commit b5d1b4b46f856da1473c7ba9a5cdfcb55c9b2478 upstream.
The "msg_addr" variable is u64. However, the "aligned_offset" is an
unsigned int. This means that when the code does:
msg_addr &= ~aligned_offset;
it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do
the alignment instead.
Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support")
Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2217fffcd63f86776c985d42e76daa43a56abdf1 ]
Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get
correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to
support iATUs which require a specific alignment.
However, this support cannot have been properly tested.
The whole point is for the iATU to map an address that is aligned,
using dw_pcie_ep_map_addr(), and then let the writel() write to
ep->msi_mem + aligned_offset.
Thus, modify the address that is mapped such that it is aligned.
With this change, dw_pcie_ep_raise_msix_irq() matches the logic in
dw_pcie_ep_raise_msi_irq().
Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org
Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # 5.7
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1291b716bbf969e101d517bfb8ba18d958f758b8 ]
When a device with AER detects an error, it logs error information in its
own AER Error Status registers. It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).
aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.
Decode the Requester ID in the usual Linux format so it matches other
messages.
Sample message changes:
- pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
- pcieport 0000:00:1c.5: AER: can't find device of ID00e5
+ pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
+ pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5
Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df25461119d987b8c81d232cfe4411e91dcabe66 ]
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com
Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e585a37e5061f6d5060517aed1ca4ccb2e56a34c ]
By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:
pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci
Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).
Check and perform the override only if necessary.
Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Vicki Pfau <vi@endrift.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ed48c80b28d8dcd584d6ddaf00c75b7673e1a05 ]
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.
Before:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
pm bus
After:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
bus
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e11c29873a8a296a20f99b3e03095e65ebf897d ]
We found a failure when using the iperf tool during WiFi performance
testing, where some MSIs were received while clearing the interrupt
status, and these MSIs cannot be serviced.
The interrupt status can be cleared even if the MSI status remains pending.
As such, given the edge-triggered interrupt type, its status should be
cleared before being dispatched to the handler of the underling device.
[kwilczynski: commit log, code comment wording]
Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com
Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com>
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: rewrap comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ]
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.
In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.
Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.
Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a18615b1cfc04f00548c60eb9a77e0ce56e848fd upstream.
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects
wrong endianness in ATS invalidation message body. This problem can lead to
outdated translations being returned as valid and finally cause system
instability.
To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for
vulnerable IPU E2000 devices.
Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f18b1137d38c091cc8c16365219f0a1d4a30b3d1 upstream.
Introduce quirk_no_ats() helper function to provide a standard way to
disable ATS capability in PCI quirks.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream.
This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.
Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:
- Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
sometimes.
- Dongli reported a similar problem with hot-add of SCSI disks.
- Jonathan reported a console freeze during boot on bare metal due to an
error in radeon GPU initialization.
Revert both patches to avoid adding these problems. This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit has no upstream equivalent.
After commit db5ebaeb8fda ("PCI: keystone: Don't discard .probe()
callback") in 5.10.202, there are two modpost warnings when building with
clang:
WARNING: modpost: vmlinux.o(.text+0x5aa6dc): Section mismatch in reference from the function ks_pcie_probe() to the function .init.text:ks_pcie_add_pcie_port()
The function ks_pcie_probe() references
the function __init ks_pcie_add_pcie_port().
This is often because ks_pcie_probe lacks a __init
annotation or the annotation of ks_pcie_add_pcie_port is wrong.
WARNING: modpost: vmlinux.o(.text+0x5aa6f4): Section mismatch in reference from the function ks_pcie_probe() to the function .init.text:ks_pcie_add_pcie_ep()
The function ks_pcie_probe() references
the function __init ks_pcie_add_pcie_ep().
This is often because ks_pcie_probe lacks a __init
annotation or the annotation of ks_pcie_add_pcie_ep is wrong.
ks_pcie_add_pcie_ep() was removed in upstream commit a0fd361db8e5 ("PCI:
dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common
code") and ks_pcie_add_pcie_port() was removed in upstream
commit 60f5b73fa0f2 ("PCI: dwc: Remove unnecessary wrappers around
dw_pcie_host_init()"), both of which happened before upstream
commit 7994db905c0f ("PCI: keystone: Don't discard .probe() callback").
As neither of these removal changes are really suitable for stable, just
remove __init from these functions in stable, as it is no longer a
correct annotation after dropping __init from ks_pcie_probe().
Fixes: 012dba0ab814 ("PCI: keystone: Don't discard .probe() callback")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 ]
With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7994db905c0fd692cf04c527585f08a91b560144 upstream.
The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.
The right thing to do is do always have the probe callback available. Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.
Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream.
With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.
Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream.
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.
Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask. Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.
In this scenario:
- Write 0 to "l1_aspm" to disable L1
- Write 1 to "l1_1_aspm" to enable L1.1
the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.
Fix this by explicitly disabling all the L1.x substates when disabling L1.
Fixes: 72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b70a4307cccebe91388337b1c85735ce4de6ff upstream.
struct pci_dev contains two flags which govern whether the device may
suspend to D3cold:
* no_d3cold provides an opt-out for drivers (e.g. if a device is known
to not wake from D3cold)
* d3cold_allowed provides an opt-out for user space (default is true,
user space may set to false)
Since commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend"),
the user space setting overwrites the driver setting. Essentially user
space is trusted to know better than the driver whether D3cold is
working.
That feels unsafe and wrong. Assume that the change was introduced
inadvertently and do not overwrite no_d3cold when d3cold_allowed is
modified. Instead, consider d3cold_allowed in addition to no_d3cold
when choosing a suspend state for the device.
That way, user space may opt out of D3cold if the driver hasn't, but it
may no longer force an opt in if the driver has opted out.
Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 759574abd78e3b47ec45bbd31a64e8832cf73f97 ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.
Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).
Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
