commit 77543269ff23c75bebfb8e6e9a1177b350908ea7 upstream.
Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.
Set up basic information and select proper builtin DTB for
Loongson-2K.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8de4ed75bd14ed197119ac509c6902a8561e0c1c upstream.
Include linux/processor.h to fix build error:
arch/mips/sgi-ip30/ip30-console.c: In function ‘prom_putchar’:
arch/mips/sgi-ip30/ip30-console.c:21:17: error: implicit declaration of function ‘cpu_relax’ [-Werror=implicit-function-declaration]
21 | cpu_relax();
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad97196379d0b8cb24ef3d5006978a6554e6467f upstream.
topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit
type, even if the underlying type is 64-bit, and so, if necessary, must
be cast to a larger type when calculations are done.
Fix a topa_entry->base address calculation by adding a cast.
Without the cast, the address was limited to 36-bits i.e. 64GiB.
The address calculation is used on systems that do not support Multiple
Entry ToPA (only Broadwell), and affects physical addresses on or above
64GiB. Instead of writing to the correct address, the address comprising
the first 36 bits would be written to.
Intel PT snapshot and sampling modes are not affected.
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5638bd722a44bbe97c1a7b3fae5b9efddb3e70ff upstream.
topa_entry->base needs to store a pfn. It obviously needs to be
large enough to store the largest possible x86 pfn which is
MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small.
Increase the size of topa_entry->base from 36 bits to 40 bits.
Note, systems where physical addresses can be 256TiB or more are affected.
[ Adrian: Amend commit message as suggested by Dave Hansen ]
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Marco Cavenati <cavenati.marco@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 322a569c4b4188a0da2812f9e952780ce09b74ba upstream.
Move the non-VMX chunk of the "interrupt blocked" checks to a separate
helper so that KVM can reuse the code to detect if interrupts are blocked
for L2, e.g. to determine if a virtual interrupt _for L2_ is a valid wake
event. If L1 disables HLT-exiting for L2, nested APICv is enabled, and L2
HLTs, then L2 virtual interrupts are valid wake events, but if and only if
interrupts are unblocked for L2.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d8491d3e726984343dd8c3cdbe2f2b47cfdd928 upstream.
On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt
storm coming from the accelerator board causes the machine to crash in
local_irq_enable() or auto_irq_enable(). Disabling interrupts for the
Warp1260 in amiga_parse_bootinfo() fixes the problem.
Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local
Cc: stable <stable@kernel.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14196e47c5ffe32af7ed5a51c9e421c5ea5bccce ]
In the xmon disassembly code there are several CPU feature checks to
determine what dialects should be passed to the disassembler. The
dialect controls which instructions the disassembler will recognise.
Unfortunately the checks are incorrect, because instead of passing a
single CPU feature they are passing a mask of feature bits.
For example the code:
if (cpu_has_feature(CPU_FTRS_POWER5))
dialect |= PPC_OPCODE_POWER5;
Is trying to check if the system is running on a Power5 CPU. But
CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on
a Power5.
In practice the test will always return true for any 64-bit CPU, because
at least one bit in the mask will be present in the CPU_FTRS_ALWAYS
mask.
Similarly for all the other checks against CPU_FTRS_xx masks.
Rather than trying to match the disassembly behaviour exactly to the
current CPU, just differentiate between 32-bit and 64-bit, and Altivec,
VSX and HTM.
That will cause some instructions to be shown in disassembly even
on a CPU that doesn't support them, but that's OK, objdump -d output
has the same behaviour, and if anything it's less confusing than some
instructions not being disassembled.
Fixes: 897f112bb42e ("[POWERPC] Import updated version of ppc disassembly code for xmon")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509121248.270878-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89c7f5078935872cf47a713a645affb5037be694 ]
This does not matter the least, but there is no other .[ch] file in the
repo that is executable, so clean this up.
Fixes: 29b83a64df3b ("MIPS: Octeon: Add PCIe link status check")
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c3ea1ec96307dbfbb2f16d96c674c5cc80f445 ]
Remove the unused cif_stack argument and add a protype in oplib_64.h
Commit ef3e035c3a9b ("sparc64: Fix register corruption in top-most
kernel stack frame during boot.") removed the cif_stack argument to
prom_cif init in the declaration at the caller site and the usage of it
within prom_cif_init, but not in the function signature of the function
itself.
This also fixes the following warning:
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’
Fixes: ef3e035c3a9b ("sparc64: Fix register corruption in top-most kernel stack frame during boot.")
Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3520b251dcae2b4a27b95cd6f745c54fd658bda5 ]
Currently, perf allocates an array of page pointers which is limited in
size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer
size to 2GiB. Should that limitation be lifted, the Intel PT driver can
support larger sizes, except for one calculation in
pt_topa_entry_for_page(), which is limited to 32-bits.
Fix pt_topa_entry_for_page() address calculation by adding a cast.
Fixes: 39152ee51b77 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78ab3d352f2982bf3f7e506bfbaba7afee1ed8a9 ]
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.
Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.
Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240628180852.1738922-2-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 726d8c965bae2d7468445d990849e281dca8cbf7 ]
The audio driver should not use a hardwired gpio number
from the header. Change it to use a lookup table.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 78ab3d352f29 ("ARM: spitz: fix GPIO assignment for backlight")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21b9e722ad28c19c2bc83f18f540b3dbd89bf762 ]
The return value of __invalid_xchg_size() is assigned to tmp instead of
the return variable x. Assign it to x instead.
Fixes: 2501cf768e4009a0 ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer")
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f70065a9fd988983b2c693631b801f25a615fc04 ]
Avoid freeze on Atari TT / MegaSTe boot with continuous messages of:
unexpected interrupt from 112
Which was due to VBL interrupt being enabled in SCU sys mask, but there
being no handler for that any more.
(Bug and fix were first verified on real Atari TT HW by Christian,
this patch later on in Hatari emulator.)
Fixes: 1fa0b29f3a43f9dd ("fbdev: Kill Atari vblank cursor blinking")
Reported-by: Nicolas Pomarède <npomarede@corp.free.fr>
Closes: https://listengine.tuxfamily.org/lists.tuxfamily.org/hatari-devel/2024/06/msg00016.html
Closes: https://lore.kernel.org/all/9aa793d7-82ed-4fbd-bce5-60810d8a9119@helsinkinet.fi
Tested-by: Christian Zietz <czietz@gmx.net>
Signed-off-by: Eero Tamminen <oak@helsinkinet.fi>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20240624144901.5236-1-oak@helsinkinet.fi
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74e1c956a68a65d642447d852e95b3fbb69bebaa ]
There is a comment in the imx6q variant dtsi claiming that these
modules will have one more chip select than the imx6dl variant.
This is wrong. Ordinary GPIOs are used for chip selects and both
variants of the module share the very same PCB and both have this
GPIO routed to the SPI0_CS1# pin of the SMARC connector.
Fix it by moving the third chip select description to the common dtsi.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b972d6b3b46345023aee56a95df8e2c137aa4ee4 ]
On i.MX6 the board is reset by the watchdog. But in turn to do a
complete board reset, we have to assert the WDOG_B output which is
routed also to the CPLD which then do a complete power-cycle of the
board.
Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edfea889a049abe80f0d55c0365bf60fbade272f ]
The PHY reset line is connected to both the SoC (GPIO1_25) and
the CPLD. We must not use the GPIO1_25 as it will drive against
the output buffer of the CPLD. Instead there is another GPIO
(GPIO2_01), an input to the CPLD, which will tell the CPLD to
assert the PHY reset line.
Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module")
Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 ]
Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios
property. The reset-assert-us value is taken from the existing logic
since the fec driver will add an 1ms assert delay per default if
phy-reset-gpios is used and phy-reset-duration is not specified.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: edfea889a049 ("ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7821fa101eab529521aa4b724bf708149d70820c ]
iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword()
that return PCIBIOS_* codes but functions also return -ENODEV which are
not compatible error codes. As neither of the functions are related to
PCI read/write functions, they should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9d7b435dfaec58432f4106aaa632bf39f52ce9f ]
xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240527125538.13620-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724852059e97c48557151b3aa4af424614819752 ]
intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 5b395e2be6c4 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240527125538.13620-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec0b4c4d45cf7cf9a6c9626a494a89cb1ae7c645 ]
x86_of_pci_irq_enable() returns PCIBIOS_* code received from
pci_read_config_byte() directly and also -EINVAL which are not
compatible error types. x86_of_pci_irq_enable() is used as
(*pcibios_enable_irq) function which should not return PCIBIOS_* codes.
Convert the PCIBIOS_* return code from pci_read_config_byte() into
normal errno using pcibios_err_to_errno().
Fixes: 96e0a0797eba ("x86: dtb: Add support for PCI devices backed by dtb nodes")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
With significant code churn, the 'read' result from callbench can
regress from 4000 ns to 7000 ns, despite no changes directly affecting
the code paths exercised by callbench. This can also happen when playing
with compiler options that affect the kernel's size.
Upon further investigation, it turns out that /dev/zero, which callbench
uses for its file benchmarks, makes heavy use of clear_user() when
accessed via read(). When the regression occurs, __arch_clear_user()
goes from being 16-byte aligned to being 4-byte aligned.
A recent upstream change to arm64's clear_user() implementation, commit
344323e0428b ("arm64: Rewrite __arch_clear_user()"), mentions this:
Apparently some folks examine large reads from /dev/zero closely enough
to notice the loop being hot, so align it per the other critical loops
(presumably around a typical instruction fetch granularity).
As such, make __arch_clear_user() 16-byte aligned to fix the regression
and match upstream.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
commit 24d3ba0a7b44c1617c27f5045eecc4f34752ab03 upstream.
The 32-bit ARM kernel stops working if the kernel grows to the point
where veneers for __get_user_* are created.
AAPCS32 [1] states, "Register r12 (IP) may be used by a linker as a
scratch register between a routine and any subroutine it calls. It
can also be used within a routine to hold intermediate values between
subroutine calls."
However, bl instructions buried within the inline asm are unpredictable
for compilers; hence, "ip" must be added to the clobber list.
This becomes critical when veneers for __get_user_* are created because
veneers use the ip register since commit 02e541db0540 ("ARM: 8323/1:
force linker to use PIC veneers").
[1]: https://github.com/ARM-software/abi-aa/blob/2023Q1/aapcs32/aapcs32.rst
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1216e62d039bf63a539bbe718536ec789a853dd ]
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240617140240.580453-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5679a0aae2d8cda72169452c32e5cb88a7ab33 ]
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a986fa57fd81a1430e00b3c6cf8a325d6f894a63 ]
Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().
It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.
Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.
With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:
BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Call Trace:
dump_stack_lvl+0xb4/0x108 (unreliable)
print_report+0x2b4/0x6ec
kasan_report+0x118/0x2b0
__asan_load4+0xb8/0xd0
kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
kvm_vfio_set_attr+0x524/0xac0 [kvm]
kvm_device_ioctl+0x144/0x240 [kvm]
sys_ioctl+0x62c/0x1810
system_call_exception+0x190/0x440
system_call_vectored_common+0x15c/0x2ec
...
Freed by task 0:
...
kfree+0xec/0x3e0
release_spapr_tce_table+0xd4/0x11c [kvm]
rcu_core+0x568/0x16a0
handle_softirqs+0x23c/0x920
do_softirq_own_stack+0x6c/0x90
do_softirq_own_stack+0x58/0x90
__irq_exit_rcu+0x218/0x2d0
irq_exit+0x30/0x80
arch_local_irq_restore+0x128/0x230
arch_local_irq_enable+0x1c/0x30
cpuidle_enter_state+0x134/0x5cc
cpuidle_enter+0x6c/0xb0
call_cpuidle+0x7c/0x100
do_idle+0x394/0x410
cpu_startup_entry+0x60/0x70
start_secondary+0x3fc/0x410
start_secondary_prolog+0x10/0x14
Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.
With the fix in place the test case no longer triggers the UAF.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8ff059b8531f3b98e14f0461859fc7cdd95823e4 upstream.
Move some EFI related declarations that are only referenced on IA64 to
a new asm/efi.h arch header.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Frank Scheiner <frank.scheiner@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The linux-5.10-y backport of commit b377c66ae350 ("x86/retpoline: Add
NOENDBR annotation to the SRSO dummy return thunk") misplaced the new
NOENDBR annotation, repeating the annotation on __x86_return_thunk,
rather than adding the annotation to the !CONFIG_CPU_SRSO version of
srso_alias_untrain_ret, as intended.
Move the annotation to the right place.
Fixes: 0bdc64e9e716 ("x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7278a8fb8d032dfdc03d9b5d17e0bc451cdc1492 ]
Without __unitialized, the following code is generated when
INIT_STACK_ALL_ZERO is enabled:
86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15)
8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15)
92: c0 10 00 00 00 08 larl %r1, 0xa2
98: e3 10 f0 a8 00 24 stg %r1, 168(%r15)
9e: b2 b2 f0 a0 lpswe 160(%r15)
The xc is not adding any security because psw is fully initialized
with the following instructions. Add __unitialized to the psw
definitiation to avoid the superfluous clearing of psw.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8873aab8646194a4446117bb617cc71bddda2dee ]
All these commands end up peeking into the PACA using the user
originated cpu id as an index. Check the cpu id is valid in order
to prevent xmon to crash. Instead of printing an error, this follows
the same behavior as the "lp s #" command : ignore the buggy cpu id
parameter and fall back to the #-less version of the command.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/161531347060.252863.10490063933688958044.stgit@bahia.lan
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be140f1732b523947425aaafbe2e37b41b622d96 ]
There is code that builds with calls to IO accessors even when
CONFIG_PCI=n, but the actual calls are guarded by runtime checks.
If not those calls would be faulting, because the page at virtual
address zero is (usually) not mapped into the kernel. As Arnd pointed
out, it is possible a large port value could cause the address to be
above mmap_min_addr which would then access userspace, which would be
a bug.
To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That
is a value chosen to point into unmapped space between the kernel and
userspace, so any access will always fault.
Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an
effect on 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cca46f811d0000c1522a5e18ea48c27a15e45c05 ]
'#sound-dai-cells' is required to properly interpret
the list of DAI specified in the 'sound-dai' property,
so add them to the 'hdmi' node for 'rk3066a.dtsi'.
Fixes: fadc78062477 ("ARM: dts: rockchip: add rk3066 hdmi nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/8b229dcc-94e4-4bbc-9efc-9d5ddd694532@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Commit 75dde792d6f6c2d0af50278bd374bf0c512fe196 upstream ]
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef6523475f ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit d85e3e34940788578eeffd94e8b7e1d28e7278e9 upstream ]
Currently, the EFI_PARAVIRT flag is only used by Xen dom0 boot on x86,
even though other architectures also support pseudo-EFI boot, where the
core kernel is invoked directly and provided with a set of data tables
that resemble the ones constructed by the EFI stub, which never actually
runs in that case.
Let's fix this inconsistency, and always set this flag when booting dom0
via the EFI boot path. Note that Xen on x86 does not provide the EFI
memory map in this case, whereas other architectures do, so move the
associated EFI_PARAVIRT check into the x86 platform code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit fdc6d38d64a20c542b1867ebeb8dd03b98829336 upstream ]
The EFI memory map is a description of the memory layout as provided by
the firmware, and only x86 manipulates it in various different ways for
its own memory bookkeeping. So let's move the memmap routines that are
only used by x86 into the x86 arch tree.
[ardb: minor tweaks for linux-5.10.y backport]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3882564a77c21eb746ba5364f3fa89b88de3d61 upstream.
Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.
This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc827 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.
Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.
Cc: stable@vger.kernel.org
Fixes: 48166e6ea47d ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 896842284c6ccba25ec9d78b7b6e62cdd507c083 upstream.
fadvise64_64() has two 64-bit arguments at the wrong alignment
for hexagon, which turns them into a 7-argument syscall that is
not supported by Linux.
The downstream musl port for hexagon actually asks for a 6-argument
version the same way we do it on arm, csky, powerpc, so make the
kernel do it the same way to avoid having to change both.
Link: https://github.com/quic/musl/blob/hexagon/arch/hexagon/syscall_arch.h#L78
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3339b99ef6fe38dac43b534cba3a8a0e29fb2eff upstream.
Both of these architectures require u64 function arguments to be
passed in even/odd pairs of registers or stack slots, which in case of
sync_file_range would result in a seven-argument system call that is
not currently possible. The system call is therefore incompatible with
all existing binaries.
While it would be possible to implement support for seven arguments
like on mips, it seems better to use a six-argument version, either
with the normal argument order but misaligned as on most architectures
or with the reordered sync_file_range2() calling conventions as on
arm and powerpc.
Cc: stable@vger.kernel.org
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 093d9603b60093a9aaae942db56107f6432a5dca ]
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
31679f38d886 ("Simplify profile_pc on x86-64")
and a code unification from 2009:
ef4512882dbe ("x86: time_32/64.c unify profile_pc")
but the basics of this thing actually goes back to before the git tree.
Link: https://syzkaller.appspot.com/bug?extid=84fe685c02cd112a2ac3 [1]
Link: https://lore.kernel.org/all/CAK55_s7Xyq=nh97=K=G1sxueOFrJDAvPOJAL4TPTCAYvmxO9_A@mail.gmail.com/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a50787349fadf66ac5c48f62e58d753878d2bb ]
Johannes missed parisc back when he introduced the compat version
of these syscalls, so receiving cmsg messages that require a compat
conversion is still broken.
Use the correct calls like the other architectures do.
Fixes: 1dacc76d0014 ("net/compat/wext: send different messages to compat tasks")
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6fbd26fb872ec518d25433a12e8ce8163e20909 ]
sparc has the wrong compat version of recv() and recvfrom() for both the
direct syscalls and socketcall().
The direct syscalls just need to use the compat version. For socketcall,
the same thing could be done, but it seems better to completely remove
the custom assembler code for it and just use the same implementation that
everyone else has.
Fixes: 1dacc76d0014 ("net/compat/wext: send different messages to compat tasks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
