[ Upstream commit c41a701d18efe6b8aa402efab16edbaba50c9548 ]
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66be905cda24fb782b91053b196bd2e966f95b7 ]
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa95073fd290b5b3e45f067fa22bb25e59e1ff7c ]
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b1661 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ]
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730561d3c08d4a327cceaabf11365958a1c00cec ]
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f7633b ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ]
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ]
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae9a5ce7d3a9b3a9e07b31ab9e9c58450e3e9fd ]
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80cf ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d44c93fc2f5a0c47b23fa03d374e45259abd92d2 ]
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023ac0 ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d393f9479d4aaab0fa4c3caf513f28685e831f13 ]
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 291e4baf70019f17a81b7b47aeb186b27d222159 ]
Even if a vgem device is configured in, we will skip the import_vgem_fd()
test almost every time.
TAP version 13
1..11
# Testing heap: system
# =======================================
# Testing allocation and importing:
ok 1 # SKIP Could not open vgem -1
The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver
version information but leave the name field a non-null-terminated string.
Terminate it properly to actually test against the vgem device.
While at it, let's check the length of the driver name is exactly 4 bytes
and return early otherwise (in case there is a name like "vgemfoo" that
gets converted to "vgem\0" unexpectedly).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729024604.2046-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c9fe5eecc97680323ee83780ea3eaf440ba1b7 ]
Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped")
the variable test_ordinal doesn't exist in call_pre_case().
So it should not be accessed when an exception occurs.
This resolves the following splat:
...
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File ".../tdc.py", line 1028, in <module>
main()
File ".../tdc.py", line 1022, in main
set_operation_mode(pm, parser, args, remaining)
File ".../tdc.py", line 966, in set_operation_mode
catresults = test_runner_serial(pm, args, alltests)
File ".../tdc.py", line 642, in test_runner_serial
(index, tsr) = test_runner(pm, args, alltests)
File ".../tdc.py", line 536, in test_runner
res = run_one_test(pm, args, index, tidx)
File ".../tdc.py", line 419, in run_one_test
pm.call_pre_case(tidx)
File ".../tdc.py", line 146, in call_pre_case
print('test_ordinal is {}'.format(test_ordinal))
NameError: name 'test_ordinal' is not defined
Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped")
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a2fa1472083580b6c66bdaf291f591e1170123a upstream.
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 189f1a976e426011e6a5588f1d3ceedf71fe2965 ]
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 17c743b9da9e0d073ff19fd5313f521744514939 upstream.
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc9101 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f67a90a0c8f5b3d0acc18f10650d90fec44775f9 ]
Lately, an additional locking was added by commit c0a40097f0bc
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adae187ebedcd95d02f045bc37dfecfd5b29434b ]
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d8d7a63065b18df9555dbaab0b42d4c6f20943 ]
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de1b5ea789dc28066cc8dc634b6825bd6148f38b ]
The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's
necessary to check if it is positive before accumulating it to bytes_recvd.
Fixes: 16962b2404ac ("bpf: sockmap, add selftests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c8d7598dfed759bf1d9d0322b4c2b42eb7252d8 ]
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73810cd45b99c6c418e1c6a487b52c1e74edb20d ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b6df4c49a1cc2854a16937acd5fd3e6315d083 ]
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6715df8d5d24655b9fd368e904028112b54c7de1 upstream.
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d6d8f0c8b700c9493f2839abccb6d29028b4219 ]
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af2b7e5b741aaae9ffbba2c660def434e07aa241 ]
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4202e66a4b1fe6968f17f9f09bbc30d08f028a1 ]
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a21701edc41465de56f97914741bfb7bfc2517d ]
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240101083614.1076768-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d4202e66a4b1 ("selftests/mm: compaction_test: fix bogus test success on Aarch64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad665ef55eaad1ead1406a58a34f615a7c18b5e ]
Currently, the test tries to set nr_hugepages to zero, but that is not
actually done because the file offset is not reset after read(). Fix that
using lseek().
Link: https://lkml.kernel.org/r/20240521074358.675031-3-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 23a4b108accc29a6125ed14de4a044689ffeda78 upstream.
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e3548236d ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 019baf635eb6ffe8d6c1343f81788f02a7e0ed98 ]
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af902 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d75142dbeb2bd1587b9cc19f841578f541275a64 ]
This patch fixes the following "umount cgroup2" error in test_sockmap.c:
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Cgroup fd cg_fd should be closed before cleanup_cgroup_environment().
Fixes: 13a5f3ffd202 ("bpf: Selftests, sockmap test prog run without setting cgroup")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/0399983bde729708773416b8488bac2cd5e022b8.1712639568.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit c9c3cc6a13bddc76bb533ad8147a5528cac5ba5a which is
commit 91b80cc5b39f00399e8e2d17527cad2c7fa535e2 upstream.
map_hugetlb.c:18:10: fatal error: vm_util.h: No such file or directory
18 | #include "vm_util.h"
| ^~~~~~~~~~~
compilation terminated.
vm_util.h is not present in 5.10.y, as commit:642bc52aed9c ("selftests:
vm: bring common functions to a new file") is not present in stable
kernels <=6.1.y
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
..
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1a4ea83a6e67f1415a1f17c1af5e9c814c882bb5 upstream.
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66d6 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed366de8ec89d4f960d66c85fc37d9de22f7bf6d upstream.
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31974122cfdeaf56abc18d8ab740d580d9833e90 upstream.
The netdev CI runs in a VM and captures serial, so stdout and
stderr get combined. Because there's a missing new line in
stderr the test ends up corrupting KTAP:
# Successok 1 selftests: net: reuseaddr_conflict
which should have been:
# Success
ok 1 selftests: net: reuseaddr_conflict
Fixes: 422d8dc6fd3a ("selftest: add a reuseaddr test")
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240329160559.249476-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85506aca2eb4ea41223c91c5fe25125953c19b13 ]
While mq_perf_tests runs with the default kselftest timeout limit, which
is 45 seconds, the test takes about 60 seconds to complete on i3.metal
AWS instances. Hence, the test always times out. Increase the timeout
to 180 seconds.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49d821064c44cb5ffdf272905236012ea9ce50e3 ]
This exact case was fail for async crypto and we weren't
catching it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91b80cc5b39f00399e8e2d17527cad2c7fa535e2 ]
On systems with 64k page size and 512M huge page sizes, the allocation and
test succeeds but errors out at the munmap. As the comment states, munmap
will failure if its not HUGEPAGE aligned. This is due to the length of
the mapping being 1/2 the size of the hugepage causing the munmap to not
be hugepage aligned. Fix this by making the mapping length the full
hugepage if the hugepage is larger than the length of the mapping.
Link: https://lkml.kernel.org/r/20240119131429.172448-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc29036e1da1cf66e5f8312649aeec2d51ea3d86 ]
Running charge_reserved_hugetlb.sh generates errors if sh is set to
dash:
./charge_reserved_hugetlb.sh: 9: [[: not found
./charge_reserved_hugetlb.sh: 19: [[: not found
./charge_reserved_hugetlb.sh: 27: [[: not found
./charge_reserved_hugetlb.sh: 37: [[: not found
./charge_reserved_hugetlb.sh: 45: Syntax error: "(" unexpected
Switch to using /bin/bash instead of /bin/sh. Make the switch for
write_hugetlb_memory.sh as well which is called from
charge_reserved_hugetlb.sh.
Link: https://lkml.kernel.org/r/20240116090455.3407378-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691bb4e49c98a47bc643dd808453136ce78b15b4 ]
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100888fb6d8a185866b1520031ee7e3182b173de ]
With latest clang18 (main branch of llvm-project repo), when building bpf selftests,
[~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j
The following compilation error happens:
fatal error: error in backend: Branch target out of insn range
...
Stack dump:
0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi
-I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter
/home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf
-c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o
1. <eof> parser at end of file
2. Code generation
...
The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay
since cpu=v4 supports 32-bit branch target offset.
The above failure is due to upstream llvm patch [1] where some inlining behavior
are changed in clang18.
To workaround the issue, previously all 180 loop iterations are fully unrolled.
The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid
unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the
compiler is clang18, the unrollng amount is unconditionally reduced.
[1] 1a2e77cf9e
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ]
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
