commit 0c84bde4f37ba27d50e4c70ecacd33fe4a57030d upstream.
This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c.
This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.
Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.
As we have no explanation yet, revert.
$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.701179] dw2102: start downloading DW210X firmware
[ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 6.756432] usb 1-1: USB disconnect, device number 2
[ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.862245] dw2102: start downloading DW210X firmware
[ 6.914811] usb 4-1: USB disconnect, device number 2
[ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[ 7.014538] usbcore: registered new interface driver dw2102
Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/
Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c ]
Infinite log printing occurs during fuzz test:
rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ...
...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ...
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
...
dvb-usb: bulk message failed: -22 (1/0)
Looking into the codes, there is a loop in dvb_usb_read_remote_control(),
that is in rc_core_dvb_usb_remote_init() create a work that will call
dvb_usb_read_remote_control(), and this work will reschedule itself at
'rc_interval' intervals to recursively call dvb_usb_read_remote_control(),
see following code snippet:
rc_core_dvb_usb_remote_init() {
...
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
...
}
dvb_usb_read_remote_control() {
...
err = d->props.rc.core.rc_query(d);
if (err)
err(...) // Did not return even if query failed
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
}
When the infinite log printing occurs, the query callback
'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to
the failure of finding a valid 'generic_bulk_ctrl_endpoint'
in usb_bulk_msg(), see following code snippet:
cxusb_rc_query() {
cxusb_ctrl_msg() {
dvb_usb_generic_rw() {
ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint),...);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
...
}
...
}
By analyzing the corresponding USB descriptor, it shows that the
bNumEndpoints is 0 in its interface descriptor, but
the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure
a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this
'invalid' USB device should be rejected before it calls into
dvb_usb_read_remote_control().
To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'.
And as Sean suggested, the same check and clear halts should be done for
'generic_bulk_ctrl_endpoint_response'. So introduce
dvb_usb_check_bulk_endpoint() to do it for both of them.
Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
