[ Upstream commit 5304930dbae82d259bcf7e5611db7c81e7a42eff ]
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Fixes: 9315564747cb ("NFSD: Use only RQ_DROPME to signal the need to drop a reply")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9315564747cb6a570e99196b3a4880fb817635fd ]
Clean up: NFSv2 has the only two usages of rpc_drop_reply in the
NFSD code base. Since NFSv2 is going away at some point, replace
these in order to simplify the "drop this reply?" check in
nfsd_dispatch().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb12fae1c34b1fa7eaae92c5aadc72d86d7fae19 ]
nfserrno() is common to all nfs versions, but nfsproc.c is specifically
for NFSv2. Move it to vfs.c, and the prototype to vfs.h.
While we're in here, remove the #ifdef EDQUOT check in this function.
It's apparently a holdover from the initial merge of the nfsd code in
1997. No other place in the kernel checks that that symbol is defined
before using it, so I think we can dispense with it here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98124f5bd6c76699d514fbe491dd95265369cc99 ]
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103cc1fafee48adb91fca0e19deb869fd23e46ab ]
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9558f9304ca1903090fa5d995a3269a8e82804b4 ]
nfsd_create_locked() does not use the "fname" and "flen" arguments, so
drop them from declaration and all callers.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401bc1f90874280a80b93f23be33a0e7e2d1f912 ]
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit debf16f0c671cb8db154a9ebcd6014cfff683b80 ]
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93adc1e391a761441d783828b93979b38093d011 ]
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe2a71dda349a1afa75781f0cc7975be9784d15 ]
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12bcbd40fd931472c7fc9cf3bfe66799ece93ed8 ]
If we get back -EOPENSTALE from an NFSv4 open, then we either got some
unhandled error or the inode we got back was not the same as the one
associated with the dentry.
We really have no recourse in that situation other than to retry the
open, and if it fails to just return nfserr_stale back to the client.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d0db706c77d02055910fcfe2f6eb5155ff9d5e ]
Now that we have open file cache, it is possible that another client
deletes the file and DP will not know about it. Then IO to MDS would
fail with BADSTATEID and knfsd would start state recovery, which
should fail as well and then nfs read/write will fail with EBADF.
And it triggers a WARN() in nfserrno().
-----------[ cut here ]------------
WARNING: CPU: 0 PID: 13529 at fs/nfsd/nfsproc.c:758 nfserrno+0x58/0x70 [nfsd]()
nfsd: non-standard errno: -9
modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_connt
pata_acpi floppy
CPU: 0 PID: 13529 Comm: nfsd Tainted: G W 4.1.5-00307-g6e6579b #7
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014
0000000000000000 00000000464e6c9c ffff88079085fba8 ffffffff81789936
0000000000000000 ffff88079085fc00 ffff88079085fbe8 ffffffff810a08ea
ffff88079085fbe8 ffff88080f45c900 ffff88080f627d50 ffff880790c46a48
all Trace:
[<ffffffff81789936>] dump_stack+0x45/0x57
[<ffffffff810a08ea>] warn_slowpath_common+0x8a/0xc0
[<ffffffff810a0975>] warn_slowpath_fmt+0x55/0x70
[<ffffffff81252908>] ? splice_direct_to_actor+0x148/0x230
[<ffffffffa02fb8c0>] ? fsid_source+0x60/0x60 [nfsd]
[<ffffffffa02f9918>] nfserrno+0x58/0x70 [nfsd]
[<ffffffffa02fba57>] nfsd_finish_read+0x97/0xb0 [nfsd]
[<ffffffffa02fc7a6>] nfsd_splice_read+0x76/0xa0 [nfsd]
[<ffffffffa02fcca1>] nfsd_read+0xc1/0xd0 [nfsd]
[<ffffffffa0233af2>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc]
[<ffffffffa03073da>] nfsd3_proc_read+0xba/0x150 [nfsd]
[<ffffffffa02f7a03>] nfsd_dispatch+0xc3/0x210 [nfsd]
[<ffffffffa0233af2>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc]
[<ffffffffa0232913>] svc_process_common+0x453/0x6f0 [sunrpc]
[<ffffffffa0232cc3>] svc_process+0x113/0x1b0 [sunrpc]
[<ffffffffa02f740f>] nfsd+0xff/0x170 [nfsd]
[<ffffffffa02f7310>] ? nfsd_destroy+0x80/0x80 [nfsd]
[<ffffffff810bf3a8>] kthread+0xd8/0xf0
[<ffffffff810bf2d0>] ? kthread_create_on_node+0x1b0/0x1b0
[<ffffffff817912a2>] ret_from_fork+0x42/0x70
[<ffffffff810bf2d0>] ? kthread_create_on_node+0x1b0/0x1b0
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2f774424bfdcc2df3e17de0cefe74a4269cad5 ]
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee1f
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776aa ("NFSD: Clean up legacy NFS WRITE argument XDR decoders")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53b1119a6e5028b125f431a0116ba73510d82a72 ]
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dae9a6cab8009e526570e7477ce858dcdfeb256e ]
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0a55bb7148a49e549ee992200860e7a040d3a5 ]
In the reexport case, nfsd is currently passing along locks with the
reclaim bit set. The client sends a new lock request, which is granted
if there's currently no conflict--even if it's possible a conflicting
lock could have been briefly held in the interim.
We don't currently have any way to safely grant reclaim, so for now
let's just deny them all.
I'm doing this by passing the reclaim bit to nfs and letting it fail the
call, with the idea that eventually the client might be able to do
something more forgiving here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8141d6a2bb6c655ff0c0b81ced80d9025f03e926 ]
Clean up: Counting the bytes used by each returned directory entry
seems less brittle to me than trying to measure consumed pages after
the fact.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d52532002ffa217ad3fa4c3ba86c95203d21dd21 ]
Refactor: Add helper function similar to nfs3svc_encode_cookie3().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 788cd46ecf83ee2d561cb4e754e276dc8089b787 ]
Add a helper similar to nfsd3_init_dirlist_pages().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fcbd1c9456ba129d38420e345e91c4b6363db47 ]
If the code that sets up the sink buffer for nfsd_readlink() is
moved adjacent to the nfsd_readlink() call site that uses it, then
the only argument is a file handle, and the fhandle decoder can be
used instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c293ef993c8df0b1bea9ecb0de6eb96dec3ac9d ]
The code that sets up rq_vec is refactored so that it is now
adjacent to the nfsd_read() call site where it is used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2289e87b5951f97783f07fc895e6c5e804b53668 ]
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 788f7183fba86b46074c16e7d57ea09302badff4 ]
Start off the conversion to xdr_stream by de-duplicating the functions
that decode void arguments and encode void results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
