[ Upstream commit 0f0639b4d6f649338ce29c62da3ec0787fa08cd1 ]
This fixes attempting to access past ethhdr.h_source, although it seems
intentional to copy also the contents of h_proto this triggers
out-of-bound access problems with the likes of static analyzer, so this
instead just copy ETH_ALEN and then proceed to use put_unaligned to copy
h_proto separetely.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b39e2dc7017ac667b70bdeee5293e410fab2fb ]
nft_counter_reset() resets the counter by subtracting the previously
retrieved value from the counter. This is a write operation on the
counter and as such it requires to be performed with a write sequence of
nft_counter_seq to serialize against its possible reader.
Update the packets/ bytes within write-sequence of nft_counter_seq.
Fixes: d84701ecbcd6a ("netfilter: nft_counter: rework atomic dump and reset")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3e33fcc38f7750604b065c55a43e94c5bc3145 ]
GRO code checks for matching layer 2 headers to see, if packet belongs
to the same flow and because ip6 tunnel set dev->hard_header_len
this check fails in cases, where it shouldn't. To fix this don't
set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c
does.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When commit 390390240145 ("nfsd: don't allow nfsd threads to be
signalled.") is backported to 5.10, it was adjusted considering commit
3feac2b55293 ("sunrpc: exclude from freezer when waiting for requests:").
However, 3feac2b55293 is based on commit f6e70aab9dfe ("SUNRPC: refresh
rq_pages using a bulk page allocator"), which converted page-by-page
allocation to a batch allocation, so schedule_timeout() is placed
un-nested.
As a result, the backported commit 7229200f6866 ("nfsd: don't allow nfsd
threads to be signalled.") placed freezable_schedule_timeout() in the wrong
place.
Now, freezable_schedule_timeout() is called after every successful page
allocation, and we see 30%+ performance regression on 5.10.220 in our
test suite.
Let's move it to the correct place so that freezable_schedule_timeout()
is called only when page allocation fails.
Fixes: 7229200f6866 ("nfsd: don't allow nfsd threads to be signalled.")
Reported-by: Hughdan Liu <hughliu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a1f596ebb23eadc0f9b95a8012e18ef76295fc8 upstream.
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Looking only at the 'backup' flag can make sense in some cases, but it
is not the behaviour of the default packet scheduler when selecting
paths.
As explained in the commit b6a66e521a20 ("mptcp: sched: check both
directions for backup"), the packet scheduler should look at both flags,
because that was the behaviour from the beginning: the 'backup' flag was
set by accident instead of the 'request_bkup' one. Now that the latter
has been fixed, get_retrans() needs to be adapted as well.
Fixes: b6a66e521a20 ("mptcp: sched: check both directions for backup")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1acf1ac84d2ae97b7889b87223c1064df850069 upstream.
Functions rds_still_queued and rds_clear_recv_queue lock a given socket
in order to safely iterate over the incoming rds messages. However
calling rds_inc_put while under this lock creates a potential deadlock.
rds_inc_put may eventually call rds_message_purge, which will lock
m_rs_lock. This is the incorrect locking order since m_rs_lock is
meant to be locked before the socket. To fix this, we move the message
item to a local list or variable that wont need rs_recv_lock protection.
Then we can safely call rds_inc_put on any item stored locally after
rs_recv_lock is released.
Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Reported-by: syzbot+f9db6ff27b9bfdcfeca0@syzkaller.appspotmail.com
Reported-by: syzbot+dcd73ff9291e6d34b3ab@syzkaller.appspotmail.com
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240209022854.200292-1-allison.henderson@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ]
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb65
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d01 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit e93fa44f0714 ("mptcp: fix duplicate data handling"), the logic
could potentially end up testing the variable 'incr' without first
setting it. clang properly catches this error, but gcc doesn't, and
it's gone unnoticed upstream as well.
Fix this up by initializing the variable, which resolves the build.
Note that for GKI kernels, none of this matters as mptcp is not enabled
for that build.
Fixes: e93fa44f0714 ("mptcp: fix duplicate data handling")
Change-Id: Ia619c1f9fed70f39b29cfdbd3143e0480fd2199d
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 871019b22d1bcc9fab2d1feba1b9a564acbb6e99 upstream.
We've started to see the following kernel traces:
WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0
Call Trace:
<IRQ>
__bpf_skc_lookup+0x10d/0x120
bpf_sk_lookup+0x48/0xd0
bpf_sk_lookup_tcp+0x19/0x20
bpf_prog_<redacted>+0x37c/0x16a3
cls_bpf_classify+0x205/0x2e0
tcf_classify+0x92/0x160
__netif_receive_skb_core+0xe52/0xf10
__netif_receive_skb_list_core+0x96/0x2b0
napi_complete_done+0x7b5/0xb70
<redacted>_poll+0x94/0xb0
net_rx_action+0x163/0x1d70
__do_softirq+0xdc/0x32e
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x36/0x50
do_softirq+0x44/0x70
__inet_hash can race with lockless (rcu) readers on the other cpus:
__inet_hash
__sk_nulls_add_node_rcu
<- (bpf triggers here)
sock_set_flag(SOCK_RCU_FREE)
Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.
More details from Eric regarding SOCK_RCU_FREE timeline:
Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.
Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Resolved conflict for 5.10 and below.]
Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b3a2a9c6349e25a025d2330f479bc33a6ccb54a upstream.
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e9683c9b6ca88cc9340cdca85edd6134c8cffe3 upstream.
Due to 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb41b195e634d3f1ecfcd845314e64fd4bb3c7aa upstream.
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b5768 ("mptcp: Add MPTCP socket stubs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ As mentioned above, conflicts were expected, and resolved by using the
'sed' command which is visible above. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab42f4d9a26f1723dcfd6c93fcf768032b2bb5e7 ]
We check for the existence of ->sv_stats elsewhere except in the core
processing code. It appears that only nfsd actual exports these values
anywhere, everybody else just has a write only copy of sv_stats in their
svc_program. Add a check for ->sv_stats before every adjustment to
allow us to eliminate the stats struct from all the users who don't
report the stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48e50dcbcbaaf713d82bf2da5c16aeced94ad07d upstream.
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.c, because quite a bit of new code has been
added around since commit 86e39e04482b ("mptcp: keep track of local
endpoint still available for each msk"), and commit 2843ff6f36db
("mptcp: remote addresses fullmesh"). But the issue is still there.
The conflicts have been resolved using the same way: by adding a new
parameter to select_local_address() and select_signal_address(), and
use it instead of the pointer they were previously returning. The code
is simpler in this version, this conflict resolution looks safe. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f094323867668d50124886ad884b665de7319537 ]
Since only one service actually reports the rpc stats there's not much
of a reason to have a pointer to it in the svc_program struct. Adjust
the svc_create_pooled function to take the sv_stats as an argument and
pass the struct through there as desired instead of getting it from the
svc_program->pg_stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 418b9687dece5bd763c09b5c27a801a7e3387be9 ]
nfsd is the only thing using this helper, and it doesn't use the private
currently. When we switch to per-network namespace stats we will need
the struct net * in order to get to the nfsd_net. Use the net as the
proc private so we can utilize this when we make the switch over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5decb2eb5f4d1f64ba9196b4bad0e26a441c81c ]
When space in the Reply chunk runs out in the middle of a segment,
we end up passing a zero-length SGL to rdma_rw_ctx_init(), and it
oopses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: ffc17e1479e8 ("platform/x86: dell-smbios: Fix error path in dell_smbios_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc1ca3348a74a1afaa7ffebc2b2f2cc149e11278 ]
All gro_receive() handlers are called from dev_gro_receive()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627b94f75b82d13d1530b59155a545fd99d807db ]
All gro_complete() handlers are called from napi_gro_complete()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee2ef946d3184e99077be526567d791c473036f ]
When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.
If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.
Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 626dfed5fa3bfb41e0dffd796032b555b69f9cde upstream.
When using a BPF program on kernel_connect(), the call can return -EPERM. This
causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing
the kernel to potentially freeze up.
Neil suggested:
This will propagate -EPERM up into other layers which might not be ready
to handle it. It might be safer to map EPERM to an error we would be more
likely to expect from the network system - such as ECONNREFUSED or ENETDOWN.
ECONNREFUSED as error seems reasonable. For programs setting a different error
can be out of reach (see handling in 4fbac77d2d09) in particular on kernels
which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err
instead of allow boolean"), thus given that it is better to simply remap for
consistent behavior. UDP does handle EPERM in xs_udp_send_request().
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Co-developed-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trondmy@kernel.org>
Cc: Anna Schumaker <anna@kernel.org>
Link: https://github.com/cilium/cilium/issues/33395
Link: https://lore.kernel.org/bpf/171374175513.12877.8993642908082014881@noble.neil.brown.name
Link: https://patch.msgid.link/9069ec1d59e4b2129fc23433349fd5580ad43921.1720075070.git.daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c07ff8592d57ed258afee5a5e04991a48dbaf382 ]
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.
There are two ways for the bug happen:
- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.
In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.
The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS.
Bug: 362391455
Fixes: 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240819175753.5151-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0486d31dd8198e22b63a4730244b38fffce6d469)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I390f02549c726e961f57daace468d5cd48468722
Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.
Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bug: 373245346
Bug: 333849117
Change-Id: I5a317e002f149cf9d399dce9bf87cd649a24da19
(cherry picked from commit a1e40ac5b5e9077fe1f7ae0eb88034db0f9ae1ab)
Signed-off-by: Lena Wang <lena.wang@mediatek.corp-partner.google.com>
(cherry picked from commit 42c2d1ea7c1bf984372f0ca1711d91165cbb87a6)
(cherry picked from commit 7376b8e51c4ddaa8e36b2b33d6ac3392135183b1)
commit 4e86729d1ff329815a6e8a920cb554a1d4cb5b8d upstream.
While by default max_autoclose equals to INT_MAX / HZ, one may set
net.sctp.max_autoclose to UINT_MAX. There is code in
sctp_association_init() that can consequently trigger overflow.
Cc: stable@vger.kernel.org
Fixes: 9f70f46bd4c7 ("sctp: properly latch and use autoclose value from sock to association")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241219162114.2863827-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 220bf000530f9b1114fa2a1022a871c7ce8a0b38 ]
In case we fail to resume, we'll WARN with
"Hardware became unavailable during restart." and we'll wait until user
space does something. It'll typically bring the interface down and up to
recover. This won't work though because the queues are still stopped on
IEEE80211_QUEUE_STOP_REASON_SUSPEND reason.
Make sure we clear that reason so that we give a chance to the recovery
to succeed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.cd628f560f97.I76a15fdb92de450e5329940125f3c58916be3942@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a024e377efed31ecfb39210bed562932321345b3 ]
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f678def99d29c520418607509bb19c7fc96a6db upstream.
Christoph Paasch reports [1] about incorrect skb->truesize
after skb_expand_head() call in ip6_xmit.
This may happen because of two reasons:
- skb_set_owner_w() for newly cloned skb is called too early,
before pskb_expand_head() where truesize is adjusted for (!skb-sk) case.
- pskb_expand_head() does not adjust truesize in (skb->sk) case.
In this case sk->sk_wmem_alloc should be adjusted too.
[1] https://lkml.org/lkml/2021/8/20/1082
Fixes: f1260ff15a71 ("skbuff: introduce skb_expand_head()")
Fixes: 2d85a1b31dde ("ipv6: ip6_finish_output2: set sk into newly allocated nskb")
Reported-by: Christoph Paasch <christoph.paasch@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/644330dd-477e-0462-83bf-9f514c41edd1@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ca2a1eeadf09862190b2810697702d803ceef2d upstream.
When the stream_verdict program returns SK_PASS, it places the received skb
into its own receive queue, but a recursive lock eventually occurs, leading
to an operating system deadlock. This issue has been present since v6.9.
'''
sk_psock_strp_data_ready
write_lock_bh(&sk->sk_callback_lock)
strp_data_ready
strp_read_sock
read_sock -> tcp_read_sock
strp_recv
cb.rcv_msg -> sk_psock_strp_read
# now stream_verdict return SK_PASS without peer sock assign
__SK_PASS = sk_psock_map_verd(SK_PASS, NULL)
sk_psock_verdict_apply
sk_psock_skb_ingress_self
sk_psock_skb_ingress_enqueue
sk_psock_data_ready
read_lock_bh(&sk->sk_callback_lock) <= dead lock
'''
This topic has been discussed before, but it has not been fixed.
Previous discussion:
https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch
Fixes: 6648e613226e ("bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue")
Reported-by: Vincent Whitchurch <vincent.whitchurch@datadoghq.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-2-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[srish: Apply to stable branch linux-5.10.y]
Signed-off-by: Srish Srinivasan <srishwap4@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e891b36de161fcd96f12ff83667473e5067b9037 ]
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.
Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit e891b36de161fcd96f12ff83667473e5067b9037)
Signed-off-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e415ed3a4b8b246ee5e9d109ff5153efcf96b9f2 ]
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate
a new skb if possible.
Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e415ed3a4b8b246ee5e9d109ff5153efcf96b9f2)
Signed-off-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1260ff15a71b8fc122b2c9abd8a7abffb6e0168 ]
Like skb_realloc_headroom(), new helper increases headroom of specified skb.
Unlike skb_realloc_headroom(), it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case
of failures.
This helps to simplify ip[6]_finish_output2() and a few other similar cases.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f1260ff15a71b8fc122b2c9abd8a7abffb6e0168)
Signed-off-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ecc4d858b92c1bb0673ad9c327298e600c55659 ]
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62df8 ("bpf: add bpf_skb_change_tail helper")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f89b3178d5448dd4457afbb98fc1ab99090a65 ]
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70b6f46a4ed8bd56c85ffff22df91e20e8c85e33 ]
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5b8ee5022a19464783058dc6042e8eefa34e8cd ]
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29e220d3c8edbf0e1beb0f028878a4a85966556 ]
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679e9ddcf90dbdf98aaaa71a492454654b627bcb ]
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a290 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5eb7de8cd58e73851cd37ff8d0666517d9926948 upstream.
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Artem Metla <ametla@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
