corruption.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1635e407a4a64d08a8517ac59ca14ad4fc785e75 upstream.
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890.
Cc: stable@vger.kernel.org
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K")
Closes: https://lore.kernel.org/linux-mmc/614692b4-1dbe-31b8-a34d-cb6db1909bb7@w6rz.net/
Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-ID: <20241110114700.622372-1-aurelien@aurel32.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29ce8b8a4fa74e841342c8b8f8941848a3c6f29f upstream.
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd6e972cc5890d91d6749bb48e3912721c4e4b25 ]
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).
Fixes: 84d1bb2b139e ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 09b1ef9813a0742674f7efe26104403ca94a1b4a upstream.
Since commit 92a81562e695 ("leds: lp55xx: Add multicolor framework
support to lp55xx") there are two subsequent tests if the chan_nr
(reg property) is in valid range. One in the lp55xx_init_led()
function and one in the lp55xx_parse_common_child() function that
was added with the mentioned commit.
There are two issues with that.
First is in the lp55xx_parse_common_child() function where the reg
property is tested right after it is read from the device tree.
Test for the upper range is not correct though. Valid reg values are
0 to (max_channel - 1) so it should be >=.
Second issue is that in case the parsed value is out of the range
the probe just fails and no error message is shown as the code never
reaches the second test that prints and error message.
Remove the test form lp55xx_parse_common_child() function completely
and keep the one in lp55xx_init_led() function to deal with it.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Link: https://lore.kernel.org/r/20241017150812.3563629-1-michal.vokac@ysoft.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9ec6f1736363b2b2bb4e266997389740f628441 upstream.
uvc_unregister_video() can be called asynchronously from
uvc_disconnect(). If the device is still streaming when that happens, a
plethora of race conditions can occur.
Make sure that the device has stopped streaming before exiting this
function.
If the user still holds handles to the driver's file descriptors, any
ioctl will return -ENODEV from the v4l2 core.
This change makes uvc more consistent with the rest of the v4l2 drivers
using the vb2_fop_* and vb2_ioctl_* helpers.
This driver (and many other usb drivers) always had this problem, but it
wasn't possible to easily fix this until the vb2_video_unregister_device()
helper was added. So the Fixes tag points to the creation of that helper.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes: f729ef5796d8 ("media: videobuf2-v4l2.c: add vb2_video_unregister_device helper function")
Cc: stable@vger.kernel.org # 5.10.x
[hverkuil: add note regarding Fixes version]
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f514068fbc5d4d189c817adc7c4e32cffdc2e47 upstream.
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails.
Fixes: f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2842dec577900031826dc44e9bf0c66416d7173 upstream.
In set_frame_rate(), select a rate in rate_0 or rate_1 by checking
sd->frame_rate >= r->fps in a loop, but the loop condition terminates when
the index reaches zero, which fails to check the last elememt in rate_0 or
rate_1.
Check for >= 0 so that the last one in rate_0 or rate_1 is also checked.
Fixes: 189d92af707e ("V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.")
Cc: stable@vger.kernel.org
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a20869f7d798aa2b69e45b863eaf1b1ecf98278 upstream.
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a058b34b52ed3feb1f3ff6fd26aefeeeed20cba upstream.
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ts2020_probe+0xad/0xe10 [ts2020]
i2c_device_probe+0x421/0xb40
really_probe+0x266/0x850
...
The cause of the problem is that when using sysfs to dynamically register
an i2c device, there is no platform data, but the probe process of ts2020
needs to use platform data, resulting in a null pointer being accessed.
Solve this problem by adding checks to platform data.
Fixes: dc245a5f9b51 ("[media] ts2020: implement I2C client bindings")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59f8f0b54c8ffb4521f6bbd1cb6f4dfa5022e75e upstream.
'need_recover' and 'mrdev' are equivalent in raid10_sync_request(), and
inc mrdev->nr_pending is unreasonable if don't need recovery. Replace
'need_recover' with 'mrdev', and only inc nr_pending when needed.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527072218.2365857-3-linan666@huaweicloud.com
Cc: Hagar Gamal Halim <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7f8825b2a78ac392d3fbb3a2e65e56d9e39d75e9 ]
ifcvf_init_hw() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
Convert the error check to plain non-zero check.
Fixes: 5a2414bc454e ("virtio: Intel IFC VF driver for VDPA")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20241017013812.129952-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e845d2399a00f866f287e0cefbd4fc7d8ef0d2f7 ]
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a5ab8071114344f62a8b1e64ed3452a77257d76 ]
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73f476aa1975bae6a792b340f5b26ffcfba869a6 upstream.
The previous implementation of .handle_interrupt() did not take into
account the fact that all the interrupt status registers should be
acknowledged since multiple interrupt sources could be asserted.
Fix this by reading all the status registers before exiting with
IRQ_NONE or triggering the PHY state machine.
Fixes: 1d1ae3c6ca3f ("net: phy: ti: implement generic .handle_interrupt() callback")
Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210226153020.867852-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 464cb98f1c07298c4c10e714ae0c36338d18d316 upstream.
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37bb5628379295c1254c113a407cab03a0f4d0b4 upstream.
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue.
Fixes: 984f68683298 ("USB: serial: io_edgeport.c: remove dbg() usage")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dd08a0b4193087976db6b3ee7807de7e8316f96 upstream.
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 498dbd9aea205db9da674994b74c7bf8e18448bd upstream.
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit().
Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecf2b43018da9579842c774b7f35dbe11b5c38dd upstream.
This can lead to out of bounds writes since frames of this type were not
taken into account when calculating the size of the frames buffer in
uvc_parse_streaming.
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Benoit Sevens <bsevens@google.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6098475d4cb48d821bdf453c61118c56e26294f0 upstream.
Currently we have a global spi_add_lock which we take when adding new
devices so that we can check that we're not trying to reuse a chip
select that's already controlled. This means that if the SPI device is
itself a SPI controller and triggers the instantiation of further SPI
devices we trigger a deadlock as we try to register and instantiate
those devices while in the process of doing so for the parent controller
and hence already holding the global spi_add_lock. Since we only care
about concurrency within a single SPI bus move the lock to be per
controller, avoiding the deadlock.
This can be easily triggered in the case of spi-mux.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Hardik Gohil <hgohil@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a4510c762fc04c74cff264cd4d9e9f5bf364bae upstream.
This was found by a static analyzer.
There may be a potential integer overflow issue in
unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are
defined as "sector_t"(uint64_t), while uc->unstripe,
uc->chunk_size and uc->stripes are all defined as "uint32_t".
The result of the calculation will be limited to "uint32_t"
without correct casting.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: 18a5bf270532 ("dm: add unstriped target")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0ade5d98979585d4f5a93e4514c2e9a65afa08d upstream.
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f484697e619a83ecc370443a34746379ad99d204 upstream.
When shrinking the fast device, dm-cache iteratively searches for a
dirty bit among the cache blocks to be dropped, which is less efficient.
Use find_next_bit instead, as it is twice as fast as the iterative
approach with test_bit.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 235d2e739fcbe964c9ce179b4c991025662dcdb6 upstream.
When creating a cache device, the actual size of the cache origin might
be greater than the specified cache target length. In such case, the
number of origin blocks should match the cache target length, not the
full size of the origin device, since access beyond the cache target is
not possible. This issue occurs when reducing the origin device size
using lvm, as lvreduce preloads the new cache table before resuming the
cache origin, which can result in incorrect sizes for the discard bitset
and smq hotspot blocks.
Reproduce steps:
1. create a cache device consists of 4096 origin blocks
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. reduce the cache origin to 2048 oblocks, in lvreduce's approach
dmsetup reload corig --table "0 262144 linear /dev/sdc 262144"
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup suspend cache
dmsetup suspend corig
dmsetup suspend cdata
dmsetup suspend cmeta
dmsetup resume corig
dmsetup resume cdata
dmsetup resume cmeta
dmsetup resume cache
3. shutdown the cache, and check the number of discard blocks in
superblock. The value is expected to be 2048, but actually is 4096.
dmsetup remove cache corig cdata cmeta
dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"'
Fix by correcting the origin_blocks initialization in cache_create and
removing the unused origin_sectors from struct cache_args accordingly.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: c6b4fcbad044 ("dm: add cache target")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6dd15981c03f2cdc9a351a278f09b5479d53d2e upstream.
acpi_evaluate_object() may return AE_NOT_FOUND (failure), which
would result in dereferencing buffer.pointer (obj) while being NULL.
Although this case may be unrealistic for the current code, it is
still better to protect against possible bugs.
Bail out also when status is AE_NOT_FOUND.
This fixes 1 FORWARD_NULL issue reported by Coverity
Report: CID 1600951: Null pointer dereferences (FORWARD_NULL)
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Fixes: c9b7c809b89f ("drm/amd: Guard against bad data for ATIF ACPI method")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241031152848.4716-1-antonio@mandelbit.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d75b9468021c73108b4439794d69e892b1d24e3 upstream.
Avoid a possible buffer overflow if size is larger than 4K.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc6a931d1f3b412263d515fd93b21fc0ca5147fe upstream.
The modulo register defines the period of the edge-aligned PWM mode
(which is the only mode implemented). The reference manual states:
"The EPWM period is determined by (MOD + 0001h) ..." So the value that
is written to the MOD register must therefore be one less than the
calculated period length. Return -EINVAL if the calculated length is
already zero.
A correct MODULO value is particularly relevant if the PWM has to output
a high frequency due to a low period value.
Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Link: https://lore.kernel.org/r/1a3890966d68b9f800d457cbf095746627495e18.camel@iris-sensing.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6a3ea83fbe15d4818d01804e904cbb0e64e543b upstream.
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation.
Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba9cf6b430433e57bfc8072364e944b7c0eca2a4 upstream.
As pointed by Coverity, there is a hidden overflow condition there.
As date is signed and u8 is unsigned, doing:
date = (data[0] << 24)
With a value bigger than 07f will make all upper bits of date
0xffffffff. This can be demonstrated with this small code:
<code>
typedef int64_t time64_t;
typedef uint8_t u8;
int main(void)
{
u8 data[] = { 0xde ,0xad , 0xbe, 0xef };
time64_t date;
date = (data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
printf("Invalid data = 0x%08lx\n", date);
date = ((unsigned)data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
printf("Expected data = 0x%08lx\n", date);
return 0;
}
</code>
Fix it by converting the upper bit calculation to unsigned.
Fixes: cea28e7a55e7 ("media: pulse8-cec: reorganize function order")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 576a307a7650bd544fbb24df801b9b7863b85e2f upstream.
as reported by Coverity, if reading SNR registers fail, a negative
number will be returned, causing an underflow when reading SNR
registers.
Prevent that.
Fixes: 8953db793d5b ("V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14a22762c3daeac59a5a534e124acbb4d7a79b3a upstream.
The current logic allows word to be less than 2. If this happens,
there will be buffer overflows, as reported by smatch. Add extra
checks to prevent it.
While here, remove an unused word = 0 assignment.
Fixes: 6c96dbbc2aa9 ("[media] s5p-jpeg: add support for 5433")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ce3e6107103214d354a16729a472f588be60572 ]
We have two reports of failed memory allocation in btrfs' code which is
calling into report zones.
Both of these reports have the following signature coming from
__vmalloc_area_node():
kworker/u17:5: vmalloc error: size 0, failed to allocate pages, mode:0x10dc2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_NORETRY|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
Further debugging showed these where allocations of one sector (512
bytes) and at least one of the reporter's systems where low on memory,
so going through the overhead of allocating a vm area failed.
Switching the allocation from __vmalloc() to kvzalloc() avoids the
overhead of vmalloc() on small allocations and succeeds.
Note: the buffer is already freed using kvfree() so there's no need to
adjust the free path.
Cc: Qu Wenru <wqu@suse.com>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://github.com/kdave/btrfs-progs/issues/779
Link: https://github.com/kdave/btrfs-progs/issues/915
Fixes: 23a50861adda ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241030110253.11718-1-jth@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b9fa751d1aef5d262bde871c70a7f44262f0bc ]
Currently, adv76xx_log_status() reads some date using
io_read() which may return negative values. The current logic
doesn't check such errors, causing colorspace to be reported
on a wrong way at adv76xx_log_status(), as reported by Coverity.
If I/O error happens there, print a different message, instead
of reporting bogus messages to userspace.
Fixes: 54450f591c99 ("[media] adv7604: driver for the Analog Devices ADV7604 video decoder")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
