[ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ]
In ice_sched_add_root_node() and ice_sched_add_node() there are calls to
devm_kcalloc() in order to allocate memory for array of pointers to
'ice_sched_node' structure. But incorrect types are used as sizeof()
arguments in these calls (structures instead of pointers) which leads to
over allocation of memory.
Adjust over allocation of memory by correcting types in devm_kcalloc()
sizeof() arguments.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ]
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.
Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f66f26703093886db81f0610b97a6794511917c ]
In 'ath9k_get_et_stats()', promote TX stats counters to 'u64'
to avoid possible integer overflow. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240725111743.14422-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65e6a2773d655172143cc0b927cdc89549842895 ]
Remove locks calls in usbtv_video_free() because
are useless and may led to a deadlock as reported here:
https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000
Also remove usbtv_stop() call since it will be called when
unregistering the device.
Before 'c838530d230b' this issue would only be noticed if you
disconnect while streaming and now it is noticeable even when
disconnecting while not streaming.
Fixes: c838530d230b ("media: media videobuf2: Be more flexible on the number of queue stored buffers")
Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix minor spelling mistake in log message]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4a1adbed2582444aaf97671858b7d12915bd05 ]
In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible that the controller detects a spurious I2C "start" condition.
In this situation it may continue to report the bus is busy indefinitely
and block the controller from working.
The "single-master" DT flag can be specified to disable bus busy checks
entirely, but this may not be safe to use in situations where other I2C
masters may potentially exist.
In the event that the controller reports "bus busy" for too long when
starting a transaction, we can try reinitializing the controller to see
if the busy condition clears. This allows recovering from this scenario.
Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee1691d0ae103ba7fd9439800ef454674fadad27 ]
xiic_start_xfer can fail for different reasons:
- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg
- ETIMEDOUT: timed-out trying to clear the RX fifo
- EINVAL: wrong clock settings
Both EINVAL and ETIMEDOUT will currently print a specific error
message followed by a generic one, for example:
Failed to clear rx fifo
Error xiic_start_xfer
however EBUSY will simply output the generic message:
Error xiic_start_xfer
which is not really helpful.
This commit adds a new error message when a busy condition is detected
and also removes the generic message since it does not provide any
relevant information to the user.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d663d93bb47e7ab45602b227701022d8aa16040a ]
The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference.
Fixes: fdacc3c7405d ("i2c: xiic: Switch from waitqueue to completion")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 294b29f15469e90893c2b72a738a962ee02a12eb ]
In case the XIIC does TX/RX transfer, make sure no other kernel thread
can start another TX transfer at the same time. This could happen since
the driver only checks tx_msg for being non-NULL and returns -EBUSY in
that case, however it is necessary to check also rx_msg for the same.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdacc3c7405d1fc33c1f2771699a4fc24551e480 ]
There will never be threads queueing up in the xiic_xmit(), use
completion synchronization primitive to wait for the interrupt
handler thread to complete instead as it is much better fit and
there is no need to overload it for this purpose.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c119e7d00c916881913011e6f4c6ac349a41e4e2 ]
The tx_msg is set from multiple places, sometimes without locking,
which fall apart on any SMP system. Only ever access tx_msg inside
the driver mutex.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45c0de18ff2dc9af01236380404bbd6a46502c69 ]
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied.
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.pl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09573b1cc76e7ff8f056ab29ea1cdc152ec8c653 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/20240911094234.1922418-1-ruanjinjie@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec793155894140df7421d25903de2e6bc12c695b ]
Collecting crdump involves reading vsc registers from pci config space
of mlx device, which can take long time to complete. This might result
in starving other threads waiting to run on the cpu.
Numbers I got from testing ConnectX-5 Ex MCX516A-CDAT in the lab:
- mlx5_vsc_gw_read_block_fast() was called with length = 1310716.
- mlx5_vsc_gw_read_fast() reads 4 bytes at a time. It was not used to
read the entire 1310716 bytes. It was called 53813 times because
there are jumps in read_addr.
- On average mlx5_vsc_gw_read_fast() took 35284.4ns.
- In total mlx5_vsc_wait_on_flag() called vsc_read() 54707 times.
The average time for each call was 17548.3ns. In some instances
vsc_read() was called more than one time when the flag was not set.
As expected the thread released the cpu after 16 iterations in
mlx5_vsc_wait_on_flag().
- Total time to read crdump was 35284.4ns * 53813 ~= 1.898s.
It was seen in the field that crdump can take more than 5 seconds to
complete. During that time mlx5_vsc_wait_on_flag() did not release the
cpu because it did not complete 16 iterations. It is believed that pci
config reads were slow. Adding cond_resched() every 128 register read
improves the situation. In the common case the, crdump takes ~1.8989s,
the thread yields the cpu every ~4.51ms. If crdump takes ~5s, the thread
yields the cpu every ~18.0ms.
Fixes: 8b9d8baae1de ("net/mlx5: Add Crdump support")
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bcae12c795f32ddfbf8c80d1b5f1d3286341c32 ]
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure.
Fixes: 5af75c747e2a ("net/mlx5e: Enhanced TX MPWQE for SKBs")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit addf89774e48c992316449ffab4f29c2309ebefb ]
If REGMAP_SPI is m and IEEE802154_MCR20A is y,
mcr20a.c:(.text+0x3ed6c5b): undefined reference to `__devm_regmap_init_spi'
ld: mcr20a.c:(.text+0x3ed6cb5): undefined reference to `__devm_regmap_init_spi'
Select REGMAP_SPI for IEEE802154_MCR20A to fix it.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/20240909131740.1296608-1-ruanjinjie@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc09f007caed3b2f6a3b6bd7e13777557ae22bfd ]
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e92d87c9c5d769e4cb1dd7c90faa38dddd7e52e3 ]
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module
properly autoloaded based on the alias from of_device_id table. It
should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match',
just fix it.
Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0df874c6712d9aa8f43c50ec887a21f7b86fc917 upstream.
dev_err_probe() already prints the error code in a human readable way, so
there is no need to duplicate it as a numerical value at the end of the
message.
Fixes: 12f62a857c83 ("spi: lpspi: Silence error message upon deferred probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-By: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/253543c462b765eca40ba54c66f4e3fdf4acdeb7.1659735546.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1db4da55070d6a2754efeb3743f5312fc32f5961 upstream.
In accordance with the existing comment and code analysis
it is quite likely that there is a missed 'else' when adapter
times out. Add it.
Fixes: 5bc1200852c3 ("i2c: Add Intel SCH SMBus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93701d3b84ac5f3ea07259d4ced405c53d757985 upstream.
When the i2c bus recovery occurs, driver will send i2c stop command
in the scl low condition. In this case the sw state will still keep
original situation. Under multi-master usage, i2c bus recovery will
be called when i2c transfer timeout occurs. Update the stop command
calling with aspeed_i2c_do_stop function to update master_state.
Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f81dfa3b57c624c56f2bff171c431bc7f5b558f2 ]
PCI xHC host should be stopped and xhci driver memory freed before putting
host to PCI D3 state during PCI remove callback.
Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around
and set the host to D3 before calling usb_hcd_pci_remove(dev), which will
access the host to stop it, and then free xhci.
Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62c5a01a5711c8e4be8ae7b6f0db663094615d48 ]
In parport_attach, the return value of ida_alloc is unchecked, witch leads
to the use of an invalid index value.
To address this issue, index should be checked. When the index value is
abnormal, the device should be freed.
Found by code review, compile tested only.
Cc: stable@vger.kernel.org
Fixes: fb56d97df70e ("pps: client: use new parport device model")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20240828131814.3034338-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55dbc5b5174d0e7d1fa397d05aa4cb145e8b887e ]
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Link: https://lkml.kernel.org/r/9f681747d446b874952a892491387d79ffe565a9.1713089394.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 62c5a01a5711 ("pps: add an error check in parport_attach")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93907620b308609c72ba4b95b09a6aa2658bb553 ]
The write code path touches the bbu member in a non atomic manner
without taking the spinlock. Fix it.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912132126.1034743-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035 ]
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
Whilst we're at it, let's define some magic numbers to increase
readability and ease of maintenance.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-9-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 93907620b308 ("USB: misc: yurex: fix race between read and write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c774f2564c0086c23f5269fd4691f233756bf075 ]
If device is unbound, the soc_dev should be unregistered to prevent
memory leak.
Fixes: a2974c9c1f83 ("soc: add driver for the ARM RealView")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-3-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4f26a41f9d052f334f6ae629e01f598ed93508 ]
If device is unbound, the memory allocated for soc_dev_attr should be
freed to prevent leaks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-2-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: c774f2564c00 ("soc: versatile: realview: fix soc_dev leak during device remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 ]
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2,
and INTD in bit 3. Hardware IRQ numbers start at 0, and we register
PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0.
Remove the subtraction of one.
This bug would cause INTx interrupts not to be delivered, as enabling INTB
would actually enable INTA, and enabling INTA wouldn't enable anything at
all. It is likely that this got overlooked for so long since most PCIe
hardware uses MSIs. This fixes the following UBSAN error:
UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268
Hardware name: xlnx,zynqmp (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
dump_stack (lib/dump_stack.c:114)
__ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387)
nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1))
irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
__irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
irq_startup (kernel/irq/chip.c:270)
__setup_irq (kernel/irq/manage.c:1800)
request_threaded_irq (kernel/irq/manage.c:2206)
pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348)
Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts")
Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56427068a8d796bb7b8e297f2b6e947380e383f ]
Going through a full irq descriptor lookup instead of just using the proper
helper function which provides direct access is suboptimal.
In fact it _is_ wrong because the chip callback needs to get the chip data
which is relevant for the chip while using the irq descriptor variant
returns the irq chip data of the top level chip of a hierarchy. It does not
matter in this case because the chip is the top level chip, but that
doesn't make it more correct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201210194044.364211860@linutronix.de
Stable-dep-of: 0199d2f2bd8c ("PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a71ed5898dfae68262f79277915d1dfe34586bc6 upstream.
"iw dev wlp2s0 station dump" shows incorrect rx bitrate:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1
This is because the RX band width is calculated incorrectly. Fix the
calculation according to the phydm_rxsc_2_bw() function from the
official drivers.
After:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1
It also works correctly with the AP configured for 20 MHz and 40 MHz.
Tested with RTL8822CE.
Cc: stable@vger.kernel.org
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77d48d39e99170b528e4f2e9fc5d1d64cdedd386 upstream.
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a98cfe6ff15b62f94a44d565607a16771c847bc6 upstream.
Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might
have GMxXGxX as the board name instead of GMxXGxx.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bb1e7d027413835b086aed35bc3f0713bc0f72b upstream.
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory.
Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-1-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream.
If the net_conf pointer is NULL and the code attempts to access its
fields without a check, it will lead to a null pointer dereference.
Add a NULL check before dereferencing the pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f02b5af3a4482b216e6a466edecf6ba8450fa45 upstream.
The violation of atomicity occurs when the drbd_uuid_set_bm function is
executed simultaneously with modifying the value of
device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while
device->ldev->md.uuid[UI_BITMAP] passes the validity check when its
value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is
written to zero. In this case, the check in drbd_uuid_set_bm might refer
to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking),
which allows an invalid value to pass the validity check, resulting in
inconsistency.
To address this issue, it is recommended to include the data validity
check within the locked section of the function. This modification
ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not
change during the validation process, thereby maintaining its integrity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations.
Fixes: 9f2247bb9b75 ("drbd: Protect accesses to the uuid set with a spinlock")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20240913083504.10549-1-chenqiuji666@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce3d2d6b150ba8528f3218ebf0cee2c2c572662d upstream.
In case of sev PLATFORM_STATUS failure, sev_get_api_version() fails
resulting in sev_data field of psp_master nulled out. This later becomes
a problem when unloading the ccp module because the device has not been
unregistered (via misc_deregister()) before clearing the sev_data field
of psp_master. As a result, on reloading the ccp module, a duplicate
device issue is encountered as can be seen from the dmesg log below.
on reloading ccp module via modprobe ccp
Call Trace:
<TASK>
dump_stack_lvl+0xd7/0xf0
dump_stack+0x10/0x20
sysfs_warn_dup+0x5c/0x70
sysfs_create_dir_ns+0xbc/0xd
kobject_add_internal+0xb1/0x2f0
kobject_add+0x7a/0xe0
? srso_alias_return_thunk+0x5/0xfbef5
? get_device_parent+0xd4/0x1e0
? __pfx_klist_children_get+0x10/0x10
device_add+0x121/0x870
? srso_alias_return_thunk+0x5/0xfbef5
device_create_groups_vargs+0xdc/0x100
device_create_with_groups+0x3f/0x60
misc_register+0x13b/0x1c0
sev_dev_init+0x1d4/0x290 [ccp]
psp_dev_init+0x136/0x300 [ccp]
sp_init+0x6f/0x80 [ccp]
sp_pci_probe+0x2a6/0x310 [ccp]
? srso_alias_return_thunk+0x5/0xfbef5
local_pci_probe+0x4b/0xb0
work_for_cpu_fn+0x1a/0x30
process_one_work+0x203/0x600
worker_thread+0x19e/0x350
? __pfx_worker_thread+0x10/0x10
kthread+0xeb/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for sev with -EEXIST, don't try to register things with the same name in the same directory.
ccp 0000:22:00.1: sev initialization failed
ccp 0000:22:00.1: psp initialization failed
ccp 0000:a2:00.1: no command queues available
ccp 0000:a2:00.1: psp enabled
Address this issue by unregistering the /dev/sev before clearing out
sev_data in case of PLATFORM_STATUS failure.
Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Pavan Kumar Paluri <papaluri@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream.
The write to RP2_GLOBAL_CMD followed by an immediate read of
RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write,
however by then the device is already in reset and cannot respond to a
memory cycle access.
On platforms such as the Raspberry Pi 4 and others using the
pcie-brcmstb.c driver, any memory access to a device that cannot respond
is met with a fatal system error, rather than being substituted with all
1s as is usually the case on PC platforms.
Swapping the delay and the read ensures that the device has finished
resetting before we attempt to read from it.
Fixes: 7d9f49afa451 ("serial: rp2: New driver for Comtrol RocketPort 2 cards")
Cc: stable <stable@kernel.org>
Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e5311aa8022107d63c54e2f03684ec097d1394 upstream.
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously.
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Fixes: abb139e75c2c ("firmware: teach the kernel to load firmware files directly from the filesystem")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240828-firmware-traversal-v3-1-c76529c63b5f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b41c1fa155ba56d125885b0191aabaf3c508d0a3 upstream.
TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns
two values. Racing with set_serial it can return an inconsistent
result. The mutex must be taken.
In terms of logic the bug is as old as the driver. In terms of
code it goes back to the conversion to the get_serial and
set_serial methods.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 99f75a1fcd865 ("cdc-acm: switch to ->[sg]et_serial()")
Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49cd2f4d747eeb3050b76245a7f72aa99dbd3310 upstream.
As we process the second byte of a control transfer, transfers
of less than 2 bytes must be discarded.
This bug is as old as the driver.
SIgned-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912125449.1030536-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8265d06b7794493d82c5c21a12d7ba43eccc30cb upstream.
There is a small window during probing when IO is running
but the backlight is not registered. Processing events
during that time will crash. The completion handler
needs to check for a backlight before scheduling work.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912123317.1026049-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c03fca619fc687338a3b6511fdbed94096abdf79 upstream.
[WHY]
The calculated vtotal may has 1 line deviation. To get precisely
vtotal number, round the vtotal result.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01eed86d50af9fab27d876fd677b86259ebe9de3 upstream.
There might be devices out in the wild where the board name is GMxXGxx
instead of GMxXGxX.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3870e2850b56306d1d1e435c5a1ccbccd7c59291 upstream.
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e06edf96dea065dd1d9df695bf8b92784992333e upstream.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240905164851.771578-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d05b5e0baf424c8c4b4709ac11f66ab726c8deaf upstream.
The current initialization of the struct x86_cpu_id via
pl4_support_ids[] is partial and wrong. It is initializing
"stepping" field with "X86_FEATURE_ANY" instead of "feature" field.
Use X86_MATCH_INTEL_FAM6_MODEL macro instead of initializing
each field of the struct x86_cpu_id for pl4_supported list of CPUs.
This X86_MATCH_INTEL_FAM6_MODEL macro internally uses another macro
X86_MATCH_VENDOR_FAM_MODEL_FEATURE for X86 based CPU matching with
appropriate initialized values.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/lkml/28ead36b-2d9e-1a36-6f4e-04684e420260@intel.com
Fixes: eb52bc2ae5b8 ("powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC")
Fixes: b08b95cf30f5 ("powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P")
Fixes: 515755906921 ("powercap: RAPL: Add Power Limit4 support for RaptorLake")
Fixes: 1cc5b9a411e4 ("powercap: Add Power Limit4 support for Alder Lake SoC")
Fixes: 8365a898fe53 ("powercap: Add Power Limit4 support")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Ricardo: I only kept TIGERLAKE in pl4_support_ids as only this model is
enumerated before this changeset. ]
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d176708ffc20332d1c730098d2b111e0b77ece82 upstream.
Use the new soc_intel_is_byt() helper from linux/platform_data/x86/soc.h.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131143539.109142-5-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Ricardo: Resolved minor cherry-pick conflict. The file linux/regulator/
consumer.h is not #included in the upstream version but it is in
v5.10.y. ]
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5109b60ee4fcb2f2bb24f589575e10cc5283ad4 ]
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Fixes: 6fd9c53f7186 ("net: seeq: Convert timers to use timer_setup()")
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8691cd0fc11197515ed148de0780d927bfca38b ]
This reverts commit fa247089de9936a46e290d4724cb5f0b845600f5.
The following sequence of commands causes a livelock - there will be
workqueue process looping and consuming 100% CPU:
dmsetup create --notable test
truncate -s 1MiB testdata
losetup /dev/loop0 testdata
dmsetup load test --table '0 2048 linear /dev/loop0 0'
dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync
The livelock is caused by the commit fa247089de99. The commit claims that
it fixes a race condition, however, it is unknown what the actual race
condition is and what program is involved in the race condition.
When the inactive table is loaded, the nodes /dev/dm-0 and
/sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When
the device is suspended and resumed, the nodes /dev/mapper/test and
/dev/disk/* are created.
If some program opens a block device before it is created by dmsetup or
lvm, the program is buggy, so dm could just report an error as it used to
do before.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02e9e9366fefe461719da5d173385b6685f70319 ]
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 2cf1ba9a4d15 ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240816031900.18013-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e68470f4e80a4120e9ecec408f6ab4ad386bd4a ]
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Stable-dep-of: 02e9e9366fef ("vhost_vdpa: assign irq bypass producer token correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc7db1cb94ad664546d70212699f8cc6c539e8c ]
Add the generic icc sync_state callback to ensure interconnect votes
are taken into account, instead of being pegged at maximum values.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-8250icc_syncstate-v1-1-7ce78ba6e04c@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 059fe4f8bbdf5cad212e1aeeb3e8968c80b9ff3b ]
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation
Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc4594b54dbaaba40dc8884ad3d42083de39434 ]
gpiod_set_array_value was misused here: the implementation relied on the
assumption that an unsigned long was required for each gpio, while the
function expects a bit array stored in "as much unsigned long as needed
for storing one bit per GPIO", i.e it is using a bit field.
This leaded to incorrect parameter passed to gpiod_set_array_value, that
would set 1 value instead of 3.
It also prevents to select the software mode correctly for the AD7606B.
Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")
Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f02bff30114f385d53ae3e45141db602923bca5d ]
The requested DMA channels are never released. Do this in .remove as well
as in .probe. spi_register_controller() can return -EPROBE_DEFER if
cs-gpios are not probed yet.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211109103134.184216-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3b577de206d5 ("spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1501ae7479c8d0f66efdbfdc9ae8d6136cefbd37 ]
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e229897d373a87ee09ec5cc4ecd4bb2f895fc16b ]
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e766e6a92410ca269161de059fff0843b8ddd65f ]
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe51f6254d81f5a69c31df16353d6539b2b51630 ]
When allocating MTT hem, for each hop level of each hem that is being
allocated, the driver iterates the hem list to find out whether the
bt page has been allocated in this hop level. If not, allocate a new
one and splice it to the list. The time complexity is O(n^2) in worst
cases.
Currently the allocation for-loop uses 'unit' as the step size. This
actually has taken into account the reuse of last-hop-level MTT bt
pages by multiple buffer pages. Thus pages of last hop level will
never have been allocated, so there is no need to iterate the hem list
in last hop level.
Removing this unnecessary iteration can reduce the time complexity to
O(n).
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d586628b169d14bbf36be64d2b3ec9d9d2fe0432 ]
The max value of 'unit' and 'hop_num' is 2^24 and 2, so the value of
'step' may exceed the range of u32. Change the type of 'step' to u64.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f704d8cc07269f31daf9bdafe84882ad7596a2c ]
Split the hem_list_alloc_root_bt() into serval small functions to make the
code flow more clear.
Link: https://lore.kernel.org/r/1621589395-2435-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: d586628b169d ("RDMA/hns: Fix the overflow risk of hem_list_calc_ba_range()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ]
Parts of the suspend and resume chain is left unprotected if we disable
the WDT here.
>From experiments we can see that the SCU disables and re-enables the WDT
when we enter and leave suspend to ram. By not touching the WDT here we
are protected by the WDT all the way to the SCU.
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
CC: Anson Huang <anson.huang@nxp.com>
Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c25478419f6fd3f74c324a21ec007cf14f2688d7 ]
When an error occurs during the execution of the function
__devinit_dove_pinctrl_probe, the clk is not properly disabled.
Fix this by calling clk_disable_unprepare before return.
Fixes: ba607b6238a1 ("pinctrl: mvebu: make pdma clock on dove mandatory")
Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Link: https://lore.kernel.org/20240829064823.19808-1-wangjianzheng@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d357f25663ddfef47ffe26da21155302153d168 ]
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-2-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: c25478419f6f ("pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6e9f10e2e031fb7bfb3030a7d1afc561a28fea ]
This fix leaking the of_node references in of_dra7_atl_clk_probe().
The docs for of_parse_phandle_with_args() say that the caller must call
of_node_put() on the returned node. This adds the missing of_node_put()
to fix the leak.
Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240826-clk-fix-leak-v1-1-f55418a13aa6@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86dfdd8288907f03c18b7fb462e0e232c4f98d89 ]
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] <TASK>
[ 125.361285][ T1430] ? __warn (kernel/panic.c:693)
[ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970)
[ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151)
[ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm
[ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910)
[ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161)
[ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm
[ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma
[ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma
[ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231)
[ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393)
[ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339)
[ 125.531837][ T1430] kthread (kernel/kthread.c:389)
[ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147)
[ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
[ 125.566487][ T1430] </TASK>
[ 125.566488][ T1430] ---[ end trace 0000000000000000 ]---
Fixes: aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs")
Link: https://patch.msgid.link/r/20240820113336.19860-1-yanjun.zhu@linux.dev
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202408151633.fc01893c-oliver.sang@intel.com
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6188a1c762eb9bbd444f47696eda77a5eae6207a ]
This code accidentally uses && where || was intended. It potentially
results in a NULL dereference.
Thus, fix the if-statement expression to use the correct condition.
Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)")
Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46d7ebfe6a75a454a5fa28604f0ef1491f9d8d14 ]
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter")
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae06f360cfaca2b88b98ca89144548b3186aab1 ]
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d34b9757523c1ad547bd6d040381f62d74a3189 ]
Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically
parented by the hdmiphy clk and it is expected that the DCLK_VOP and
hdmiphy clk rate are kept in sync.
Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used
on RK3328, to make full use of all possible supported display modes.
Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP")
Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d29036853b9cb07ac49e8261fca82a940be5c41 ]
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
clk_set_parent(dram_apb_src, sys1_pll_40m);(busfreq-imx8mq.c)
commit 926bf91248dd
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3aaebcbb7c6b403416f442d1de70d437ce313a7 ]
tpm_dev_transmit prepares the TPM space before attempting command
transmission. However if the command fails no rollback of this
preparation is done. This can result in transient handles being leaked
if the device is subsequently closed with no further commands performed.
Fix this by flushing the space in the event of command transmission
failure.
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f40ec84a7976d95c34e7cc070939deb103652b0 ]
When checking a memory buffer to be consecutive in machine memory,
the alignment needs to be checked, too. Failing to do so might result
in DMA memory not being aligned according to its requested size,
leading to error messages like:
4xxx 0000:2b:00.0: enabling device (0140 -> 0142)
4xxx 0000:2b:00.0: Ring address not aligned
4xxx 0000:2b:00.0: Failed to initialise service qat_crypto
4xxx 0000:2b:00.0: Resetting device qat_dev0
4xxx: probe of 0000:2b:00.0 failed with error -14
Fixes: 9435cce87950 ("xen/swiotlb: Add support for 64KB page granularity")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94ebc3d3235c5c516f67315059ce657e5090e94b ]
cocci reported a double assignment problem. Upon reviewing previous
commits, it appears this may actually be an incorrect assignment.
Fixes: 8b9550344d39 ("drm/ipp: clean up debug messages")
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ]
The following build error was triggered because of NULL string argument:
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump':
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n",
BUILDSTDERR: | ^~
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
This happens from the commit a61ddb4393ad ("drm: enable (most) W=1
warnings by default across the subsystem"). Using "(null)" instead
to fix it.
Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status")
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/611071/
Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a30f9f65b5ac82d4390548c32ed9c7f05de7ddf5 ]
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d054c9b8457b56a651109fac21f56f46ccd46b2 ]
cur_ctx_seqno already does the same thing, but handles the edge cases
where a refcnt'd context can live after lastclose. So let's not have
two ways to do the same thing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: a30f9f65b5ac ("drm/msm/a5xx: workaround early ring-buffer emptiness check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d984457b31c4c53d2af374d5e78b3eb64debd483 ]
Rather than relying on the big dev->struct_mutex hammer, introduce a
more specific lock for protecting the bo lists.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: a30f9f65b5ac ("drm/msm/a5xx: workaround early ring-buffer emptiness check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce050f307ad93bcc5958d0dd35fc276fd394d274 ]
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64fd6d01a52904bdbda0ce810a45a428c995a4ca ]
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9dec2db76146d65e1cfbb6afb2e2bd5dab67f8 ]
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19366911340c2313a1abbb09c54eaf9bdea4f58 ]
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbaf475a5b8361ebee7da18964db809e37518b7 ]
Several cs track offsets (such as 'track->db_s_read_offset')
either are initialized with or plainly take big enough values that,
once shifted 8 bits left, may be hit with integer overflow if the
resulting values end up going over u32 limit.
Same goes for a few instances of 'surf.layer_size * mslice'
multiplications that are added to 'offset' variable - they may
potentially overflow as well and need to be validated properly.
While some debug prints in this code section take possible overflow
issues into account, simply casting to (unsigned long) may be
erroneous in its own way, as depending on CPU architecture one is
liable to get different results.
Fix said problems by:
- casting 'offset' to fixed u64 data type instead of
ambiguous unsigned long.
- casting one of the operands in vulnerable to integer
overflow cases to u64.
- adjust format specifiers in debug prints to properly
represent 'offset' values.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5d024541ec466f428e6c514577d511a40779c7b ]
EDID cannot be read on RK3328 until after read_hpd has been called and
correct io voltage has been configured based on connection status.
When a forced mode is used, e.g. video=1920x1080@60e, the connector
detect ops, that in turn normally calls the read_hpd, never gets called.
This result in reading EDID to fail in connector get_modes ops.
Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to
correct io voltage and allow reading EDID after setup_hpd.
Fixes: 1c53ba8f22a1 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-5-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef968d91a20b5da581839f093f98f7a03a804f7 ]
There is no reason to limit VOP scaling to 3840px width, the limit of
RK3288, when there are newer VOP versions that support 4096px width.
Change to enforce a maximum of 4096px width plane scaling, the maximum
supported output width of the VOP versions supported by this driver.
Fixes: 4c156c21c794 ("drm/rockchip: vop: support plane scale")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-4-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c6baff3d5f65c8da164137a58742541a060b2f ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: c324acd5032f ("drm/radeon/kms: parse the extended LCD info block")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81c5bd5cf2f428867e0bcfcccd4e4d2f8c68f51 ]
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 17c6baff3d5f ("drm/radeon: properly handle vbios fake edid sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8155566a26b8d6c1dd914f06a0c652e4e2f2adf1 ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 320e2590e281d0a7865e861f50155b5b435e9813 ]
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 8155566a26b8 ("drm/amdgpu: properly handle vbios fake edid sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 395999829880a106bb95f0ce34e6e4c2b43c6a5d ]
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa578e897520f32ae12bec487f2474357d01ca9c ]
If an error occurs after request_mem_region(), a corresponding
release_mem_region() should be called, as already done in the remove
function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ]
Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for
capacity when no rsns") made it so that capacity on systems without
current sensing would be read from VFSOC instead of RepSOC. However,
the SOC threshold calculation still read RepSOC to get the SOC
regardless of the current sensing option state.
Fix this by applying the same conditional to determine which register
should be read.
This also seems to be the intended behavior as per the datasheet - SOC
alert config value in MiscCFG on setups without current sensing is set
to a value of 0b11, indicating SOC alerts being generated based on
VFSOC, instead of 0b00 which indicates SOC alerts being generated based
on RepSOC.
This fixes an issue on the Galaxy S3/Midas boards, where the alert
interrupt would be constantly retriggered, causing high CPU usage
on idle (around ~12%-15%).
Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ]
The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable
properties of the battery, but for this driver they are writable values
and used as the minimum and maximum values for charging. Remove the
DESIGN designation from these values.
Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs")
Suggested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0fcc87c9e35191d37a8819fdab9d30e523515b ]
Allow disabling and re-enabling battery charging of an axp209 PMIC
through a writable status property. With the current driver code
charging is always on.
This works on the axp209 of Banana {Pi M1+,Pro} and should work on all
AXP chips.
Signed-off-by: Hermann.Lauer@uni-heidelberg.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: 61978807b00f ("power: supply: axp20x_battery: Remove design from min and max voltage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6964d66a07a9003868e428a956949e17ab44d7e ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Fixes: 9e8269de100d ("hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Message-ID: <20240815083021.756134-1-liuyuntao12@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 119abf7d1815f098f7f91ae7abc84324a19943d7 ]
Chips reporting overcurrent alarms report it in the second alarm register.
That means the second alarm register has to be read, even if the chip only
supports 8 or fewer ADC channels.
MAX16067 and MAX16068 report undervoltage and overvoltage alarms in
separate registers. Fold register contents together to report both with
the existing alarm attribute. This requires actually storing the chip type
in struct max16065_data. Rename the variable 'chip' to match the variable
name used in the probe function.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a71654b398e3471f0169c266a3587cf09e1200c ]
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-20-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 564d73c4d9201526bd976b9379d2aaf1a7133e84 ]
Add i2c_get_match_data() to get match data for I2C, ACPI and
DT-based matching, so that we can optimize the driver code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
[wsa: simplified var initialization]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aade55c86033bee868a93e4bf3843c9c99e84526 upstream.
Add const qualifier to the device_get_match_data() parameter.
Some of the future users may utilize this function without
forcing the type.
All the same, dev_fwnode() may be used with a const qualifier.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220922135410.49694-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 744ec4477b11c42e2c8de9eb8364675ae7a0bd81 ]
Writing large limits resulted in overflows as reported by module tests.
in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_min: Suspected overflow: [max=5538, read 0, written 2147483647]
Fix the problem by clamping prior to multiplications and the use of
DIV_ROUND_CLOSEST, and by using consistent variable types.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ]
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f58a88cc91075be38cec69b7cb70aaa4ba69e8b ]
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7781f1d120fec8624fc654eda900fc8748262082 ]
0 is incorrect error code when failed to parse and map IRQ.
Replace OF specific old API for IRQ retrieval with a generic
one to fix this issue.
Fixes: 0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814144525.2648450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f245463b01ea254ae90e1d0389e90b0e7d8dc75 ]
Zero and negative number is not a valid IRQ for in-kernel code and the
irq_of_parse_and_map() function returns zero on error. So this check for
valid IRQs should only accept values > 0.
Fixes: 44dab88e7cc9 ("spi: add spi_ppc4xx driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240724084047.1506084-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c7ac4fe22c608acf6153a3329df2b6b6cd416c ]
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f59064 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 799a9225997799f7b1b579bc50a93b78b4fb2a01 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa1a ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c471236b2359e6b27388475dd04fff0a5e2bf922 ]
Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner
IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore
we need to ensure that the inner IP header is part of the skb's linear
data.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6ae073f5903f6c6439d0ac855836a4da5c0a701 ]
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: c471236b2359 ("bareudp: Pull inner IP header on xmit.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 435fe1c0c1f74b682dba85641406abf4337aade6 ]
This patch adds support for encapsulating IPv4/IPv6 within GENEVE.
In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs
to be provided at device creation. This property cannot be changed for
the time being.
In case IP traffic is received on a non-tun device the drop count is
increased.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c471236b2359 ("bareudp: Pull inner IP header on xmit.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fa29c85117170b0508790f878b13ec6593c888 ]
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c8719b79814cab3fd43519591dcc41c978a48c ]
Even though bareudp transports L3 data (typically IP or MPLS), it needs
to reset the mac_header pointer, so that other parts of the stack don't
mistakenly access the outer header after the packet has been
decapsulated.
This allows to push an Ethernet header to bareudp packets and redirect
them to an Ethernet device:
$ tc filter add dev bareudp0 ingress matchall \
action vlan push_eth dst_mac 00:00:5e:00:53:01 \
src_mac 00:00:5e:00:53:00 \
action mirred egress redirect dev eth0
Without this patch, push_eth refuses to add an ethernet header because
the skb appears to already have a MAC header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 45fa29c85117 ("bareudp: Pull inner IP header in bareudp_udp_encap_recv().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ]
After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.
To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d836cb5fe045463cdab15ad6f278f7c7c194228f ]
Add support for implementing transceiver node as phy. The max_bitrate
is obtained by getting a phy attribute.
Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.de
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 2c09b50efcad ("can: m_can: m_can_close(): stop clocks after device has been shut down")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7c6ae1efb1ff68bc01d79d94fdf0388f86cdd8 ]
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abc00ffda43bd4ba85896713464c7510c39f8165 ]
Commit b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx
and omap36xx") introduced special handling for OMAP3 class devices
where syscon node may not be present. However, this also creates a bug
where the syscon node is present, however the offset used to read
is beyond the syscon defined range.
Fix this by providing a quirk option that is populated when such
special handling is required. This allows proper failure for all other
platforms when the syscon node and efuse offsets are mismatched.
Fixes: b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07442c46abad1d50ac82af5e0f9c5de2732c4592 ]
In tps68470_pmic_opregion_probe() pointer 'dev' is compared to NULL which
is useless.
Fix this issue by removing unneeded check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e13452ac3790 ("ACPI / PMIC: Add TI PMIC TPS68470 operation region driver")
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240730225339.13165-1-amishin@t-argos.ru
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e735a4c6137262bcefe45bb52fde7b1f5fc6c4d ]
In 'rtw_wait_firmware_completion()', always wait for both (regular and
wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()'
has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue
'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually
the wowlan one) is still in progress, causing UAF detected by KASAN.
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Reported-by: syzbot+6c6c08700f9480c41fe3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6c6c08700f9480c41fe3
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240726114657.25396-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7d47d22444bb7dc1b6d768904a22070ef35e1fc0 upstream.
Add the device id for the Macrosilicon MS3020 which is a
PL2303HXN based device.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b440396387418fe2feaacd41ca16080e7a8bc9ad upstream.
linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.
For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.
Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d795848ecce24a75dfd46481aee066ae6fe39775 upstream.
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 709df70a20e990d262c473ad9899314039e8ec82 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 258905cb9a6414be5c9ca4aa20ef855f8dc894d4 ]
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes
to their blending zorder in CU. If there's only one slave plane in
affected planes and its layer_split property is enabled, order++ for
its split layer, so that when calculating the normalized_zpos
of master planes, the split layer of the slave plane is included, but
the max_slave_zorder does not include the split layer and keep zero
because there's only one slave plane in affacted planes, although we
actually use two slave layers in this commit.
In most cases, this bug does not result in a commit failure, but assume
the following situation:
slave_layer 0: zpos = 0, layer split enabled, normalized_zpos =
0;(use slave_layer 2 as its split layer)
master_layer 0: zpos = 2, layer_split enabled, normalized_zpos =
2;(use master_layer 2 as its split layer)
master_layer 1: zpos = 4, normalized_zpos = 4;
master_layer 3: zpos = 5, normalized_zpos = 5;
kcrtc_st->max_slave_zorder = 0;
When we use master_layer 3 as a input of CU in function
komeda_compiz_set_input and check it with function
komeda_component_check_input, the parameter idx is equal to
normailzed_zpos minus max_slave_zorder, the value of idx is 5
and is euqal to CU's max_active_inputs, so that
komeda_component_check_input returns a -EINVAL value.
To fix the bug described above, when calculating the max_slave_zorder
with the layer_split enabled, count the split layer in this calculation
directly.
Signed-off-by: hongchi.peng <hongchi.peng@siengine.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826024517.3739-1-hongchi.peng@siengine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ]
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was
recently converted from just a message), that can be hit if we
wait for TX queues to become empty after firmware died. Clearly,
we can't expect anything from the firmware after it's declared dead.
Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could
be a good idea to stop the flow earlier, the flush functions do some
maintenance work that is not related to the firmware, so keep that part
of the code running even when the firmware is not running.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ]
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 752f387faaae0ae2e84d3f496922524785e77d60 ]
pinctrl-at91 currently does not support the gpio-groups devicetree
property and has no pin-range.
Because of this at91 gpios stopped working since patch
commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges")
This was discussed in the patches
commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)")
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
As a workaround manually set pin-range via gpiochip_add_pin_range() until
a) pinctrl-at91 is reworked to support devicetree gpio-groups
b) another solution as mentioned in
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
is found
Signed-off-by: Thomas Blocher <thomas.blocher@ek-dev.de>
Link: https://lore.kernel.org/5b992862-355d-f0de-cd3d-ff99e67a4ff1@ek-dev.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 233a95fd574fde1c375c486540a90304a2d2d49f upstream.
This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it
breaks codecs using non-continuous masks in source and sink ports. The
commit missed the point that port numbers are not used as indices for
iterating over prop.sink_ports or prop.source_ports.
Soundwire core and existing codecs expect that the array passed as
prop.sink_ports and prop.source_ports is continuous. The port mask still
might be non-continuous, but that's unrelated.
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/
Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps")
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a8787c1cdc7be24fdd8953ecd1a8743a1006235 upstream.
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ]
When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running
$ ping -s 11 destination
Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ]
Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.
Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ]
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20471071f198c8626dbe3951ac9834055b387844 ]
The current implementation of pmbus_show_boolean assumes that all devices
support write-back operation of status register to clear pending warnings
or faults. Since clearing individual bits in the status registers was only
introduced in PMBus specification 1.2, this operation may not be supported
by some older devices. This can result in an error while reading boolean
attributes such as temp1_max_alarm.
Fetch PMBus revision supported by the device and modify pmbus_show_boolean
so that it only tries to clear individual status bits if the device is
compliant with PMBus specs >= 1.2. Otherwise clear all fault indicators
on the current page after a fault status was reported.
Fixes: 35f165f08950a ("hwmon: (pmbus) Clear pmbus fault/warning bits after read")
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Message-ID: <20240909-pmbus-status-reg-clearing-v1-1-f1c0d68c6408@gmail.com>
[groeck:
Rewrote description
Moved revision detection code ahead of clear faults command
Assigned revision if return value from PMBUS_REVISION command is 0
Improved return value check from calling _pmbus_write_byte_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5de3e13f7f6b496bd7bd9ff4d2b915b7d3e67cda ]
Some of the pmbus core functions uses pmbus_write_byte_data, which does
not support driver callbacks for chip specific write operations. This
could potentially influence some specific regulator chips that for
example need a time delay before each data access.
Lets add support for driver callback with _pmbus_write_byte_data.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220428144039.2464667-2-marten.lindahl@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 20471071f198 ("hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c6a3a65ace70f12b27b1a27c9a69cb791dc6e91 upstream.
Avoid unnecessary nested min()/max() which results in egregious macro
expansion.
Use clamp_t() as this introduces the least possible expansion, and turn
the {s,u}DIGIT_FITTING() macros into inline functions to avoid the
nested expansion.
This resolves an issue with slackware 15.0 32-bit compilation as
reported by Richard Narron.
Presumably the min/max fixups would be difficult to backport, this patch
should be easier and fix's Richard's problem in 5.15.
Reported-by: Richard Narron <richard@aaazen.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/
Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 624ab9cde26a9f150b4fd268b0f3dae3184dc40c ]
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da897484557b34a54fabb81f6c223c19a69e546d ]
The kernel reports that the touchpad for this device can support a
different bus.
With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccbfea78adf75d3d9e87aa739dab83254f5333fa ]
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]
When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.
Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:
* 1 byte (seen on iOS 4.2.1, 8.4):
* 03: carrier off (mode 0)
* 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
* 03 03 03: carrier off (mode 0)
* 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
* 03 03 03 00: carrier off (mode 0)
* 04 03 03 00: carrier off (mode 1)
* 06 03 03 00: carrier off (mode 4)
* 04 04 03 04: carrier on (mode 0 and 1)
* 06 04 03 04: carrier on (mode 4)
Before this change, the driver always used the first byte of the
response to determine carrier state.
From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.
Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.
Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.
Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9149c9b0c7e046273141e41eebd8a517416144ac ]
This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]
When configured in HOST mode, after issuing U3/L2 exit controller fails
to send proper CRC checksum in CRC5 field. Because of this behavior
Transaction Error is generated, resulting in reset and re-enumeration of
usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations, term, and xcvr signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.
Added "snps,resume-hs-terminations" quirk to resolved the above issue.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9149c9b0c7e0 ("usb: dwc3: core: update LC timer as per USB Spec V3.2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aea62c744a9ae2a8247c54ec42138405216414da upstream.
To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT
bit. At this time, we need to check with &, not &&.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fcd9e8afd546f6ced378d078345a89bf346d065e ]
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5572a55a6f830ee3f3a994b6b962a5c327d28cb3 ]
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47ec9b417ed9b6b8ec2a941cd84d9de62adc358a ]
If acpi_processor_get_info() returned an error, pr and the associated
pr->throttling.shared_cpu_map were leaked.
The unwind code was in the wrong order wrt to setup, relying on
some unwind actions having no affect (clearing variables that were
never set etc). That makes it harder to reason about so reorder
and add appropriate labels to only undo what was actually set up
in the first place.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-6-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fadf231f0a06a6748a7fc4a2c29ac9ef7bca6bfd ]
Rafael observed [1] that returning 0 from processor_add() will result in
acpi_default_enumeration() being called which will attempt to create a
platform device, but that makes little sense when the processor is known
to be not available. So just return the error code from acpi_processor_get_info()
instead.
Link: https://lore.kernel.org/all/CAJZ5v0iKU8ra9jR+EmgxbuNm=Uwx2m1-8vn_RAZ+aCiUVLe3Pw@mail.gmail.com/ [1]
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-5-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 471ef0b5a8aaca4296108e756b970acfc499ede4 upstream.
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785295 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d5c2f8e75a55cfb11a85086c71996af0354a1fb upstream.
The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b8843fcd49827813da80c0f590a17ae4ce93c5d upstream.
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream.
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Fixes: bc63dedb7d46 ("VMCI: resource object implementation.")
Cc: stable@vger.kernel.org
Reported-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com>
Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fd28941447bf2c8ca0f26fda612a1cabc41663f upstream.
Rescind offer handling relies on rescind callbacks for some of the
resources cleanup, if they are registered. It does not unregister
vmbus device for the primary channel closure, when callback is
registered. Without it, next onoffer does not come, rescind flag
remains set and device goes to unusable state.
Add logic to unregister vmbus for the primary channel in rescind callback
to ensure channel removal and relid release, and to ensure that next
onoffer can be received and handled properly.
Cc: stable@vger.kernel.org
Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support")
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240829071312.1595-3-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb1adbd7e50f3d2de56d0a2bb0700e2e819a329e upstream.
For primary VM Bus channels, primary_channel pointer is always NULL. This
pointer is valid only for the secondary channels. Also, rescind callback
is meant for primary channels only.
Fix NULL pointer dereference by retrieving the device_obj from the parent
for the primary channel.
Cc: stable@vger.kernel.org
Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240829071312.1595-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4df153652cc46545722879415937582028c18af5 upstream.
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section.
Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn")
Cc: Todd Kjos <tkjos@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240822182353.2129600-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96f9ab0d5933c1c00142dd052f259fce0bc3ced2 upstream.
The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.
A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.
Fix by adding a 200us delay after the software reset command is issued.
Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a3dcc970dc57b358c8db2702447bf0af4e0d83a upstream.
When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO
the scale passed as argument is only applied to the fractional part of
the value. Fix it by also multiplying the integer part by the scale
provided.
Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84c65d8008764a8fb4e627ff02de01ec4245f2c4 upstream.
If dma_get_slave_caps() fails, we need to release the dma channel before
returning an error to avoid leaking the channel.
Fixes: 2d6ca60f3284 ("iio: Add a DMAengine framework based buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b48aa991758999d4e8f9296c5bbe388f293ef465 upstream.
In ad9834_write_frequency() clk_get_rate() can return 0. In such case
ad9834_calc_freqreg() call will lead to division by zero. Checking
'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0.
ad9834_write_frequency() is called from ad9834_write(), where fout is
taken from text buffer, which can contain any value.
Modify parameters checking.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 12b9d5bf76bf ("Staging: IIO: DDS: AD9833 / AD9834 driver")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20240703154506.25584-1-amishin@t-argos.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4bc0a264fb482b019c84fbc7202dd3cab059087 ]
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b739dffa5d570b411d4bdf4bb9b8dfd6b7d72305 ]
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size.
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5876b088ba03a62124266fa20d00e65533c7269 ]
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.
Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 206f533a0a7c683982af473079c4111f4a0f9f5e ]
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e9c391d45b5865b61e569146304cff72821a5d ]
report_fixup for the Cougar 500k Gaming Keyboard was not verifying
that the report descriptor size was correct before accessing it
Reported-by: syzbot+24c0361074799d02c452@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24c0361074799d02c452
Signed-off-by: Camila Alvarez <cam.alvarez.i@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 555a05d84ca2c587e2d4777006e2c2fb3dfbd91d ]
The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24
CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in
Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays
of NR_CPUS elements, and these can quickly explode in size, leading to
warnings such as:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning:
stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than]
The problem is twofold:
- Reducing the array size to the boot-time num_possible_cpus() (rather
than the compile-time NR_CPUS) creates a variable-length array,
which should be avoided in the Linux kernel.
- Using NR_CPUS as an array size makes the driver blow up in stack
consumption with generic, as opposed to hand-crafted, .config files.
A simple solution is to use dynamic allocation for num_possible_cpus()
elements (aka a small number determined at runtime).
Link: https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ]
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1de37969b7bc0abcb20b86e91e70caebbd4f89 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0403e10bf0824bf0ec2bb135d4cf1c0cc3bf4bf0 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af64e3e1537896337405f880c1e9ac1f8c0c6198 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cad724c8537fe3e0da8004646abc00290adae40 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 335e35b748527f0c06ded9eebb65387f60647fda ]
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed.
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Closes: https://lore.kernel.org/all/1981605666.2142272.1703742465927.JavaMail.zimbra@raptorengineeringinc.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Krishna Kumar <krishnak@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240701074513.94873-2-krishnak@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5e86a95541cea737394a1da967df4cd4d8f7182 ]
Queued invalidation wait descriptor status is volatile in that IOMMU
hardware writes the data upon completion.
Use READ_ONCE() to prevent compiler optimizations which ensures memory
reads every time. As a side effect, READ_ONCE() also enforces strict
types and may add an extra instruction. But it should not have negative
performance impact since we use cpu_relax anyway and the extra time(by
adding an instruction) may allow IOMMU HW request cacheline ownership
easier.
e.g. gcc 12.3
BEFORE:
81 38 ad de 00 00 cmpl $0x2,(%rax)
AFTER (with READ_ONCE())
772f: 8b 00 mov (%rax),%eax
7731: 3d ad de 00 00 cmp $0x2,%eax
//status data is 32 bit
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20240607173817.3914600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702130839.108139-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 140ce37fd78a629105377e17842465258a5459ef ]
dm_parse_device_entry() simply copies the minor number into dmi.dev, but
the dev_t format splits the minor number between the lowest 8 bytes and
highest 12 bytes. If the minor number is larger than 255, part of it
will end up getting treated as the major number
Fix this by checking that the minor number is valid and then encoding it
as a dev_t.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627b94f75b82d13d1530b59155a545fd99d807db ]
All gro_complete() handlers are called from napi_gro_complete()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc1ca3348a74a1afaa7ffebc2b2f2cc149e11278 ]
All gro_receive() handlers are called from dev_gro_receive()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bab8eb0dd4cb995caa4a0529d5655531c2ec5e8e ]
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2674e7ea22ba0e22a2d1603bd51e0b8f6442a267 ]
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Manually fix all net/usb drivers without separate maintainers.
v2: catc does DMA to the buffer, leave the conversion to Oliver
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 493c3ca6bd754d8587604496eb814f72e933075d ]
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef4a99a0164e3972abb421cbb1b09ea6c61414df ]
Call rtnl_unlock() on this error path, before returning.
Fixes: bc23aa949aeb ("igc: Add pcie error handler support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffc17e1479e8e9459b7afa80e5d9d40d0dd78abb ]
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ]
82580 NICs have a hardware bug that makes it
necessary to write into the TSICR (TimeSync Interrupt Cause) register
to clear it:
https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/
Add a conditional so only for 82580 we write into the TSICR register,
so we don't risk losing events for other models.
Without this change, when running ptp4l with an Intel 82580 card,
I get the following output:
> timed out while polling for tx timestamp increasing tx_timestamp_timeout or
> increasing kworker priority may correct this issue, but a driver bug likely
> causes it
This goes away with this change.
This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events").
Fixes: ee14cc9ea19b ("igb: Fix missing time sync events")
Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/
Tested-by: Daiwei Li <daiweili@google.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Daiwei Li <daiweili@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24a025497e7e883bd2adef5d0ece1e9b9268009f ]
Cocinnele reports a warning
WARNING: Suspicious code. resource_size is maybe missing with root
The root cause is the function resource_size is not used when needed
Use resource_size() on variable "root" of type resource
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4caf6d93d9f2c11d6441c64e1c549c445fa322ed ]
Add check for the return value of v4l2_fwnode_endpoint_parse() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ]
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf
Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siemens.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17763960b1784578e8fe915304b330922f646209 ]
When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.
If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.
Fix this by first checking if outputs are present.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d32685a251a754f1823d287df233716aa23bcb9 ]
Set the host status byte when a data completion error is encountered
otherwise the upper layer may end up using the invalid zero'ed data.
The following output was observed from scsi/sd.c prior to this fix.
[ 11.872824] sd 0:0:0:1: [sdf] tag#9 data cmplt err -75 uas-tag 1 inflight:
[ 11.872826] sd 0:0:0:1: [sdf] tag#9 CDB: Read capacity(16) 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[ 11.872830] sd 0:0:0:1: [sdf] Sector size 0 reported, assuming 512.
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/87msnx4ec6.fsf@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9ab862e05c5bc755f65bf6db7edcffb3b49dfc ]
Add a missing call to of_node_put(np) on error.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606173037.3091598-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fd7c0c2c156270dceb8c15fad3120cdce03e539 ]
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927c70c93d929f4c2dcaf72f51b31bb7d118a51a ]
The Allwinner H6 IOMMU has a bypass register, which allows to circumvent
the page tables for each possible master. The reset value for this
register is 0, which disables the bypass.
The Allwinner H616 IOMMU resets this register to 0x7f, which activates
the bypass for all masters, which is not what we want.
Always clear this register to 0, to enforce the usage of page tables,
and make this driver compatible with the H616 in this respect.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240616224056.29159-2-andre.przywara@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cef738208e5c3cb7084e208caf9bbf684f24feb ]
IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver,
generic_handle_domain_irq() is never called for these IRQs.
Disallow mapping these IRQs.
[ Marek: changed commit message ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7dd9c26bd6cf679bcfdef01a8659791aa6487a29 upstream.
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.
CPU0 CPU1
---- ----
mcp251x_open()
mutex_lock(&priv->mcp_lock)
request_threaded_irq()
<interrupt>
mcp251x_can_ist()
mutex_lock(&priv->mcp_lock)
mcp251x_hw_wake()
disable_irq() <-- deadlock
Use disable_irq_nosync() instead because the interrupt handler does
everything while holding the mutex so it doesn't matter if it's still
running.
Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required")
Signed-off-by: Simon Arlott <simon@octiron.net>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/4fc08687-1d80-43fe-9f0d-8ef8475e75f6@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ad1ed6ef27cab94888bb3c740c14042d5c0dff2 upstream.
Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate
API. The shift value is not same for different types of plls and
should be taken from the pll's .post_div_shift member.
Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream.
The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.
Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e540da4c1db7b840e347c4dfe48359b18b7e376 upstream.
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Fixes: bb7b8ec62dfb ("mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240826124851.379759-1-liaochen4@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890 upstream.
Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1]
revealed the long living issue in dw_mmc.c driver, existing since the
time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc:
Add Synopsys DesignWare mmc host driver."), also making kernel boot
broken on platforms using dw_mmc driver with 16K or 64K pages enabled,
with this message in dmesg:
mmcblk: probe of mmc0:0001 failed with error -22
That's happening because mmc_blk_probe() fails when it calls
blk_validate_limits() consequently, which returns the error due to
failed max_segment_size check in this code:
/*
* The maximum segment size has an odd historic 64k default that
* drivers probably should override. Just like the I/O size we
* require drivers to at least handle a full page per segment.
*/
...
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always
sets .max_seg_size to 4 KiB:
mmc->max_seg_size = 0x1000;
The comment in the code above explains why it's incorrect. Arnd
suggested setting .max_seg_size to .max_req_size to fix it, which is
also what some other drivers are doing:
$ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \
wc -l
18
This change is not only fixing the boot with 16K/64K pages, but also
leads to a better MMC performance. The linear write performance was
tested on E850-96 board (eMMC only), before commit [1] (where it's
possible to boot with 16K/64K pages without this fix, to be able to do
a comparison). It was tested with this command:
# dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync
Test results are as follows:
- 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s
- 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s
- 16K pages, .max_seg_size = 4 KiB: 126 MB/s
- 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s
- 64K pages, .max_seg_size = 4 KiB: 138 MB/s
- 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s
Unfortunately, SD card controller is not enabled in E850-96 yet, so it
wasn't possible for me to run the test on some cheap SD cards to check
this patch's impact on those. But it's possible that this change might
also reduce the writes count, thus improving SD/eMMC longevity.
All credit for the analysis and the suggested solution goes to Arnd.
[1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/
Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5af2c90ba5629f0424a8d315f75fb8d91713c3c upstream.
gicv2m_of_init() fails to perform an of_node_put() when
of_address_to_resource() fails, leading to a refcount leak.
Address this by moving the error handling path outside of the loop and
making it common to all failure modes.
Fixes: 4266ab1a8ff5 ("irqchip/gic-v2m: Refactor to prepare for ACPI support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240820092843.1219933-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 284b75a3d83c7631586d98f6dede1d90f128f0db upstream.
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8321fa75102246d7415a6af441872f6637c93ab upstream.
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Shivani: Modified to apply on v4.19.y-v5.10.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8931ef55bd325052ec496f242aea7f6de47dc9c ]
Struct uvc_frame and interval (u32*) are packaged together on
streaming->formats on a single contiguous allocation.
Right now they are allocated right after uvc_format, without taking into
consideration their required alignment.
This is working fine because both structures have a field with a
pointer, but it will stop working when the sizeof() of any of those
structs is not a multiple of the sizeof(void*).
Enforce that alignment during the allocation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d31653c03b90e51515b1380115d1aedad925dd ]
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c28b239620e249b68beeca17f429e317fa6b8d4 ]
This patch adds robust error handling to the meson_plane_create
function in drivers/gpu/drm/meson/meson_plane.c. The function
previously lacked proper handling for potential failure scenarios
of the drm_universal_plane_init call.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231129113405.33057-1-liuhaoran14@163.com
[narmstrong: fixe the commit subject]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129113405.33057-1-liuhaoran14@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99516f76db48e1a9d54cdfed63c1babcee4e71a5 ]
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240510201244.2968152-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b6b386f9aa936ed0c190446c71cf59d4a507690 ]
Skip submitting URBs, when identical requests were already sent in
tweak_special_requests(). Instead call the completion handler directly
to return the result of the URB.
Even though submitting those requests twice should be harmless, there
are USB devices that react poorly to some duplicated requests.
One example is the ChipIdea controller implementation in U-Boot: The
second SET_CONFIGURATION request makes U-Boot disable and re-enable all
endpoints. Re-enabling an endpoint in the ChipIdea controller, however,
was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget
reinit").
Signed-off-by: Simon Holesch <simon@holesch.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Hongren Zheng <i@zenithal.me>
Tested-by: Hongren Zheng <i@zenithal.me>
Link: https://lore.kernel.org/r/20240519141922.171460-1-simon@holesch.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eb76e71b16e8ba5277bf97617aef51f5e64dbe4 ]
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240529000259.25775-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c327d56597d8de1680cf24e956b704270d3d84a ]
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9927c2cac6e9831361e43a14d91277818154e6a ]
If IORESOURCE_BUS is not provided in Device Tree it will be fabricated in
of_pci_parse_bus_range(), so NULL pointer dereference should not happen
here.
But that's hard to verify, so check for NULL anyway.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-pci/20240503125705.46055-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37733bffda3285d18bd1d72c14b3a1cf39c56a5e ]
fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df0a9bd92fbbd3fcafcb2bce6463c9228a3e6868 ]
Check the input value for CUSTOM profile mode setting on legacy
SOCs. Otherwise we may use uninitalized value of input[]
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f624ef239bd136cdcc5bbc626157a57b938a31 ]
Currently oem_id is defined as uint8_t[6] and casted to uint64_t*
in some use case. This would lead code scanner to complain about
access beyond. Re-define it in union to enforce 8-byte size and
alignment to avoid potential issue.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d768394fa99467bcf2703bde74ddc96eeb0b71fa ]
Check the fb_channel_number range to avoid the array out-of-bounds
read error
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be1684930f5262a622d40ce7a6f1423530d87f89 ]
Check the ring type value to fix the out-of-bounds
write warning
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df4409d8a04dd39d7f2aa0c5f528a56b99eaaa13 ]
Assign an default value to agc_btc_response in failed case
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6077aa66fa230d12f37fef01161ef080d13b726 ]
[Why]
For subtraction, coverity reports integer overflow
warning message when variable type is uint32_t.
[How]
Change variable type to int32_t.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa71face755e27dc44bc296416ebdf2c67163316 ]
[WHY & HOW]
HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid
array index, and it needs checking before used.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b38a4815f79b87efb196cd5121579fc51e29a7fb ]
[WHY & HOW]
num_valid_sets needs to be checked to avoid a negative index when
accessing reader_wm_sets[num_valid_sets - 1].
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
