[ Upstream commit 0f3819e8c483771a59cf9d3190cd68a7a990083c ]
According to the C standard 3.4.3p3, the result of signed integer overflow
is undefined. The macro nilfs_cnt32_ge(), which compares two sequence
numbers, uses signed integer subtraction that can overflow, and therefore
the result of the calculation may differ from what is expected due to
undefined behavior in different environments.
Similar to an earlier change to the jiffies-related comparison macros in
commit 5a581b367b5d ("jiffies: Avoid undefined behavior from signed
overflow"), avoid this potential issue by changing the definition of the
macro to perform the subtraction as unsigned integers, then cast the
result to a signed integer for comparison.
Link: https://lkml.kernel.org/r/20130727225828.GA11864@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/20240702183512.6390-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7920b3e9d9f5470d5ff7d883e72a47addc0a137 ]
There some macros are unused and cause gcc warning. Remove them.
fs/nilfs2/segment.c:137:0: warning: macro "nilfs_cnt32_gt" is not used [-Wunused-macros]
fs/nilfs2/segment.c:144:0: warning: macro "nilfs_cnt32_le" is not used [-Wunused-macros]
fs/nilfs2/segment.c:143:0: warning: macro "nilfs_cnt32_lt" is not used [-Wunused-macros]
Link: https://lkml.kernel.org/r/1607552733-24292-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 0f3819e8c483 ("nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9f022e975d930709848a86a1c79775b0585202 ]
Patch series "fs/proc: move page_mapcount() to fs/proc/internal.h".
With all other page_mapcount() users in the tree gone, move
page_mapcount() to fs/proc/internal.h, rename it and extend the
documentation to prevent future (ab)use.
... of course, I find some issues while working on that code that I sort
first ;)
We'll now only end up calling page_mapcount() [now
folio_precise_page_mapcount()] on pages mapped via present page table
entries. Except for /proc/kpagecount, that still does questionable
things, but we'll leave that legacy interface as is for now.
Did a quick sanity check. Likely we would want some better selfestest for
/proc/$/pagemap + smaps. I'll see if I can find some time to write some
more.
This patch (of 6):
Looks like we never taught pagemap_pmd_range() about the existence of
PMD-mapped file THPs. Seems to date back to the times when we first added
support for non-anon THPs in the form of shmem THP.
Link: https://lkml.kernel.org/r/20240607122357.115423-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240607122357.115423-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes: 800d8c63b2e9 ("shmem: add huge pages support")
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65121eff3e4c8c90f8126debf3c369228691c591 ]
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907c3fe532253a6ef4eb9c4d67efb71fab58c706 ]
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to prevent redundant entry creation by racing against itself,
mb_cache_entry_create scans through a large hash-list of all current
entries in order to see if another allocation for the requested new
entry has been made. Furthermore, it allocates memory for a new entry
before scanning through this hash-list, which results in that allocated
memory being discarded when the requested new entry is already present.
This happens more than half the time.
Speed up cache entry creation by keeping a small linked list of
requested new entries in progress, and scanning through that first
instead of the large hash-list. Additionally, don't bother allocating
memory for a new entry until it's known that the allocated memory will
be used.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
In OPPO's kernel:
enlarge min_fsync_blocks to optimize performance
- yanwu@TECH.Storage.FS.oF2FS, 2019/08/12
Huawei is also doing this in their production kernel.
If this optimization is good for them and shipped
with their devices, it should be good for us.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Adithya R <gh0strider.2k18.reborn@gmail.com>
GC should run conservatively as possible to reduce latency spikes to the user.
Setting ioprio to idle class will allow the kernel to schedule GC thread's I/O
to not affect any other processes' I/O requests.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
On high fs utilization, congestion is hit quite frequently and waiting for a
whooping 20ms is too expensive, especially on critical paths.
Reduce it to an amount that is unlikely to affect UI rendering paths.
The new times are as follows:
100 Hz => 1 jiffy (effective: 10 ms)
250 Hz => 2 jiffies (effective: 8 ms)
300 Hz => 2 jiffies (effective: 6 ms)
1000 Hz => 6 jiffies (effective: 6 ms)
Co-authored-by: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
iter_file_splice_write() may spawn bvec segments with zero-length. In
preparation for prohibiting them, filter out by hand at splice level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 0f1d344feb534555a0dcd0beafb7211a37c5355e)
(cherry picked from commit 4c72fdc13bd20d10f59b8145627312814583a945)
(cherry picked from commit cba6a18da1cc8144a07ba6a4b03e8e8dc8d24428)
(cherry picked from commit 54a17499483118cd3c92feb747c88207ce30e9ce)
(cherry picked from commit 4dec661d05c16a8e62dd833262ff68ce3e466770)
(cherry picked from commit fe99d86b681099f662b2b01155b02b8476ff428d)
(cherry picked from commit aa033460cd26157fe81e829e4744b3396a09860b)
commit f8138f2ad2f745b9a1c696a05b749eabe44337ea upstream.
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0fa70aca54c8643248e89061da23752506ec0d4 upstream.
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 255547c6bb8940a97eea94ef9d464ea5967763fb upstream.
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
Link: https://lkml.kernel.org/r/20240626104433.163270-1-llfamsec@gmail.com
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 124e7c61deb27d758df5ec0521c36cf08d417f7a upstream.
ext4_abort will eventually call ext4_errno_to_code, which translates the
errno to an EXT4_ERR specific error. This means that ext4_abort expects
an errno. By using EXT4_ERR_ here, it gets misinterpreted (as an errno),
and ends up saving EXT4_ERR_EBUSY on the superblock during an abort,
which makes no sense.
ESHUTDOWN will get properly translated to EXT4_ERR_SHUTDOWN, so use that
instead.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20211026173302.84000-1-krisman@collabora.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 391b59b045004d5b985d033263ccba3e941a7740 ]
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e4c6a3031c74078dba7fa36239d0f4fe476c53 ]
If during the quota disable we fail when cleaning the quota tree or when
deleting the root from the root tree, we jump to the 'out' label without
ever dropping the reference on the quota root, resulting in a leak of the
root since fs_info->quota_root is no longer pointing to the root (we have
set it to NULL just before those steps).
Fix this by always doing a btrfs_put_root() call under the 'out' label.
This is a problem that exists since qgroups were first added in 2012 by
commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but
back then we missed a kfree on the quota root and free_extent_buffer()
calls on its root and commit root nodes, since back then roots were not
yet reference counted.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed8c7fbdfe117abbef81f65428ba263118ef298a ]
The maximum possible return value of find_next_zero_bit(fdt->full_fds_bits,
maxbit, bitbit) is maxbit. This return value, multiplied by BITS_PER_LONG,
gives the value of bitbit, which can never be greater than maxfd, it can
only be equal to maxfd at most, so the following check 'if (bitbit > maxfd)'
will never be true.
Moreover, when bitbit equals maxfd, it indicates that there are no unused
fds, and the function can directly return.
Fix this check.
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://lore.kernel.org/r/20240529160656.209352-1-yuntao.wang@linux.dev
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3cad1bc010416c6dd780643476bc59ed742436b9 upstream.
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
[stable fixup: ->c.flc_type was ->fl_type in older kernels]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e1ddc09ca55746079cc479aa3eb6411f0d99d4 upstream.
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot().
Link: https://lkml.kernel.org/r/20240628165107.9006-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d3abed1ad3d367fa2627@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d3abed1ad3d367fa2627
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aabfe57ebaa75841db47ea59091ec3c5a06d2f52 ]
The nr_dentry_negative counter is intended to only account negative
dentries that are present on the superblock LRU. Therefore, the LRU
add, remove and isolate helpers modify the counter based on whether
the dentry is negative, but the shrinker list related helpers do not
modify the counter, and the paths that change a dentry between
positive and negative only do so if DCACHE_LRU_LIST is set.
The problem with this is that a dentry on a shrinker list still has
DCACHE_LRU_LIST set to indicate ->d_lru is in use. The additional
DCACHE_SHRINK_LIST flag denotes whether the dentry is on LRU or a
shrink related list. Therefore if a relevant operation (i.e. unlink)
occurs while a dentry is present on a shrinker list, and the
associated codepath only checks for DCACHE_LRU_LIST, then it is
technically possible to modify the negative dentry count for a
dentry that is off the LRU. Since the shrinker list related helpers
do not modify the negative dentry count (because non-LRU dentries
should not be included in the count) when the dentry is ultimately
removed from the shrinker list, this can cause the negative dentry
count to become permanently inaccurate.
This problem can be reproduced via a heavy file create/unlink vs.
drop_caches workload. On an 80xcpu system, I start 80 tasks each
running a 1k file create/delete loop, and one task spinning on
drop_caches. After 10 minutes or so of runtime, the idle/clean cache
negative dentry count increases from somewhere in the range of 5-10
entries to several hundred (and increasingly grows beyond
nr_dentry_unused).
Tweak the logic in the paths that turn a dentry negative or positive
to filter out the case where the dentry is present on a shrink
related list. This allows the above workload to maintain an accurate
negative dentry count.
Fixes: af0c9af1b3f6 ("fs/dcache: Track & report number of negative dentries")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20240703121301.247680-1-bfoster@redhat.com
Acked-by: Ian Kent <ikent@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bfb40be31ddea0cb4664b352e1797cfe6c91976 ]
Currently, the __d_clear_type_and_inode() writes the value flags to
dentry->d_flags, then immediately re-reads it in order to use it in a if
statement. This re-read is useless because no other update to
dentry->d_flags can occur at this point.
This commit therefore re-use flags in the if statement instead of
re-reading dentry->d_flags.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_5E187BD0A61BA28605E85405F15228254D0A@qq.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: aabfe57ebaa7 ("vfs: don't mod negative dentry count when on shrinker list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b3ec4f7c03d4b07bad70697d7e2f4088d2cfe92 ]
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen.
Fixes: 74f6f5912693 ("locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock")
Link: https://lore.kernel.org/linux-fsdevel/724ffb0a2962e912ea62bb0515deadf39c325112.camel@kernel.org/
Reported-by: Light Hsieh (謝明燈) <Light.Hsieh@mediatek.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240702-filelock-6-10-v1-1-96e766aadc98@kernel.org
Reviewed-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 93aef9eda1cea9e84ab2453fcceb8addad0e46f1 upstream.
If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.
Previous fix commit d325dc6eb763 ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.
If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.
Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.
Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb76c6c274683c8570ad788f79d4b875bde0e458 upstream.
Syzbot reported that mounting and unmounting a specific pattern of
corrupted nilfs2 filesystem images causes a use-after-free of metadata
file inodes, which triggers a kernel bug in lru_add_fn().
As Jan Kara pointed out, this is because the link count of a metadata file
gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(),
tries to delete that inode (ifile inode in this case).
The inconsistency occurs because directories containing the inode numbers
of these metadata files that should not be visible in the namespace are
read without checking.
Fix this issue by treating the inode numbers of these internal files as
errors in the sanity check helper when reading directory folios/pages.
Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer
analysis.
Link: https://lkml.kernel.org/r/20240623051135.4180-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d79afb004be235636ee8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d79afb004be235636ee8
Reported-by: Jan Kara <jack@suse.cz>
Closes: https://lkml.kernel.org/r/20240617075758.wewhukbrjod5fp5o@quack3
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fec219a36e0993642844be0f345513507031f4 upstream.
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.
Link: https://lkml.kernel.org/r/20240623051135.4180-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240623051135.4180-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af9a8730ddb6a4b2edd779ccc0aceb994d616830 ]
During the stress testing of the jffs2 file system,the following
abnormal printouts were found:
[ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948
[ 2430.649622] Mem abort info:
[ 2430.649829] ESR = 0x96000004
[ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2430.650564] SET = 0, FnV = 0
[ 2430.650795] EA = 0, S1PTW = 0
[ 2430.651032] FSC = 0x04: level 0 translation fault
[ 2430.651446] Data abort info:
[ 2430.651683] ISV = 0, ISS = 0x00000004
[ 2430.652001] CM = 0, WnR = 0
[ 2430.652558] [0069696969696948] address between user and kernel address ranges
[ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33
[ 2430.655008] Hardware name: linux,dummy-virt (DT)
[ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2430.656142] pc : kfree+0x78/0x348
[ 2430.656630] lr : jffs2_free_inode+0x24/0x48
[ 2430.657051] sp : ffff800009eebd10
[ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000
[ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000
[ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14
[ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000
[ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000
[ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19
[ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14
[ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302
[ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342
[ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000
[ 2430.664217] Call trace:
[ 2430.664528] kfree+0x78/0x348
[ 2430.664855] jffs2_free_inode+0x24/0x48
[ 2430.665233] i_callback+0x24/0x50
[ 2430.665528] rcu_do_batch+0x1ac/0x448
[ 2430.665892] rcu_core+0x28c/0x3c8
[ 2430.666151] rcu_core_si+0x18/0x28
[ 2430.666473] __do_softirq+0x138/0x3cc
[ 2430.666781] irq_exit+0xf0/0x110
[ 2430.667065] handle_domain_irq+0x6c/0x98
[ 2430.667447] gic_handle_irq+0xac/0xe8
[ 2430.667739] call_on_irq_stack+0x28/0x54
The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of
the jffs_inode_info structure. It was found that all variables in the jffs_inode_info
structure were 5a5a5a5a, except for the first member sem. It is suspected that these
variables are not initialized because they were set to 5a5a5a5a during memory testing,
which is meant to detect uninitialized memory.The sem variable is initialized in the
function jffs2_i_init_once, while other members are initialized in
the function jffs2_init_inode_info.
The function jffs2_init_inode_info is called after iget_locked,
but in the iget_locked function, the destroy_inode process is triggered,
which releases the inode and consequently, the target member of the inode
is not initialized.In concurrent high pressure scenarios, iget_locked
may enter the destroy_inode branch as described in the code.
Since the destroy_inode functionality of jffs2 only releases the target,
the fix method is to set target to NULL in jffs2_i_init_once.
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn>
Reviewed-by: Yang Tao <yang.tao172@zte.com.cn>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53e4efa470d5fc6a96662d2d3322cfc925818517 ]
Arnd Bergmann sent a patch to fsdevel, he says:
"orangefs_statfs() copies two consecutive fields of the superblock into
the statfs structure, which triggers a warning from the string fortification
helpers"
Jan Kara suggested an alternate way to do the patch to make it more readable.
I ran both ideas through xfstests and both seem fine. This patch
is based on Jan Kara's suggestion.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0b768a9610c6de9811c6d33900bebfb665192ee1 upstream.
The pagecache handles readpage failing by itself; it doesn't want
filesystems to remove pages from under it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b8e88e563b5f666446d002ad0dc1e6e8e7102b0 upstream.
The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.
Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.
The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake.
Fixes: 3f6d078d4acc ("fix compat truncate/ftruncate")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be346c1a6eeb49d8fda827d2a9522124c2f72f36 upstream.
The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits(). This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.
Extent tree manipulations do often extend the current transaction but not
in all of the cases. For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents. Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error. This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.
To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().
Heming Zhao said:
------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"
PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA"
#0 machine_kexec at ffffffff8c069932
#1 __crash_kexec at ffffffff8c1338fa
#2 panic at ffffffff8c1d69b9
#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
#11 dio_complete at ffffffff8c2b9fa7
#12 do_blockdev_direct_IO at ffffffff8c2bc09f
#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
#14 generic_file_direct_write at ffffffff8c1dcf14
#15 __generic_file_write_iter at ffffffff8c1dd07b
#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
#17 aio_write at ffffffff8c2cc72e
#18 kmem_cache_alloc at ffffffff8c248dde
#19 do_io_submit at ffffffff8c2ccada
#20 do_syscall_64 at ffffffff8c004984
#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba
Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz
Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 10396f4df8b75ff6ab0aa2cd74296565466f2c8d ]
Currently the CB_RECALL_ANY job takes a cl_rpc_users reference to the
client. While a callback job is technically an RPC that counter is
really more for client-driven RPCs, and this has the effect of
preventing the client from being unhashed until the callback completes.
If nfsd decides to send a CB_RECALL_ANY just as the client reboots, we
can end up in a situation where the callback can't complete on the (now
dead) callback channel, but the new client can't connect because the old
client can't be unhashed. This usually manifests as a NFS4ERR_DELAY
return on the CREATE_SESSION operation.
The job is only holding a reference to the client so it can clear a flag
after the RPC completes. Fix this by having CB_RECALL_ANY instead hold a
reference to the cl_nfsdfs.cl_ref. Typically we only take that sort of
reference when dealing with the nfsdfs info files, but it should work
appropriately here to ensure that the nfs4_client doesn't disappear.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e695a9ad0305af6e8b0cbc24a54976ac2120cbb3 ]
When we lookup an smb session based on session id,
we did not up the ref-count for the session. This can
potentially cause issues if the session is freed from under us.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 02c418774f76 ("smb: client: fix deadlock in smb2_find_smb_tcon()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac5eecf481c29942eb9a862e758c0c8b68090c33 ]
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4ca369ca221bb7e06c725792ac107f0e48e82e7 upstream.
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
...
Call Trace:
<TASK>
nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
kthread+0x2f0/0x390
ret_from_fork+0x4b/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device's page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.
Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.
Link: https://lkml.kernel.org/r/20240530141556.4411-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 952b023f06a24b2ad6ba67304c4c84d45bea2f18 upstream.
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4.
Link: https://lkml.kernel.org/r/20240408082041.20925-3-glass.su@suse.com
Fixes: b25801038da5 ("ocfs2: Support xfs style space reservation ioctls")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8cb324277ee16f3eca3055b96fce4735a5a41c6 upstream.
The default atime related mount option is '-o realtime' which means file
atime should be updated if atime <= ctime or atime <= mtime. atime should
be updated in the following scenario, but it is not:
==========================================================
$ rm /mnt/testfile;
$ echo test > /mnt/testfile
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
$ sleep 5
$ cat /mnt/testfile > /dev/null
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
==========================================================
And the reason the atime in the test is not updated is that ocfs2 calls
ktime_get_real_ts64() in __ocfs2_mknod_locked during file creation. Then
inode_set_ctime_current() is called in inode_set_ctime_current() calls
ktime_get_coarse_real_ts64() to get current time.
ktime_get_real_ts64() is more accurate than ktime_get_coarse_real_ts64().
In my test box, I saw ctime set by ktime_get_coarse_real_ts64() is less
than ktime_get_real_ts64() even ctime is set later. The ctime of the new
inode is smaller than atime.
The call trace is like:
ocfs2_create
ocfs2_mknod
__ocfs2_mknod_locked
....
ktime_get_real_ts64 <------- set atime,ctime,mtime, more accurate
ocfs2_populate_inode
...
ocfs2_init_acl
ocfs2_acl_set_mode
inode_set_ctime_current
current_time
ktime_get_coarse_real_ts64 <-------less accurate
ocfs2_file_read_iter
ocfs2_inode_lock_atime
ocfs2_should_update_atime
atime <= ctime ? <-------- false, ctime < atime due to accuracy
So here call ktime_get_coarse_real_ts64 to set inode time coarser while
creating new files. It may lower the accuracy of file times. But it's
not a big deal since we already use coarse time in other places like
ocfs2_update_inode_atime and inode_set_ctime_current.
Link: https://lkml.kernel.org/r/20240408082041.20925-5-glass.su@suse.com
Fixes: c62c38f6b91b ("ocfs2: replace CURRENT_TIME macro")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cbcb62dddf5346077feb82b7b0c9254222d3445 upstream.
While taking a kernel core dump with makedumpfile on a larger system,
softlockup messages often appear.
While softlockup warnings can be harmless, they can also interfere with
things like RCU freeing memory, which can be problematic when the kdump
kexec image is configured with as little memory as possible.
Avoid the softlockup, and give things like work items and RCU a chance to
do their thing during __read_vmcore by adding a cond_resched.
Link: https://lkml.kernel.org/r/20240507091858.36ff767f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c55b78818cfb732680c4a72ab270cc2d2ee3d0f upstream.
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
Reported-by: syzbot+9dfe490c8176301c1d06@syzkaller.appspotmail.com
Cc: Dave Kleikamp <shaggy@kernel.org>
Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7373a51e7998b508af7136530f3a997b286ce81c ]
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page.
Link: https://lkml.kernel.org/r/20240604134255.7165-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+c8166c541d3971bf6c87@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8166c541d3971bf6c87
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a46acb3697e50548bb265afa1d79163659dd85 ]
In prepartion for switching from kmap() to kmap_local(), return the kmap
address from nilfs_get_page() instead of having the caller look up
page_address().
[konishi.ryusuke: fixed a missing blank line after declaration]
Link: https://lkml.kernel.org/r/20231127143036.2425-7-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7373a51e7998 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79ea65563ad8aaab309d61eeb4d5019dd6cf5fa0 ]
If read_mapping_page() encounters an error, it returns an errno, not a
page with PageError set, so this test is not needed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Stable-dep-of: 7373a51e7998 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb33eb2ef0d88e75564983ef057b44c5b7e4fded ]
Qgroup extent records are created when delayed ref heads are created and
then released after accounting extents at btrfs_qgroup_account_extents(),
called during the transaction commit path.
If a transaction is aborted we free the qgroup records by calling
btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(),
unless we don't have delayed references. We are incorrectly assuming
that no delayed references means we don't have qgroup extents records.
We can currently have no delayed references because we ran them all
during a transaction commit and the transaction was aborted after that
due to some error in the commit path.
So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at
btrfs_destroy_delayed_refs() even if we don't have any delayed references.
Reported-by: syzbot+0fecc032fa134afd49df@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000004e7f980619f91835@google.com/
Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
