[ Upstream commit ad6639f143a0b42d7fb110ad14f5949f7c218890 ]
When building for the UM arch and neither INDIRECT_IOMEM=y, nor
HAS_IOMEM=y is selected, it will fall back to the implementations from
asm-generic/io.h for IO memcpy. But these fall-back functions just do a
memcpy. So, instead of depending on UML, add dependency on 'HAS_IOMEM ||
INDIRECT_IOMEM'.
Reviewed-by: Yann Sionneau <ysionneau@kalrayinc.com>
Signed-off-by: Julian Vetter <jvetter@kalrayinc.com>
Link: https://patch.msgid.link/20241010124601.700528-1-jvetter@kalrayinc.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4413665dd6c528b31284119e3571c25f371e1c36 ]
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b8ea38fabab45ad911a32a336416062553dfe9c ]
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 4413665dd6c5 ("ALSA: usb-audio: Add quirks for Dell WD19 dock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bb4af400c386374ab1047df44c508512c08c31f ]
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid.
Fixes: 794df9448edb ("ASoC: stm32: spdifrx: manage rebind issue")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241105140242.527279-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8abbf1f01d6a2ef9f911f793e30f7382154b5a3a ]
If amdtp_stream_init() fails in amdtp_tscm_init(), the latter returns zero,
though it's supposed to return error code, which is checked inside
init_stream() in file tascam-stream.c.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 47faeea25ef3 ("ALSA: firewire-tascam: add data block processing layer")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241101185517.1819-1-m.masimov@maxima.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d221b844ee79823ffc29b7badc4010bdb0960224 ]
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
Fixes: 11b9cd748e31 ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 49da1463c9e3d2082276c3e0e2a8b65a88711cd2 upstream.
A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could
possibly return NULL pointer. NULL Pointer Dereference may be
triggerred without addtional check.
Add a NULL check for the returned pointer.
Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Cc: stable@vger.kernel.org
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241006205737.8829-1-zichenxie0106@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35fdc6e1c16099078bcbd73a6c8f1733ae7f1909 upstream.
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed
correctly.
This patch adds a quirk with the proper pin connections.
Note that I do not own this laptop, so I cannot guarantee that this
fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482
This model appears to have two different dev IDs...
- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)
I don't think the audio system was changed between model revisions, so
the patch applies for both IDs.
Signed-off-by: José Relvas <josemonsantorelvas@gmail.com>
Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72cafe63b35d06b5cfbaf807e90ae657907858da ]
The step variable is initialized to zero. It is changed in the loop,
but if it's not changed it will remain zero. Add a variable check
before the division.
The observed behavior was introduced by commit 826b5de90c0b
("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"),
and it is difficult to show that any of the interval parameters will
satisfy the snd_interval_test() condition with data from the
amdtp_rate_table[] table.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size")
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20241018060018.1189537-1-shum.sdl@nppct.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72455e33173c1a00c0ce93d2b0198eb45d5f4195 ]
FCONT=1 means On FIFO error, the SAI will continue from the
same word that caused the FIFO error to set after the FIFO
warning flag has been cleared.
Set FCONT bit in control register to avoid the channel swap
issue after SAI xrun.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1727676508-22830-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream.
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream.
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ]
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dee476950cbd83125655a3f49e00d63b79f6114e upstream.
The headset mic requires a fixup to be properly detected/used.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240926060252.25630-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 703235a244e533652346844cfa42623afb36eed1 upstream.
Add hw monitor volume control for POD HD500X. This is done adding
LINE6_CAP_HWMON_CTL to the capabilities
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ]
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b986c7430a6bb68d523dac7bfc74cbd5b44ef96 ]
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51c925c11d7b855167e64b63eb4378e5adfc11d ]
Specify shortnames for the following Logitech Devices: Rally bar, Rally
bar mini, Tap, MeetUp and Huddle.
Signed-off-by: Joshua Pius <joshuapius@chromium.org>
Link: https://patch.msgid.link/20240912152635.1859737-1-joshuapius@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3ad39b791c2ecf718afcaca30e5ceafa939d5c ]
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3ebb007060f89d5a45c9b99f06a55e36a1945b5 ]
We received a regression report for System76 Pangolin (pang14) due to
the recent fix for Tuxedo Sirius devices to support the top speaker.
The reason was the conflicting PCI SSID, as often seen.
As a workaround, now the codec SSID is checked and the quirk is
applied conditionally only to Sirius devices.
Fixes: 4178d78cd7a8 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices")
Reported-by: Christian Heusel <christian@heusel.eu>
Reported-by: Jerry <jerryluo225@gmail.com>
Closes: https://lore.kernel.org/c930b6a6-64e5-498f-b65a-1cd5e0a1d733@heusel.eu
Link: https://patch.msgid.link/20241004082602.29016-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c801e7f77445bc56e5e1fec6191fd4503534787 ]
Some time ago, we introduced the obey_preferred_dacs flag for choosing
the DAC/pin pairs specified by the driver instead of parsing the
paths. This works as expected, per se, but there have been a few
cases where we forgot to set this flag while preferred_dacs table is
already set up. It ended up with incorrect wiring and made us
wondering why it doesn't work.
Basically, when the preferred_dacs table is provided, it means that
the driver really wants to wire up to follow that. That is, the
presence of the preferred_dacs table itself is already a "do-it"
flag.
In this patch, we simply replace the evaluation of obey_preferred_dacs
flag with the presence of preferred_dacs table for fixing the
misbehavior. Another patch to drop of the obsoleted flag will
follow.
Fixes: 242d990c158d ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803
Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05df9732a0894846c46d0062d4af535c5002799d ]
The headset push button cannot work properly in case of the ALC257.
This patch reverted the previous commit to correct the side effect.
Fixes: ef9718b3d54e ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7")
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20240930105039.3473266-1-oder_chiou@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 368e4663c557de4a33f321b44e7eeec0a21b2e4e ]
"assigned" and "assigned->name" are allocated in snd_mixer_oss_proc_write()
using kmalloc() and kstrdup(), so there is no point in using kfree_const()
to free these resources.
Switch to the more standard kfree() to free these resources.
This could avoid a memory leak.
Fixes: 454f5ec1d2b7 ("ALSA: mixer: oss: Constify snd_mixer_oss_assign_table definition")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/63ac20f64234b7c9ea87a7fa9baf41e8255852f7.1727374631.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
