commit 50e4b3b94090babe8d4bb85c95f0d3e6b07ea86e upstream.
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ea87dfa31a7b0bb0ff1675e67b9e54883013074 upstream.
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff898623af2ed564300752bba83a680a1e4fec8d upstream.
AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.
Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream.
The parameters for the diag 0x258 are real addresses, not virtual, but
KVM was using them as virtual addresses. This only happened to work, since
the Linux kernel as a guest used to have a 1:1 mapping for physical vs
virtual addresses.
Fix KVM so that it correctly uses the addresses as real addresses.
Cc: stable@vger.kernel.org
Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers")
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream.
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes: 39a67d49ba35 ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acc450aa07099d071b18174c22a1119c57da8227 upstream.
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 131b8db78558120f58c5dc745ea9655f6b854162 ]
Adding/removing large amount of pages at once to/from the CMM balloon
can result in rcu_sched stalls or workqueue lockups, because of busy
looping w/o cond_resched().
Prevent this by adding a cond_resched(). cmm_free_pages() holds a
spin_lock while looping, so it cannot be added directly to the existing
loop. Instead, introduce a wrapper function that operates on maximum 256
pages at once, and add it there.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0147addc4fb72a39448b8873d8acdf3a0f29aa65 ]
Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.
Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 924725707d80bc2588cefafef76ff3f164d299bc ]
Add cputype definitions for Neoverse-N3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-261 ("MIDR_EL1 bit descriptions")
in issue 02 of the Neoverse-N3 TRM, which can be found at:
https://developer.arm.com/documentation/107997/0000/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5c178472af247c7b50f962495bb7462ba453b9fb upstream.
This is used in poison.h for poison pointer offset. Based on current
SV39, SV48 and SV57 vm layout, 0xdead000000000000 is a proper value
that is not mappable, this can avoid potentially turning an oops to
an expolit.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: fbe934d69eb7 ("RISC-V: Build Infrastructure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240705170210.3236-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d24449864da5838936669618356b0e30ca2999c3 upstream.
Currently the glibc isn't yet ported to 64-bit for hppa, so
there is no usable userspace available yet.
But it's possible to manually build a static 64-bit binary
and run that for testing. One such 64-bit test program is
available at http://ftp.parisc-linux.org/src/64bit.tar.gz
and it shows various issues with the existing 64-bit syscall
path in the kernel.
This patch fixes those issues.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9542130937e9dc707dd7c6b7af73326437da2d50 upstream.
For an itlb miss when executing code above 4 Gb on ILP64 adjust the
iasq/iaoq in the same way isr/ior was adjusted. This fixes signal
delivery for the 64-bit static test program from
http://ftp.parisc-linux.org/src/64bit.tar.gz. Note that signals are
handled by the signal trampoline code in the 64-bit VDSO which is mapped
into high userspace memory region above 4GB for 64-bit processes.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d19d638b1e6cf746263ef60b7d0dee0204d8216a ]
Modern (fortified) memcpy() prefers to avoid writing (or reading) beyond
the end of the addressed destination (or source) struct member:
In function ‘fortify_memcpy_chk’,
inlined from ‘syscall_get_arguments’ at ./arch/x86/include/asm/syscall.h:85:2,
inlined from ‘populate_seccomp_data’ at kernel/seccomp.c:258:2,
inlined from ‘__seccomp_filter’ at kernel/seccomp.c:1231:3:
./include/linux/fortify-string.h:580:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As already done for x86_64 and compat mode, do not use memcpy() to
extract syscall arguments from struct pt_regs but rather just perform
direct assignments. Binary output differences are negligible, and actually
ends up using less stack space:
- sub $0x84,%esp
+ sub $0x6c,%esp
and less text size:
text data bss dec hex filename
10794 252 0 11046 2b26 gcc-32b/kernel/seccomp.o.stock
10714 252 0 10966 2ad6 gcc-32b/kernel/seccomp.o.after
Closes: https://lore.kernel.org/lkml/9b69fb14-df89-4677-9c82-056ea9e706f5@gmail.com/
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/all/20240708202202.work.477-kees%40kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d92792a4b26e50b96ab734cbe203d8a4c932a7a9 upstream.
pt_event_snapshot_aux() uses pt->handle_nmi to determine if tracing
needs to be stopped, however tracing can still be going because
pt->handle_nmi is set to zero before tracing is stopped in pt_event_stop,
whereas pt_event_snapshot_aux() requires that tracing must be stopped in
order to copy a sample of trace from the buffer.
Instead call pt_config_stop() always, which anyway checks config for
RTIT_CTL_TRACEEN and does nothing if it is already clear.
Note pt_event_snapshot_aux() can continue to use pt->handle_nmi to
determine if the trace needs to be restarted afterwards.
Fixes: 25e8920b301c ("perf/x86/intel/pt: Add sampling support")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240715160712.127117-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2eda374e883ad297bd9fe575a16c1dc850346075 upstream.
New CPU #defines encode vendor and family as well as model.
[ dhansen: vertically align 0's in invlpg_miss_ids[] ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com
[ Ricardo: I used the old match macro X86_MATCH_INTEL_FAM6_MODEL()
instead of X86_MATCH_VFM() as in the upstream commit.
I also kept the ALDERLAKE_N name instead of ATOM_GRACEMONT. Both refer
to the same CPU model. ]
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fac1bceeeb04886fc2ee952672e6e6c85ce41dca ]
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09b3d870faa7bc3e96c0978ab3cf4e96e4b15571 ]
Stan Johnson recently reported a failure from the 'dump' command:
DUMP: Date of this level 0 dump: Fri Aug 9 23:37:15 2024
DUMP: Dumping /dev/sda (an unlisted file system) to /dev/null
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 3595695 blocks.
DUMP: Context save fork fails in parent 671
The dump program uses the clone syscall with the CLONE_IO flag, that is,
flags == 0x80000000. When that value is promoted from long int to u64 by
m68k_clone(), it undergoes sign-extension. The new value includes
CLONE_INTO_CGROUP so the validation in cgroup_css_set_fork() fails and
the syscall returns -EBADF. Avoid sign-extension by casting to u32.
Reported-by: Stan Johnson <userm57@yahoo.com>
Closes: https://lists.debian.org/debian-68k/2024/08/msg00000.html
Fixes: 6aabc1facdb2 ("m68k: Implement copy_thread_tls()")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/3463f1e5d4e95468dc9f3368f2b78ffa7b72199b.1723335149.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e49cfe364dea4345551516eb2fe53135a10432b ]
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d355c895fa4ddd8bec15569eee540baeed7df8c5 ]
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aebfd12521d9c7d0b502cf6d06314cfbcdccfe3b upstream.
Currently a lot of ftrace code assumes __fentry__ is at sym+0. However
with Intel IBT enabled the first instruction of a function will most
likely be ENDBR.
Change ftrace_location() to not only return the __fentry__ location
when called for the __fentry__ location, but also when called for the
sym+0 location.
Then audit/update all callsites of this function to consistently use
these new semantics.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.227581603@infradead.org
Stable-dep-of: e60b613df8b6 ("ftrace: Fix possible use-after-free issue in ftrace_location()")
[Shivani: Modified to apply on v5.10.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fcc514809de41153b43ccbe1a0cdf7f72b78e7e ]
A Linux guest on Hyper-V gets the TSC frequency from a synthetic MSR, if
available. In this case, set X86_FEATURE_TSC_KNOWN_FREQ so that Linux
doesn't unnecessarily do refined TSC calibration when setting up the TSC
clocksource.
With this change, a message such as this is no longer output during boot
when the TSC is used as the clocksource:
[ 1.115141] tsc: Refined TSC clocksource calibration: 2918.408 MHz
Furthermore, the guest and host will have exactly the same view of the
TSC frequency, which is important for features such as the TSC deadline
timer that are emulated by the Hyper-V host.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240606025559.1631-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240606025559.1631-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0075df288dd8a7abfe03b3766176c393063591dd ]
Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the
check for non-zero of memblock.reserved.cnt in mmu_init() would always
be true either because memblock.reserved.cnt is initialized to 1 or
because there were memory reservations earlier.
The removal of dummy empty entry in memblock caused this check to fail
because now memblock.reserved.cnt is initialized to 0.
Remove the check for non-zero of memblock.reserved.cnt because it's
perfectly fine to have an empty memblock.reserved array that early in
boot.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2488444274c70038eb6b686cba5f1ce48ebb9cdd ]
In a review discussion of the changes to support vCPU hotplug where
a check was added on the GICC being enabled if was online, it was
noted that there is need to map back to the cpu and use that to index
into a cpumask. As such, a valid ID is needed.
If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible
for the entry in cpu_madt_gicc[cpu] == NULL. This function would
then cause a NULL pointer dereference. Whilst a path to trigger
this has not been established, harden this caller against the
possibility.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-13-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d34b6f17b9ac93faa2791eb037dcb08bdf755de ]
ACPI identifies CPUs by UID. get_cpu_for_acpi_id() maps the ACPI UID
to the Linux CPU number.
The helper to retrieve this mapping is only available in arm64's NUMA
code.
Move it to live next to get_acpi_id_for_cpu().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-12-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50f2b98dc83de7809a5c5bf0ccf9af2e75c37c13 ]
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices".
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 824ac4a5edd3f7494ab1996826c4f47f8ef0f63d ]
The pointer isn't initialized by callers, but I have
encountered cases where it's still printed; initialize
it in all possible cases in setup_one_line().
Link: https://patch.msgid.link/20240703172235.ad863568b55f.Iaa1eba4db8265d7715ba71d5f6bb8c7ff63d27e9@changeid
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3e6245ebe7ef341639e9a7e402b3ade8ad45a19f upstream.
On a system with a GICv3, if a guest hasn't been configured with
GICv3 and that the host is not capable of GICv2 emulation,
a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2.
We therefore try to emulate the SGI access, only to hit a NULL
pointer as no private interrupt is allocated (no GIC, remember?).
The obvious fix is to give the guest what it deserves, in the
shape of a UNDEF exception.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820100349.3544850-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cb6ab446424649f03c82334634360c2e3043684 upstream.
Loongson64 C and G processors have EXTIMER feature which
is conflicting with CP0 counter.
Although the processor resets in EXTIMER disabled & INTIMER
enabled mode, which is compatible with MIPS CP0 compare, firmware
may attempt to enable EXTIMER and interfere CP0 compare.
Set timer mode back to MIPS compatible mode to fix booting on
systems with such firmware before we have an actual driver for
EXTIMER.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b432bf376c9c198a7ff48f1ed14a14c0ffbe1fe ]
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the setup_memory()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to setup_memory() to be earlier in the init
sequence so that the reserved memory regions are set aside before any
allocations are done using memblock.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2d5bccaca3e8c09c9b9c8485375f7bdbb2631d2 ]
simple_realloc() frees the original buffer (ptr) even if the
reallocation failed.
Fix it to behave like standard realloc() and only free the original
buffer if the reallocation succeeded.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69b0194ccec033c208b071e019032c1919c2822d ]
simple_malloc() will return NULL when there is not enough memory left.
Check pointer 'new' before using it to copy the old data.
Signed-off-by: Li zeming <zeming@nfschina.com>
[mpe: Reword subject, use change log from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221219021816.3012-1-zeming@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44c76825d6eefee9eb7ce06c38e1a6632ac7eb7d ]
In commit c1d171a00294 ("x86: randomize brk"), arch_randomize_brk() was
defined to use a 32MB range (13 bits of entropy), but was never increased
when moving to 64-bit. The default arch_randomize_brk() uses 32MB for
32-bit tasks, and 1GB (18 bits of entropy) for 64-bit tasks.
Update x86_64 to match the entropy used by arm64 and other 64-bit
architectures.
Reported-by: y0un9n132@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jiri Kosina <jkosina@suse.com>
Closes: https://lore.kernel.org/linux-hardening/CA+2EKTVLvc8hDZc+2Yhwmus=dzOUG5E4gV7ayCbu0MPJTZzWkw@mail.gmail.com/
Link: https://lore.kernel.org/r/20240217062545.1631668-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45b1ba7e5d1f6881050d558baf9bc74a2ae13930 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122030651.3818-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a1725281fc5b0009944b1c0e1d2c1dc311a09ec ]
Both the external call as well as the emergency signal submask bits in
control register 0 are set before any interrupt handler is registered.
Change the order and first register the interrupt handler and only then
enable the interrupts by setting the corresponding bits in control
register 0.
This prevents that the second part of the machine check handler for
early machine check handling is not executed: the machine check handler
sends an IPI to the CPU it runs on. If the corresponding interrupts are
enabled, but no interrupt handler is present, the interrupt is ignored.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cff59d8631e1409ffdd22d9d717e15810181b32c ]
The return value uv_set_shared() and uv_remove_shared() (which are
wrappers around the share() function) is not always checked. The system
integrity of a protected guest depends on the Share and Unshare UVCs
being successful. This means that any caller that fails to check the
return value will compromise the security of the protected guest.
No code path that would lead to such violation of the security
guarantees is currently exercised, since all the areas that are shared
never get unshared during the lifetime of the system. This might
change and become an issue in the future.
The Share and Unshare UVCs can only fail in case of hypervisor
misbehaviour (either a bug or malicious behaviour). In such cases there
is no reasonable way forward, and the system needs to panic.
This patch replaces the return at the end of the share() function with
a panic, to guarantee system integrity.
Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801112548.85303-1-imbrenda@linux.ibm.com
Message-ID: <20240801112548.85303-1-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Fixed up patch subject]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a21dcf0ea8566ebbe011c79d6ed08cdfea771de3 upstream.
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: e18962491696 ("arm64: numa: rework ACPI NUMA initialization")
Cc: <stable@vger.kernel.org> # 4.19.x
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/853d7f74aa243f6f5999e203246f0d1ae92d2b61.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0df3c7d7a73d75153090637392c0b73a63cdc24a upstream.
The i.MX6 cannot add any RGMII delays. The PHY has to add both the RX
and TX delays on the RGMII interface. Fix the interface mode. While at
it, use the new phy-connection-type property name.
Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85f1506337f0c79a4955edfeee86a18628e3735f upstream.
Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0db880fc865ffb522141ced4bfa66c12ab1fbb70 upstream.
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Shirisha Ganta <shirisha@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com
[ Conflicts in arch/powerpc/include/asm/interrupt.h
because machine_check_early() and machine_check_exception()
has been refactored. ]
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 919f18f961c03d6694aa726c514184f2311a4614 upstream.
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ef54a384526911095db465e77acc1cb5266b32c ]
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d245e03c324d083a0ec3b9ab8ebd46ec9848d7 ]
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd2ff5f0b320f418288e7a1f919f648fbc8a0dfc ]
Add cputype definitions for Cortex-X925. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-285 ("MIDR_EL1 bit descriptions")
in issue 0001-05 of the Cortex-X925 TRM, which can be found at:
https://developer.arm.com/documentation/102807/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add332c40328cf06fe35e4b3cde8ec315c4629e5 ]
Add cputype definitions for Cortex-A720. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-186 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-A720 TRM, which can be found at:
https://developer.arm.com/documentation/102530/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5a6f238700f38b534456608588723fba96c5ab ]
Add cputype definitions for Cortex-X3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-263 ("MIDR_EL1 bit descriptions")
in issue 07 of the Cortex-X3 TRM, which can be found at:
https://developer.arm.com/documentation/101593/0102/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ce85db6c2141b7ffb95709d76fc55a27ff3cdc1 ]
Add cputype definitions for Neoverse-V3. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0001-04 of the Neoverse-V3 TRM, which can be found at:
https://developer.arm.com/documentation/107734/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a0a04676fa7796d9cbc9eb5ca120aaa194d2dd ]
Add cputype definitions for Cortex-X4. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-X4 TRM, which can be found at:
https://developer.arm.com/documentation/102484/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflict (dealt with upstream via a later merge) ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d9d9dcc70b96b5e5d7801bd5fbf8491b07b13d ]
Add the part number and MIDR for Neoverse-V2
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 237405ebef580a7352a52129b2465c117145eafa ]
arm64 advertises hardware features to user-space via HWCAPs, and by
emulating access to the CPUs id registers. The cpufeature code has a
sanitised system-wide view of an id register, and a sanitised user-space
view of an id register, where some features use their 'safe' value
instead of the hardware value.
It is currently possible for a HWCAP to be advertised where the user-space
view of the id register does not show the feature as supported.
Erratum workaround need to remove both the HWCAP, and the feature from
the user-space view of the id register. This involves duplicating the
code, and spreading it over cpufeature.c and cpu_errata.c.
Make the HWCAP code use the user-space view of id registers. This ensures
the values never diverge, and allows erratum workaround to remove HWCAP
by modifying the user-space view of the id register.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220909165938.3931307-2-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fixup lack of 'width' parameter ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41e71dbb0e0a0fe214545fe64af031303a08524c ]
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions.
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c710050c47d45eb77b28c271cddefc5c785cb40 ]
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel.
Fixes: 07037db5d479 ("RISC-V: Paging and MMU")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731084547.85380-1-qiaozhe@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 45547a0a93d85f704b49788cde2e1d9ab9cd363b upstream.
With CONFIG_FSL_IFC now being user-visible, and thus changed from a select
to depends in CONFIG_MTD_NAND_FSL_IFC, the dependencies needs to be
selected in defconfigs.
Depends-on: 9ba0cae3cac0 ("memory: fsl_ifc: Make FSL_IFC config visible and selectable")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240530-fsl-ifc-config-v3-2-1fd2c3d233dd@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4cf5fc01ce83e5c0bcf3dbb9f929428646b9098 ]
missing fdput() on one of the failure exits
Fixes: eacc56bb9de3e # v5.2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a263e5f309f32301e1f3ad113293f4e68a82a646 ]
When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.
This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.
Based on the work of Vladimir Kondratiev
<vladimir.kondratiev@mobileye.com> and the feedback from Jiaxun Yang
<jiaxun.yang@flygoat.com>.
Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d0a8a490aa3a2a82de8826aaf1dfa38575cb77a ]
We need to have the = as part of the option so that the
value can be parsed properly. Also document that it must
be given in nanoseconds, not seconds.
Fixes: 065038706f77 ("um: Support time travel mode")
Link: https://patch.msgid.link/20240417102744.14b9a9d4eba0.Ib22e9136513126b2099d932650f55f193120cd97@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 77543269ff23c75bebfb8e6e9a1177b350908ea7 upstream.
Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.
Set up basic information and select proper builtin DTB for
Loongson-2K.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8de4ed75bd14ed197119ac509c6902a8561e0c1c upstream.
Include linux/processor.h to fix build error:
arch/mips/sgi-ip30/ip30-console.c: In function ‘prom_putchar’:
arch/mips/sgi-ip30/ip30-console.c:21:17: error: implicit declaration of function ‘cpu_relax’ [-Werror=implicit-function-declaration]
21 | cpu_relax();
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad97196379d0b8cb24ef3d5006978a6554e6467f upstream.
topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit
type, even if the underlying type is 64-bit, and so, if necessary, must
be cast to a larger type when calculations are done.
Fix a topa_entry->base address calculation by adding a cast.
Without the cast, the address was limited to 36-bits i.e. 64GiB.
The address calculation is used on systems that do not support Multiple
Entry ToPA (only Broadwell), and affects physical addresses on or above
64GiB. Instead of writing to the correct address, the address comprising
the first 36 bits would be written to.
Intel PT snapshot and sampling modes are not affected.
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5638bd722a44bbe97c1a7b3fae5b9efddb3e70ff upstream.
topa_entry->base needs to store a pfn. It obviously needs to be
large enough to store the largest possible x86 pfn which is
MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small.
Increase the size of topa_entry->base from 36 bits to 40 bits.
Note, systems where physical addresses can be 256TiB or more are affected.
[ Adrian: Amend commit message as suggested by Dave Hansen ]
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Marco Cavenati <cavenati.marco@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 322a569c4b4188a0da2812f9e952780ce09b74ba upstream.
Move the non-VMX chunk of the "interrupt blocked" checks to a separate
helper so that KVM can reuse the code to detect if interrupts are blocked
for L2, e.g. to determine if a virtual interrupt _for L2_ is a valid wake
event. If L1 disables HLT-exiting for L2, nested APICv is enabled, and L2
HLTs, then L2 virtual interrupts are valid wake events, but if and only if
interrupts are unblocked for L2.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d8491d3e726984343dd8c3cdbe2f2b47cfdd928 upstream.
On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt
storm coming from the accelerator board causes the machine to crash in
local_irq_enable() or auto_irq_enable(). Disabling interrupts for the
Warp1260 in amiga_parse_bootinfo() fixes the problem.
Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local
Cc: stable <stable@kernel.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14196e47c5ffe32af7ed5a51c9e421c5ea5bccce ]
In the xmon disassembly code there are several CPU feature checks to
determine what dialects should be passed to the disassembler. The
dialect controls which instructions the disassembler will recognise.
Unfortunately the checks are incorrect, because instead of passing a
single CPU feature they are passing a mask of feature bits.
For example the code:
if (cpu_has_feature(CPU_FTRS_POWER5))
dialect |= PPC_OPCODE_POWER5;
Is trying to check if the system is running on a Power5 CPU. But
CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on
a Power5.
In practice the test will always return true for any 64-bit CPU, because
at least one bit in the mask will be present in the CPU_FTRS_ALWAYS
mask.
Similarly for all the other checks against CPU_FTRS_xx masks.
Rather than trying to match the disassembly behaviour exactly to the
current CPU, just differentiate between 32-bit and 64-bit, and Altivec,
VSX and HTM.
That will cause some instructions to be shown in disassembly even
on a CPU that doesn't support them, but that's OK, objdump -d output
has the same behaviour, and if anything it's less confusing than some
instructions not being disassembled.
Fixes: 897f112bb42e ("[POWERPC] Import updated version of ppc disassembly code for xmon")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509121248.270878-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89c7f5078935872cf47a713a645affb5037be694 ]
This does not matter the least, but there is no other .[ch] file in the
repo that is executable, so clean this up.
Fixes: 29b83a64df3b ("MIPS: Octeon: Add PCIe link status check")
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c3ea1ec96307dbfbb2f16d96c674c5cc80f445 ]
Remove the unused cif_stack argument and add a protype in oplib_64.h
Commit ef3e035c3a9b ("sparc64: Fix register corruption in top-most
kernel stack frame during boot.") removed the cif_stack argument to
prom_cif init in the declaration at the caller site and the usage of it
within prom_cif_init, but not in the function signature of the function
itself.
This also fixes the following warning:
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’
Fixes: ef3e035c3a9b ("sparc64: Fix register corruption in top-most kernel stack frame during boot.")
Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3520b251dcae2b4a27b95cd6f745c54fd658bda5 ]
Currently, perf allocates an array of page pointers which is limited in
size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer
size to 2GiB. Should that limitation be lifted, the Intel PT driver can
support larger sizes, except for one calculation in
pt_topa_entry_for_page(), which is limited to 32-bits.
Fix pt_topa_entry_for_page() address calculation by adding a cast.
Fixes: 39152ee51b77 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78ab3d352f2982bf3f7e506bfbaba7afee1ed8a9 ]
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.
Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.
Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240628180852.1738922-2-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 726d8c965bae2d7468445d990849e281dca8cbf7 ]
The audio driver should not use a hardwired gpio number
from the header. Change it to use a lookup table.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 78ab3d352f29 ("ARM: spitz: fix GPIO assignment for backlight")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21b9e722ad28c19c2bc83f18f540b3dbd89bf762 ]
The return value of __invalid_xchg_size() is assigned to tmp instead of
the return variable x. Assign it to x instead.
Fixes: 2501cf768e4009a0 ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer")
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f70065a9fd988983b2c693631b801f25a615fc04 ]
Avoid freeze on Atari TT / MegaSTe boot with continuous messages of:
unexpected interrupt from 112
Which was due to VBL interrupt being enabled in SCU sys mask, but there
being no handler for that any more.
(Bug and fix were first verified on real Atari TT HW by Christian,
this patch later on in Hatari emulator.)
Fixes: 1fa0b29f3a43f9dd ("fbdev: Kill Atari vblank cursor blinking")
Reported-by: Nicolas Pomarède <npomarede@corp.free.fr>
Closes: https://listengine.tuxfamily.org/lists.tuxfamily.org/hatari-devel/2024/06/msg00016.html
Closes: https://lore.kernel.org/all/9aa793d7-82ed-4fbd-bce5-60810d8a9119@helsinkinet.fi
Tested-by: Christian Zietz <czietz@gmx.net>
Signed-off-by: Eero Tamminen <oak@helsinkinet.fi>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20240624144901.5236-1-oak@helsinkinet.fi
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74e1c956a68a65d642447d852e95b3fbb69bebaa ]
There is a comment in the imx6q variant dtsi claiming that these
modules will have one more chip select than the imx6dl variant.
This is wrong. Ordinary GPIOs are used for chip selects and both
variants of the module share the very same PCB and both have this
GPIO routed to the SPI0_CS1# pin of the SMARC connector.
Fix it by moving the third chip select description to the common dtsi.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b972d6b3b46345023aee56a95df8e2c137aa4ee4 ]
On i.MX6 the board is reset by the watchdog. But in turn to do a
complete board reset, we have to assert the WDOG_B output which is
routed also to the CPLD which then do a complete power-cycle of the
board.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edfea889a049abe80f0d55c0365bf60fbade272f ]
The PHY reset line is connected to both the SoC (GPIO1_25) and
the CPLD. We must not use the GPIO1_25 as it will drive against
the output buffer of the CPLD. Instead there is another GPIO
(GPIO2_01), an input to the CPLD, which will tell the CPLD to
assert the PHY reset line.
Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module")
Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 ]
Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios
property. The reset-assert-us value is taken from the existing logic
since the fec driver will add an 1ms assert delay per default if
phy-reset-gpios is used and phy-reset-duration is not specified.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: edfea889a049 ("ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7821fa101eab529521aa4b724bf708149d70820c ]
iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword()
that return PCIBIOS_* codes but functions also return -ENODEV which are
not compatible error codes. As neither of the functions are related to
PCI read/write functions, they should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9d7b435dfaec58432f4106aaa632bf39f52ce9f ]
xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240527125538.13620-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724852059e97c48557151b3aa4af424614819752 ]
intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 5b395e2be6c4 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240527125538.13620-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec0b4c4d45cf7cf9a6c9626a494a89cb1ae7c645 ]
x86_of_pci_irq_enable() returns PCIBIOS_* code received from
pci_read_config_byte() directly and also -EINVAL which are not
compatible error types. x86_of_pci_irq_enable() is used as
(*pcibios_enable_irq) function which should not return PCIBIOS_* codes.
Convert the PCIBIOS_* return code from pci_read_config_byte() into
normal errno using pcibios_err_to_errno().
Fixes: 96e0a0797eba ("x86: dtb: Add support for PCI devices backed by dtb nodes")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
With significant code churn, the 'read' result from callbench can
regress from 4000 ns to 7000 ns, despite no changes directly affecting
the code paths exercised by callbench. This can also happen when playing
with compiler options that affect the kernel's size.
Upon further investigation, it turns out that /dev/zero, which callbench
uses for its file benchmarks, makes heavy use of clear_user() when
accessed via read(). When the regression occurs, __arch_clear_user()
goes from being 16-byte aligned to being 4-byte aligned.
A recent upstream change to arm64's clear_user() implementation, commit
344323e0428b ("arm64: Rewrite __arch_clear_user()"), mentions this:
Apparently some folks examine large reads from /dev/zero closely enough
to notice the loop being hot, so align it per the other critical loops
(presumably around a typical instruction fetch granularity).
As such, make __arch_clear_user() 16-byte aligned to fix the regression
and match upstream.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
commit 24d3ba0a7b44c1617c27f5045eecc4f34752ab03 upstream.
The 32-bit ARM kernel stops working if the kernel grows to the point
where veneers for __get_user_* are created.
AAPCS32 [1] states, "Register r12 (IP) may be used by a linker as a
scratch register between a routine and any subroutine it calls. It
can also be used within a routine to hold intermediate values between
subroutine calls."
However, bl instructions buried within the inline asm are unpredictable
for compilers; hence, "ip" must be added to the clobber list.
This becomes critical when veneers for __get_user_* are created because
veneers use the ip register since commit 02e541db0540 ("ARM: 8323/1:
force linker to use PIC veneers").
[1]: https://github.com/ARM-software/abi-aa/blob/2023Q1/aapcs32/aapcs32.rst
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1216e62d039bf63a539bbe718536ec789a853dd ]
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240617140240.580453-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5679a0aae2d8cda72169452c32e5cb88a7ab33 ]
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a986fa57fd81a1430e00b3c6cf8a325d6f894a63 ]
Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().
It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.
Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.
With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:
BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Call Trace:
dump_stack_lvl+0xb4/0x108 (unreliable)
print_report+0x2b4/0x6ec
kasan_report+0x118/0x2b0
__asan_load4+0xb8/0xd0
kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
kvm_vfio_set_attr+0x524/0xac0 [kvm]
kvm_device_ioctl+0x144/0x240 [kvm]
sys_ioctl+0x62c/0x1810
system_call_exception+0x190/0x440
system_call_vectored_common+0x15c/0x2ec
...
Freed by task 0:
...
kfree+0xec/0x3e0
release_spapr_tce_table+0xd4/0x11c [kvm]
rcu_core+0x568/0x16a0
handle_softirqs+0x23c/0x920
do_softirq_own_stack+0x6c/0x90
do_softirq_own_stack+0x58/0x90
__irq_exit_rcu+0x218/0x2d0
irq_exit+0x30/0x80
arch_local_irq_restore+0x128/0x230
arch_local_irq_enable+0x1c/0x30
cpuidle_enter_state+0x134/0x5cc
cpuidle_enter+0x6c/0xb0
call_cpuidle+0x7c/0x100
do_idle+0x394/0x410
cpu_startup_entry+0x60/0x70
start_secondary+0x3fc/0x410
start_secondary_prolog+0x10/0x14
Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.
With the fix in place the test case no longer triggers the UAF.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8ff059b8531f3b98e14f0461859fc7cdd95823e4 upstream.
Move some EFI related declarations that are only referenced on IA64 to
a new asm/efi.h arch header.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Frank Scheiner <frank.scheiner@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The linux-5.10-y backport of commit b377c66ae350 ("x86/retpoline: Add
NOENDBR annotation to the SRSO dummy return thunk") misplaced the new
NOENDBR annotation, repeating the annotation on __x86_return_thunk,
rather than adding the annotation to the !CONFIG_CPU_SRSO version of
srso_alias_untrain_ret, as intended.
Move the annotation to the right place.
Fixes: 0bdc64e9e716 ("x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7278a8fb8d032dfdc03d9b5d17e0bc451cdc1492 ]
Without __unitialized, the following code is generated when
INIT_STACK_ALL_ZERO is enabled:
86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15)
8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15)
92: c0 10 00 00 00 08 larl %r1, 0xa2
98: e3 10 f0 a8 00 24 stg %r1, 168(%r15)
9e: b2 b2 f0 a0 lpswe 160(%r15)
The xc is not adding any security because psw is fully initialized
with the following instructions. Add __unitialized to the psw
definitiation to avoid the superfluous clearing of psw.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
