[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac5eecf481c29942eb9a862e758c0c8b68090c33 ]
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4ca369ca221bb7e06c725792ac107f0e48e82e7 upstream.
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
...
Call Trace:
<TASK>
nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
kthread+0x2f0/0x390
ret_from_fork+0x4b/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device's page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.
Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.
Link: https://lkml.kernel.org/r/20240530141556.4411-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 952b023f06a24b2ad6ba67304c4c84d45bea2f18 upstream.
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4.
Link: https://lkml.kernel.org/r/20240408082041.20925-3-glass.su@suse.com
Fixes: b25801038da5 ("ocfs2: Support xfs style space reservation ioctls")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8cb324277ee16f3eca3055b96fce4735a5a41c6 upstream.
The default atime related mount option is '-o realtime' which means file
atime should be updated if atime <= ctime or atime <= mtime. atime should
be updated in the following scenario, but it is not:
==========================================================
$ rm /mnt/testfile;
$ echo test > /mnt/testfile
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
$ sleep 5
$ cat /mnt/testfile > /dev/null
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
==========================================================
And the reason the atime in the test is not updated is that ocfs2 calls
ktime_get_real_ts64() in __ocfs2_mknod_locked during file creation. Then
inode_set_ctime_current() is called in inode_set_ctime_current() calls
ktime_get_coarse_real_ts64() to get current time.
ktime_get_real_ts64() is more accurate than ktime_get_coarse_real_ts64().
In my test box, I saw ctime set by ktime_get_coarse_real_ts64() is less
than ktime_get_real_ts64() even ctime is set later. The ctime of the new
inode is smaller than atime.
The call trace is like:
ocfs2_create
ocfs2_mknod
__ocfs2_mknod_locked
....
ktime_get_real_ts64 <------- set atime,ctime,mtime, more accurate
ocfs2_populate_inode
...
ocfs2_init_acl
ocfs2_acl_set_mode
inode_set_ctime_current
current_time
ktime_get_coarse_real_ts64 <-------less accurate
ocfs2_file_read_iter
ocfs2_inode_lock_atime
ocfs2_should_update_atime
atime <= ctime ? <-------- false, ctime < atime due to accuracy
So here call ktime_get_coarse_real_ts64 to set inode time coarser while
creating new files. It may lower the accuracy of file times. But it's
not a big deal since we already use coarse time in other places like
ocfs2_update_inode_atime and inode_set_ctime_current.
Link: https://lkml.kernel.org/r/20240408082041.20925-5-glass.su@suse.com
Fixes: c62c38f6b91b ("ocfs2: replace CURRENT_TIME macro")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cbcb62dddf5346077feb82b7b0c9254222d3445 upstream.
While taking a kernel core dump with makedumpfile on a larger system,
softlockup messages often appear.
While softlockup warnings can be harmless, they can also interfere with
things like RCU freeing memory, which can be problematic when the kdump
kexec image is configured with as little memory as possible.
Avoid the softlockup, and give things like work items and RCU a chance to
do their thing during __read_vmcore by adding a cond_resched.
Link: https://lkml.kernel.org/r/20240507091858.36ff767f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c55b78818cfb732680c4a72ab270cc2d2ee3d0f upstream.
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
Reported-by: syzbot+9dfe490c8176301c1d06@syzkaller.appspotmail.com
Cc: Dave Kleikamp <shaggy@kernel.org>
Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7373a51e7998b508af7136530f3a997b286ce81c ]
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page.
Link: https://lkml.kernel.org/r/20240604134255.7165-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+c8166c541d3971bf6c87@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8166c541d3971bf6c87
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a46acb3697e50548bb265afa1d79163659dd85 ]
In prepartion for switching from kmap() to kmap_local(), return the kmap
address from nilfs_get_page() instead of having the caller look up
page_address().
[konishi.ryusuke: fixed a missing blank line after declaration]
Link: https://lkml.kernel.org/r/20231127143036.2425-7-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7373a51e7998 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79ea65563ad8aaab309d61eeb4d5019dd6cf5fa0 ]
If read_mapping_page() encounters an error, it returns an errno, not a
page with PageError set, so this test is not needed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Stable-dep-of: 7373a51e7998 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb33eb2ef0d88e75564983ef057b44c5b7e4fded ]
Qgroup extent records are created when delayed ref heads are created and
then released after accounting extents at btrfs_qgroup_account_extents(),
called during the transaction commit path.
If a transaction is aborted we free the qgroup records by calling
btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(),
unless we don't have delayed references. We are incorrectly assuming
that no delayed references means we don't have qgroup extents records.
We can currently have no delayed references because we ran them all
during a transaction commit and the transaction was aborted after that
due to some error in the commit path.
So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at
btrfs_destroy_delayed_refs() even if we don't have any delayed references.
Reported-by: syzbot+0fecc032fa134afd49df@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000004e7f980619f91835@google.com/
Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6412e44c40aaf8f1d7320b2099c5bdd6cb9126ac ]
Commit bb4d53d66e4b ("NFSD: use (un)lock_inode instead of
fh_(un)lock for file operations") broke the NFSv3 pre/post op
attributes behaviour when doing a SETATTR rpc call by stripping out
the calls to fh_fill_pre_attrs() and fh_fill_post_attrs().
Fixes: bb4d53d66e4b ("NFSD: use (un)lock_inode instead of fh_(un)lock for file operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Message-ID: <20240216012451.22725-1-trondmy@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05eda6e75773592760285e10ac86c56d683be17f ]
It is possible for free_blocked_lock() to be called twice concurrently,
once from nfsd4_lock() and once from nfsd4_release_lockowner() calling
remove_blocked_locks(). This is why a kref was added.
It is perfectly safe for locks_delete_block() and kref_put() to be
called in parallel as they use locking or atomicity respectively as
protection. However locks_release_private() has no locking. It is
safe for it to be called twice sequentially, but not concurrently.
This patch moves that call from free_blocked_lock() where it could race
with itself, to free_nbl() where it cannot. This will slightly delay
the freeing of private info or release of the owner - but not by much.
It is arguably more natural for this freeing to happen in free_nbl()
where the structure itself is freed.
This bug was found by code inspection - it has not been seen in practice.
Fixes: 47446d74f170 ("nfsd4: add refcount for nfsd4_blocked_lock")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ea9a7c5fe4149f165f0e3b624fe08df02b6c301 ]
A recent change to check_for_locks() changed it to take ->flc_lock while
holding ->fi_lock. This creates a lock inversion (reported by lockdep)
because there is a case where ->fi_lock is taken while holding
->flc_lock.
->flc_lock is held across ->fl_lmops callbacks, and
nfsd_break_deleg_cb() is one of those and does take ->fi_lock. However
it doesn't need to.
Prior to v4.17-rc1~110^2~22 ("nfsd: create a separate lease for each
delegation") nfsd_break_deleg_cb() would walk the ->fi_delegations list
and so needed the lock. Since then it doesn't walk the list and doesn't
need the lock.
Two actions are performed under the lock. One is to call
nfsd_break_one_deleg which calls nfsd4_run_cb(). These doesn't act on
the nfs4_file at all, so don't need the lock.
The other is to set ->fi_had_conflict which is in the nfs4_file.
This field is only ever set here (except when initialised to false)
so there is no possible problem will multiple threads racing when
setting it.
The field is tested twice in nfs4_set_delegation(). The first test does
not hold a lock and is documented as an opportunistic optimisation, so
it doesn't impose any need to hold ->fi_lock while setting
->fi_had_conflict.
The second test in nfs4_set_delegation() *is* make under ->fi_lock, so
removing the locking when ->fi_had_conflict is set could make a change.
The change could only be interesting if ->fi_had_conflict tested as
false even though nfsd_break_one_deleg() ran before ->fi_lock was
unlocked. i.e. while hash_delegation_locked() was running.
As hash_delegation_lock() doesn't interact in any way with nfs4_run_cb()
there can be no importance to this interaction.
So this patch removes the locking from nfsd_break_one_deleg() and moves
the final test on ->fi_had_conflict out of the locked region to make it
clear that locking isn't important to the test. It is still tested
*after* vfs_setlease() has succeeded. This might be significant and as
vfs_setlease() takes ->flc_lock, and nfsd_break_one_deleg() is called
under ->flc_lock this "after" is a true ordering provided by a spinlock.
Fixes: edcf9725150e ("nfsd: fix RELEASE_LOCKOWNER")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edcf9725150e42beeca42d085149f4c88fa97afd ]
The test on so_count in nfsd4_release_lockowner() is nonsense and
harmful. Revert to using check_for_locks(), changing that to not sleep.
First: harmful.
As is documented in the kdoc comment for nfsd4_release_lockowner(), the
test on so_count can transiently return a false positive resulting in a
return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is
clearly a protocol violation and with the Linux NFS client it can cause
incorrect behaviour.
If RELEASE_LOCKOWNER is sent while some other thread is still
processing a LOCK request which failed because, at the time that request
was received, the given owner held a conflicting lock, then the nfsd
thread processing that LOCK request can hold a reference (conflock) to
the lock owner that causes nfsd4_release_lockowner() to return an
incorrect error.
The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it
never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so
it knows that the error is impossible. It assumes the lock owner was in
fact released so it feels free to use the same lock owner identifier in
some later locking request.
When it does reuse a lock owner identifier for which a previous RELEASE
failed, it will naturally use a lock_seqid of zero. However the server,
which didn't release the lock owner, will expect a larger lock_seqid and
so will respond with NFS4ERR_BAD_SEQID.
So clearly it is harmful to allow a false positive, which testing
so_count allows.
The test is nonsense because ... well... it doesn't mean anything.
so_count is the sum of three different counts.
1/ the set of states listed on so_stateids
2/ the set of active vfs locks owned by any of those states
3/ various transient counts such as for conflicting locks.
When it is tested against '2' it is clear that one of these is the
transient reference obtained by find_lockowner_str_locked(). It is not
clear what the other one is expected to be.
In practice, the count is often 2 because there is precisely one state
on so_stateids. If there were more, this would fail.
In my testing I see two circumstances when RELEASE_LOCKOWNER is called.
In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in
all the lock states being removed, and so the lockowner being discarded
(it is removed when there are no more references which usually happens
when the lock state is discarded). When nfsd4_release_lockowner() finds
that the lock owner doesn't exist, it returns success.
The other case shows an so_count of '2' and precisely one state listed
in so_stateid. It appears that the Linux client uses a separate lock
owner for each file resulting in one lock state per lock owner, so this
test on '2' is safe. For another client it might not be safe.
So this patch changes check_for_locks() to use the (newish)
find_any_file_locked() so that it doesn't take a reference on the
nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With
this check is it safe to restore the use of check_for_locks() rather
than testing so_count against the mysterious '2'.
Fixes: ce3c4ad7f4ce ("NFSD: Fix possible sleep during nfsd4_release_lockowner()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e6304169f1e1f078e7f0798033f80a7fb0ea46 ]
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a501f55cd641eb4d3c16a2eab0d678693fac663 ]
If write_ports_addfd or write_ports_addxprt fail, they call nfsd_put()
without calling nfsd_last_thread(). This leaves nn->nfsd_serv pointing
to a structure that has been freed.
So remove 'static' from nfsd_last_thread() and call it when the
nfsd_serv is about to be destroyed.
Fixes: ec52361df99b ("SUNRPC: stop using ->sv_nrthreads as a refcount")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88956eabfdea7d01d550535af120d4ef265b1d02 ]
If /proc/fs/nfsd/pool_stats is open when the last nfsd thread exits, then
when the file is closed a NULL pointer is dereferenced.
This is because nfsd_pool_stats_release() assumes that the
pointer to the svc_serv cannot become NULL while a reference is held.
This used to be the case but a recent patch split nfsd_last_thread() out
from nfsd_put(), and clearing the pointer is done in nfsd_last_thread().
This is easily reproduced by running
rpc.nfsd 8 ; ( rpc.nfsd 0;true) < /proc/fs/nfsd/pool_stats
Fortunately nfsd_pool_stats_release() has easy access to the svc_serv
pointer, and so can call svc_put() on it directly.
Fixes: 9f28a971ee9f ("nfsd: separate nfsd_last_thread() from nfsd_put()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f28a971ee9fdf1bf8ce8c88b103f483be610277 ]
Now that the last nfsd thread is stopped by an explicit act of calling
svc_set_num_threads() with a count of zero, we only have a limited
number of places that can happen, and don't need to call
nfsd_last_thread() in nfsd_put()
So separate that out and call it at the two places where the number of
threads is set to zero.
Move the clearing of ->nfsd_serv and the call to svc_xprt_destroy_all()
into nfsd_last_thread(), as they are really part of the same action.
nfsd_put() is now a thin wrapper around svc_put(), so make it a static
inline.
nfsd_put() cannot be called after nfsd_last_thread(), so in a couple of
places we have to use svc_put() instead.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18e4cf915543257eae2925671934937163f5639b ]
Previously a thread could exit asynchronously (due to a signal) so some
care was needed to hold nfsd_mutex over the last svc_put() call. Now a
thread can only exit when svc_set_num_threads() is called, and this is
always called under nfsd_mutex. So no care is needed.
Not only is the mutex held when a thread exits now, but the svc refcount
is elevated, so the svc_put() in svc_exit_thread() will never be a final
put, so the mutex isn't even needed at this point in the code.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3903902401451b1cd9d797a8c79769eb26ac7fe5 ]
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203a8 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7dbed457c2ef83709a2a2723a2d58de43623449 ]
In nfsd4_encode_fattr(), TIME_CREATE was being written out after all
other times. However, they should be written out in an order that
matches the bit flags in bmval1, which in this case are
#define FATTR4_WORD1_TIME_ACCESS (1UL << 15)
#define FATTR4_WORD1_TIME_CREATE (1UL << 18)
#define FATTR4_WORD1_TIME_DELTA (1UL << 19)
#define FATTR4_WORD1_TIME_METADATA (1UL << 20)
#define FATTR4_WORD1_TIME_MODIFY (1UL << 21)
so TIME_CREATE should come second.
I noticed this on a FreeBSD NFSv4.2 client, which supports creation
times. On this client, file times were weirdly permuted. With this
patch applied on the server, times looked normal on the client.
Fixes: e377a3e698fb ("nfsd: Add support for the birth time attribute")
Link: https://unix.stackexchange.com/q/749605/56202
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 665e89ab7c5af1f2d260834c861a74b01a30f95f ]
The below-mentioned patch was intended to simplify refcounting on the
svc_serv used by locked. The goal was to only ever have a single
reference from the single thread. To that end we dropped a call to
lockd_start_svc() (except when creating thread) which would take a
reference, and dropped the svc_put(serv) that would drop that reference.
Unfortunately we didn't also remove the svc_get() from
lockd_create_svc() in the case where the svc_serv already existed.
So after the patch:
- on the first call the svc_serv was allocated and the one reference
was given to the thread, so there are no extra references
- on subsequent calls svc_get() was called so there is now an extra
reference.
This is clearly not consistent.
The inconsistency is also clear in the current code in lockd_get()
takes *two* references, one on nlmsvc_serv and one by incrementing
nlmsvc_users. This clearly does not match lockd_put().
So: drop that svc_get() from lockd_get() (which used to be in
lockd_create_svc().
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/linux-nfs/ZHsI%2FH16VX9kJQX1@shredder/T/#u
Fixes: b73a2972041b ("lockd: move lockd_start_svc() call into lockd_create_svc()")
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c034203b6a9dae6751ef4371c18cb77983e30c28 ]
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423c4 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d53d70084d27f56bcdf5074328f2c9ec861be596 ]
notify_change can modify the iattr structure. In particular it can
end up setting ATTR_MODE when ATTR_KILL_SUID is already set, causing
a BUG() if the same iattr is passed to notify_change more than once.
Make a copy of the struct iattr before calling notify_change.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2207969
Tested-by: Zhi Li <yieli@redhat.com>
Fixes: 34b91dda7124 ("NFSD: Make nfsd4_setattr() wait before returning NFS4ERR_DELAY")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 147abcacee33781e75588869e944ddb07528a897 ]
The following request sequence to the same file causes the NFS client and
server getting into an infinite loop with COMMIT and NFS4ERR_DELAY:
OPEN
REMOVE
WRITE
COMMIT
Problem reported by recall11, recall12, recall14, recall20, recall22,
recall40, recall42, recall48, recall50 of nfstest suite.
This patch restores the handling of race condition in nfsd_file_do_acquire
with unlink to that prior of the regression.
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e4a6733f922f0fef1d0995f7b2d0eaff86c7ea ]
When queueing a dispose list to the appropriate "freeme" lists, it
pointlessly queues the objects one at a time to an intermediate list.
Remove a few helpers and just open code a list_move to make it more
clear and efficient. Better document the resulting functions with
kerneldoc comments.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4c649ab413ba6a785b25f0edbb12f617c87db2a ]
While we were converting the nfs4_file hashtable to use the kernel's
resizable hashtable data structure, Neil Brown observed that the
list variant (rhltable) would be better for managing nfsd_file items
as well. The nfsd_file hash table will contain multiple entries for
the same inode -- these should be kept together on a list. And, it
could be possible for exotic or malicious client behavior to cause
the hash table to resize itself on every insertion.
A nice simplification is that rhltable_lookup() can return a list
that contains only nfsd_file items that match a given inode, which
enables us to eliminate specialized hash table helper functions and
use the default functions provided by the rhashtable implementation).
Since we are now storing nfsd_file items for the same inode on a
single list, that effectively reduces the number of hash entries
that have to be tracked in the hash table. The mininum bucket count
is therefore lowered.
Light testing with fstests generic/531 show no regressions.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb779fcd4ed5984ad15991d574943d12a8693d1 ]
On most filesystems, there is no reason to delay reaping an nfsd_file
just because its underlying inode is still under writeback. nfsd just
relies on client activity or the local flusher threads to do writeback.
The main exception is NFS, which flushes all of its dirty data on last
close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to
signal that they do this, and only skip closing files under writeback on
such filesystems.
Also, remove a redundant NULL file pointer check in
nfsd_file_check_writeback, and clean up nfs's export op flag
definitions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2ff1bd71db2a1b193a6dde0845adcd69cbcf75e ]
The last thing that filp_close does is an fput, so don't bother taking
and putting the extra reference.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b680cb9b737331aad271feebbedafb865504e234 ]
David Howells mentioned that he found this bit of code confusing, so
sprinkle in some comments to clarify.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6593366c0bf222be9c7561354dfb921c611745e ]
An error from break_lease is non-fatal, so we needn't destroy the
nfsd_file in that case. Just put the reference like we normally would
and return the error.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d69b8dbfd0866abc5ec84652cc1c10fc3d4d91ef ]
test_bit returns bool, so we can just compare the result of that to the
key->gc value without the "!!".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c31e4c98853a4ba47355ea151b36a77c42b7734 ]
Since v4 files are expected to be long-lived, there's little value in
closing them out of the cache when there is conflicting access.
Change the comparator to also match the gc value in the key. Change both
of the current users of that key to set the gc value in the key to
"true".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15a8b55dbb1ba154d82627547c5761cac884d810 ]
For ops with "trivial" replies, nfsd4_encode_operation will shortcut
most of the encoding work and skip to just marshalling up the status.
One of the things it skips is calling op_release. This could cause a
memory leak in the layoutget codepath if there is an error at an
inopportune time.
Have the compound processing engine always call op_release, even when
op_func sets an error in op->status. With this change, we also need
nfsd4_block_get_device_info_scsi to set the gd_device pointer to NULL
on error to avoid a double free.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181403
Fixes: 34b1744c91cc ("nfsd4: define ->op_release for compound ops")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 804d8e0a6e54427268790472781e03bc243f4ee3 ]
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[].
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: f4f9ef4a1b0a ("nfsd4: opdesc will be useful outside nfs4proc.c")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c934dd8832dd40fd34776f916dc201e18b319b ]
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ff84910c66c9144cc0de9d9deed9fb84c03aff0 ]
Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd9a2e1d513823e840960cb3bc26d8b7749d4ac2 ]
Flole observes this WARNING on occasion:
[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0
Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e3831 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90d2175572470ba7f55da8447c72ddd4942923c4 ]
Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.
Fixes: 91d2e9b56cf5 ("NFSD: Clean up the nfsd_net::nfssvc_boot field")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c475eee02375ade6e864f1db16976ba0d96a0a2 ]
Most of the time, NFSv4 clients issue a COMMIT before the final CLOSE of
an open stateid, so with NFSv4, the fsync in the nfsd_file_free path is
usually a no-op and doesn't block.
We have a customer running knfsd over very slow storage (XFS over Ceph
RBD). They were using the "async" export option because performance was
more important than data integrity for this application. That export
option turns NFSv4 COMMIT calls into no-ops. Due to the fsync in this
codepath however, their final CLOSE calls would still stall (since a
CLOSE effectively became a COMMIT).
I think this fsync is not strictly necessary. We only use that result to
reset the write verifier. Instead of fsync'ing all of the data when we
free an nfsd_file, we can just check for writeback errors when one is
acquired and when it is freed.
If the client never comes back, then it'll never see the error anyway
and there is no point in resetting it. If an error occurs after the
nfsd_file is removed from the cache but before the inode is evicted,
then it will reset the write verifier on the next nfsd_file_acquire,
(since there will be an unseen error).
The only exception here is if something else opens and fsyncs the file
during that window. Given that local applications work with this
limitation today, I don't see that as an issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2166658
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-and-tested-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcd779dc46540e174a6ac8d52fbed23593407317 ]
The nested if statements here make no sense, as you can never reach
"else" branch in the nested statement. Fix the error handling for
when there is a courtesy client that holds a conflicting deny mode.
Fixes: 3d6942715180 ("NFSD: add support for share reservation conflict to courteous server")
Reported-by: 張智諺 <cc85nod@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81e722978ad21072470b73d8f6a50ad62c7d5b7d ]
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 826b67e6376c2a788e3a62c4860dcd79500a27d5 ]
We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.
What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.
Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.
The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.
This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34e8f9ec4c9ac235f917747b23a200a5e0ec857b ]
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ba434cb1a8d403ea9aad1b667c3ea3ad8b3191f ]
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df24ac7a2e3a9d0bc68f1756a880e50bfe4b4522 ]
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4102db175b5d884d133270fdbd0e59111ce688fc ]
The nfs4_file table is global, so shutting it down when a containerized
nfsd is shut down is wrong and can lead to double-frees. Tear down the
nfs4_file_rhltable in nfs4_state_shutdown instead of
nfs4_state_shutdown_net.
Fixes: d47b295e8d76 ("NFSD: Use rhashtable for managing nfs4_file objects")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2169017
Reported-by: JianHong Yin <jiyin@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bdbba54e9b1c769da8ded9abd209d765715e1d6 ]
nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.
Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-by: Torkil Svensgaard <torkil@drcmr.dk>
Reported-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c24fa225081f31bc6da6a355c1ba801889ab29a ]
Since nfsd4_state_shrinker_count always calls mod_delayed_work with
0 delay, we can replace delayed_work with work_struct to save some
space and overhead.
Also add the call to cancel_work after unregister the shrinker
in nfs4_state_shutdown_net.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f385f7d244134246f984975ed34cd75f77de479f ]
Currently the nfsd-client shrinker is registered and unregistered at
the time the nfsd module is loaded and unloaded. The problem with this
is the shrinker is being registered before all of the relevant fields
in nfsd_net are initialized when nfsd is started. This can lead to an
oops when memory is low and the shrinker is called while nfsd is not
running.
This patch moves the register/unregister of nfsd-client shrinker from
module load/unload time to nfsd startup/shutdown time.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
[ cel: adjusted to apply without e33c267ab70d ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6cf91b7b47ff82b624bdfe2fdcde32bb52e71dd ]
If signal_pending() returns true, schedule_timeout() will not be executed,
causing the waiting task to remain in the wait queue.
Fixed by adding a call to finish_wait(), which ensures that the waiting
task will always be removed from the wait queue.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5304930dbae82d259bcf7e5611db7c81e7a42eff ]
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Fixes: 9315564747cb ("NFSD: Use only RQ_DROPME to signal the need to drop a reply")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7827c81f0248e3c2f40d438b020f3d222f002171 ]
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Found via KCSAN.
Fixes: 28df0988815f ("SUNRPC: Use RMW bitops in single-threaded hot paths")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b3a551fa58b4da941efeb209b3770868e2eddd7 ]
Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a
regular NFSv4 file") added the ability to cache an open fd over a
compound. There are a couple of problems with the way this currently
works:
It's racy, as a newly-created nfsd_file can end up with its PENDING bit
cleared while the nf is hashed, and the nf_file pointer is still zeroed
out. Other tasks can find it in this state and they expect to see a
valid nf_file, and can oops if nf_file is NULL.
Also, there is no guarantee that we'll end up creating a new nfsd_file
if one is already in the hash. If an extant entry is in the hash with a
valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with
the value of op_file and the old nf_file will leak.
Fix both issues by making a new nfsd_file_acquirei_opened variant that
takes an optional file pointer. If one is present when this is called,
we'll take a new reference to it instead of trying to open the file. If
the nfsd_file already has a valid nf_file, we'll just ignore the
optional file and pass the nfsd_file back as-is.
Also rework the tracepoints a bit to allow for an "opened" variant and
don't try to avoid counting acquisitions in the case where we already
have a cached open file.
Fixes: fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file")
Cc: Trond Myklebust <trondmy@hammerspace.com>
Reported-by: Stanislav Saner <ssaner@redhat.com>
Reported-and-Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-and-Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac3a2585f018f10039b4a856dcb122da88c1c1c9 ]
The filecache refcounting is a bit non-standard for something searchable
by RCU, in that we maintain a sentinel reference while it's hashed. This
in turn requires that we have to do things differently in the "put"
depending on whether its hashed, which we believe to have led to races.
There are other problems in here too. nfsd_file_close_inode_sync can end
up freeing an nfsd_file while there are still outstanding references to
it, and there are a number of subtle ToC/ToU races.
Rework the code so that the refcount is what drives the lifecycle. When
the refcount goes to zero, then unhash and rcu free the object. A task
searching for a nfsd_file is allowed to bump its refcount, but only if
it's not already 0. Ensure that we don't make any other changes to it
until a reference is held.
With this change, the LRU carries a reference. Take special care to deal
with it when removing an entry from the list, and ensure that we only
repurpose the nf_lru list_head when the refcount is 0 to ensure
exclusive access to it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e78e274eb22d966258a3845acc71d3c5b8ee2ea8 ]
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
There were 97 warnings produced by NFS. For example:
fs/nfsd/nfs4xdr.c:2228:17: warning: cast from '__be32 (*)(struct nfsd4_compoundargs *, struct nfsd4_access *)' (aka 'unsigned int (*)(struct nfsd4_compoundargs *, struct nfsd4_access *)') to 'nfsd4_dec' (aka 'unsigned int (*)(struct nfsd4_compoundargs *, void *)') converts to incompatible function type [-Wcast-function-type-strict]
[OP_ACCESS] = (nfsd4_dec)nfsd4_decode_access,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The enc/dec callbacks were defined as passing "void *" as the second
argument, but were being implicitly cast to a new type. Replace the
argument with union nfsd4_op_u, and perform explicit member selection
in the function body. There are no resulting binary differences.
Changes were made mechanically using the following Coccinelle script,
with minor by-hand fixes for members that didn't already match their
existing argument name:
@find@
identifier func;
type T, opsT;
identifier ops, N;
@@
opsT ops[] = {
[N] = (T) func,
};
@already_void@
identifier find.func;
identifier name;
@@
func(...,
-void
+union nfsd4_op_u
*name)
{
...
}
@proto depends on !already_void@
identifier find.func;
type T;
identifier name;
position p;
@@
func@p(...,
T name
) {
...
}
@script:python get_member@
type_name << proto.T;
member;
@@
coccinelle.member = cocci.make_ident(type_name.split("_", 1)[1].split(' ',1)[0])
@convert@
identifier find.func;
type proto.T;
identifier proto.name;
position proto.p;
identifier get_member.member;
@@
func@p(...,
- T name
+ union nfsd4_op_u *u
) {
+ T name = &u->member;
...
}
@cast@
identifier find.func;
type T, opsT;
identifier ops, N;
@@
opsT ops[] = {
[N] =
- (T)
func,
};
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9315564747cb6a570e99196b3a4880fb817635fd ]
Clean up: NFSv2 has the only two usages of rpc_drop_reply in the
NFSD code base. Since NFSv2 is going away at some point, replace
these in order to simplify the "drop this reply?" check in
nfsd_dispatch().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44df6f439a1790a5f602e3842879efa88f346672 ]
The delegation reaper is called by nfsd memory shrinker's on
the 'count' callback. It scans the client list and sends the
courtesy CB_RECALL_ANY to the clients that hold delegations.
To avoid flooding the clients with CB_RECALL_ANY requests, the
delegation reaper sends only one CB_RECALL_ANY request to each
client per 5 seconds.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
[ cel: moved definition of RCA4_TYPE_MASK_RDATA_DLG ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3959066b697b5dfbb7141124ae9665337d4bc638 ]
Add XDR encode and decode function for CB_RECALL_ANY.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1049eb47f20b9eabf9afb218578fff16b4baca6 ]
Refactoring courtesy_client_reaper to generic low memory
shrinker so it can be used for other purposes.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a1d88a36f77374c77fd41a4386d8c2736b8704 ]
_nfsd_copy_file_range() calls vfs_fsync_range() with an offset and
count (bytes written), but the former wants the start and end bytes
of the range to sync. Fix it up.
Fixes: eac0b17a77fb ("NFSD add vfs_fsync after async copy is done")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f27783b4dd235ef3c8dbf69fc6322777450323c ]
We currently do a lock_to_openmode call based on the arguments from the
NLM_UNLOCK call, but that will always set the fl_type of the lock to
F_UNLCK, and the O_RDONLY descriptor is always chosen.
Fix it to use the file_lock from the block instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69efce009f7df888e1fede3cb2913690eb829f52 ]
Shared locks are set on O_RDONLY descriptors and exclusive locks are set
on O_WRONLY ones. nlmsvc_unlock however calls vfs_lock_file twice, once
for each descriptor, but it doesn't reset fl_file. Ensure that it does.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01d53a88c08951f88f2a42f1f1e6568928e0590e ]
With the addition of POSIX ACLs to struct nfsd_attrs, we no longer
return an error if setting the ACL fails. Ensure we return the na_aclerr
error on SETATTR if there is one.
Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs")
Cc: Neil Brown <neilb@suse.de>
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18ebd35b61b4693a0ddc270b6d4f18def232e770 ]
vfs_lock_file() expects the struct file_lock to be fully initialised by
the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field
is NULL.
Fixes: aec158242b87 ("lockd: set fl_owner when unlocking files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216582
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22ae4c114f77b55a4c5036e8f70409a0799a08f8 ]
We don't really care whether there are hashed entries when it comes to
scheduling the laundrette. They might all be non-gc entries, after all.
We only want to schedule it if there are entries on the LRU.
Switch to using list_lru_count, and move the check into
nfsd_file_gc_worker. The other callsite in nfsd_file_put doesn't need to
count entries, since it only schedules the laundrette after adding an
entry to the LRU.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8214118589881b2d390284410c5ff275e7a5e03c ]
In a coming patch, we're going to rework how the filecache refcounting
works. Move some code around in the function to reduce the churn in the
later patches, and rename some of the functions with (hopefully) clearer
names: nfsd_file_flush becomes nfsd_file_fsync, and
nfsd_file_unhash_and_dispose is renamed to nfsd_file_unhash_and_queue.
Also, the nfsd_file_put_final tracepoint is renamed to nfsd_file_free,
to better match the name of the function from which it's called.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f696e230ea5198e393368b319eb55651828d687 ]
We're counting mapping->nrpages, but not all of those are necessarily
dirty. We don't really have a simple way to count just the dirty pages,
so just remove this stat since it's not accurate.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47b295e8d76a4d69f0e2ea0cd8a79c9d3488280 ]
fh_match() is costly, especially when filehandles are large (as is
the case for NFSv4). It needs to be used sparingly when searching
data structures. Unfortunately, with common workloads, I see
multiple thousands of objects stored in file_hashtbl[], which has
just 256 buckets, making its bucket hash chains quite lengthy.
Walking long hash chains with the state_lock held blocks other
activity that needs that lock. Sizable hash chains are a common
occurrance once the server has handed out some delegations, for
example -- IIUC, each delegated file is held open on the server by
an nfs4_file object.
To help mitigate the cost of searching with fh_match(), replace the
nfs4_file hash table with an rhashtable, which can dynamically
resize its bucket array to minimize hash chain length.
The result of this modification is an improvement in the latency of
NFSv4 operations, and the reduction of nfsd CPU utilization due to
eliminating the cost of multiple calls to fh_match() and reducing
the CPU cache misses incurred while walking long hash chains in the
nfs4_file hash table.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15424748001a9b5ea62b3e6ad45f0a8b27f01df9 ]
find_file() is now the only caller of find_file_locked(), so just
fold these two together.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9270fc514ba7d415636b23bcb937573a1ce54f6a ]
Remove the call to find_file_locked() in insert_nfs4_file(). Tracing
shows that over 99% of these calls return NULL. Thus it is not worth
the expense of the extra bucket list traversal. insert_file() already
deals correctly with the case where the item is already in the hash
bucket.
Since nfsd4_file_hash_insert() is now just a wrapper around
insert_file(), move the meat of insert_file() into
nfsd4_file_hash_insert() and get rid of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3341678f2fd6106055cead09e513fad6950a0d19 ]
Refactor to relocate hash deletion operation to a helper function
that is close to most other nfs4_file data structure operations.
The "noinline" annotation will become useful in a moment when the
hlist_del_rcu() is replaced with a more complex rhash remove
operation. It also guarantees that hash remove operations can be
traced with "-p function -l remove_nfs4_file_locked".
This also simplifies the organization of forward declarations: the
to-be-added rhashtable and its param structure will be defined
/after/ put_nfs4_file().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a21fa3e7fdecb3c5b97014f0fc5a17d5806cae ]
Name this function more consistently. I'm going to use nfsd4_file_
and nfsd4_file_hash_ for these helpers.
Change the @fh parameter to be const pointer for better type safety.
Finally, move the hash insertion operation to the caller. This is
typical for most other "init_object" type helpers, and it is where
most of the other nfs4_file hash table operations are located.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fe828caddd81e68e9d29353c6e9285a658ca056 ]
Enable callers to use const pointers for type safety.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b48f8056c034f28dd54668399f1d22be421b0bef ]
Enable callers to use const pointers where they are able to.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1c74569bbde91299f24535abf711be5c84df9de ]
Delegation revocation is an exceptional event that is not otherwise
visible externally (eg, no network traffic is emitted). Generate a
trace record when it occurs so that revocation can be observed or
other activity can be triggered. Example:
nfsd-1104 [005] 1912.002544: nfsd_stid_revoke: client 633c9343:4e82788d stateid 00000003:00000001 ref=2 type=DELEG
Trace infrastructure is provided for subsequent additional tracing
related to nfs4_stid activity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20eee313ff4b8a7e71ae9560f5c4ba27cd763005 ]
Handing out a delegation stateid is recorded with the
nfsd_deleg_read tracepoint, but there isn't a matching tracepoint
for recording when the stateid is returned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3276c1f5b268ff56622e9e125b792b4c3dc03ac ]
Record what we've learned recently about the NFSD filecache in a
documenting comment so our future selves don't forget what all this
is for.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d1ea8455716ca070e3cd85767e6f6a562a58b1b ]
NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.
Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.
Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcf3f80965ca787c70def402cdf1553c93c75529 ]
This reverts commit 5e138c4a750dc140d881dab4a8804b094bbc08d2.
That commit attempted to make files available to other users as soon
as all NFSv4 clients were done with them, rather than waiting until
the filecache LRU had garbage collected them.
It gets the reference counting wrong, for one thing.
But it also misses that DELEGRETURN should release a file in the
same fashion. In fact, any nfsd_file_put() on an file held open
by an NFSv4 client needs potentially to release the file
immediately...
Clear the way for implementing that idea.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c252849082ff525af18b4f253b3c9ece94e951ed ]
In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.
nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 427505ffeaa464f683faba945a88d3e3248f6979 ]
expfs.c has a bunch of dprintk statements which are unusable due to:
#define dprintk(fmt, args...) do{}while(0)
Use pr_debug so that they can be enabled dynamically.
Also make some minor changes to the debug statements to fix some
incorrect types, and remove __func__ which can be handled by dynamic
debug separately.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3a4b2ac2f28b9be78ad21f401f31e263845214 ]
rpc.nfsd stopped supporting NFSv2 a year ago. Take the next logical
step toward deprecating it and allow NFSv2 support to be compiled out.
Add a new CONFIG_NFSD_V2 option that can be turned off and rework the
CONFIG_NFSD_V?_ACL option dependencies. Add a description that
discourages enabling it.
Also, change the description of CONFIG_NFSD to state that the always-on
version is now 3 instead of 2.
Finally, add an #ifdef around "case 2:" in __write_versions. When NFSv2
is disabled at compile time, this should make the kernel ignore attempts
to disable it at runtime, but still error out when trying to enable it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb12fae1c34b1fa7eaae92c5aadc72d86d7fae19 ]
nfserrno() is common to all nfs versions, but nfsproc.c is specifically
for NFSv2. Move it to vfs.c, and the prototype to vfs.h.
While we're in here, remove the #ifdef EDQUOT check in this function.
It's apparently a holdover from the initial merge of the nfsd code in
1997. No other place in the kernel checks that that symbol is defined
before using it, so I think we can dispense with it here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e823bafff2308753d430566256c83d8085952da ]
The kernel currently errors out if you attempt to enable or disable a
version that it doesn't recognize. Change it to ignore attempts to
disable an unrecognized version. If we don't support it, then there is
no harm in doing so.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 841fd0a3cb490eae5dfd262eccb8c8b11d57f8b8 ]
For some reason, the NFSv2 GETACL result encoder was fully converted
to use the new nfs_stream_encode_acl(), but the NFSv3 equivalent was
not similarly converted.
Fixes: 20798dfe249a ("NFSD: Update the NFSv3 GETACL result encoder to use struct xdr_stream")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5021e911d3479346a75ac9b7d9dcd751b0fb99 ]
The xdr_stream conversion inadvertently left some code that set the
page_len of the send buffer. The XDR stream encoders should handle
this automatically now.
This oversight adds garbage past the end of the Reply message.
Clients typically ignore the garbage, but NFSD does not need to send
it, as it leaks stale memory contents onto the wire.
Fixes: f8cba47344f7 ("NFSD: Update the NFSv2 GETACL result encoder to use struct xdr_stream")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69eed23baf877bbb1f14d7f4df54f89807c9ee2a ]
Variable host_err is assigned a value that is never read, it is being
re-assigned a value in every different execution path in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang-scan warning:
warning: Value stored to 'host_err' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeadcb75794516839078c28b3730132aeb700ce6 ]
Chuck had suggested reverting READ_PLUS so it returns a single DATA
segment covering the requested read range. This prepares the server for
a future "sparse read" function so support can easily be added without
needing to rip out the old READ_PLUS code at the same time.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c67530e1f95ac25c7075635f32f04367380894 ]
nfsd currently doesn't access i_flctx safely everywhere. This requires a
smp_load_acquire, as the pointer is set via cmpxchg (a release
operation).
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98b41ffe0afdfeaa1439a5d6bd2db4a94277e31b ]
lockd currently doesn't access i_flctx safely. This requires a
smp_load_acquire, as the pointer is set via cmpxchg (a release
operation).
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401a8b8fd5acd51582b15238d72a8d0edd580e9f ]
There are a number of places in the kernel that are accessing the
inode->i_flctx field without smp_load_acquire. This is required to
ensure that the caller doesn't see a partially-initialized structure.
Add a new accessor function for it to make this clear and convert all of
the relevant accesses in locks.c to use it. Also, convert
locks_free_lock_context to use the helper as well instead of just doing
a "bare" assignment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac8db824ead0de2e9111337c401409d010fba2f0 ]
This was found when virtual machines with nfs-mounted qcow2 disks
failed to boot properly.
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142132
Fixes: bfbfb6182ad1 ("nfsd_splice_actor(): handle compound pages")
[ cel: "‘for’ loop initial declarations are only allowed in C99 or C11 mode" ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50256e4793a5e5ab77703c82a47344ad2e774a59 ]
nfsd_lookup_dentry returns an export reference in addition to the dentry
ref. Ensure that we put it too.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2138866
Fixes: 876c553cb410 ("NFSD: verify the opened dentry after setting a delegation")
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd6b5624c62d0acd350d07564f1c82fe649235f ]
When we fail to insert into the hashtable with a non-retryable error,
we'll free the object and then goto out_status. If the tracepoint is
enabled, it'll end up accessing the freed object when it tries to
grab the fields out of it.
Set nf to NULL after freeing it to avoid the issue.
Fixes: 243a5263014a ("nfsd: rework hashtable handling in nfsd_do_file_acquire")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3aefd2b29ff5ffdeb5c06a7d3191a027a18cdb8 ]
If the namespace doesn't match the one in "net", then we'll continue,
but that doesn't cause another rhashtable_walk_next call, so it will
loop infinitely.
Fixes: ce502f81ba88 ("NFSD: Convert the filecache to use rhashtable")
Reported-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/ltp/Y1%2FP8gDAcWC%2F+VR3@pevik/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd86c69dae65de30f6d47249418ba7889809e31a ]
syzbot is reporting UAF read at register_shrinker_prepared() [1], for
commit 7746b32f467b3813 ("NFSD: add shrinker to reap courtesy clients on
low memory condition") missed that nfsd4_leases_net_shutdown() from
nfsd_exit_net() is called only when nfsd_init_net() succeeded.
If nfsd_init_net() fails due to nfsd_reply_cache_init() failure,
register_shrinker() from nfsd4_init_leases_net() has to be undone
before nfsd_init_net() returns.
Link: https://syzkaller.appspot.com/bug?extid=ff796f04613b4c84ad89 [1]
Reported-by: syzbot <syzbot+ff796f04613b4c84ad89@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 7746b32f467b3813 ("NFSD: add shrinker to reap courtesy clients on low memory condition")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 243a5263014a30436c93ed3f1f864c1da845455e ]
nfsd_file is RCU-freed, so we need to hold the rcu_read_lock long enough
to get a reference after finding it in the hash. Take the
rcu_read_lock() and call rhashtable_lookup directly.
Switch to using rhashtable_lookup_insert_key as well, and use the usual
retry mechanism if we hit an -EEXIST. Rename the "retry" bool to
open_retry, and eliminiate the insert_err goto target.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d0d254b15cc5b7d46d85fb7ab8ecede9575e672 ]
nfsd_file_unhash_and_dispose() is called for two reasons:
We're either shutting down and purging the filecache, or we've gotten a
notification about a file delete, so we want to go ahead and unhash it
so that it'll get cleaned up when we close.
We're either walking the hashtable or doing a lookup in it and we
don't take a reference in either case. What we want to do in both cases
is to try and unhash the object and put it on the dispose list if that
was successful. If it's no longer hashed, then we don't want to touch
it, with the assumption being that something else is already cleaning
up the sentinel reference.
Instead of trying to selectively decrement the refcount in this
function, just unhash it, and if that was successful, move it to the
dispose list. Then, the disposal routine will just clean that up as
usual.
Also, just make this a void function, drop the WARN_ON_ONCE, and the
comments about deadlocking since the nature of the purported deadlock
is no longer clear.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a80bf902d2bc722b4477442ee772e8574603185 ]
All uses of fanotify_event_has_path() have
been removed since commit 9c61f3b560f5 ("fanotify: break up
fanotify_alloc_event()"), now it is useless, so remove it.
Link: https://lore.kernel.org/r/20220926023018.1505270-1-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
[ cel: resolved merge conflict ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f847c74d6e89f10926db58649a05b99237258691 ]
fsnotify_alloc_event_holder() and fsnotify_destroy_event_holder()
has been removed since commit 7053aee26a35 ("fsnotify: do not share
events between notification groups"), so remove it.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 895ddf5ed4c54ea9e3533606d7a8b4e4f27f95ef ]
We've had some reports of problems in the refcounting for delegation
stateids that we've yet to track down. Add some extra checks to ensure
that we've removed the object from various lists before freeing it.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2127067
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b95239ca4954a0d48b19c09ce7e8f31b453b4216 ]
queue_work can return false and not queue anything, if the work is
already queued. If that happens in the case of a CB_RECALL, we'll have
taken an extra reference to the stid that will never be put. Ensure we
throw a warning in that case.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d01416ab41540bb13ec4a39ac4e6c4aa5934bc9 ]
In the case of a revoked delegation, we still fill out the pointer even
when returning an error, which is bad form. Only overwrite the pointer
on success.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76ce4dcec0dc08a032db916841ddc4e3998be317 ]
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
Add an NFSv4 helper that computes the size of the send buffer. It
replaces svc_max_payload() in spots where svc_max_payload() returns
a value that might be larger than the remaining send buffer space.
Callers who need to know the transport's actual maximum payload size
will continue to use svc_max_payload().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 781fde1a2ba2391f31142f46f964cf1148ca1791 ]
Code maintenance: The name of the copy_stateid_t::sc_count field
collides with the sc_count field in struct nfs4_stid, making the
latter difficult to grep for when auditing stateid reference
counting.
No behavior change expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64776611a06322b99386f8dfe3b3ba1aa0347a38 ]
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
nfsd_net is converted from seq_file->file instead of seq_file->private in
nfsd_reply_cache_stats_show().
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
[ cel: reduce line length ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d7f6b302b75ff7acb9eb3cab0c631b10cfa7542 ]
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
inode is converted from seq_file->file instead of seq_file->private in
client_info_show().
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f553e61bd36c1048543ac2f6945103dd2f742be ]
Remove a couple of 4-byte holes on platforms with 64-bit pointers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77e378cf2a595d8e39cddf28a31efe6afd9394a0 ]
This field was added by commit 1091006c5eb1 ("nfsd: turn on reply
cache for NFSv4") but was never put to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6604148cf961b57fc735e4204f8996536da9253c ]
These helpers are always invoked indirectly, so the compiler can't
inline these anyway. While we're updating the synopses of these
helpers, defensively convert their parameters to const pointers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9993a66317fc9951322483a9edbfae95a640b210 ]
In today's Linux NFS server implementation, the NFS dispatcher
initializes each XDR result stream, and the NFSv4 .pc_func and
.pc_encode methods all use xdr_stream-based encoding. This keeps
rq_res.len automatically updated. There is no longer a need for
the WARN_ON_ONCE() check in nfs4svc_encode_compoundres().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3d2a04f05c590303c125a176e6e43df4a436fdb ]
Replace the check for buffer over/underflow with a helper that is
commonly used for this purpose. The helper also sets xdr->nwords
correctly after successfully linearizing the symlink argument into
the stream's scratch buffer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98124f5bd6c76699d514fbe491dd95265369cc99 ]
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fdc546462348b8a497c72bc894e0cde9f10fc40 ]
Have SunRPC clear everything except for the iops array. Then have
each NFSv4 XDR decoder clear it's own argument before decoding.
Now individual operations may have a large argument struct while not
penalizing the vast majority of operations with a small struct.
And, clearing the argument structure occurs as the argument fields
are initialized, enabling the CPU to do write combining on that
memory. In some cases, clearing is not even necessary because all
of the fields in the argument structure are initialized by the
decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103cc1fafee48adb91fca0e19deb869fd23e46ab ]
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7746b32f467b3813fb61faaab3258de35806a7ac ]
Add courtesy_client_reaper to react to low memory condition triggered
by the system memory shrinker.
The delayed_work for the courtesy_client_reaper is scheduled on
the shrinker's count callback using the laundry_wq.
The shrinker's scan callback is not used for expiring the courtesy
clients due to potential deadlocks.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
[ cel: adjusted to apply without e33c267ab70d ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a4ea23d86a317c4b68b9a69d51f7e84e1e04357 ]
Add counter nfs4_courtesy_client_count to nfsd_net to keep track
of the number of courtesy clients in the system.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f5f8b6d655fd947e899b1771c2f7cb581a06764 ]
nfsd_unlink() can kick off a CB_RECALL (via
vfs_unlink() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_unlink()
again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68c522afd0b1936b48a03a4c8b81261e7597c62d ]
nfsd_rename() can kick off a CB_RECALL (via
vfs_rename() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_rename()
again, once.
This version of the patch handles renaming an existing file,
but does not deal with renaming onto an existing file. That
case will still always trigger an NFS4ERR_DELAY.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34b91dda7124fc3259e4b2ae53e0c933dedfec01 ]
nfsd_setattr() can kick off a CB_RECALL (via
notify_change() -> break_lease()) if a delegation is present. Before
returning NFS4ERR_DELAY, give the client holding that delegation a
chance to return it and then retry the nfsd_setattr() again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0aa1913db57219e91a0a8832363cbafb3a9cf8f ]
Move code that will be retried (in a subsequent patch) into a helper
function.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c035362eb935fe9381d9d1cc453bc2a37460e24c ]
Subsequent patches will use this mechanism to wake up an operation
that is waiting for a client to return a delegation.
The new tracepoint records whether the wait timed out or was
properly awoken by the expected DELEGRETURN:
nfsd-1155 [002] 83799.493199: nfsd_delegret_wakeup: xid=0x14b7d6ef fh_hash=0xf6826792 (timed out)
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1035d65446a018ca2dd179e29a2fcd6d29057781 ]
Wireshark has always been lousy about dissecting NFSv4 callbacks,
especially NFSv4.0 backchannel requests. Add tracepoints so we
can surgically capture these events in the trace log.
Tracepoints are time-stamped and ordered so that we can now observe
the timing relationship between a CB_RECALL Reply and the client's
DELEGRETURN Call. Example:
nfsd-1153 [002] 211.986391: nfsd_cb_recall: addr=192.168.1.67:45767 client 62ea82e4:fee7492a stateid 00000003:00000001
nfsd-1153 [002] 212.095634: nfsd_compound: xid=0x0000002c opcnt=2
nfsd-1153 [002] 212.095647: nfsd_compound_status: op=1/2 OP_PUTFH status=0
nfsd-1153 [002] 212.095658: nfsd_file_put: hash=0xf72 inode=0xffff9291148c7410 ref=3 flags=HASHED|REFERENCED may=READ file=0xffff929103b3ea00
nfsd-1153 [002] 212.095661: nfsd_compound_status: op=2/2 OP_DELEGRETURN status=0
kworker/u25:8-148 [002] 212.096713: nfsd_cb_recall_done: client 62ea82e4:fee7492a stateid 00000003:00000001 status=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18224dc58d960c65446971930d0487fc72d00598 ]
nfsd4_prepare_cb_recall() has been removed since
commit 0162ac2b978e ("nfsd: introduce nfsd4_callback_ops"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6106d9119b6599fa23dc556b429d887b4c2d9f62 ]
We only need the inode number for this, not a full rack of attributes.
Rename this function make it take a pointer to a u64 instead of
struct kstat, and change it to just request STATX_INO.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
[ cel: renamed get_mounted_on_ino() ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7518a3dc5ea249d4112156ce71b8b184eb786151 ]
If an NFS server returns NFS4ERR_RESOURCE on the first operation in
an NFSv4 COMPOUND, there's no way for a client to know where the
problem is and then simplify the compound to make forward progress.
So instead, make NFSD process as many operations in an oversized
COMPOUND as it can and then return NFS4ERR_RESOURCE on the first
operation it did not process.
pynfs NFSv4.0 COMP6 exercises this case, but checks only for the
COMPOUND status code, not whether the server has processed any
of the operations.
pynfs NFSv4.1 SEQ6 and SEQ7 exercise the NFSv4.1 case, which detects
too many operations per COMPOUND by checking against the limits
negotiated when the session was created.
Suggested-by: Bruce Fields <bfields@fieldses.org>
Fixes: 0078117c6d91 ("nfsd: return RESOURCE not GARBAGE_ARGS on too many ops")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9558f9304ca1903090fa5d995a3269a8e82804b4 ]
nfsd_create_locked() does not use the "fname" and "flen" arguments, so
drop them from declaration and all callers.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa6be9cc6e80ec79892ddf08a8c10cabab9baf38 ]
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401bc1f90874280a80b93f23be33a0e7e2d1f912 ]
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 640f87c190e0d1b2a0fcb2ecf6d2cd53b1c41991 ]
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80e591ce636f3ae6855a0ca26963da1fdd6d4508 ]
When attempting an NFSv4 mount, a Solaris NFSv4 client builds a
single large COMPOUND that chains a series of LOOKUPs to get to the
pseudo filesystem root directory that is to be mounted. The Linux
NFS server's current maximum of 16 operations per NFSv4 COMPOUND is
not large enough to ensure that this works for paths that are more
than a few components deep.
Since NFSD_MAX_OPS_PER_COMPOUND is mostly a sanity check, and most
NFSv4 COMPOUNDS are between 3 and 6 operations (thus they do not
trigger any re-allocation of the operation array on the server),
increasing this maximum should result in little to no impact.
The ops array can get large now, so allocate it via vmalloc() to
help ensure memory fragmentation won't cause an allocation failure.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216383
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30a30fcc3fc1ad4c5d017c9fcb75dc8f59e7bdad ]
Propagate the error code returned by memdup_user() instead of a hard coded
-EFAULT.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d44899b8bb0b919f923186c616a84f0e70e04772 ]
memdup_user() can't return NULL, so there is no point for checking for it.
Simplify some tests accordingly.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 754035ff79a14886e68c0c9f6fa80adb21f12b53 ]
If the passed in filehandle for the source file in the COPY operation
is not a regular file, the server MUST return NFS4ERR_WRONG_TYPE.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97f8e62572555f8ad578d7b1739ba64d5d2cac0f ]
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f78ae00a8e5d7abe13abac8305a300f6afd74b ]
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfbfb6182ad1d7d184b16f25165faad879147f79 ]
pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: f0f6b614f83d "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ cel: "‘for’ loop initial declarations are only allowed in C99 or C11 mode" ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00801cd92d91e94aa04d687f9bb9a9104e7c3d46 ]
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d66 ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6930bcbfb6ceda63e298c6af6d733ecdf6bd4cde ]
lockd doesn't currently vet the start and length in nlm4 requests like
it should, and can end up generating lock requests with arguments that
overflow when passed to the filesystem.
The NLM4 protocol uses unsigned 64-bit arguments for both start and
length, whereas struct file_lock tracks the start and end as loff_t
values. By the time we get around to calling nlm4svc_retrieve_args,
we've lost the information that would allow us to determine if there was
an overflow.
Start tracking the actual start and len for NLM4 requests in the
nlm_lock. In nlm4svc_retrieve_args, vet these values to ensure they
won't cause an overflow, and return NLM4_FBIG if they do.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=392
Reported-by: Jan Kasiak <j.kasiak@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb4d53d66e4b8c8b8e5634802262e53851a2d2db ]
When locking a file to access ACLs and xattrs etc, use explicit locking
with inode_lock() instead of fh_lock(). This means that the calls to
fh_fill_pre/post_attr() are also explicit which improves readability and
allows us to place them only where they are needed. Only the xattr
calls need pre/post information.
When locking a file we don't need I_MUTEX_PARENT as the file is not a
parent of anything, so we can use inode_lock() directly rather than the
inode_lock_nested() call that fh_lock() uses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit debf16f0c671cb8db154a9ebcd6014cfff683b80 ]
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e18bcb33bc5b69bccc2b532075aa00bb49cc01c5 ]
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe
because fh_unlock() records that the unlock has been done and doesn't
repeat it.
However it makes the code a little confusing and interferes with changes
that are planned for directory locking.
So rearrange the code to ensure fh_unlock() is called exactly once if
fh_lock() was called.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b677c0c63a135a916493c064906582e9f3ed4802 ]
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927bfc5600cd6333c9ef9f090f19e66b7d4c8ee1 ]
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0cbe70742f4a70893cd6e5f6b10b6e89b6db95b ]
pacl and dpacl pointers are added to struct nfsd_attrs, which requires
that we have an nfsd_attrs_free() function to free them.
Those nfsv4 functions that can set ACLs now set up these pointers
based on the passed in NFSv4 ACL.
nfsd_setattr() sets the acls as appropriate.
Errors are handled as with security labels.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6a97d3f589a3a46a16183e03f3774daee251317 ]
nfsd_setattr() now sets a security label if provided, and nfsv4 provides
it in the 'open' and 'create' paths and the 'setattr' path.
If setting the label failed (including because the kernel doesn't
support labels), an error field in 'struct nfsd_attrs' is set, and the
caller can respond. The open/create callers clear
FATTR4_WORD2_SECURITY_LABEL in the returned attr set in this case.
The setattr caller returns the error.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93adc1e391a761441d783828b93979b38093d011 ]
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe2a71dda349a1afa75781f0cc7975be9784d15 ]
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 876c553cb41026cb6ad3cef970a35e5f69c42a25 ]
Between opening a file and setting a delegation on it, someone could
rename or unlink the dentry. If this happens, we do not want to grant a
delegation on the open.
On a CLAIM_NULL open, we're opening by filename, and we may (in the
non-create case) or may not (in the create case) be holding i_rwsem
when attempting to set a delegation. The latter case allows a
race.
After getting a lease, redo the lookup of the file being opened and
validate that the resulting dentry matches the one in the open file
description.
To properly redo the lookup we need an rqst pointer to pass to
nfsd_lookup_dentry(), so make sure that is available.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbf936edd543e7220f60f9cbd6933b916550396d ]
Currently, we pass the fh of the opened file down through several
functions so that alloc_init_deleg can pass it to delegation_blocked.
The filehandle of the open file is available in the nfs4_file however,
so there's no need to pass it in a separate argument.
Drop the argument from alloc_init_deleg, nfs4_open_delegation and
nfs4_set_delegation.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a11ada99ce93a79393dc6683d22f7915748c8f6b ]
Refactor so that CB_OFFLOAD arguments can be passed without
allocating a whole struct nfsd4_copy object. On my system (x86_64)
this removes another 96 bytes from struct nfsd4_copy.
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad1e46c9b07b13659635ee5405f83ad0df143116 ]
Instead of manufacturing a phony struct nfsd_file, pass the
struct file returned by nfs42_ssc_open() directly to
nfsd4_do_copy().
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b7bf5933cada732783554edf0dc61283551c6cf ]
Refactor: Now that nfsd4_do_copy() no longer calls the cleanup
helpers, plumb the use of struct file pointers all the way down to
_nfsd_copy_file_range().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 478ed7b10d875da2743d1a22822b9f8a82df8f12 ]
Move the nfsd4_cleanup_*() call sites out of nfsd4_do_copy(). A
subsequent patch will modify one of the new call sites to avoid
the need to manufacture the phony struct nfsd_file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24d796ea383b8a4c8234e06d1b14bbcd371192ea ]
The @src parameter is sometimes a pointer to a struct nfsd_file and
sometimes a pointer to struct file hiding in a phony struct
nfsd_file. Refactor nfsd4_cleanup_inter_ssc() so the @src parameter
is always an explicit struct file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1913cdf56cb5bfbc8170873728d13598cbecda23 ]
Clean up: saves 8 bytes, and we can replace check_and_set_stop_copy()
with an atomic bitop.
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99b002a1fa00d90e66357315757e7277447ce973 ]
Similar changes to nfsd4_encode_readv(), all bundled into a single
patch.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e64d85c7d0c59cfcd61d899720b8ccfe895d743 ]
Clean up: Use a helper instead of open-coding the calculation of
the XDR pad size.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 071ae99feadfc55979f89287d6ad2c6a315cb46d ]
Clean-up: Now that nfsd4_encode_readv() does not have to encode the
EOF or rd_length values, it no longer needs to subtract 8 from
@starting_len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28d5bc468efe74b790e052f758ce083a5015c665 ]
write_bytes_to_xdr_buf() is pretty expensive to use for inserting
an XDR data item that is always 1 XDR_UNIT at an address that is
always XDR word-aligned.
Since both the readv and splice read paths encode EOF and maxcount
values, move both to a common code path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c7fb85498eda1d4c6b42cc4886328429814990 ]
Refactor: Make the EOF result available in the entire NFSv4 READ
path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c738b218a2e5a753a336b4b7fee6720b902c7ace ]
Do the test_bit() once -- this reduces the number of locked-bus
operations and makes the function a little easier to read.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab04de60ae1cc64ae16b77feae795311b97720c7 ]
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly. In nfsd4_encode_fattr(), it is unnecessary
because the data item is fixed in size and the buffer destination
address is always word-aligned.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 095a764b7afb06c9499b798c04eaa3cbf70ebe2d ]
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly, and here, it is unnecessary because the
data item is fixed in size, the buffer destination address is
always word-aligned, and the destination location is already in
@p.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5940bfa17fb9964bf9688b4356ca643a8f5e2d ]
This printk pops every time nfsd.ko gets plugged in. Most kmods don't do
that and this one is not very informative. Olaf's email address seems to
be defunct at this point anyway. Just drop it.
Cc: Olaf Kirch <okir@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4271c2c0887562318a0afef97d32d8a71cbe0743 ]
Currently there is no limit on how many v4 clients are supported
by the system. This can be a problem in systems with small memory
configuration to function properly when a very large number of
clients exist that creates memory shortage conditions.
This patch enforces a limit of 1024 NFSv4 clients, including courtesy
clients, per 1GB of system memory. When the number of the clients
reaches the limit, requests that create new clients are returned
with NFS4ERR_DELAY and the laundromat is kicked start to trim old
clients. Due to the overhead of the upcall to remove the client
record, the maximun number of clients the laundromat removes on
each run is limited to 128. This is done to ensure the laundromat
can still process the other tasks in a timely manner.
Since there is now a limit of the number of clients, the 24-hr
idle time limit of courtesy client is no longer needed and was
removed.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0926c39515aa065a296e97dfc8790026f1e53f86 ]
Add counter nfs4_client_count to keep track of the total number
of v4 clients, including courtesy clients, in the system.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6867137ebcf4155fe25f2ecf7c29b9fb90a76d1d ]
This patch moves the v4 specific code from nfsd_init_net() to
nfsd4_init_leases_net() helper in nfs4state.c
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 427f5f83a3191cbf024c5aea6e5b601cdf88d895 ]
The documenting comment for struct nf_file states:
/*
* A representation of a file that has been opened by knfsd. These are hashed
* in the hashtable by inode pointer value. Note that this object doesn't
* hold a reference to the inode by itself, so the nf_inode pointer should
* never be dereferenced, only used for comparison.
*/
Replace the two existing dereferences to make the comment always
true.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e138c4a750dc140d881dab4a8804b094bbc08d2 ]
The last close of a file should enable other accessors to open and
use that file immediately. Leaving the file open in the filecache
prevents other users from accessing that file until the filecache
garbage-collects the file -- sometimes that takes several seconds.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?387
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40a2839470cd62ed68c4a32d72a18ee8975b1ac ]
Avoid recording the allocation of an nfsd_file item that is
immediately released because a matching item was already
inserted in the hash.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be0230069fcbf7d332d010b57c1d0cfd623a84d6 ]
These tracepoints collect different information: the create case does
not open a file, so there's no nf_file available.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce502f81ba884c1fe45dc0ebddbcaaa4ec0fc5fb ]
Enable the filecache hash table to start small, then grow with the
workload. Smaller server deployments benefit because there should
be lower memory utilization. Larger server deployments should see
improved scaling with the number of open files.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc22945ecc2a0a028f3683115f98a922d506c284 ]
Add code to initialize and tear down an rhashtable. The rhashtable
is not used yet.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b824c3d06c85e054caf86e227255112c5e3c38 ]
In a moment, the nfsd_file_hashtbl global will be replaced with an
rhashtable. Replace the one or two spots that need to check if the
hash table is available. We can easily reuse the SHUTDOWN flag for
this purpose.
Document that this mechanism relies on callers to hold the
nfsd_mutex to prevent init, shutdown, and purging to run
concurrently.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0743c2b25c65debd4f599a7c861428cd9de5906 ]
The value in this field can always be computed from nf_inode, thus
it is no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb7ec76e73ff6640241c8f1f2f35c81d4005a2d6 ]
Remove an unnecessary use of nf_hashval.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a845511007a63467fee575353c706806c21218b1 ]
The code that computes the hashval is the same in both callers.
To prevent them from going stale, reframe the documenting comments
to remove descriptions of the underlying hash table structure, which
is about to be replaced.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f53cef15dddec7203df702cdc62e554190385450 ]
IIUC, holding the hash bucket lock is needed only in
nfsd_file_unhash, and there is already a lockdep assertion there.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f7df7094b329ca35d9f9808692bb16c48b13e9 ]
I'm about to replace nfsd_file_hashtbl with an rhashtable. The
individual hash values will no longer be visible or relevant, so
remove them from the tracepoints.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6df19411367a5fb4ef61854cbd1af269c077f917 ]
The checks in nfsd_file_acquire() and nfsd_file_put() that directly
invoke filecache garbage collection are intended to keep cache
occupancy between a low- and high-watermark. The reason to limit the
capacity of the filecache is to keep filecache lookups reasonably
fast.
However, invoking garbage collection at those points has some
undesirable negative impacts. Files that are held open by NFSv4
clients often push the occupancy of the filecache over these
watermarks. At that point:
- Every call to nfsd_file_acquire() and nfsd_file_put() results in
an LRU walk. This has the same effect on lookup latency as long
chains in the hash table.
- Garbage collection will then run on every nfsd thread, causing a
lot of unnecessary lock contention.
- Limiting cache capacity pushes out files used only by NFSv3
clients, which are the type of files the filecache is supposed to
help.
To address those negative impacts, remove the direct calls to the
garbage collector. Subsequent patches will address maintaining
lookup efficiency as cache capacity increases.
Suggested-by: Wang Yugui <wangyugui@e16-tech.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edead3a55804739b2e4af0f35e9c7326264e7b22 ]
Without LRU item rotation, the shrinker visits only a few items on
the end of the LRU list, and those would always be long-term OPEN
files for NFSv4 workloads. That makes the filecache shrinker
completely ineffective.
Adopt the same strategy as the inode LRU by using LRU_ROTATE.
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a0e73e635e3f36b616ad5c943e3d23debe4632f ]
There have been reports of problems when running fstests generic/531
against Linux NFS servers with NFSv4. The NFS server that hosts the
test's SCRATCH_DEV suffers from CPU soft lock-ups during the test.
Analysis shows that:
fs/nfsd/filecache.c
482 ret = list_lru_walk(&nfsd_file_lru,
483 nfsd_file_lru_cb,
484 &head, LONG_MAX);
causes nfsd_file_gc() to walk the entire length of the filecache LRU
list every time it is called (which is quite frequently). The walk
holds a spinlock the entire time that prevents other nfsd threads
from accessing the filecache.
What's more, for NFSv4 workloads, none of the items that are visited
during this walk may be evicted, since they are all files that are
held OPEN by NFS clients.
Address this by ensuring that open files are not kept on the LRU
list.
Reported-by: Frank van der Linden <fllinden@amazon.com>
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=386
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c46203acddd9b9200dbc53d0603c97355fd3a03b ]
Observe the operation of garbage collection and the lifetime of
filecache items.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668ed92e651d3c25f9b6e8cb7ceca54d00daa96d ]
Add a guardrail to prevent freeing memory that is still on a list.
This includes either a dispose list or the LRU list.
This is the sign of a bug, but this class of bugs can be detected
so that they don't endanger system stability, especially while
debugging.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6c6e4c4375bfd3defa5b1ff3604d9f33d1c936 ]
There has always been the capability of exporting filecache metrics
via /proc, but it was never hooked up. Let's surface these metrics
to enable better observability of the filecache.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b330f78040cbe16cf8029df70391b2a491f17e2 ]
If nfsd_file_cache_init() is called after a shutdown, be sure the
stat counters are reset.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bc6d3470fe412f818f9bff6b71d1be3a76af8f3 ]
Refactor nfsd_file_gc() to use the new list_lru helper.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bac5a264d9a923f5b01f3521e1519a8d0358342 ]
Refactor the invariant part of nfsd_file_lru_walk_list() into a
separate helper function.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 904940e94a887701db24401e3ed6928a1d4e329f ]
This is a measure of how long items stay in the filecache, to help
assess how efficient the cache is.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29d4bdbbb910f33d6058d2c51278f00f656df325 ]
Count the number of successful acquisitions that did not create a
file (ie, acquisitions that do not result in a compulsory cache
miss). This count can be compared directly with the reported hit
count to compute a hit ratio.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fd244c115f0321fc5e34ad2291f2a572508e3f7 ]
Surface the NFSD filecache's LRU list length to help field
troubleshooters monitor filecache issues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca3f9acb6d3faf78da2b63324f7c737dbddf7f69 ]
The call trace doesn't add much value, but it sure is noisy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 842e00ac3aa3b4a4f7f750c8ab54f8578fc875d3 ]
Variable len is being assigned a value zero and this is never
read, it is being re-assigned later. The assignment is redundant
and can be removed.
Cleans up clang scan-build warning:
fs/nfsd/nfsctl.c:636:2: warning: Value stored to 'len' is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 184cefbe62627730c30282df12bcff9aae4816ea ]
Instead of trusting that struct file_lock returns completely unchanged
after vfs_test_lock() when there's no conflicting lock, stash away our
nlm_lockowner reference so we can properly release it for all cases.
This defends against another file_lock implementation overwriting fl_owner
when the return type is F_UNLCK.
Reported-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Tested-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23ba98de6dcec665e15c0ca19244379bb0d30932 ]
We had a report from the spring Bake-a-thon of data corruption in some
nfstest_interop tests. Looking at the traces showed the NFS server
allowing a v3 WRITE to proceed while a read delegation was still
outstanding.
Currently, we only set NFSD_FILE_BREAK_* flags if
NFSD_MAY_NOT_BREAK_LEASE was set when we call nfsd_file_alloc.
NFSD_MAY_NOT_BREAK_LEASE was intended to be set when finding files for
COMMIT ops, where we need a writeable filehandle but don't need to
break read leases.
It doesn't make any sense to consult that flag when allocating a file
since the file may be used on subsequent calls where we do want to break
the lease (and the usage of it here seems to be reverse from what it
should be anyway).
Also, after calling nfsd_open_break_lease, we don't want to clear the
BREAK_* bits. A lease could end up being set on it later (more than
once) and we need to be able to break those leases as well.
This means that the NFSD_FILE_BREAK_* flags now just mirror
NFSD_MAY_{READ,WRITE} flags, so there's no need for them at all. Just
drop those flags and unconditionally call nfsd_open_break_lease every
time.
Reported-by: Olga Kornieskaia <kolga@netapp.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2107360
Fixes: 65294c1f2c5e (nfsd: add a new struct file caching facility to nfsd)
Cc: <stable@vger.kernel.org> # 5.4.x : bb283ca18d1e NFSD: Clean up the show_nf_flags() macro
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit feee1ce45a5666bbdb08c5bb2f5f394047b1915b ]
The double `if' is duplicated in line 104, remove one.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220722194639.18545-1-gaoxin@cdjrlc.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e252f2ed1c8c6c3884ab5dd34e003ed21f1fe6e0 ]
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Link: https://lore.kernel.org/r/20220629144210.2983229-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8afd7215aa97f8868d033f6e1d01a276ab2d29c0 ]
Create helper fanotify_may_update_existing_mark() for checking for
conflicts between existing mark flags and fanotify_mark() flags.
Use variable mark_cmd to make the checks for mark command bits
cleaner.
Link: https://lore.kernel.org/r/20220629144210.2983229-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31a371e419c885e0f137ce70395356ba8639dc52 ]
Setting flags FAN_ONDIR FAN_EVENT_ON_CHILD in ignore mask has no effect.
The FAN_EVENT_ON_CHILD flag in mask implicitly applies to ignore mask and
ignore mask is always implicitly applied to events on directories.
Define a mark flag that replaces this legacy behavior with logic of
applying the ignore mask according to event flags in ignore mask.
Implement the new logic to prepare for supporting an ignore mask that
ignores events on children and ignore mask that does not ignore events
on directories.
To emphasize the change in terminology, also rename ignored_mask mark
member to ignore_mask and use accessors to get only the effective
ignored events or the ignored events and flags.
This change in terminology finally aligns with the "ignore mask"
language in man pages and in most of the comments.
Link: https://lore.kernel.org/r/20220629144210.2983229-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c05787b4c2f80a3bebcb9cdbf255d4fa5c1e24e1 ]
Correct spelling in comment.
Signed-off-by: Oliver Ford <ojford@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518145959.41-1-ojford@gmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1197eb5906a5464dbaea24cac296dfc38499cc00 ]
This loop condition tries a bit too hard to be clever. Just test for
the two indices we care about explicitly.
Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aec158242b87a43d83322e99bc71ab4428e5ab79 ]
Unlocking a POSIX lock on an inode with vfs_lock_file only works if
the owner matches. Ensure we set it in the request.
Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2f3e0777da2a5dd62824bbe2fdab1d12caaf8f ]
NFSD has advertised support for the NFSv4 time_create attribute
since commit e377a3e698fb ("nfsd: Add support for the birth time
attribute").
Igor Mammedov reports that Mac OS clients attempt to set the NFSv4
birth time attribute via OPEN(CREATE) and SETATTR if the server
indicates that it supports it, but since the above commit was
merged, those attempts now fail.
Table 5 in RFC 8881 lists the time_create attribute as one that can
be both set and retrieved, but the above commit did not add server
support for clients to provide a time_create attribute. IMO that's
a bug in our implementation of the NFSv4 protocol, which this commit
addresses.
Whether NFSD silently ignores the new birth time or actually sets it
is another matter. I haven't found another filesystem service in the
Linux kernel that enables users or clients to modify a file's birth
time attribute.
This commit reflects my (perhaps incorrect) understanding of whether
Linux users can set a file's birth time. NFSD will now recognize a
time_create attribute but it ignores its value. It clears the
time_create bit in the returned attribute bitmask to indicate that
the value was not used.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Fixes: e377a3e698fb ("nfsd: Add support for the birth time attribute")
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 080abad71e99d2becf38c978572982130b927a28 ]
Commit f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") removed
calls to module_put_and_kthread_exit() from threads that acted as SUNRPC
servers and had a related svc_serv_ops structure. This was correct.
It ALSO removed the module_put_and_kthread_exit() call from
nfs4_run_state_manager() which is NOT a SUNRPC service.
Consequently every time the NFSv4 state manager runs the module count
increments and won't be decremented. So the nfsv4 module cannot be
unloaded.
So restore the module_put_and_kthread_exit() call.
Fixes: f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8698e3bab4dd7968666e84e111d0bfd17c040e77 ]
Commit ceaf69f8eadc ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Fixes: ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir")
Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/
Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08af54b3e5729bc1d56ad3190af811301bdc37a1 ]
Now that there are no more callers of nfsd_file_put() that might
hold a spin lock, ensure the lockdep infrastructure can catch
newly introduced calls to nfsd_file_put() made while a spinlock
is held.
Link: https://lore.kernel.org/linux-nfs/ece7fd1d-5fb3-5155-54ba-347cfc19bd9a@oracle.com/T/#mf1855552570cf9a9c80d1e49d91438cd9085aada
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043862b09cc00273e35e6c3a6389957953a34207 ]
And return explicit nfserr values that match what is documented in the
new comment / API contract.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd8fdb6e545f950f4654a9a10d7e819ad48146e5 ]
Refactor: Use existing helpers that other lock operations use. This
change removes several automatic variables, so re-organize the
variable declarations for readability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5e363eac77ef81542db77ddad0559fa0f9204e ]
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes: e567b98ce9a4b (“nfsd: protect concurrent access to nfsd stats counters”)
Signed-off-by: Julian Schroeder <jumaco@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f6f84aa215f7b6665ccbb937db50860f9ec2989 ]
KASAN report null-ptr-deref as follows:
BUG: KASAN: null-ptr-deref in nfsd_fill_super+0xc6/0xe0 [nfsd]
Write of size 8 at addr 000000000000005d by task a.out/852
CPU: 7 PID: 852 Comm: a.out Not tainted 5.18.0-rc7-dirty #66
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xab/0x120
? nfsd_mkdir+0x71/0x1c0 [nfsd]
? nfsd_fill_super+0xc6/0xe0 [nfsd]
nfsd_fill_super+0xc6/0xe0 [nfsd]
? nfsd_mkdir+0x1c0/0x1c0 [nfsd]
get_tree_keyed+0x8e/0x100
vfs_get_tree+0x41/0xf0
__do_sys_fsconfig+0x590/0x670
? fscontext_read+0x180/0x180
? anon_inode_getfd+0x4f/0x70
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
This can be reproduce by concurrent operations:
1. fsopen(nfsd)/fsconfig
2. insmod/rmmod nfsd
Since the nfsd file system is registered before than nfsd_net allocated,
the caller may get the file_system_type and use the nfsd_net before it
allocated, then null-ptr-deref occurred.
So init_nfsd() should call register_filesystem() last.
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28df0988815f63e2af5e6718193c9f68681ad7ff ]
I noticed CPU pipeline stalls while using perf.
Once an svc thread is scheduled and executing an RPC, no other
processes will touch svc_rqst::rq_flags. Thus bus-locked atomics are
not needed outside the svc thread scheduler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb283ca18d1e67c82d22a329c96c9d6036a74790 ]
The flags are defined using C macros, so TRACE_DEFINE_ENUM is
unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0122e882119ddbd9efa6edfeeac3f5c704a7aeea ]
Instrument calls to nfsd_open_verified() to get a sense of the
filecache hit rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e2ce0cc15a509b859199235a2bad9cece00f67a ]
Clean up nfsd4_open() by converting a large comment at the only
call site for nfsd4_process_open2() to a kerneldoc comment in
front of that function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26320d7e317c37404c811603d50d811132aef78c ]
Clean up: Pull case arms back one tab stop to conform every other
switch statement in fs/nfsd/nfs4proc.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67a16b147045815b6aaafeef8663e5faeb6d569 ]
Clean up: These relics are not likely to benefit server
administrators.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb70bf124b051d4ded4ce57511dfec6d3ebf2b43 ]
There have been reports of races that cause NFSv4 OPEN(CREATE) to
return an error even though the requested file was created. NFSv4
does not provide a status code for this case.
To mitigate some of these problems, reorganize the NFSv4
OPEN(CREATE) logic to allocate resources before the file is actually
created, and open the new file while the parent directory is still
locked.
Two new APIs are added:
+ Add an API that works like nfsd_file_acquire() but does not open
the underlying file. The OPEN(CREATE) path can use this API when it
already has an open file.
+ Add an API that is kin to dentry_open(). NFSD needs to create a
file and grab an open "struct file *" atomically. The
alloc_empty_file() has to be done before the inode create. If it
fails (for example, because the NFS server has exceeded its
max_files limit), we avoid creating the file and can still return
an error to the NFS client.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=382
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: JianHong Yin <jiyin@redhat.com>
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d84c52643ae1d63a8e73e2585464470e7944d1 ]
Its only caller always passes S_IFREG as the @type parameter. As an
additional clean-up, add a kerneldoc comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c388f27759c5d9271d4fca081f7ee138986eb7d ]
Now that its two callers have their own version-specific instance of
this function, do_nfsd_create() is no longer used.
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df9606abddfb01090d5ece7dcc2441d848f690f0 ]
The NFSv3 CREATE and NFSv4 OPEN(CREATE) use cases are about to
diverge such that it makes sense to split do_nfsd_create() into one
version for NFSv3 and one for NFSv4.
As a first step, copy do_nfsd_create() to nfs3proc.c and remove
NFSv4-specific logic.
One immediate legibility benefit is that the logic for handling
NFSv3 createhow is now quite straightforward. NFSv4 createhow
has some subtleties that IMO do not belong in generic code.
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f46e950c395b9c14c282b53ba78c5fd46d6c256 ]
I'd like to move do_nfsd_create() out of vfs.c. Therefore
nfsd_create_setattr() needs to be made publicly visible.
Note that both call sites in vfs.c commit both the new object and
its parent directory, so just combine those common metadata commits
into nfsd_create_setattr().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14ee45b70dd0d9ae76fb066cd8c0652d657353f6 ]
Clean up: The "out" label already invokes fh_drop_write().
Note that fh_drop_write() is already careful not to invoke
mnt_drop_write() if either it has already been done or there is
nothing to drop. Therefore no change in behavior is expected.
[ cel: backported to 5.10.y, prior to idmapped mounts ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e61568599c9ad638fdaba150fee07d7065e31851 ]
As near as I can tell, mode bit masking and setting S_IFREG is
already done by do_nfsd_create() and vfs_create(). The NFSv4 path
(do_open_lookup), for example, does not bother with this special
processing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9488d5ae13c0a72223c507e2508dc2ac66cad4f ]
Update client_info_show to show state of courtesy client
and seconds since last renew.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27431affb0dbc259ac6ffe6071243a576c8f38f1 ]
This patch allows expired client with lock state to be in COURTESY
state. Lock conflict with COURTESY client is resolved by the fs/lock
code using the lm_lock_expirable and lm_expire_lock callback in the
struct lock_manager_operations.
If conflict client is in COURTESY state, set it to EXPIRABLE and
schedule the laundromat to run immediately to expire the client. The
callback lm_expire_lock waits for the laundromat to flush its work
queue before returning to caller.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 591502c5cb325b1c6ec59ab161927d606b918aa0 ]
Add helper locks_owner_has_blockers to check if there is any blockers
for a given lockowner.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d76cc46b37e123e8d245cc3490978dbda56f979d ]
This patch moves create/destroy of laundry_wq from nfs4_state_start
and nfs4_state_shutdown_net to init_nfsd and exit_nfsd to prevent
the laundromat from being freed while a thread is processing a
conflicting lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d69427151806656abf129342028f3f4e5e1fee0 ]
This patch allows expired client with open state to be in COURTESY
state. Share/access conflict with COURTESY client is resolved by
setting COURTESY client to EXPIRABLE state, schedule laundromat
to run and returning nfserr_jukebox to the request client.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66af25799940b26efd41ea6e648f75c41a48a2c2 ]
This patch provides courteous server support for delegation only.
Only expired client with delegation but no conflict and no open
or lock state is allowed to be in COURTESY state.
Delegation conflict with COURTESY/EXPIRABLE client is resolved by
setting it to EXPIRABLE, queue work for the laundromat and return
delay to the caller. Conflict is resolved when the laudromat runs
and expires the EXIRABLE client while the NFS client retries the
OPEN request. Local thread request that gets conflict is doing the
retry in _break_lease.
Client in COURTESY or EXPIRABLE state is allowed to reconnect and
continues to have access to its state. Access to the nfs4_client by
the reconnecting thread and the laundromat is serialized via the
client_lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91e23b1c39820bfed642119ff6b6ef9f43cf09ce ]
nfsd_splice_actor() checks that the page being spliced does not
match the previous element in the svc_rqst::rq_pages array. We
believe this is to prevent a double put_page() in cases where the
READ payload is partially contained in the xdr_buf's head buffer.
However, the NFSD READ proc functions no longer place any part of
the READ payload in the head buffer, in order to properly support
NFS/RDMA READ with Write chunks. Therefore, simplify the logic in
nfsd_splice_actor() to remove this unnecessary check.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e730558adffb88a52e562db089e969ee9510184a ]
The logic for handling events on child in groups that have a mark on
the parent inode, but without FS_EVENT_ON_CHILD flag in the mask is
duplicated in several places and inconsistent.
Move the logic into the preparation of mark type iterator, so that the
parent mark type will be excluded from all mark type iterations in that
case.
This results in several subtle changes of behavior, hopefully all
desired changes of behavior, for example:
- Group A has a mount mark with FS_MODIFY in mask
- Group A has a mark with ignore mask that does not survive FS_MODIFY
and does not watch children on directory D.
- Group B has a mark with FS_MODIFY in mask that does watch children
on directory D.
- FS_MODIFY event on file D/foo should not clear the ignore mask of
group A, but before this change it does
And if group A ignore mask was set to survive FS_MODIFY:
- FS_MODIFY event on file D/foo should be reported to group A on account
of the mount mark, but before this change it is wrongly ignored
Fixes: 2f02fd3fa13e ("fanotify: fix ignore mask logic for events on child and on dir")
Reported-by: Jan Kara <jack@suse.com>
Link: https://lore.kernel.org/linux-fsdevel/20220314113337.j7slrb5srxukztje@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220511190213.831646-3-amir73il@gmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14362a2541797cf9df0e86fb12dcd7950baf566e ]
fsnotify_foreach_iter_mark_type() is used to reduce boilerplate code
of iterating all marks of a specific group interested in an event
by consulting the iterator report_mask.
Use an open coded version of that iterator in fsnotify_iter_next()
that collects all marks of the current iteration group without
consulting the iterator report_mask.
At the moment, the two iterator variants are the same, but this
decoupling will allow us to exclude some of the group's marks from
reporting the event, for example for event on child and inode marks
on parent did not request to watch events on children.
Fixes: 2f02fd3fa13e ("fanotify: fix ignore mask logic for events on child and on dir")
Reported-by: Jan Kara <jack@suse.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220511190213.831646-2-amir73il@gmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f9d3bd520261fd7a850818c71809fd580e0f30c ]
Now that the direct reclaim path is handled we can enable evictable
inode marks.
Link: https://lore.kernel.org/r/20220422120327.3459282-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e79719a2ca5c61912c0493bc1367db52759cf6fd ]
Direct reclaim from fanotify mark allocation context may try to evict
inodes with evictable marks of the same group and hit this deadlock:
[<0>] fsnotify_destroy_mark+0x1f/0x3a
[<0>] fsnotify_destroy_marks+0x71/0xd9
[<0>] __destroy_inode+0x24/0x7e
[<0>] destroy_inode+0x2c/0x67
[<0>] dispose_list+0x49/0x68
[<0>] prune_icache_sb+0x5b/0x79
[<0>] super_cache_scan+0x11c/0x16f
[<0>] shrink_slab.constprop.0+0x23e/0x40f
[<0>] shrink_node+0x218/0x3e7
[<0>] do_try_to_free_pages+0x12a/0x2d2
[<0>] try_to_free_pages+0x166/0x242
[<0>] __alloc_pages_slowpath.constprop.0+0x30c/0x903
[<0>] __alloc_pages+0xeb/0x1c7
[<0>] cache_grow_begin+0x6f/0x31e
[<0>] fallback_alloc+0xe0/0x12d
[<0>] ____cache_alloc_node+0x15a/0x17e
[<0>] kmem_cache_alloc_trace+0xa1/0x143
[<0>] fanotify_add_mark+0xd5/0x2b2
[<0>] do_fanotify_mark+0x566/0x5eb
[<0>] __x64_sys_fanotify_mark+0x21/0x24
[<0>] do_syscall_64+0x6d/0x80
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Set the FSNOTIFY_GROUP_NOFS flag to prevent going into direct reclaim
from allocations under fanotify group lock and use the safe group lock
helpers.
Link: https://lore.kernel.org/r/20220422120327.3459282-16-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d5e005d982527e4029b0139823d179986e34cdc ]
When an inode mark is created with flag FAN_MARK_EVICTABLE, it will not
pin the marked inode to inode cache, so when inode is evicted from cache
due to memory pressure, the mark will be lost.
When an inode mark with flag FAN_MARK_EVICATBLE is updated without using
this flag, the marked inode is pinned to inode cache.
When an inode mark is updated with flag FAN_MARK_EVICTABLE but an
existing mark already has the inode pinned, the mark update fails with
error EEXIST.
Evictable inode marks can be used to setup inode marks with ignored mask
to suppress events from uninteresting files or directories in a lazy
manner, upon receiving the first event, without having to iterate all
the uninteresting files or directories before hand.
The evictbale inode mark feature allows performing this lazy marks setup
without exhausting the system memory with pinned inodes.
This change does not enable the feature yet.
Link: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiRDpuS=2uA6+ZUM7yG9vVU-u212tkunBmSnP_u=mkv=Q@mail.gmail.com/
Link: https://lore.kernel.org/r/20220422120327.3459282-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8998d110835e3781ccd3f1ae061a590b4aaba911 ]
Handle FAN_MARK_IGNORED_SURV_MODIFY flag change in a helper that
is called after updating the mark mask.
Replace the added and removed return values and help variables with
bool recalc return values and help variable, which makes the code a
bit easier to follow.
Rename flags argument to fan_flags to emphasize the difference from
mark->flags.
Link: https://lore.kernel.org/r/20220422120327.3459282-14-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4adce25ccfff215939ee465b8c0aa70526d5c352 ]
To translate from fsnotify mark flags to user visible flags.
Link: https://lore.kernel.org/r/20220422120327.3459282-13-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3638b5b13740fa31762d414bbce8b7a694e582a ]
fsnotify_add_mark() and variants implicitly take a reference on inode
when attaching a mark to an inode.
Make that behavior opt-out with the mark flag FSNOTIFY_MARK_FLAG_NO_IREF.
Instead of taking the inode reference when attaching connector to inode
and dropping the inode reference when detaching connector from inode,
take the inode reference on attach of the first mark that wants to hold
an inode reference and drop the inode reference on detach of the last
mark that wants to hold an inode reference.
Backends can "upgrade" an existing mark to take an inode reference, but
cannot "downgrade" a mark with inode reference to release the refernce.
This leaves the choice to the backend whether or not to pin the inode
when adding an inode mark.
This is intended to be used when adding a mark with ignored mask that is
used for optimization in cases where group can afford getting unneeded
events and reinstate the mark with ignored mask when inode is accessed
again after being evicted.
Link: https://lore.kernel.org/r/20220422120327.3459282-12-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aabb45fdcb31f00f1e7cae2bce83e83474a87c03 ]
Before commit 9542e6a643fc6 ("nfsd: Containerise filecache laundrette")
nfsd would close open files in direct reclaim context. There is no
guarantee that others memory shrinkers don't do the same and no
guarantee that future shrinkers won't do that.
For example, if overlayfs implements inode cache of fscache would
keep open files to cached objects, inode shrinkers could end up closing
open files to underlying fs.
Direct reclaim from dnotify mark allocation context may try to close
open files that have dnotify marks of the same group and hit a deadlock
on mark_mutex.
Set the FSNOTIFY_GROUP_NOFS flag to prevent going into direct reclaim
from allocations under dnotify group lock and use the safe group lock
helpers.
Link: https://lore.kernel.org/r/20220422120327.3459282-11-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8962a9d8cc2d8c93362e2f684091c79f702f6f3 ]
Before commit 9542e6a643fc6 ("nfsd: Containerise filecache laundrette")
nfsd would close open files in direct reclaim context and that could
cause a deadlock when fsnotify mark allocation went into direct reclaim
and nfsd shrinker tried to free existing fsnotify marks.
To avoid issues like this in future code, set the FSNOTIFY_GROUP_NOFS
flag on nfsd fsnotify group to prevent going into direct reclaim from
fsnotify_add_inode_mark().
Link: https://lore.kernel.org/r/20220422120327.3459282-10-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43b245a788e2d8f1bb742668a9bdace02fcb3e96 ]
Create helpers to take and release the group mark_mutex lock.
Define a flag FSNOTIFY_GROUP_NOFS in fsnotify_group that determines
if the mark_mutex lock is fs reclaim safe or not. If not safe, the
lock helpers take the lock and disable direct fs reclaim.
In that case we annotate the mutex with a different lockdep class to
express to lockdep that an allocation of mark of an fs reclaim safe group
may take the group lock of another "NOFS" group to evict inodes.
For now, converted only the callers in common code and no backend
defines the NOFS flag. It is intended to be set by fanotify for
evictable marks support.
Link: https://lore.kernel.org/r/20220422120327.3459282-7-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3010343d9e119da35ee864b3a28993bb5c78ed7 ]
Instead of passing the allow_dups argument to fsnotify_add_mark()
as an argument, define the group flag FSNOTIFY_GROUP_DUPS to express
the allow_dups behavior and set this behavior at group creation time
for all calls of fsnotify_add_mark().
Rename the allow_dups argument to generic add_flags argument for future
use.
Link: https://lore.kernel.org/r/20220422120327.3459282-6-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 867a448d587e7fa845bceaf4ee1c632448f2a9fa ]
Add flags argument to fsnotify_alloc_group(), define and use the flag
FSNOTIFY_GROUP_USER in inotify and fanotify instead of the helper
fsnotify_alloc_user_group() to indicate user allocation.
Although the flag FSNOTIFY_GROUP_USER is currently not used after group
allocation, we store the flags argument in the group struct for future
use of other group flags.
Link: https://lore.kernel.org/r/20220422120327.3459282-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38035c04f5865c4ef9597d6beed6a7178f90f64a ]
The inotify control flags in the mark mask (e.g. FS_IN_ONE_SHOT) are not
relevant to object interest mask, so move them to the mark flags.
This frees up some bits in the object interest mask.
Link: https://lore.kernel.org/r/20220422120327.3459282-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceaf69f8eadcafb323392be88e7a5248c415d423 ]
Dirent events (create/delete/move) are only reported on watched
directory inodes, but in fanotify as well as in legacy inotify, it was
always allowed to set them on non-dir inode, which does not result in
any meaningful outcome.
Until kernel v5.17, dirent events in fanotify also differed from events
"on child" (e.g. FAN_OPEN) in the information provided in the event.
For example, FAN_OPEN could be set in the mask of a non-dir or the mask
of its parent and event would report the fid of the child regardless of
the marked object.
By contrast, FAN_DELETE is not reported if the child is marked and the
child fid was not reported in the events.
Since kernel v5.17, with fanotify group flag FAN_REPORT_TARGET_FID, the
fid of the child is reported with dirent events, like events "on child",
which may create confusion for users expecting the same behavior as
events "on child" when setting events in the mask on a child.
The desired semantics of setting dirent events in the mask of a child
are not clear, so for now, deny this action for a group initialized
with flag FAN_REPORT_TARGET_FID and for the new event FAN_RENAME.
We may relax this restriction in the future if we decide on the
semantics and implement them.
Fixes: d61fd650e9d2 ("fanotify: introduce group flag FAN_REPORT_TARGET_FID")
Fixes: 8cc3b1ccd930 ("fanotify: wire up FAN_RENAME event")
Link: https://lore.kernel.org/linux-fsdevel/20220505133057.zm5t6vumc4xdcnsg@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220507080028.219826-1-amir73il@gmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 999397926ab3f78c7d1235cc4ca6e3c89d2769bf ]
Make it a little less racy, by removing the refcount_read() test. Then
remove the redundant 'is_hashed' variable.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b8a94332ee4f7d9a8ae0cbac7609f79c212f06c ]
The call to filemap_flush() in nfsd_file_put() is there to ensure that
we clear out any writes belonging to a NFSv3 client relatively quickly
and avoid situations where the file can't be evicted by the garbage
collector. It also ensures that we detect write errors quickly.
The problem is this causes a regression in performance for some
workloads.
So try to improve matters by deferring writeback until we're ready to
close the file, and need to detect errors so that we can force the
client to resend.
Tested-by: Jan Kara <jack@suse.cz>
Fixes: b6669305d35a ("nfsd: Reduce the number of calls to nfsd_file_gc()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/all/20220330103457.r4xrhy2d6nhtouzk@quack3.lan
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7b839d47dbc74cf4a07beeab5191f93678673e ]
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./fs/nfsd/nfs2acl.c:289:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_accessres' with return type bool
./fs/nfsd/nfs2acl.c:252:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_getaclres' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f92ca72b0263d601807bbd23ed25cbe6f4da89f4 ]
iput() has already judged the incoming parameter, so there is no need to
repeat the judgment here.
Link: https://lore.kernel.org/r/20220311151240.62045-1-libang.linuxer@gmail.com
Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e317ba72d07901b03399b3d1525e83424df5b3 ]
fsnotify() treats FS_MODIFY events specially - it does not skip them
even if the FS_MODIFY event does not apear in the object's fsnotify
mask. This is because send_to_group() checks if FS_MODIFY needs to
clear ignored mask of marks.
The common case is that an object does not have any mark with ignored
mask and in particular, that it does not have a mark with ignored mask
and without the FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY flag.
Set FS_MODIFY in object's fsnotify mask during fsnotify_recalc_mask()
if object has a mark with an ignored mask and without the
FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY flag and remove the special
treatment of FS_MODIFY in fsnotify(), so that FS_MODIFY events could
be optimized in the common case.
Call fsnotify_recalc_mask() from fanotify after adding or removing an
ignored mask from a mark without FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY
or when adding the FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY flag to a mark
with ignored mask (the flag cannot be removed by fanotify uapi).
Performance results for doing 10000000 write(2)s to tmpfs:
vanilla patched
without notification mark 25.486+-1.054 24.965+-0.244
with notification mark 30.111+-0.139 26.891+-1.355
So we can see the overhead of notification subsystem has been
drastically reduced.
Link: https://lore.kernel.org/r/20220223151438.790268-3-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f0b903ded728c505850daf2914bfc08841f0ae6 ]
fsnotify_parent() does not consider the parent's mark at all unless
the parent inode shows interest in events on children and in the
specific event.
So unless parent added an event to both its mark mask and ignored mask,
the event will not be ignored.
Fix this by declaring the interest of an object in an event when the
event is in either a mark mask or ignored mask.
Link: https://lore.kernel.org/r/20220223151438.790268-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fc5f5346592cdc91689455d83885b0af65d71b8 ]
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the destination.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35aff0678f99b0623bb72d50112de9e163a19559 ]
The common practice is to name function instances the same as the
method names, but with a uniquifying prefix. Commit aef9583b234a
("NFSD: Get reference of lockowner when coping file_lock") missed
this -- the new function names should both have been of the form
"nfsd4_lm_*".
Before more lock manager operations are added in NFSD, rename these
two functions for consistency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f9a62ff7d2808c7b56c0ec90f3b7eae5872afe6 ]
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.
However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.
This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.
The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37902c6313090235c847af89c5515591261ee338 ]
Hoist svo_function back into svc_serv and remove struct
svc_serv_ops, since the struct is now devoid of fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f49169c97fceb21ad6a0aaf671c50b0f520f15a5 ]
struct svc_serv_ops is about to be removed.
Neil Brown says:
> I suspect svo_module can go as well - I don't think the thread is
> ever the thing that primarily keeps a module active.
A random sample of kthread_create() callers shows sunrpc is the only
one that manages module reference count in this way.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d7ec8f043e53ad16e30f5ebb8b9df415ec0f2b ]
Clean up: svc_shutdown_net() now does nothing but call
svc_close_net(). Replace all external call sites.
svc_close_net() is renamed to be the inverse of svc_xprt_create().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4355d767a21b9445958fc11bce9a9701f76529d3 ]
Clean up: Use the "svc_xprt_<task>" function naming convention as
is used for other external APIs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 352ad31448fecc78a2e9b78da64eea5d63b8d0ce ]
Clean up: Use the "svc_xprt_<task>" function naming convention as
is used for other external APIs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87cdd8641c8a1ec6afd2468265e20840a57fd888 ]
Clean up. Neil observed that "any code that calls svc_shutdown_net()
knows what the shutdown function should be, and so can call it
directly."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9ff2e99e9fa501ec965da03c18a5422b37a2f44 ]
We have never been able to track down and address the underlying
cause of the performance issues with workqueue-based service
support. svo_enqueue_xprt is called multiple times per RPC, so
it adds instruction path length, but always ends up at the same
function: svc_xprt_do_enqueue(). We do not anticipate needing
this flexibility for dynamic nfsd thread management support.
As a micro-optimization, remove .svo_enqueue_xprt because
Spectre/Meltdown makes virtual function calls more costly.
This change essentially reverts commit b9e13cdfac70 ("nfsd/sunrpc:
turn enqueueing a svc_xprt into a svc_serv operation").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add1511c38166cf1036765f8c4aa939f0275a799 ]
Move a rarely called function call site out of the hot path.
This is an exceptionally small improvement because the compiler
inlines most of the functions that nfsd_cache_lookup() calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f29ce32fbc56cfdb304eec8a4deb920ccfd89c3 ]
Force the compiler to skip unneeded initialization for cases that
don't need those values. For example, NFSv4 COMPOUND operations are
RC_NOCACHE.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 378a6109dd142a678f629b740f558365150f60f9 ]
Clean up: The details of finding the right hash bucket are exactly
the same in both nfsd_cache_lookup() and nfsd_cache_update().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e377a3e698fb56cb63f6bddbebe7da76dc37e316 ]
For filesystems that supports "btime" timestamp (i.e. most modern
filesystems do) we share it via kernel nfsd. Btime support for NFS
client has already been added by Trond recently.
Suggested-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Ondrej Valousek <ondrej.valousek.xm@renesas.com>
[ cel: addressed some whitespace/checkpatch nits ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c306d737691ef84305d4ed0d302c63db2932f0bb ]
NFS_OFFSET_MAX was introduced way back in Linux v2.3.y before there
was a kernel-wide OFFSET_MAX value. As a clean up, replace the last
few uses of it with its generic equivalent, and get rid of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f965021c8bc38965ecb1924f570c4842b33d408 ]
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_IO
NFS3ERR_STALE
NFS3ERR_BADHANDLE
NFS3ERR_SERVERFAULT
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a648fdeb7c0e17177a2280344d015dba3fbe3314 ]
iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.
Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().
Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6faac3f58c7c4176b66f63def17a34232a17b0e ]
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org
[ cel: context adjusted, 2f221d6f7b88 has not been applied ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 ]
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19a7af73b5ecaac8168712d18be72b9db166768 ]
In my testing, we're sometimes hitting the request->fl_flags & FL_EXISTS
case in posix_lock_inode, presumably just by random luck since we're not
actually initializing fl_flags here.
This probably didn't matter before commit 7f024fcd5c97 ("Keep read and
write fds with each nlm_file") since we wouldn't previously unlock
unless we knew there were locks.
But now it causes lockd to give up on removing more locks.
We could just initialize fl_flags, but really it seems dubious to be
calling vfs_lock_file with random values in some of the fields.
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: fixed checkpatch.pl nit ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e7f90d163afa8fc2efd6ae318e7c20156a5621f ]
I thought I was iterating over the array when actually the iteration is
over the values contained in the array?
Ugh, keep it simple.
Symptoms were a null deference in vfs_lock_file() when an NFSv3 client
that previously held a lock came back up and sent a notify.
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 217663f101a56ef77f82273818253fff082bf503 ]
The code that uses the pointer info has been removed in 7326e382c21e
("fanotify: report old and/or new parent+name in FAN_RENAME event").
and fanotify_event_info() doesn't change 'event', so the declaration and
assignment of info can be removed.
Eliminate the following clang warning:
fs/notify/fanotify/fanotify_user.c:161:24: warning: variable ‘info’ set
but not used
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 074b07d94e0bb6ddce5690a9b7e2373088e8b33a ]
RTM says "If the special ONE stateid is passed to
nfs4_preprocess_stateid_op(), it returns status=0 but does not set
*cstid. nfsd4_copy_notify() depends on stid being set if status=0, and
thus can crash if the client sends the right COPY_NOTIFY RPC."
RFC 7862 says "The cna_src_stateid MUST refer to either open or locking
states provided earlier by the server. If it is invalid, then the
operation MUST fail."
The RFC doesn't specify an error, and the choice doesn't matter much as
this is clearly illegal client behavior, but bad_stateid seems
reasonable.
Simplest is just to guarantee that nfs4_preprocess_stateid_op, called
with non-NULL cstid, errors out if it can't return a stateid.
Reported-by: rtm@csail.mit.edu
Fixes: 624322f1adc5 ("NFSD add COPY_NOTIFY operation")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcb5e3fa012351f3b96024c07bc44834c2478213 ]
These functions are related to file handle processing and have
nothing to do with XDR encoding or decoding. Also they are no longer
NFSv3-specific. As a clean-up, move their definitions to a more
appropriate location. WCC is also an NFSv3-specific term, so rename
them as general-purpose helpers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58f258f65267542959487dbe8b5641754411843d ]
On the wire, I observed NFSv4 OPEN(CREATE) operations sometimes
returning a reasonable-looking value in the cinfo.before field and
zero in the cinfo.after field.
RFC 8881 Section 10.8.1 says:
> When a client is making changes to a given directory, it needs to
> determine whether there have been changes made to the directory by
> other clients. It does this by using the change attribute as
> reported before and after the directory operation in the associated
> change_info4 value returned for the operation.
and
> ... The post-operation change
> value needs to be saved as the basis for future change_info4
> comparisons.
A good quality client implementation therefore saves the zero
cinfo.after value. During a subsequent OPEN operation, it will
receive a different non-zero value in the cinfo.before field for
that directory, and it will incorrectly believe the directory has
changed, triggering an undesirable directory cache invalidation.
There are filesystem types where fs_supports_change_attribute()
returns false, tmpfs being one. On NFSv4 mounts, this means the
fh_getattr() call site in fill_pre_wcc() and fill_post_wcc() is
never invoked. Subsequently, nfsd4_change_attribute() is invoked
with an uninitialized @stat argument.
In fill_pre_wcc(), @stat contains stale stack garbage, which is
then placed on the wire. In fill_post_wcc(), ->fh_post_wc is all
zeroes, so zero is placed on the wire. Both of these values are
meaningless.
This fix can be applied immediately to stable kernels. Once there
are more regression tests in this area, this optimization can be
attempted again.
Fixes: 428a23d2bf0c ("nfsd: skip some unnecessary stats in the v4 case")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75acacb6583df0b9328dc701d8eeea05af49b8b5 ]
According to commit bbf2f098838a ("nfsd: Reset the boot verifier on
all write I/O errors"), the Linux NFS server forces all clients to
resend pending unstable writes if any server-side write or commit
operation encounters an error (say, ENOSPC). This is a rare and
quite exceptional event that could require administrative recovery
action, so it should be made trace-able. Example trace event:
nfsd-938 [002] 7174.945558: nfsd_writeverf_reset: boot_time= 61cc920d xid=0xdcd62036 error=-28 new verifier=0x08aecc6142515904
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3988a57885eeac05ef89f0ab4d7e47b52fbcf630 ]
Clean up: These functions handle what the specs call a write
verifier, which in the Linux NFS server implementation is now
divorced from the server's boot instance
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d2e9b56cf5c80f9efc530d494968369a8a0e0d ]
There are two boot-time fields in struct nfsd_net: one called
boot_time and one called nfssvc_boot. The latter is used only to
form write verifiers, but its documenting comment declares:
/* Time of server startup */
Since commit 27c438f53e79 ("nfsd: Support the server resetting the
boot verifier"), this field can be reset at any time; it's no
longer tied to server restart. So that comment is stale.
Also, according to pahole, struct timespec64 is 16 bytes long on
x86_64. The nfssvc_boot field is used only to form a write verifier,
which is 8 bytes long.
Let's clarify this situation by manufacturing an 8-byte verifier
in nfs_reset_boot_verifier() and storing only that in struct
nfsd_net.
We're grabbing 128 bits of time, so compress all of those into a
64-bit verifier instead of throwing out the high-order bits.
In the future, the siphash_key can be re-used for other hashed
objects per-nfsd_net.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc556600c0133575487cc69fb3128440b3c3e92 ]
When vfs_iter_write() starts to fail because a file system is full,
a bunch of writes can fail at once with ENOSPC. These writes
repeatedly invoke nfsd_reset_boot_verifier() in quick succession.
Ensure that the time it grabs doesn't go backwards due to an ntp
adjustment going on at the same time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f4c3fa4db94ba44d32a72201927cfd132a8e82 ]
Since a clone error commit can cause the boot verifier to change,
we should trace those errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: Addressed a checkpatch.pl splat in fs/nfsd/vfs.h ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c445a0e72cb1fbfbdb7f9473c53556ee27c1d90 ]
Since this pointer is used repeatedly, move it to a stack variable.
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb7622c2dbd1aa41133a8c73e1137b833c074519 ]
Since this pointer is used repeatedly, move it to a stack variable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33388b3aefefd4d83764dab8038cb54068161a44 ]
The RWF_SYNC and !RWF_SYNC arms are now exactly alike except that
the RWF_SYNC arm resets the boot verifier twice in a row. Fix that
redundancy and de-duplicate the code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12bcbd40fd931472c7fc9cf3bfe66799ece93ed8 ]
If we get back -EOPENSTALE from an NFSv4 open, then we either got some
unhandled error or the inode we got back was not the same as the one
associated with the dentry.
We really have no recourse in that situation other than to retry the
open, and if it fails to just return nfserr_stale back to the client.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d0db706c77d02055910fcfe2f6eb5155ff9d5e ]
Now that we have open file cache, it is possible that another client
deletes the file and DP will not know about it. Then IO to MDS would
fail with BADSTATEID and knfsd would start state recovery, which
should fail as well and then nfs read/write will fail with EBADF.
And it triggers a WARN() in nfserrno().
-----------[ cut here ]------------
WARNING: CPU: 0 PID: 13529 at fs/nfsd/nfsproc.c:758 nfserrno+0x58/0x70 [nfsd]()
nfsd: non-standard errno: -9
modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_connt
pata_acpi floppy
CPU: 0 PID: 13529 Comm: nfsd Tainted: G W 4.1.5-00307-g6e6579b #7
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014
0000000000000000 00000000464e6c9c ffff88079085fba8 ffffffff81789936
0000000000000000 ffff88079085fc00 ffff88079085fbe8 ffffffff810a08ea
ffff88079085fbe8 ffff88080f45c900 ffff88080f627d50 ffff880790c46a48
all Trace:
[<ffffffff81789936>] dump_stack+0x45/0x57
[<ffffffff810a08ea>] warn_slowpath_common+0x8a/0xc0
[<ffffffff810a0975>] warn_slowpath_fmt+0x55/0x70
[<ffffffff81252908>] ? splice_direct_to_actor+0x148/0x230
[<ffffffffa02fb8c0>] ? fsid_source+0x60/0x60 [nfsd]
[<ffffffffa02f9918>] nfserrno+0x58/0x70 [nfsd]
[<ffffffffa02fba57>] nfsd_finish_read+0x97/0xb0 [nfsd]
[<ffffffffa02fc7a6>] nfsd_splice_read+0x76/0xa0 [nfsd]
[<ffffffffa02fcca1>] nfsd_read+0xc1/0xd0 [nfsd]
[<ffffffffa0233af2>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc]
[<ffffffffa03073da>] nfsd3_proc_read+0xba/0x150 [nfsd]
[<ffffffffa02f7a03>] nfsd_dispatch+0xc3/0x210 [nfsd]
[<ffffffffa0233af2>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc]
[<ffffffffa0232913>] svc_process_common+0x453/0x6f0 [sunrpc]
[<ffffffffa0232cc3>] svc_process+0x113/0x1b0 [sunrpc]
[<ffffffffa02f740f>] nfsd+0xff/0x170 [nfsd]
[<ffffffffa02f7310>] ? nfsd_destroy+0x80/0x80 [nfsd]
[<ffffffff810bf3a8>] kthread+0xd8/0xf0
[<ffffffff810bf2d0>] ? kthread_create_on_node+0x1b0/0x1b0
[<ffffffff817912a2>] ret_from_fork+0x42/0x70
[<ffffffff810bf2d0>] ? kthread_create_on_node+0x1b0/0x1b0
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2f774424bfdcc2df3e17de0cefe74a4269cad5 ]
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee1f
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776aa ("NFSD: Clean up legacy NFS WRITE argument XDR decoders")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47446d74f1707049067fee038507cdffda805631 ]
nbl allocated in nfsd4_lock can be released by a several ways:
directly in nfsd4_lock(), via nfs4_laundromat(), via another nfs
command RELEASE_LOCKOWNER or via nfsd4_callback.
This structure should be refcounted to be used and released correctly
in all these cases.
Refcount is initialized to 1 during allocation and is incremented
when nbl is added into nbl_list/nbl_lru lists.
Usually nbl is linked into both lists together, so only one refcount
is used for both lists.
However nfsd4_lock() should keep in mind that nbl can be present
in one of lists only. This can happen if nbl was handled already
by nfs4_laundromat/nfsd4_callback/etc.
Refcount is decremented if vfs_lock_file() returns FILE_LOCK_DEFERRED,
because nbl can be handled already by nfs4_laundromat/nfsd4_callback/etc.
Refcount is not changed in find_blocked_lock() because of it reuses counter
released after removing nbl from lists.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40595cdc93edf4110c0f0c0b06f8d82008f23929 ]
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available. (Normally NFSv4 clients just
poll for locks if necessary.) To make that work, we need to request a
blocking lock from the filesystem.
We turned that off for NFS in commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.
Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.
Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing. Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.
So, this patch mostly reverts commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00c0 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem. Also add a little
documentation.
Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd2e999c7c394ae916d8be741418b3c6c1dddea8 ]
Clean up. Trond points out that xdr_stream_decode_uint32_array()
does the same thing as nfsd4_decode_bitmap4().
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dcd1d8aab00c5d3a0a3725253c86440b1a0f5a7 ]
The use of the bitmaps is confusing. Add a cross-reference to make it
easier to find the existing comment. Add an updated reference with URL
to make it quicker to look up. And a bit more editorializing about the
value of this.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70e94d757b3e1f46486d573729d84c8955c81dce ]
Clean up: The garbage_args and cant_encode tracepoints report the
same information as each other, so combine them into a single
tracepoint class to reduce code duplication and slightly reduce the
size of trace.o.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1463b38e7cf34d4cc60f41daff459ad807b2e408 ]
We currently have a 'laundrette' for closing cached files - a different
work-item for each network-namespace.
These 'laundrettes' (aka struct nfsd_fcache_disposal) are currently on a
list, and are freed using rcu.
The list is not necessary as we have a per-namespace structure (struct
nfsd_net) which can hold a link to the nfsd_fcache_disposal.
The use of kfree_rcu is also unnecessary as the cache is cleaned of all
files associated with a given namespace, and no new files can be added,
before the nfsd_fcache_disposal is freed.
So add a '->fcache_disposal' link to nfsd_net, and discard the list
management and rcu usage.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7578b2f628db27281d3165af0aa862311883a858 ]
Commit 7142b98d9fd7 ("nfsd: Clean up drc cache in preparation for
global spinlock elimination"), billed as a clean-up, added
be32_to_cpu() to the DRC hash function without explanation. That
commit removed two comments that state that byte-swapping in the
hash function is unnecessary without explaining whether there was
a need for that change.
On some Intel CPUs, the swab32 instruction is known to cause a CPU
pipeline stall. be32_to_cpu() does not add extra randomness, since
the hash multiplication is done /before/ shifting to the high-order
bits of the result.
As a micro-optimization, remove the unnecessary transform from the
DRC hash function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23a1a573c61ccb5e7829c1f5472d3e025293a031 ]
Now that thread management is consistent there is no need for
nfs-callback to use svc_create_pooled() as introduced in Commit
df807fffaabd ("NFSv4.x/callback: Create the callback service through
svc_create_pooled"). So switch back to svc_create().
If service pools were configured, but the number of threads were left at
'1', nfs callback may not work reliably when svc_create_pooled() is used.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b044fbaab02292fedb17565dbb3f2528083b169 ]
svc_set_num_threads() does everything that lockd_start_svc() does, except
set sv_maxconn. It also (when passed 0) finds the threads and
stops them with kthread_stop().
So move the setting for sv_maxconn, and use svc_set_num_thread()
We now don't need nlmsvc_task.
Now that we use svc_set_num_threads() it makes sense to set svo_module.
This request that the thread exists with module_put_and_exit().
Also fix the documentation for svo_module to make this explicit.
svc_prepare_thread is now only used where it is defined, so it can be
made static.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: address merge conflict with fd2468fa1301 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecd3ad68d2c6d3ae178a63a2d9a02c392904fd36 ]
lockd_create_svc() already does an svc_get() if the service already
exists, so it is more like a "get" than a "create".
So:
- Move the increment of nlmsvc_users into the function as well
- rename to lockd_get().
It is now the inverse of lockd_put().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 865b674069e05e5779fcf8cf7a166d2acb7e930b ]
There is some cleanup that is duplicated in lockd_down() and the failure
path of lockd_up().
Factor these out into a new lockd_put() and call it from both places.
lockd_put() does *not* take the mutex - that must be held by the caller.
It decrements nlmsvc_users and if that reaches zero, it cleans up.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4e2527a63620a820c4ebf3596b57176da26fb3 ]
The normal place to call svc_exit_thread() is from the thread itself
just before it exists.
Do this for lockd.
This means that nlmsvc_rqst is not used out side of lockd_start_svc(),
so it can be made local to that function, and renamed to 'rqst'.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73a2972041bee70eb0cbbb25fa77828c63c916b ]
lockd_start_svc() only needs to be called once, just after the svc is
created. If the start fails, the svc is discarded too.
It thus makes sense to call lockd_start_svc() from lockd_create_svc().
This allows us to remove the test against nlmsvc_rqst at the start of
lockd_start_svc() - it must always be NULL.
lockd_up() only held an extra reference on the svc until a thread was
created - then it dropped it. The thread - and thus the extra reference
- will remain until kthread_stop() is called.
Now that the thread is created in lockd_create_svc(), the extra
reference can be dropped there. So the 'serv' variable is no longer
needed in lockd_up().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a8a7ff57421b7de3ae72019938ffb5daaee36e7 ]
Now that the network status notifiers use nlmsvc_serv rather then
nlmsvc_rqst the management can be simplified.
Notifier unregistration synchronises with any pending notifications so
providing we unregister before nlm_serv is freed no further interlock
is required.
So we move the unregister call to just before the thread is killed
(which destroys the service) and just before the service is destroyed in
the failure-path of lockd_up().
Then nlm_ntf_refcnt and nlm_ntf_wq can be removed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2840fe864c91a0fe822169b1fbfddbcac9aeac43 ]
lockd has two globals - nlmsvc_task and nlmsvc_rqst - but mostly it
wants the 'struct svc_serv', and when it doesn't want it exactly it can
get to what it wants from the serv.
This patch is a first step to removing nlmsvc_task and nlmsvc_rqst. It
introduces nlmsvc_serv to store the 'struct svc_serv*'. This is set as
soon as the serv is created, and cleared only when it is destroyed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d057cfec4940ce6eeffa22b4a71dec203b06cd55 ]
nfsd currently maintains an open-coded read/write semaphore (refcount
and wait queue) for each network namespace to ensure the nfs service
isn't shut down while the notifier is running.
This is excessive. As there is unlikely to be contention between
notifiers and they run without sleeping, a single spinlock is sufficient
to avoid problems.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: ensure nfsd_notifier_lock is static ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ebdbe5203a874614819700d3f470724cb803709 ]
The ->svo_setup callback serves no purpose. It is always called from
within the same module that chooses which callback is needed. So
discard it and call the relevant function directly.
Now that svc_set_num_threads() is no longer used remove it and rename
svc_set_num_threads_sync() to remove the "_sync" suffix.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3409e4f1e8f239f0ed81be0b068ecf4e73e2e826 ]
nfsd cannot currently use svc_set_num_threads_sync. It instead
uses svc_set_num_threads which does *not* wait for threads to all
exit, and has a separate mechanism (nfsd_shutdown_complete) to wait
for completion.
The reason that nfsd is unlike other services is that nfsd threads can
exit separately from svc_set_num_threads being called - they die on
receipt of SIGKILL. Also, when the last thread exits, the service must
be shut down (sockets closed).
For this, the nfsd_mutex needs to be taken, and as that mutex needs to
be held while svc_set_num_threads is called, the one cannot wait for
the other.
This patch changes the nfsd thread so that it can drop the ref on the
service without blocking on nfsd_mutex, so that svc_set_num_threads_sync
can be used:
- if it can drop a non-last reference, it does that. This does not
trigger shutdown and does not require a mutex. This will likely
happen for all but the last thread signalled, and for all threads
being shut down by nfsd_shutdown_threads()
- if it can get the mutex without blocking (trylock), it does that
and then drops the reference. This will likely happen for the
last thread killed by SIGKILL
- Otherwise there might be an unrelated task holding the mutex,
possibly in another network namespace, or nfsd_shutdown_threads()
might be just about to get a reference on the service, after which
we can drop ours safely.
We cannot conveniently get wakeup notifications on these events,
and we are unlikely to need to, so we sleep briefly and check again.
With this we can discard nfsd_shutdown_complete and
nfsd_complete_shutdown(), and switch to svc_set_num_threads_sync.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d3792aefdcda71d20c2b1ecc589c17ae71eb523 ]
There is nothing happening in the start of nfsd() that requires
protection by the mutex, so don't take it until shutting down the thread
- which does still require protection - but only for nfsd_put().
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: address merge conflict with fd2468fa1301 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a36395fac3b72771f87c3ee4387e3a96d85a7cc ]
Using sv_lock means we don't need to hold the service mutex over these
updates.
In particular, svc_exit_thread() no longer requires synchronisation, so
threads can exit asynchronously.
Note that we could use an atomic_t, but as there are many more read
sites than writes, that would add unnecessary noise to the code.
Some reads are already racy, and there is no need for them to not be.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6c8c9bebccd5fb785c306b948c08874a88874d ]
This allows us to move the updates for th_cnt out of the mutex.
This is a step towards reducing mutex coverage in nfsd().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec52361df99b490f6af412b046df9799b92c1050 ]
The use of sv_nrthreads as a general refcount results in clumsy code, as
is seen by various comments needed to explain the situation.
This patch introduces a 'struct kref' and uses that for reference
counting, leaving sv_nrthreads to be a pure count of threads. The kref
is managed particularly in svc_get() and svc_put(), and also nfsd_put();
svc_destroy() now takes a pointer to the embedded kref, rather than to
the serv.
nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This
happens when a transport is created before the first thread is started.
To support this, a 'keep_active' flag is introduced which holds a ref on
the svc_serv. This is set when any listening socket is successfully
added (unless there are running threads), and cleared when the number of
threads is set. So when the last thread exits, the nfs_serv will be
destroyed.
The use of 'keep_active' replaces previous code which checked if there
were any permanent sockets.
We no longer clear ->rq_server when nfsd() exits. This was done
to prevent svc_exit_thread() from calling svc_destroy().
Instead we take an extra reference to the svc_serv to prevent
svc_destroy() from being called.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c62d12740a1450d2e8456d5747f440e10db281a ]
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df5e49c880ea0776806b8a9f8ab95e035272cf6f ]
It is common for 'get' functions to return the object that was 'got',
and there are a couple of places where users of svc_get() would be a
little simpler if svc_get() did that.
Make it so.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b24336f03a8ba560e96b0c47a8434a7fa48e3c ]
If write_ports_add() fails, we shouldn't destroy the serv, unless we had
only just created it. So if there are any permanent sockets already
attached, leave the serv in place.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca3574bd653aba234a4b31955f2778947403be16 ]
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cc3b1ccd930fe6971e1527f0c4f1bdc8cb56026 ]
FAN_RENAME is the successor of FAN_MOVED_FROM and FAN_MOVED_TO
and can be used to get the old and new parent+name information in
a single event.
FAN_MOVED_FROM and FAN_MOVED_TO are still supported for backward
compatibility, but it makes little sense to use them together with
FAN_RENAME in the same group.
FAN_RENAME uses special info type records to report the old and
new parent+name, so reporting only old and new parent id is less
useful and was not implemented.
Therefore, FAN_REANAME requires a group with flag FAN_REPORT_NAME.
Link: https://lore.kernel.org/r/20211129201537.1932819-12-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7326e382c21e9c23c89c88369afdc90b82a14da8 ]
In the special case of FAN_RENAME event, we report old or new or both
old and new parent+name.
A single info record will be reported if either the old or new dir
is watched and two records will be reported if both old and new dir
(or their filesystem) are watched.
The old and new parent+name are reported using new info record types
FAN_EVENT_INFO_TYPE_{OLD,NEW}_DFID_NAME, so if a single info record
is reported, it is clear to the application, to which dir entry the
fid+name info is referring to.
Link: https://lore.kernel.org/r/20211129201537.1932819-11-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bfbcccde6e7a787feabad4645f628f963fe0663 ]
We do not want to report the dirfid+name of a directory whose
inode/sb are not watched, because watcher may not have permissions
to see the directory content.
Use an internal iter_info to indicate to fanotify_alloc_event()
which marks of this group are watching FAN_RENAME, so it can decide
if we need to record only the old parent+name, new parent+name or both.
Link: https://lore.kernel.org/r/20211129201537.1932819-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[JK: Modified code to pass around only mask of mark types matching
generated event]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3982534ba5ce45e890b2f5ef5e7372c1accd14c7 ]
In the special case of FAN_RENAME event, we record both the old
and new parent and name.
Link: https://lore.kernel.org/r/20211129201537.1932819-9-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf984e950c1c3f41d407ed31db33beb996be132 ]
Allow storing a secondary dir fh and name tupple in fanotify_info.
This will be used to store the new parent and name information in
FAN_RENAME event.
Link: https://lore.kernel.org/r/20211129201537.1932819-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a9515ac9e55e68d733bab81bd408463ab1e25b1 ]
fanotify_info buffer is parceled into variable sized records, so the
records must be written in order: dir_fh, file_fh, name.
Use helpers to assert that order and make fanotify_alloc_name_event()
a bit more generic to allow empty dir_fh record and to allow expanding
to more records (i.e. name2) soon.
Link: https://lore.kernel.org/r/20211129201537.1932819-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d9374f095136206a02eb0b6cd9ef94632c1e9f7 ]
The fanotify_info buffer contains up to two file handles and a name.
Use macros to simplify the code that access the different items within
the buffer.
Add assertions to verify that stored fh len and name len do not overflow
the u8 stored value in fanotify_info header.
Remove the unused fanotify_info_len() helper.
Link: https://lore.kernel.org/r/20211129201537.1932819-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e54183fa7047c15819bc155f4c58501d9a9a3489 ]
The dnotify FS_DN_RENAME event is used to request notification about
a move within the same parent directory and was always coupled with
the FS_MOVED_FROM event.
Rename the FS_DN_RENAME event flag to FS_RENAME, decouple it from
FS_MOVED_FROM and report it with the moved dentry instead of the moved
inode, so it has the information about both old and new parent and name.
Generate the FS_RENAME event regardless of same parent dir and apply
the "same parent" rule in the generic fsnotify_handle_event() helper
that is used to call backends with ->handle_inode_event() method
(i.e. dnotify). The ->handle_inode_event() method is not rich enough to
report both old and new parent and name anyway.
The enriched event is reported to fanotify over the ->handle_event()
method with the old and new dir inode marks in marks array slots for
ITER_TYPE_INODE and a new iter type slot ITER_TYPE_INODE2.
The enriched event will be used for reporting old and new parent+name to
fanotify groups with FAN_RENAME events.
Link: https://lore.kernel.org/r/20211129201537.1932819-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d61fd650e9d206a71fda789f02a1ced4b19944c4 ]
FAN_REPORT_FID is ambiguous in that it reports the fid of the child for
some events and the fid of the parent for create/delete/move events.
The new FAN_REPORT_TARGET_FID flag is an implicit request to report
the fid of the target object of the operation (a.k.a the child inode)
also in create/delete/move events in addition to the fid of the parent
and the name of the child.
To reduce the test matrix for uninteresting use cases, the new
FAN_REPORT_TARGET_FID flag requires both FAN_REPORT_NAME and
FAN_REPORT_FID. The convenience macro FAN_REPORT_DFID_NAME_TARGET
combines FAN_REPORT_TARGET_FID with all the required flags.
Link: https://lore.kernel.org/r/20211129201537.1932819-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c9007d62bea6fd164285314f7553f73e5308863 ]
They are two different types that use the same enum, so this confusing.
Use the object type to indicate the type of object mark is attached to
and the iter type to indicate the type of watch.
A group can have two different watches of the same object type (parent
and child watches) that match the same event.
Link: https://lore.kernel.org/r/20211129201537.1932819-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad69cd9972e79aba103ba5365de0acd35770c265 ]
In preparation for separating object type from iterator type, rename
some 'type' arguments in functions to 'obj_type' and remove the unused
interface to clear marks by object type mask.
Link: https://lore.kernel.org/r/20211129201537.1932819-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53b1119a6e5028b125f431a0116ba73510d82a72 ]
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0019b7db1d7ac62c711cda6b357a659d46428fe ]
rtm@csail.mit.edu reports:
> nfsd4_decode_bitmap4() will write beyond bmval[bmlen-1] if the RPC
> directs it to do so. This can cause nfsd4_decode_state_protect4_a()
> to write client-supplied data beyond the end of
> nfsd4_exchange_id.spo_must_allow[] when called by
> nfsd4_decode_exchange_id().
Rewrite the loops so nfsd4_decode_bitmap() cannot iterate beyond
@bmlen.
Reported by: rtm@csail.mit.edu
Fixes: d1c263a031e8 ("NFSD: Replace READ* macros in nfsd4_decode_fattr()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80479eb862102f9513e93fcf726c78cc0be2e3b2 ]
Mandatory locking has been removed. And the rest of this comment is
redundant with the code.
Reported-by: Jeff layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 291cd656da04163f4bba67953c1f2f823e0d1231 ]
./fs/nfsd/nfssvc.c: 1072: 8-9: :WARNING return of 0/1 in function
'nfssvc_decode_voidarg' with return type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2336d696862186fd4a6ddd1ea0cb243b3e32847c ]
I don't know if that Solaris behavior matters any more or if it's still
possible to look up that bug ID any more. The XFS behavior's definitely
still relevant, though; any but the most recent XFS filesystems will
lose the top bits.
Reported-by: Frank S. Filz <ffilzlnx@mindspring.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 130e2054d4a652a2bd79fb1557ddcd19c053cb37 ]
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_encode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fda494411485aff91768842c532f90fb8eb54943 ]
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b0ebb255fdc49a3d340846deebf045ef58ec744 ]
Refactor: Currently nfs4svc_encode_compoundres() relies on the NFS
dispatcher to pass in the buffer location of the COMPOUND status.
Instead, save that buffer location in struct nfsd4_compoundres.
The compound tag follows immediately after.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44b31c263798ec34614dd394c31ef1a2e7e716e ]
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_decode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16c663642c7ec03cd4cee5fec520bb69e97babe4 ]
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR decoder, and can be removed.
Note also that there is a line in each decoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per decoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dae9a6cab8009e526570e7477ce858dcdfeb256e ]
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e70bf27fd20cc17e87150327a640e546bfbee64 ]
Pointer ni is being initialized with plain integer zero. Fix
this by initializing with NULL.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8847ecc9274a14114385d1cb4030326baa0766eb ]
DRC bucket pruning is done by nfsd_cache_lookup(), which is part of
every NFSv2 and NFSv3 dispatch (ie, it's done while the client is
waiting).
I added a trace_printk() in prune_bucket() to see just how long
it takes to prune. Here are two ends of the spectrum:
prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining
prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining
...
prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining
Pruning latency is noticeable on fast transports with fast storage.
By noticeable, I mean that the latency measured here in the worst
case is the same order of magnitude as the round trip time for
cached server operations.
We could do something like moving expired entries to an expired list
and then free them later instead of freeing them right in
prune_bucket(). But simply limiting the number of entries that can
be pruned by a lookup is simple and retains more entries in the
cache, making the DRC somewhat more effective.
Comparison with a 70/30 fio 8KB 12 thread direct I/O test:
Before:
write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets
WRITE:
1848726 ops (30%)
avg bytes sent per op: 8340 avg bytes received per op: 136
backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds)
After:
write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets
WRITE:
1891144 ops (30%)
avg bytes sent per op: 8340 avg bytes received per op: 136
backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9709bd548f11a092d124698118013f66e1740f9b ]
Wire up the FAN_FS_ERROR event in the fanotify_mark syscall, allowing
user space to request the monitoring of FAN_FS_ERROR events.
These events are limited to filesystem marks, so check it is the
case in the syscall handler.
Link: https://lore.kernel.org/r/20211025192746.66445-29-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 130a3c742107acff985541c28360c8b40203559c ]
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error. It also carries an error count,
documenting how many errors were observed since the last reporting.
Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 936d6a38be39177495af38497bf8da1c6128fa1b ]
Plumb the pieces to add a FID report to error records. Since all error
event memory must be pre-allocated, we pre-allocate the maximum file
handle size possible, such that it should always fit.
For errors that don't expose a file handle, report it with an invalid
FID. Internally we use zero-length FILEID_ROOT file handle for passing
the information (which we report as zero-length FILEID_INVALID file
handle to userspace) so we update the handle reporting code to deal with
this case correctly.
Link: https://lore.kernel.org/r/20211025192746.66445-27-krisman@collabora.com
Link: https://lore.kernel.org/r/20211025192746.66445-25-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[Folded two patches into 2 to make series bisectable]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 572c28f27a269f88e2d8d7b6b1507f114d637337 ]
struct fanotify_error_event, at least, is preallocated and isn't able to
to handle arbitrarily large file handles. Future-proof the code by
complaining loudly if a handle larger than MAX_HANDLE_SZ is ever found.
Link: https://lore.kernel.org/r/20211025192746.66445-26-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bd5a5c8e6e5cd964e9738e6ef87f6c2cb453edf ]
Now that there is an event that reports FID records even for a zeroed
file handle, wrap the logic that deides whether to issue the records
into helper functions. This shouldn't have any impact on the code, but
simplifies further patches.
Link: https://lore.kernel.org/r/20211025192746.66445-24-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5069433a3adc01ff9c5673567961bb7f138074 ]
fanotify_error_event would duplicate this sequence of declarations that
already exist elsewhere with a slight different size. Create a helper
macro to avoid code duplication.
Link: https://lore.kernel.org/r/20211025192746.66445-23-krisman@collabora.com
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a6ae64132fd27a944faed7bc38484827609eb76 ]
Error events (FAN_FS_ERROR) against the same file system can be merged
by simply iterating the error count. The hash is taken from the fsid,
without considering the FH. This means that only the first error object
is reported.
Link: https://lore.kernel.org/r/20211025192746.66445-22-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83e9acbe13dc1b767f91b5c1350f7a65689b26f6 ]
Once an error event is triggered, enqueue it in the notification group,
similarly to what is done for other events. FAN_FS_ERROR is not
handled specially, since the memory is now handled by a preallocated
mempool.
For now, make the event unhashed. A future patch implements merging of
this kind of event.
Link: https://lore.kernel.org/r/20211025192746.66445-21-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 734a1a5eccc5f7473002b0669f788e135f1f64aa ]
Pre-allocate slots for file system errors to have greater chances of
succeeding, since error events can happen in GFP_NOFS context. This
patch introduces a group-wide mempool of error events, shared by all
FAN_FS_ERROR marks in this group.
Link: https://lore.kernel.org/r/20211025192746.66445-20-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d11a4f43ef4679be0908026907a7613b33d7127 ]
FAN_FS_ERROR allows reporting of event type FS_ERROR to userspace, which
is a mechanism to report file system wide problems via fanotify. This
commit preallocate userspace visible bits to match the FS_ERROR event.
Link: https://lore.kernel.org/r/20211025192746.66445-19-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fe595cf1c80e7a5af4d00c4da29def64aff57a2 ]
Like inode events, FAN_FS_ERROR will require fid mode. Therefore,
convert the verification during fanotify_mark(2) to require fid for any
non-fd event. This means fid_mode will not only be required for inode
events, but for any event that doesn't provide a descriptor.
Link: https://lore.kernel.org/r/20211025192746.66445-17-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 272531ac619b374ab474e989eb387162fded553f ]
Instead of failing, encode an invalid file handle in fanotify_encode_fh
if no inode is provided. This bogus file handle will be reported by
FAN_FS_ERROR for non-inode errors.
Link: https://lore.kernel.org/r/20211025192746.66445-16-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74fe4734897a2da2ae2a665a5e622cd490d36eaf ]
Allow passing a NULL hash to fanotify_encode_fh and avoid calculating
the hash if not needed.
Link: https://lore.kernel.org/r/20211025192746.66445-15-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12f47bf0f0990933d95d021d13d31bda010648fd ]
FAN_FS_ERROR doesn't support DFID, but this function is still called for
every event. The problem is that it is not capable of handling null
inodes, which now can happen in case of superblock error events. For
this case, just returning dir will be enough.
Link: https://lore.kernel.org/r/20211025192746.66445-14-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 330ae77d2a5b0af32c0f29e139bf28ec8591de59 ]
For group-wide mempool backed events, like FS_ERROR, the free_event
callback will need to reference the group's mempool to free the memory.
Wire that argument into the current callers.
Link: https://lore.kernel.org/r/20211025192746.66445-13-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
