commit 3fa5a0f5b0d69e31c6476cd81afeca3cc25a4927 upstream.
When CONFIG_PM isn't defined we don't have the function
ieee80211_sta_restart() compiled in, but we always need
it now for firmware restart. Move it out of the ifdef.
Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart")
Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 393b6bc174b0dd21bb2a36c13b36e62fc3474a23 upstream.
Avoid potentially crashing in the driver because of uninitialized private data
Fixes: 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241002095630.22431-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d5953d680f7e96208c29ce4139a0e38de87a57fe ]
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Reported-by: Slavin Liu <slavin-ayu@qq.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04c20a9356f283da623903e81e7c6d5df7e4dc3c ]
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62fafcd63139920eb25b3fbf154177ce3e6f3232 ]
NETIF_F_IP|IPV6_CSUM feature flag indicates UDP and TCP csum offload
while NETIF_F_HW_CSUM feature flag indicates ip generic csum offload
for HW, which includes not only for TCP/UDP csum, but also for other
protocols' csum like GRE's.
However, in skb_csum_hwoffload_help() it only checks features against
NETIF_F_CSUM_MASK(NETIF_F_HW|IP|IPV6_CSUM). So if it's a non TCP/UDP
packet and the features doesn't support NETIF_F_HW_CSUM, but supports
NETIF_F_IP|IPV6_CSUM only, it would still return 0 and leave the HW
to do csum.
This patch is to support ip generic csum processing by checking
NETIF_F_HW_CSUM for all protocols, and check (NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM) only for TCP and UDP.
Note that we're using skb->csum_offset to check if it's a TCP/UDP
proctol, this might be fragile. However, as Alex said, for now we
only have a few L4 protocols that are requesting Tx csum offload,
we'd better fix this until a new protocol comes with a same csum
offset.
v1->v2:
- not extend skb->csum_not_inet, but use skb->csum_offset to tell
if it's an UDP/TCP csum packet.
v2->v3:
- add a note in the changelog, as Willem suggested.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e95c4384438adeaa772caa560244b1a2efef816 ]
In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it's valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.
In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).
In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.
Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
net/sched/sch_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024165547.418570-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d352ccf1e9935b5222ca84e8baeb07a0c8f94b9 ]
Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.
Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.
This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware
In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.
The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.
Tested on ath10k using WCN3990, QCA6174
Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13dee10b30c058ee2c58c5da00339cc0d4201aa6 ]
When we reconfigure, the driver might do some things to complete
the reconfiguration. It's strange and could be broken in some
cases because we restart other works (e.g. remain-on-channel and
TX) before this happens, yet only start queues later.
Change this to do the reconfig complete when reconfiguration is
actually complete, not when we've already started doing other
things again.
For iwlwifi, this should fix a race where the reconfig can race
with TX, for ath10k and ath11k that also use this it won't make
a difference because they just start queues there, and mac80211
also stopped the queues and will restart them later as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3e046c31441d182b954fc2f57b2dc38c71ad4bc ]
When tracing is disabled, there is no point in asking the user about
enabling tracing of all mac80211 debug messages.
Fixes: 3fae0273168026ed ("mac80211: trace debug messages")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/85bbe38ce0df13350f45714e2dc288cc70947a19.1727179690.git.geert@linux-m68k.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f0ab59e6537c6a8f9e1b355b48f9c05a76e8563 ]
This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on.
Reported-by: syzbot+cc39f136925517aed571@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f504465970aebb2467da548f7c1efbbf36d0f44b ]
In 'taprio_change()', 'admin' pointer may become dangling due to sched
switch / removal caused by 'advance_sched()', and critical section
protected by 'q->current_entry_lock' is too small to prevent from such
a scenario (which causes use-after-free detected by KASAN). Fix this
by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update
'admin' immediately before an attempt to schedule freeing.
Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule")
Reported-by: syzbot+b65e0af58423fc8a73aa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20241018051339.418890-1-dmantipov@yandex.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8469721034300bbb6dec5b4bf32492c95e16a0c ]
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05af0 ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64a90991ba8d4e32e3173ddd83d0b24167a5668c ]
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82ac39ebd6db0c9f7a97a934bda1e3e101a9d201 ]
pnetid of pi (not newly allocated pe) should be compared
Fixes: e888a2e8337c ("net/smc: introduce list of pnetids for Ethernet devices")
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Link: https://patch.msgid.link/20241014115321.33234-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22600596b6756b166fd052d5facb66287e6f0bad ]
After commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.
When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb()
ip_output()
<--- dst timeout or flushed
dst_dev_put()
ip_finish_output2()
ip_neigh_for_gw()
This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.
The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf869a ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.
As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().
Fixes: 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e32d262c89e2b22cb0640223f953b548617ed8a6 upstream.
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mib.[ch], because commit 104125b82e5c ("mptcp: add mib
for infinite map sending") is linked to a new feature, not available
in this version. Resolving the conflicts is easy, simply adding the
new lines declaring the new "DSS corruptions" MIB entries.
Also removed in protocol.c and subflow.c all DEBUG_NET_WARN_ON_ONCE
because they are not defined in this version: enough with the MIB
counters that have been added in this commit. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0530020a7c8f2204e784f0dbdc882bbd961fdbde upstream.
This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e32d262c89e2 ("mptcp: handle consistently DSS corruption")
[ Conflicts in protocol.c, because commit 3e5014909b56 ("mptcp: cleanup
MPJ subflow list handling") is not in this version. This commit is
linked to a new feature, changing the context around. The new line
can still be added at the same place.
Conflicts in protocol.h, because commit 4f6e14bd19d6 ("mptcp: support
TCP_CORK and TCP_NODELAY") is not in this version. This commit is
linked to a new feature, changing the context around. The new line can
still be added at the same place.
Conflicts in subflow.c, because commit 0348c690ed37 ("mptcp: add the
fallback check") is not in this version. This commit is linked to a
new feature, changing the context around. The new line can still be
added at the same place.
Extra conflicts in v5.10, because the context has been changed. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31db78a4923ef5e2008f2eed321811ca79e7f71b upstream.
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Sherry: bp to fix CVE-2023-52530, resolved minor conflicts in
net/mac80211/cfg.c because of context change due to missing commit
23a5f0af6ff4 ("wifi: mac80211: remove cipher scheme support")
ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")]
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efb056e5f1f0036179b2f92c1c15f5ea7a891d70 upstream.
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: acc641ab95b66 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3bd2102e464202b58d57390a538d96f57ffc361 upstream.
Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
[1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
[2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Anton Makarov <am@3a-alliance.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db53cd3d88dc328dea2e968c9c8d3b4294a8a674 upstream.
Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 748b82c23e25310fec54e1eff2cb63936f391b24 upstream.
The commit referenced in the Fixes tag no longer changes the
flow oif to the l3mdev ifindex. A xfrm use case was expecting
the flowi_oif to be the VRF if relevant and the change broke
that test. Update xfrm_bundle_create to pass oif if set and any
potential flowi_l3mdev if oif is not set.
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f802 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05ef7055debc804e8083737402127975e7244fc4 ]
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa87 ("netfilter: nft_fib: Fix for rpath check with VRF devices")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fcc064b305a1aadeff0d4bff961094d27660acd ]
Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.
Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.
Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acc641ab95b66b813c1ce856c377a2bbe71e7f52 ]
Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40867d74c374b235e14d839f3a77f26684feefe5 ]
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d5c70e6155d5eae198bade4afeab3c1b15073b6 ]
If hashing fails in sctp_listen_start(), the socket remains in the
LISTENING state, even though it was not added to the hash table.
This can lead to a scenario where a socket appears to be listening
without actually being accessible.
This patch ensures that if the hashing operation fails, the sk_state
is set back to CLOSED before returning an error.
Note that there is no need to undo the autobind operation if hashing
fails, as the bind port can still be used for next listen() call on
the same socket.
Fixes: 76c6d988aeb3 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08d1914293dae38350b8088980e59fbc699a72fe ]
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491
Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218
Fixes: 3241ad820dbb ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
