[ Upstream commit 4fbd66d8254cedfd1218393f39d83b6c07a01917 ]
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a).
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0bd7dacbd51c632b8e2c0500b479af564afadf3 ]
CPU hotplug remove handling triggers the following function
call sequence:
CPUHP_AP_PERF_S390_SF_ONLINE --> s390_pmu_sf_offline_cpu()
...
CPUHP_AP_PERF_ONLINE --> perf_event_exit_cpu()
The s390 CPUMF sampling CPU hotplug handler invokes:
s390_pmu_sf_offline_cpu()
+--> cpusf_pmu_setup()
+--> setup_pmc_cpu()
+--> deallocate_buffers()
This function de-allocates all sampling data buffers (SDBs) allocated
for that CPU at event initialization. It also clears the
PMU_F_RESERVED bit. The CPU is gone and can not be sampled.
With the event still being active on the removed CPU, the CPU event
hotplug support in kernel performance subsystem triggers the
following function calls on the removed CPU:
perf_event_exit_cpu()
+--> perf_event_exit_cpu_context()
+--> __perf_event_exit_context()
+--> __perf_remove_from_context()
+--> event_sched_out()
+--> cpumsf_pmu_del()
+--> cpumsf_pmu_stop()
+--> hw_perf_event_update()
to stop and remove the event. During removal of the event, the
sampling device driver tries to read out the remaining samples from
the sample data buffers (SDBs). But they have already been freed
(and may have been re-assigned). This may lead to a use after free
situation in which case the samples are most likely invalid. In the
best case the memory has not been reassigned and still contains
valid data.
Remedy this situation and check if the CPU is still in reserved
state (bit PMU_F_RESERVED set). In this case the SDBs have not been
released an contain valid data. This is always the case when
the event is removed (and no CPU hotplug off occured).
If the PMU_F_RESERVED bit is not set, the SDB buffers are gone.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ca62d90085f4af36de745883faab9f8a7cbb45d3 upstream.
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case.
Fixes: 2200aa7154cb ("arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241205121655.1824269-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f659ff362eac69777c4c191b7e5ccb19d76c67d ]
Currently, show_stack() always dumps the trace of the current task.
However, it should dump the trace of the specified task if one is
provided. Otherwise, things like running "echo t > sysrq-trigger"
won't work as expected.
Fixes: 970e51feaddb ("um: Add support for CONFIG_STACKTRACE")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241106103933.1132365-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 865e3845eeaa21e9a62abc1361644e67124f1ec0 ]
This function is expected to return a boolean value, which should be
true on success and false on failure.
Fixes: d1254b12c93e ("uml: fix x86_64 core dump crash")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240913023302.130300-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a98b7761f697e590ed5d610d87fa12be66f23419 ]
This issue happens when the real map size is greater than LONG_MAX,
which can be easily triggered on UML/i386.
Fixes: fe205bdd1321 ("um: Print minimum physical memory requirement")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 67ab51cbdfee02ef07fb9d7d14cc0bf6cb5a5e5c upstream.
Commit 18011eac28c7 ("arm64: tls: Avoid unconditional zeroing of
tpidrro_el0 for native tasks") tried to optimise the context switching
of tpidrro_el0 by eliding the clearing of the register when switching
to a native task with kpti enabled, on the erroneous assumption that
the kpti trampoline entry code would already have taken care of the
write.
Although the kpti trampoline does zero the register on entry from a
native task, the check in tls_thread_switch() is on the *next* task and
so we can end up leaving a stale, non-zero value in the register if the
previous task was 32-bit.
Drop the broken optimisation and zero tpidrro_el0 unconditionally when
switching to a native 64-bit task.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 18011eac28c7 ("arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241114095332.23391-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54bbee190d42166209185d89070c58a343bf514b upstream.
DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates
to true if any counter's global enable (PMCR_EL0.E), overflow flag
(PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1.
Of note, this does not require a counter to be enabled
(i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow.
Align kvm_pmu_overflow_status() with the reality of the architecture
and stop using PMCNTENSET_EL0 as part of the overflow condition. The
bug was discovered while running an SBSA PMU test [*], which only sets
PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt.
Cc: stable@vger.kernel.org
Fixes: 76d883c4e640 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register")
Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[ oliver: massaged changelog ]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b2f2d22fb424e9bebda4dbf6676cbfc7f9f62cd upstream.
Fix the AEGIS assembly code to access 'unsigned int' arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b590160d2cf776b304eb054afafea2bd55e3620 upstream.
If the trace data buffer becomes full, a truncated flag [T] is reported
in PERF_RECORD_AUX. In some cases, the size reported is 0, even though
data must have been added to make the buffer full.
That happens when the buffer fills up from empty to full before the
Intel PT driver has updated the buffer position. Then the driver
calculates the new buffer position before calculating the data size.
If the old and new positions are the same, the data size is reported
as 0, even though it is really the whole buffer size.
Fix by detecting when the buffer position is wrapped, and adjust the
data size calculation accordingly.
Example
Use a very small buffer size (8K) and observe the size of truncated [T]
data. Before the fix, it is possible to see records of 0 size.
Before:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
5 19462712368111 0x19710 [0x40]: PERF_RECORD_AUX offset: 0 size: 0 flags: 0x1 [T]
5 19462712700046 0x19ba8 [0x40]: PERF_RECORD_AUX offset: 0x170 size: 0xe90 flags: 0x1 [T]
After:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.040 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
1 113720802995 0x4948 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x2000 flags: 0x1 [T]
1 113720979812 0x6b10 [0x40]: PERF_RECORD_AUX offset: 0x2000 size: 0x2000 flags: 0x1 [T]
Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241022155920.17511-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63a24cf8cc330e5a68ebd2e20ae200096974c475 ]
When CONFIG_FEC is set (due to COMPILE_TEST) along with
CONFIG_M54xx, coldfire/device.c has compile errors due to
missing MCFEC_* and MCF_IRQ_FEC_* symbols.
Make the whole FEC blocks dependent on having the HW macros
defined, rather than on CONFIG_FEC itself.
This fix is very similar to commit e6e1e7b19fa1 ("m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined")
Fixes: b7ce7f0d0efc ("m68knommu: merge common ColdFire FEC platform setup code")
To: Greg Ungerer <gerg@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f212140962c93cd5da43283a18e31681540fc23d ]
Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO
register offset was incorrectly set to 8 instead of 0. This prevented
proper GPIO configuration for m5441x targets.
Fixes: bea8bcb12da0 ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83b5a407fbb73e6965adfb4bd0a803724bf87f96 ]
of_property_read_u64() can fail and leave the variable uninitialized,
which will then be used. Return error if reading the property failed.
Fixes: 2e6bd221d96f ("powerpc/kexec_file: Enable early kernel OPAL calls")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930075628.125138-1-zhangzekun11@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26c4dbb3d9c1821cb0fc11cb2dbc32d5bf3463b ]
These functions are not used outside of sstep.c
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241001130356.14664-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0161bd38c24312853ed5ae9a425a1c41c4ac674a ]
On powerpc64 as shown below by readelf, vDSO functions symbols have
type NOTYPE.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
Link: 5f2dd691b6
Fixes: ba83b3239e65 ("selftests: vDSO: fix vDSO symbols lookup for powerpc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd36ad71ad65968f97630808bc8d605c929b128e ]
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of
50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot
be set, when the existing regulator value is beyond this range.
This will lead to the whole regulator driver to give up and fail
probing, which in turn will hang the system, as essential devices depend
on the PMIC.
In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4),
and the AXP driver's attempt to correct this lead to this error:
==================
[ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV
[ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL
[ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5
[ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22
==================
Set the limits to values that can be programmed, so any correction will
be successful.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1e1dea72651b ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators")
Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f4574dd6dd19eb3e8ab0415a3ae960d04be3a65 ]
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 0309f714a090 ("clocksource/drivers:sp804: Make user selectable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0708967e2d56e370231fd07defa0d69f9ad125e8 ]
Building the kernel with ARCH=s390 creates a weird arch/arch/ directory.
$ find arch/arch
arch/arch
arch/arch/s390
arch/arch/s390/include
arch/arch/s390/include/generated
arch/arch/s390/include/generated/asm
arch/arch/s390/include/generated/uapi
arch/arch/s390/include/generated/uapi/asm
The root cause is 'targets' in arch/s390/kernel/syscalls/Makefile,
where the relative path is incorrect.
Strictly speaking, 'targets' was not necessary in the first place
because this Makefile uses 'filechk' instead of 'if_changed'.
However, this commit keeps it, as it will be useful when converting
'filechk' to 'if_changed' later.
Fixes: 5c75824d915e ("s390/syscalls: add Makefile to generate system call header files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 340fd66c856651d8c1d29f392dd26ad674d2db0e ]
Commit be2881824ae9 ("arm64/build: Assert for unwanted sections")
introduced an assertion to ensure that the .data.rel.ro section does
not exist.
However, this check does not work when CONFIG_LTO_CLANG is enabled,
because .data.rel.ro matches the .data.[0-9a-zA-Z_]* pattern in the
DATA_MAIN macro.
Move the ASSERT() above the RW_DATA() line.
Fixes: be2881824ae9 ("arm64/build: Assert for unwanted sections")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241106161843.189927-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 077b33b9e2833ff25050d986178a2c4c4036cbac ]
Commit a38eaa07a0ce ("m68k/mvme147: config.c - Remove unused
functions"), removed the console functionality for the mvme147 instead
of wiring it up to an early console. Put the console write function
back and wire it up like mvme16x does so it's possible to see Linux boot
on this fine hardware once more.
Fixes: a38eaa07a0ce ("m68k/mvme147: config.c - Remove unused functions")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/a82e8f0068a8722996a0ccfe666abb5e0a5c120d.1730850684.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcec33c1fc4ab63983d93ffb0d82b68fc5775b88 ]
When building with W=1:
arch/m68k/mvme16x/config.c:208:6: warning: no previous prototype for ‘mvme16x_cons_write’ [-Wmissing-prototypes]
208 | void mvme16x_cons_write(struct console *co, const char *str, unsigned count)
| ^~~~~~~~~~~~~~~~~~
Fix this by introducing a new header file "mvme16x.h" for holding the
prototypes of functions implemented in arch/m68k/mvme16x/.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/6200cc3b26fad215c4524748af04692e38c5ecd2.1694613528.git.geert@linux-m68k.org
Stable-dep-of: 077b33b9e283 ("m68k: mvme147: Reinstate early console")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47bc874427382018fa2e3e982480e156271eee70 ]
Sometime long ago the m68k IRQ code was refactored and the interrupt
numbers for SCSI controller on this board ended up wrong, and it hasn't
worked since.
The PCC adds 0x40 to the vector for its interrupts so they end up in
the user interrupt range. Hence, the kernel number should be the kernel
offset for user interrupt range + the PCC interrupt number.
Fixes: 200a3d352cd5 ("[PATCH] m68k: convert VME irq code")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/0e7636a21a0274eea35bfd5d874459d5078e97cc.1727926187.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da09935975c8f8c90d6f57be2422dee5557206cd ]
When MIPS_FP_SUPPORT is disabled, __sanitize_fcr31() is defined as
nothing, which triggers a gcc warning:
In file included from kernel/sched/core.c:79:
kernel/sched/core.c: In function 'context_switch':
./arch/mips/include/asm/switch_to.h:114:39: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
114 | __sanitize_fcr31(next); \
| ^
kernel/sched/core.c:5316:9: note: in expansion of macro 'switch_to'
5316 | switch_to(prev, next, prev);
| ^~~~~~~~~
Fix this by providing an empty body for __sanitize_fcr31() like one is
defined for __mips_mt_fpaff_switch_to().
Fixes: 36a498035bd2 ("MIPS: Avoid FCSR sanitization when CONFIG_MIPS_FP_SUPPORT=n")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04c3024560d3a14acd18d0a51a1d0a89d29b7eb5 upstream.
AMD does not have the requirement for a synchronization barrier when
acccessing a certain group of MSRs. Do not incur that unnecessary
penalty there.
There will be a CPUID bit which explicitly states that a MFENCE is not
needed. Once that bit is added to the APM, this will be extended with
it.
While at it, move to processor.h to avoid include hell. Untangling that
file properly is a matter for another day.
Some notes on the performance aspect of why this is relevant, courtesy
of Kishon VijayAbraham <Kishon.VijayAbraham@amd.com>:
On a AMD Zen4 system with 96 cores, a modified ipi-bench[1] on a VM
shows x2AVIC IPI rate is 3% to 4% lower than AVIC IPI rate. The
ipi-bench is modified so that the IPIs are sent between two vCPUs in the
same CCX. This also requires to pin the vCPU to a physical core to
prevent any latencies. This simulates the use case of pinning vCPUs to
the thread of a single CCX to avoid interrupt IPI latency.
In order to avoid run-to-run variance (for both x2AVIC and AVIC), the
below configurations are done:
1) Disable Power States in BIOS (to prevent the system from going to
lower power state)
2) Run the system at fixed frequency 2500MHz (to prevent the system
from increasing the frequency when the load is more)
With the above configuration:
*) Performance measured using ipi-bench for AVIC:
Average Latency: 1124.98ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.6759M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1172.42ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 40.9432M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
From above, x2AVIC latency is ~4% more than AVIC. However, the expectation is
x2AVIC performance to be better or equivalent to AVIC. Upon analyzing
the perf captures, it is observed significant time is spent in
weak_wrmsr_fence() invoked by x2apic_send_IPI().
With the fix to skip weak_wrmsr_fence()
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1117.44ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.9608M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
Comparing the performance of x2AVIC with and without the fix, it can be seen
the performance improves by ~4%.
Performance captured using an unmodified ipi-bench using the 'mesh-ipi' option
with and without weak_wrmsr_fence() on a Zen4 system also showed significant
performance improvement without weak_wrmsr_fence(). The 'mesh-ipi' option ignores
CCX or CCD and just picks random vCPU.
Average throughput (10 iterations) with weak_wrmsr_fence(),
Cumulative throughput: 4933374 IPI/s
Average throughput (10 iterations) without weak_wrmsr_fence(),
Cumulative throughput: 6355156 IPI/s
[1] https://github.com/bytedance/kvm-utils/tree/master/microbenchmark/ipi-bench
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230622095212.20940-1-bp@alien8.de
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fce9642c765a18abd1db0339a7d832c29b68456a ]
node_to_amd_nb() is defined to NULL in non-AMD configs:
drivers/platform/x86/amd/hsmp/plat.c: In function 'init_platform_device':
drivers/platform/x86/amd/hsmp/plat.c:165:68: error: dereferencing 'void *' pointer [-Werror]
165 | sock->root = node_to_amd_nb(i)->root;
| ^~
drivers/platform/x86/amd/hsmp/plat.c:165:68: error: request for member 'root' in something not a structure or union
Users of the interface who also allow COMPILE_TEST will cause the above build
error so provide an inline stub to fix that.
[ bp: Massage commit message. ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241029092329.3857004-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5baf8b037debf4ec60108ccfeccb8636d1dbad81 ]
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa0d42cacf093a6fcca872edc954f6f812926a17 upstream.
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc.
Fixes: f99e3daf94ff ("KVM: x86: Add Intel PT virtualization work mode")
Cc: stable@vger.kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101185031.1799556-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d9ffb2fe65a6c4ef114e8d4f947958a12751bbe upstream.
The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled.
Debugging traced the issue back to
b69a2afd5afc ("x86/kexec: Carry forward IMA measurement log on kexec").
Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC
enabled, which led to the oversight, with the following incarnation:
...
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656'
ima: Allocated hash algorithm: sha256
Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ #14
Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023
RIP: 0010:ima_restore_measurement_list
Call Trace:
<TASK>
? show_trace_log_lvl
? show_trace_log_lvl
? ima_load_kexec_buffer
? __die_body.cold
? die_addr
? exc_general_protection
? asm_exc_general_protection
? ima_restore_measurement_list
? vprintk_emit
? ima_load_kexec_buffer
ima_load_kexec_buffer
ima_init
? __pfx_init_ima
init_ima
? __pfx_init_ima
do_one_initcall
do_initcalls
? __pfx_kernel_init
kernel_init_freeable
kernel_init
ret_from_fork
? __pfx_kernel_init
ret_from_fork_asm
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
Rebooting in 10 seconds..
Adding debug printks showed that the stored addr and size of ima_kexec buffer
are not decrypted correctly like:
ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359
Three types of setup_data info
— SETUP_EFI,
- SETUP_IMA, and
- SETUP_RNG_SEED
are passed to the kexec/kdump kernel. Only the ima_kexec buffer
experienced incorrect decryption. Debugging identified a bug in
early_memremap_is_setup_data(), where an incorrect range calculation
occurred due to the len variable in struct setup_data ended up only
representing the length of the data field, excluding the struct's size,
and thus leading to miscalculation.
Address a similar issue in memremap_is_setup_data() while at it.
[ bp: Heavily massage. ]
Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240911081615.262202-3-bhe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cf8989d20d64ad702a6210c11a0347ebf3852aa7 ]
In opal_event_init() if request_irq() fails name is not freed, leading
to a memory leak. The code only runs at boot time, there's no way for a
user to trigger it, so there's no security impact.
Fix the leak by freeing name in the error path.
Reported-by: 2639161967 <2639161967@qq.com>
Closes: https://lore.kernel.org/linuxppc-dev/87wmjp3wig.fsf@mail.lhotse
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240920093520.67997-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77a9a7f2d3b94d29d13d71b851114d593a2147cf ]
Both the node name as well as the compatible were not named
according to the binding expectations, fix that.
Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bade1ad1f0821aef31f6a8fb1027ae292566d85 ]
Compatible and clock names did not match the existing binding.
So set the correct values and re-order+rename the clocks.
It looks like no rk3036 board did use the spi controller so far,
so this was never detected on a running device yet.
Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1580ccb6ed9dc76b8ff3e2d8912e8215c8b0fa6d ]
Neither the binding nor the driver implementation specify/use the grf
reference provided in the rk3036. And neither does the newer rk3128
user of the hdmi controller. So drop the rockchip,grf property.
Fixes: b7217cf19c63 ("ARM: dts: rockchip: add hdmi device node for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7206853cd7d31c52575fb1dc7616b4398f3bc8f ]
The acodec node is not conformant to the binding.
Set the correct nodename, use the correct compatible, add the needed
#sound-dai-cells and sort the rockchip,grf below clocks properties
as expected.
Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stack mapping entropy is currently hard-wired to 11 bits of entropy on
32-bit and 18 bits of entropy on 64-bit. The stack itself gains an extra
8 bits of entropy from lower bit randomization within 16 byte alignment
constraints. The argument block could have all lower bits randomized but
it currently only gets the mapping randomization.
Rather than hard-wiring values this switches to using the mmap entropy
configuration like the mmap base and executable base, resulting in a
range of 8 to 16 bits on 32-bit and 18 to 24 bits on 64-bit (with 4k
pages and 3 level page tables) depending on kernel configuration and
overridable via the sysctl entries.
It's worth noting that since these kernel configuration options default
to the minimum supported entropy value, the entropy on 32-bit will drop
from 11 to 8 bits for builds using the defaults. However, following the
configuration seems like the right thing to do regardless. At the very
least, changing the defaults for COMPAT (32-bit processes on 64-bit)
should be considered due to the larger address space compared to real
32-bit.
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: anupritaisno1 <www.anuprita804@gmail.com>
