commit c128a1b0523b685c8856ddc0ac0e1caef1fdeee5 upstream.
Errata i2310[0] says, Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts.
Commit 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310")
which added the workaround but missed ensuring RX FIFO is really empty
before applying the errata workaround as recommended in the errata text.
Fix this by adding back check for UART_OMAP_RX_LVL to be 0 for
workaround to take effect.
[0] https://www.ti.com/lit/pdf/sprz536 page 23
Fixes: 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310")
Cc: stable@vger.kernel.org
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Closes: https://lore.kernel.org/all/e96d0c55-0b12-4cbf-9d23-48963543de49@ti.com/
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240625160725.2102194-1-u-kumar1@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit 75dde792d6f6c2d0af50278bd374bf0c512fe196 upstream ]
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef6523475f ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit d85e3e34940788578eeffd94e8b7e1d28e7278e9 upstream ]
Currently, the EFI_PARAVIRT flag is only used by Xen dom0 boot on x86,
even though other architectures also support pseudo-EFI boot, where the
core kernel is invoked directly and provided with a set of data tables
that resemble the ones constructed by the EFI stub, which never actually
runs in that case.
Let's fix this inconsistency, and always set this flag when booting dom0
via the EFI boot path. Note that Xen on x86 does not provide the EFI
memory map in this case, whereas other architectures do, so move the
associated EFI_PARAVIRT check into the x86 platform code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit fdc6d38d64a20c542b1867ebeb8dd03b98829336 upstream ]
The EFI memory map is a description of the memory layout as provided by
the firmware, and only x86 manipulates it in various different ways for
its own memory bookkeeping. So let's move the memmap routines that are
only used by x86 into the x86 arch tree.
[ardb: minor tweaks for linux-5.10.y backport]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Commit 1df4d1724baafa55e9803414ebcdf1ca702bc958 upstream ]
This patch fixes the spelling error in firmware/efi/memmap.c, changing
it to the correct word.
Signed-off-by: Zheng Zhi Yuan <kevinjone25@g.ncu.edu.tw>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c45fcf46ca2368dafe7e5c513a711a6f0f974308 upstream.
If period_ns is small, prd might well become 0. Catch that case because
otherwise with
regmap_write(priv->regmap, TIM_ARR, prd - 1);
a few lines down quite a big period is configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eeb25a09c5e0805d92e4ebd12c4b0ad0df1b0295 upstream.
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f434a ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d411c8ccc0137a612e0044489030a194ff5c843 upstream.
In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode().
Add a check to avoid null pointer dereference.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081029.2619437-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 996c3412a06578e9d779a16b9e79ace18125ab50 upstream.
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66edf3fb331b6c55439b10f9862987b0916b3726 upstream.
In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081828.2620794-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c92a8bd53f24d50c8cf4aba53bb75505b382fed upstream.
Most of the colfires have up to 5 UARTs but MCF54418 has up-to 10 !
Change the maximum value authorized.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Cc: stable <stable@kernel.org>
Fixes: 2545cf6e94b4 ("m68knommu: allow 4 coldfire serial ports")
Link: https://lore.kernel.org/r/20240620-upstream-uart-v1-1-a9d0d95fb19e@yoseli.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d141c1e615795eeb93cd35501ad144ee997a826 upstream.
As per Errata i2310[0], Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts, therefore apply Errata i2310 solution.
[0] https://www.ti.com/lit/pdf/sprz536 page 23
Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240619105903.165434-1-u-kumar1@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2eabb655a968b862bc0c31629a09f0fbf3c80d51 upstream.
Syzbot is still reporting quite an old issue [1] that occurs due to
incomplete checking of present usb endpoints. As such, wrong
endpoints types may be used at urb sumbitting stage which in turn
triggers a warning in usb_submit_urb().
Fix the issue by verifying that required endpoint types are present
for both in and out endpoints, taking into account cmd endpoint type.
Unfortunately, this patch has not been tested on real hardware.
[1] Syzbot report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
...
Call Trace:
cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649
cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760
cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209
usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055
cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:517 [inline]
really_probe+0x23c/0xcd0 drivers/base/dd.c:595
__driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747
driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777
__device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894
bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
__device_attach+0x228/0x4a0 drivers/base/dd.c:965
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
device_add+0xc2f/0x2180 drivers/base/core.c:3354
usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238
usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293
Reported-and-tested-by: syzbot+00c18ee8497dd3be6ade@syzkaller.appspotmail.com
Fixes: 902ffc3c707c ("USB: cxacru: Use a bulk/int URB to access the command endpoint")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240609131546.3932-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e587a7633dfee8987a999cf253f7c52a8e09276c upstream.
printer_read() and printer_write() guard against the race
against disable() by checking the dev->interface flag,
which in turn is guarded by a spinlock.
These functions, however, drop the lock on multiple occasions.
This means that the test has to be redone after reacquiring
the lock and before doing IO.
Add the tests.
This also addresses CVE-2024-25741
Fixes: 7f2ca14d2f9b9 ("usb: gadget: function: printer: Interface is disabled and returns error")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240620114039.5767-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd80731e5e9d1402cb2f85022a6abf9b1982ec5f upstream.
We need to treat super speed plus as super speed, not the default,
which is full speed.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240620093800.28901-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 058722ee350c0bdd664e467156feb2bf5d9cc271 upstream.
Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.
In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.
cc: stable@vger.kernel.org
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4241665e6ea063a9c1d734de790121a71db763fc upstream.
A read operation is happening as follows:
a) Set sensor to forced mode
b) Sensor measures values and update data registers and sleeps again
c) Read data registers
In the current implementation the read operation happens immediately
after the sensor is set to forced mode so the sensor does not have
the time to update properly the registers. This leads to the following
2 problems:
1) The first ever value which is read by the register is always wrong
2) Every read operation, puts the register into forced mode and reads
the data that were calculated in the previous conversion.
This behaviour was tested in 2 ways:
1) The internal meas_status_0 register was read before and after every
read operation in order to verify that the data were ready even before
the register was set to forced mode and also to check that after the
forced mode was set the new data were not yet ready.
2) Physically changing the temperature and measuring the temperature
This commit adds the waiting time in between the set of the forced mode
and the read of the data. The function is taken from the Bosch BME68x
Sensor API [1].
[1]: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L490
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240606212313.207550-5-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdd478c3ae98c3f13628e110dce9b6cfb0d9b3c8 upstream.
There are cases in the compensate functions of the driver that
there could be overflows of variables due to bit shifting ops.
These implications were initially discussed here [1] and they
were mentioned in log message of Commit 1b3bd8592780 ("iio:
chemical: Add support for Bosch BME680 sensor").
[1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archlinux/
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240606212313.207550-4-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b47c0fee73a810c4503c4a94ea34858a1d865bba upstream.
According to the BME68x Sensor API [1], the h6 calibration
data variable should be an unsigned integer of size 8.
[1]: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x_defs.h#L789
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240606212313.207550-3-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae1f7b93b52095be6776d0f34957b4f35dda44d9 upstream.
The IIO standard units are measured in kPa while the driver
is using hPa.
Apart from checking the userspace value itself, it is mentioned also
in the Bosch API [1] that the pressure value is in Pascal.
[1]: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x_defs.h#L742
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240606212313.207550-2-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2b86132955268b2a1703082fbc2d4832fc001b8 upstream.
The ret variable was not checked after iio_device_release_direct_mode(),
which could possibly cause errors
Fixes: c70df20e3159 ("iio: adc: ad7266: claim direct mode during sensor read")
Signed-off-by: Fernando Yang <hagisf@usp.br>
Link: https://lore.kernel.org/r/20240603180757.8560-1-hagisf@usp.br
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0cf81c73e4c6a4861128a8f27861176ec312af4e ]
The TI eQEP clock is both a functional and interface clock. Since it is
required for the device to function, we should be enabling it at probe.
Up to now, we've just been lucky that the clock was enabled by something
else on the system already.
Fixes: f213729f6796 ("counter: new TI eQEP driver")
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240621-ti-eqep-enable-clock-v2-1-edd3421b54d4@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab069ce125965a5e282f7b53b86aee76ab32975c upstream.
sdhci_check_ro() can call mmc_gpio_get_ro() while holding the sdhci
host->lock spinlock. That would be a problem if the GPIO access done by
mmc_gpio_get_ro() needed to sleep.
However, host->lock is not needed anyway. The mmc core ensures that host
operations do not race with each other, and asynchronous callbacks like the
interrupt handler, software timeouts, completion work etc, cannot affect
sdhci_check_ro().
So remove the locking.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd64f902b93fe9658b855b9892ae59ef6ea22b9 upstream.
mmc_of_parse() reads device property "wp-inverted" and sets
MMC_CAP2_RO_ACTIVE_HIGH if it is true. MMC_CAP2_RO_ACTIVE_HIGH is used
to invert a write-protect (AKA read-only) GPIO value.
sdhci_get_property() also reads "wp-inverted" and sets
SDHCI_QUIRK_INVERTED_WRITE_PROTECT which is used to invert the
write-protect value as well but also acts upon a value read out from the
SDHCI_PRESENT_STATE register.
Many drivers call both mmc_of_parse() and sdhci_get_property(),
so that both MMC_CAP2_RO_ACTIVE_HIGH and
SDHCI_QUIRK_INVERTED_WRITE_PROTECT will be set if the controller has
device property "wp-inverted".
Amend the logic in sdhci_check_ro() to allow for that possibility,
so that the write-protect value is not inverted twice.
Also do not invert the value if it is a negative error value. Note that
callers treat an error the same as not-write-protected, so the result is
functionally the same in that case.
Also do not invert the value if sdhci host operation ->get_ro() is used.
None of the users of that callback set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
directly or indirectly, but two do call mmc_gpio_get_ro(), so leave it to
them to deal with that if they ever set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
in the future.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebc4fc34eae8ddfbef49f2bdaced1bf4167ef80d upstream.
jmicron_pmos() and sdhci_pci_probe() use pci_{read,write}_config_byte()
that return PCIBIOS_* codes. The return code is then returned as is by
jmicron_probe() and sdhci_pci_probe(). Similarly, the return code is
also returned as is from jmicron_resume(). Both probe and resume
functions should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them the fix these issues.
Fixes: 7582041ff3d4 ("mmc: sdhci-pci: fix simple_return.cocci warnings")
Fixes: 45211e215984 ("sdhci: toggle JMicron PMOS setting")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240527132443.14038-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9919cce62f68e6ab68dc2a975b5dc670f8ca7d40 ]
linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.
For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.
Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.
And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.
Fixes: e588bb1eae31 ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa9b96e9a73e4ec1771492d0527bd5fc5ef9164 ]
Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken
DT due to any error this value can be any. Without this value validation
there can be out of chips->irqs array boundaries access in
davinci_gpio_probe().
Validate the obtained nirq value so that it won't exceed the maximum
number of IRQs per bank.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240618144344.16943-1-amishin@t-argos.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37ce99b77762256ec9fda58d58fd613230151456 ]
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.
Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae6a233092747e9652eb793d92f79d0820e01c6a ]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1] [2].
In this case, the memory allocated to store RADEONFB_CONN_LIMIT pointers
to "drm_connector" structures can be avoided. This is because this
memory area is never accessed.
Also, in the kzalloc function, it is preferred to use sizeof(*pointer)
instead of sizeof(type) due to the type of the variable can change and
one needs not change the former (unlike the latter).
At the same time take advantage to remove the "#if 0" block, the code
where the removed memory area was accessed, and the RADEONFB_CONN_LIMIT
constant due to now is never used.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddbf3204f600a4d1f153498f618369fca352ae00 ]
mbox_send_message() sends a u32 bit message, not a pointer to a message.
We only convert to a pointer type as a generic type. If we want to send
a dummy message of 0, then simply send 0 (NULL).
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325165507.30323-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17d1316de0d7dc1bdc5d6e3ad4efd30a9bf1a381 ]
Because the size passed to copy_from_user() cannot be known beforehand,
it needs to be checked during runtime with check_object_size. That makes
gcc believe that the content of sbuf can be used before init.
Fix:
./include/linux/thread_info.h:215:17: warning: ‘sbuf’ may be used uninitialized [-Wmaybe-uninitialized]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d33fe1714a44ff540629b149d8fab4ac6967585c ]
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240331053441.1276826-3-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1162bc2f8f5de7da23d18aa4b7fbd4e93c369c50 ]
The value of an arithmetic expression directory * master->erasesize is
subject to overflow due to a failure to cast operands to a larger data
type before perfroming arithmetic
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240315093758.20790-1-arefev@swemel.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a4e5c16382e871c01dd82b47e930fdce30406b ]
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad53f5f54f351e967128edbc431f0f26427172cf ]
The very first flush in any port will flush all learned addresses in all
ports. This can be observed by unplugging the cable from one port while
additional ports are connected and dumping the fdb entries.
This problem is caused by the initially wrong value programmed to the
REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and
SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when
ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit
takes effect and flushes all learned entries. After that call both bits
are reset and so the next port flush will not cause such problem again.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea4d4808e342ddf89ba24b93ffa2057005aaced ]
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b35e ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b4b1d1cec48ef4c26616c2fc4600b2c9fec05a ]
rk3328_pin_ctrl uses type of RK3288 which has a hack in
rockchip_pinctrl_suspend and rockchip_pinctrl_resume to restore GPIO6-C6
at assume, the hack is not applicable to RK3328 as GPIO6 is not even
exist in it. So use a dedicated pinctrl type to skip this hack.
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-4-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1450694e94657458395af886d2467d6ac3355af ]
Separate struct rockchip_pin_bank to pinctrl-rockchip.h file, which will
be used by gpio-rockchip driver in the future.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816011948.1118959-3-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 01b4b1d1cec4 ("pinctrl: rockchip: use dedicated pinctrl type for RK3328")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ef6914e0bf578357b4c906ffe6b26e7eedb8ccf ]
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8448a6c817c2aa6c6af785b1d45678bd5977e8d ]
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adec57ff8e66aee632f3dd1f93787c13d112b7a1 ]
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604085838.3344-1-hagarhem@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f0fad0382124e7e23b3c730fa78818c22c89c0a ]
The caller of this function treats all non-zero values as an error, so
the return value of i2c_master_recv() cannot be returned directly.
This fixes touch reporting when there are more than 6 active touches.
Fixes: ef536abd3afd1 ("Input: ili210x - define and use chip operations structure")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240523085624.2295988-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e79a10652bbd320649da705ca1ea0c04351af403 ]
A Rembrandt-based HP thin client is reported to have problems where
the NVME disk isn't present after resume from s2idle.
This is because the NVME disk wasn't put into D3 at suspend, and
that happened because the StorageD3Enable _DSD was missing in the BIOS.
As AMD's architecture requires that the NVME is in D3 for s2idle, adjust
the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT
advertises low power idle support.
This will ensure that any future products with this BIOS deficiency don't
need to be added to the allow list of overrides.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10b6b4a8ac6120ec36555fd286eed577f7632e3b ]
Picasso was the first APU that introduced s2idle support from AMD,
and it was predating before vendors started to use `StorageD3Enable`
in their firmware.
Windows doesn't have problems with this hardware and NVME so it was
likely on the list of hardcoded CPUs to use this behavior in Windows.
Add it to the list for Linux to avoid NVME resume issues.
Reported-by: Stuart Axon <stuaxo2@yahoo.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: e79a10652bbd ("ACPI: x86: Force StorageD3Enable on more products")
Signed-off-by: Sasha Levin <sashal@kernel.org>
