commit 31643d84b8c3d9c846aa0e20bc033e46c68c7e7d upstream.
With the introduction of binder_available_for_proc_work_ilocked() in
commit 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") a binder
thread can only "wait_for_proc_work" after its thread->looper has been
marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}.
This means an unregistered reader risks waiting indefinitely for work
since it never gets added to the proc->waiting_threads. If there are no
further references to its waitqueue either the task will hang. The same
applies to readers using the (e)poll interface.
I couldn't find the rationale behind this restriction. So this patch
restores the previous behavior of allowing unregistered threads to
"wait_for_proc_work". Note that an error message for this scenario,
which had previously become unreachable, is now re-enabled.
Fixes: 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue")
Cc: stable@vger.kernel.org
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240711201452.2017543-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aaef73821a3b0194a01bd23ca77774f704a04d40 upstream.
Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying
txn") introduced changes to how binder objects are copied. In doing so,
it unintentionally removed an offset alignment check done through calls
to binder_alloc_copy_from_buffer() -> check_buffer().
These calls were replaced in binder_get_object() with copy_from_user(),
so now an explicit offset alignment check is needed here. This avoids
later complications when unwinding the objects gets harder.
It is worth noting this check existed prior to commit 7a67a39320df
("binder: add function to copy binder object from buffer"), likely
removed due to redundancy at the time.
Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240330190115.1877819-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97830f3c3088638ff90b20dfba2eb4d487bf14d7 upstream.
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a9ab0d963621d9d12199df9817e66982582d5a5 upstream.
Task A calls binder_update_page_range() to allocate and insert pages on
a remote address space from Task B. For this, Task A pins the remote mm
via mmget_not_zero() first. This can race with Task B do_exit() and the
final mmput() refcount decrement will come from Task A.
Task A | Task B
------------------+------------------
mmget_not_zero() |
| do_exit()
| exit_mm()
| mmput()
mmput() |
exit_mmap() |
remove_vma() |
fput() |
In this case, the work of ____fput() from Task B is queued up in Task A
as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup
work gets executed. However, Task A instead sleep, waiting for a reply
from Task B that never comes (it's dead).
This means the binder_deferred_release() is blocked until an unrelated
binder event forces Task A to go back to userspace. All the associated
death notifications will also be delayed until then.
In order to fix this use mmput_async() that will schedule the work in
the corresponding mm->async_put_work WQ instead of Task A.
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f489c2067c5824528212b0fc18b28d51332d906 upstream.
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70
Hardware name: linux,dummy-virt (DT)
Call trace:
zap_page_range_single+0x470/0x4b8
binder_alloc_free_page+0x608/0xadc
__list_lru_walk_one+0x130/0x3b0
list_lru_walk_node+0xc4/0x22c
binder_shrink_scan+0x108/0x1dc
shrinker_debugfs_scan_write+0x2b4/0x500
full_proxy_write+0xd4/0x140
vfs_write+0x1ac/0x758
ksys_write+0xf0/0x1dc
__arm64_sys_write+0x6c/0x9c
Allocated by task 492:
kmem_cache_alloc+0x130/0x368
vm_area_alloc+0x2c/0x190
mmap_region+0x258/0x18bc
do_mmap+0x694/0xa60
vm_mmap_pgoff+0x170/0x29c
ksys_mmap_pgoff+0x290/0x3a0
__arm64_sys_mmap+0xcc/0x144
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Cc: stable@vger.kernel.org
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com
[cmllamas: use find_vma() instead of vma_lookup() as commit ce6d42f2e4a2
is missing in v5.10. This only works because we check the vma against
our cached alloc->vma pointer.]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1090371e02b601cbfcea175c2a6cc7c955fa830 upstream.
Update the comments of binder_alloc_new_buf() to reflect that the return
value of the function is now ERR_PTR(-errno) on failure.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 57ada2fb2250 ("binder: add log information for binder transaction failures")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 122a3c1cb0ff304c2b8934584fcfea4edb2fe5e3 upstream.
Fix minor misspelling of the function in the comment section.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 0f966cba95c7 ("binder: add flag to clear buffer on txn complete")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ac061db9c58ca5b9270b1b3940d2464fb3ff183 upstream.
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f54 ("binder: check for binder_thread allocation failure in binder_poll()")
Cc: stable@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* This is never useful to us
Signed-off-by: LibXZR <xzr467706992@163.com>
Signed-off-by: Adithya R <gh0strider.2k18.reborn@gmail.com>
Signed-off-by: forenche <prahul2003@gmail.com>
In binder, using GFP_HIGHMEM will result in the allocated memory
not to be mapped in the kernel's virtual address space.
This prevents the kernel from being capable of directly
referring it.
Change-Id: I952dbc8ae205e47fa00ddf186ef306903f623367
Signed-off-by: Panchajanya1999 <panchajanya@azure-dev.live>
Signed-off-by: Jebaitedneko <Jebaitedneko@gmail.com>
According to Google we should set this to 0
as there is excessive logging in specific usecases
which has a negative impact on latency.
Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
Change-Id: Id619335848802e9d9a9bc13100d09a2cadbab07a
