[ Upstream commit aaa8736370db1a78f0e8434344a484f9fd20be3b ]
When building with CONFIG_XEN_PV=y, .text symbols are emitted into
the .notes section so that Xen can find the "startup_xen" entry point.
This information is used prior to booting the kernel, so relocations
are not useful. In fact, performing relocations against the .notes
section means that the KASLR base is exposed since /sys/kernel/notes
is world-readable.
To avoid leaking the KASLR base without breaking unprivileged tools that
are expecting to read /sys/kernel/notes, skip performing relocations in
the .notes section. The values readable in .notes are then identical to
those found in System.map.
Reported-by: Guixiong Wei <guixiongwei@gmail.com>
Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/
Fixes: 5ead97c84fa7 ("xen: Core Xen implementation")
Fixes: da1a679cde9b ("Add /sys/kernel/notes")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79978bff2e4b8e05ebdf5fc3ee6b794002393484 ]
We identified that the PHYs actually do not work since commit 7da7b84fee58
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.
The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.
Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.
With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a8f
("net: dsa: qca8k: fix illegal usage of GPIO")
The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.
To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.
Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023bd910d3ab735459f84b22bb99fb9e00bd9d76 ]
This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.
Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7da7b84fee58c85a6075022023d31edea40e81a1 ]
Drop the phy-reset-duration and phy-reset-gpios deprecated properties and
move reset-gpios under the switch node.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: 023bd910d3ab ("ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3baa4c5143d65ebab2de0d99a395e5f4f1f46608 ]
When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete. In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.
Fix this by using the modern "mtd-rom" compatible value instead.
Fixes: 5c3f5edbe0a1dff3 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The Link tag has all the details but basically due to missing upstream
commits, the header which contains __text_gen_insn() is not in the
includes in paravirt.c, leading to:
arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' \
[-Werror=implicit-function-declaration]
65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
| ^~~~~~~~~~~~~~~
Add the missing include.
Reported-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ZeYXvd1-rVkPGvvW@telecaster
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]
Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:
arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
82 | int ftrace_enable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
88 | int ftrace_disable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32019c659ecfe1d92e3bf9fcdfbb11a7c70acd58 ]
When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:
BUG: unable to handle page fault for address: ffffffffff600000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
......
Call Trace:
<TASK>
? copy_from_kernel_nofault+0x6f/0x110
bpf_probe_read_kernel+0x1d/0x50
bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
trace_call_bpf+0xc5/0x1c0
perf_call_bpf_enter.isra.0+0x69/0xb0
perf_syscall_enter+0x13e/0x200
syscall_trace_enter+0x188/0x1c0
do_syscall_64+0xb5/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
......
---[ end trace 0000000000000000 ]---
The oops is triggered when:
1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().
2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.
3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.
Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0e39a63b78849f8abbef268b13e4838569f646 ]
Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for
copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6e21ddf20293b3880ae55b9d14de91c5891c59 ]
Clear Cause.BD after we use instruction_pointer_set to override
EPC.
This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3693bb4465e6e32a204a5b86d3ec7e6b9f7e67c2 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 386093c68ba3e8bcfe7f46deba901e0e80713c29 ]
There doesn't seem to be any reason for the rpath being set in
the binaries, at on systems that I tested on. On the other hand,
setting rpath is actually harming binaries in some cases, e.g.
if using nix-based compilation environments where /lib & /lib64
are not part of the actual environment.
Add a new Kconfig option (under EXPERT, for less user confusion)
that allows disabling the rpath additions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Stable-dep-of: 846cfbeed09b ("um: Fix adding '-no-pie' for clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6890cb1ace350b4386c8aee1343dc3b3ddd214da upstream.
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a11dd49dcb9376776193e15641f84fcc1e5980c9 ]
Offset vmemmap so that the first page of vmemmap will be mapped
to the first page of physical memory in order to ensure that
vmemmap’s bounds will be respected during
pfn_to_page()/page_to_pfn() operations.
The conversion macros will produce correct SV39/48/57 addresses
for every possible/valid DRAM_BASE inside the physical memory limits.
v2:Address Alex's comments
Suggested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Reported-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Closes: https://lore.kernel.org/linux-riscv/20240202135030.42265-1-csd4492@csd.uoc.gr
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240229191723.32779-1-dvlachos@ics.forth.gr
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 723a2cc8d69d4342b47dfddbfe6c19f1b135f09b ]
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn")
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Upstream commit: 095b8303f3835c68ac4a8b6d754ca1c3b6230711
There is infrastructure to rewrite return thunks to point to any
random thunk one desires, unwrap that from CALL_THUNKS, which up to
now was the sole user of that.
[ bp: Make the thunks visible on 32-bit and add ifdeffery for the
32-bit builds. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.775293785@infradead.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 08f7cfd44f77b2796582bc26164fdef44dd33b6c.
Revert the backport of upstream commit:
095b8303f383 ("x86/alternative: Make custom return thunk unconditional")
in order to backport the full version now that
770ae1b70952 ("x86/returnthunk: Allow different return thunks")
has been backported.
Revert it here so that the build breakage is kept at minimum.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit: 770ae1b709528a6a173b5c7b183818ee9b45e376
In preparation for call depth tracking on Intel SKL CPUs, make it possible
to patch in a SKL specific return thunk.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111147.680469665@infradead.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3eb602ad6a94a76941f93173131a71ad36fa1324.
Revert the backport of upstream commit
1f001e9da6bb ("x86/ftrace: Use alternative RET encoding")
in favor of a proper backport after backporting the commit which adds
__text_gen_insn().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf87a0dc26d0550c60edc911cda42f9afec3557 upstream.
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org
Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d3a7dfb801d157ac423261d7cd62c33e95375f8 upstream.
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
Cc: stable@vger.kernel.org
Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85a71ee9a0700f6c18862ef3b0011ed9dad99aca upstream.
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org
Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1df931d95f4dc1c11db1123e85d4e08156e46ef9 upstream.
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215a2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d2ffcdd2a982e8bbe65fa0f94fb21bf304c281e ]
POWER10 DD1 has an issue where it generates watchpoint exceptions when
it shouldn't. The conditions where this occur are:
- octword op
- ending address of DAWR range is less than starting address of op
- those addresses need to be in the same or in two consecutive 512B
blocks
- 'op address + 64B' generates an address that has a carry into bit
52 (crosses 2K boundary)
Handle such spurious exception by considering them as extraneous and
emulating/single-steeping instruction without generating an event.
[ravi: Fixed build warning reported by lkp@intel.com]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201106045650.278987-1-ravi.bangoria@linux.ibm.com
Stable-dep-of: 27646b2e02b0 ("powerpc/watchpoints: Annotate atomic context in more places")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 989b5db215a2f22f89d730b607b071d964780f10 ]
Add support for CMPXCHG loops on userspace addresses. Provide both an
"unsafe" version for tight loops that do their own uaccess begin/end, as
well as a "safe" version for use cases where the CMPXCHG is not buried in
a loop, e.g. KVM will resume the guest instead of looping when emulation
of a guest atomic accesses fails the CMPXCHG.
Provide 8-byte versions for 32-bit kernels so that KVM can do CMPXCHG on
guest PAE PTEs, which are accessed via userspace addresses.
Guard the asm_volatile_goto() variation with CC_HAS_ASM_GOTO_TIED_OUTPUT,
the "+m" constraint fails on some compilers that otherwise support
CC_HAS_ASM_GOTO_OUTPUT.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2b96e42a0284c4fc03022236f656a085ca714a ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109
Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 ]
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Disabling CONFIG_RT_SCHED_GROUP to mitigate potential memory management (MM) issues, including increased memory pressure, fragmentation, and memory leaks that can arise from real-time scheduling.
CONFIG_NETFILTER_XT_TARGET_TRACE is a Linux kernel configuration option that enables the xt_trace module in the Netfilter framework. The xt_trace module is used to trace the passage of packets through firewall filtering rules, allowing network administrators to identify the sequence of rules that each packet passes through.
However, it is recommended to disable this option in most production cases. There are a few reasons for this:
1. Performance: Enabling packet tracking can result in significant system overhead as it requires each packet to be logged and tracked by all firewall rules.
2. Security: Packet tracking can provide detailed information about firewall behavior and which rules are being used. This can be exploited by an attacker to gain information about the network topology and plan more effective attacks.
3. Limited usefulness: In production environments, the usefulness of package tracking may be limited. Typically, it is more important to ensure that firewall rules are configured correctly and to ensure that security policies are applied correctly rather than individually tracking each packet.
Because of these reasons, the CONFIG_NETFILTER_XT_TARGET_TRACE configuration option is often recommended to be disabled in production environments. It is important to carefully evaluate the need for package tracking before enabling it in a production environment.
Signed-off-by: TogoFire <togofire@mailfence.com>
[ Upstream commit e1a9ae45736989c972a8d1c151bc390678ae6205 ]
max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
+-> free_area_init()
+-> memmap_init()
+-> memmap_init_zone_range()
+-> init_unavailable_range()
Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:
> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...
Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.
Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d794734c9bbfe22f86686dc2909c25f5ffe1a572 upstream.
When ident_pud_init() uses only gbpages to create identity maps, large
ranges of addresses not actually requested can be included in the
resulting table; a 4K request will map a full GB. On UV systems, this
ends up including regions that will cause hardware to halt the system
if accessed (these are marked "reserved" by BIOS). Even processor
speculation into these regions is enough to trigger the system halt.
Only use gbpages when map creation requests include the full GB page
of space. Fall back to using smaller 2M pages when only portions of a
GB page are included in the request.
No attempt is made to coalesce mapping requests. If a request requires
a map entry at the 2M (pmd) level, subsequent mapping requests within
the same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full
gbpage. Existing usage starts with larger regions and then adds
smaller regions, so this should not have any great consequence.
[ dhansen: fix up comment formatting, simplifty changelog ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6a1892585cd19e63c4ef2334e26cd536d5b678d upstream.
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a7aee96200ad281a5cc4cf5c7a2e2a49d2b97b0 ]
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address.
Fixes: 663c0c9496a6 ("powerpc/kasan: Fix shadow area set up for modules.")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1705974359-43790-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d55347bfe4e66dce2e1e7501e5492f4af3e315f8 ]
After 'lib: checksum: Use aligned accesses for ip_fast_csum and
csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test
started failing for all mips platforms, both little and bit endian.
Oddly enough, adding debug code into test_csum_ipv6_magic() made the
problem disappear.
The gcc manual says:
"The "memory" clobber tells the compiler that the assembly code performs
memory reads or writes to items other than those listed in the input
and output operands (for example, accessing the memory pointed to by one
of the input parameters)
"
This is definitely the case for csum_ipv6_magic(). Indeed, adding the
'memory' clobber fixes the problem.
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d748f60a4b82b50bf25fad1bd42d33f049f76aa ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:
arch/um/drivers/net_kern.c:353:21: warning: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Wincompatible-function-pointer-types-strict]
353 | .ndo_start_xmit = uml_net_start_xmit,
| ^~~~~~~~~~~~~~~~~~
1 warning generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of uml_net_start_xmit()
to match the prototype's to resolve the warning. While UML does not
currently implement support for kCFI, it could in the future, which
means this warning becomes a fatal CFI failure at run time.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310031340.v1vPh207-lkp@intel.com/
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236f9fe39b02c15fa5530b53e9cca48354394389 ]
The threads allocated inside the kernel have only a single page of
stack. Unfortunately, the vfprintf function in standard glibc may use
too much stack-space, overflowing it.
To make os_info safe to be used by helper threads, use the kernel
vscnprintf function into a smallish buffer and write out the information
to stderr.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 541d4e4d435c8b9bfd29f70a1da4a2db97794e0a ]
__cant_sleep was already used and exported by the scheduler.
The name had to be changed to a UML specific one.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 858d83ca4b50bbc8693d95cc94310e6d791fb2e6 ]
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.
Change it to fix the following dt-schema warning.
imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$'
from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3aa1a82fb20ee97597022f6528823a8ab82bde6 ]
The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.
Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.
This fixes the following schema warnings:
imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc35e253d032b959d92e12f081db5b00db26ae64 ]
Per leds-gpio.yaml, the led names should start with 'led'.
Change it to fix the following dt-schema warning:
imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ]
Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.
Change it accordingly to fix the following dt-schema warning:
imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0b929f58719fc57a4926ab4fc972f185453d6a5 ]
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Use it as "fsl,imx25-iim" to fix the following dt-schema warning:
imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c248e535973088ba7071ff6f26ab7951143450af ]
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
The node name should be sram.
Change the node name and pass the required properties to fix the
following dt-schema warnings:
imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fb7b2a2f06bb3f8321cf26c33e4e820c5b238b6 ]
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
Pass them to fix the following dt-schema warnings:
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e1d7cc478fb16816de09740e3c323c0c188d58f ]
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.
Change it to 'flash@0,0' to fix the following dt-schema warning:
imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
