diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0b858777c..56e19537c 100755
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -377,6 +377,7 @@ config SERIAL_MAX310X
 	depends on SPI_MASTER
 	select SERIAL_CORE
 	select REGMAP_SPI if SPI_MASTER
+	select REGMAP_I2C if I2C
 	help
 	  This selects support for an advanced UART from Maxim (Dallas).
 	  Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index b90281ac5..ed1aaa198 100755
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
@@ -73,6 +74,7 @@
 
 /* Extended registers */
 #define MAX310X_SPI_REVID_EXTREG	MAX310X_REG_05 /* Revision ID */
+#define MAX310X_I2C_REVID_EXTREG	(0x25) /* Revision ID */
 
 /* IRQ register bits */
 #define MAX310X_IRQ_LSR_BIT		(1 << 0) /* LSR interrupt */
@@ -260,6 +262,10 @@ struct max310x_if_cfg {
 };
 
 struct max310x_devtype {
+	struct {
+		unsigned short min;
+		unsigned short max;
+	} slave_addr;
 	char	name[9];
 	int	nr;
 	u8	mode1;
@@ -431,6 +437,10 @@ static const struct max310x_devtype max3107_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max3107_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x2c,
+		.max = 0x2f,
+	},
 };
 
 static const struct max310x_devtype max3108_devtype = {
@@ -439,6 +449,10 @@ static const struct max310x_devtype max3108_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3108_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max3109_devtype = {
@@ -447,6 +461,10 @@ static const struct max310x_devtype max3109_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3109_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max14830_devtype = {
@@ -455,6 +473,10 @@ static const struct max310x_devtype max14830_devtype = {
 	.mode1	= MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max14830_detect,
 	.power	= max14830_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
@@ -1557,6 +1579,97 @@ static struct spi_driver max310x_spi_driver = {
 };
 #endif
 
+#ifdef CONFIG_I2C
+static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable)
+{
+	return 0;
+}
+
+static struct regmap_config regcfg_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.writeable_reg = max310x_reg_writeable,
+	.volatile_reg = max310x_reg_volatile,
+	.precious_reg = max310x_reg_precious,
+	.max_register = MAX310X_I2C_REVID_EXTREG,
+};
+
+static const struct max310x_if_cfg max310x_i2c_if_cfg = {
+	.extended_reg_enable = max310x_i2c_extended_reg_enable,
+	.rev_id_reg = MAX310X_I2C_REVID_EXTREG,
+};
+
+static unsigned short max310x_i2c_slave_addr(unsigned short addr,
+					     unsigned int nr)
+{
+	/*
+	 * For MAX14830 and MAX3109, the slave address depends on what the
+	 * A0 and A1 pins are tied to.
+	 * See Table I2C Address Map of the datasheet.
+	 * Based on that table, the following formulas were determined.
+	 * UART1 - UART0 = 0x10
+	 * UART2 - UART1 = 0x20 + 0x10
+	 * UART3 - UART2 = 0x10
+	 */
+
+	addr -= nr * 0x10;
+
+	if (nr >= 2)
+		addr -= 0x20;
+
+	return addr;
+}
+
+static int max310x_i2c_probe(struct i2c_client *client)
+{
+	const struct max310x_devtype *devtype =
+			device_get_match_data(&client->dev);
+	struct i2c_client *port_client;
+	struct regmap *regmaps[4];
+	unsigned int i;
+	u8 port_addr;
+
+	if (client->addr < devtype->slave_addr.min ||
+		client->addr > devtype->slave_addr.max)
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "Slave addr 0x%x outside of range [0x%x, 0x%x]\n",
+				     client->addr, devtype->slave_addr.min,
+				     devtype->slave_addr.max);
+
+	regmaps[0] = devm_regmap_init_i2c(client, &regcfg_i2c);
+
+	for (i = 1; i < devtype->nr; i++) {
+		port_addr = max310x_i2c_slave_addr(client->addr, i);
+		port_client = devm_i2c_new_dummy_device(&client->dev,
+							client->adapter,
+							port_addr);
+
+		regmaps[i] = devm_regmap_init_i2c(port_client, &regcfg_i2c);
+	}
+
+	return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg,
+			     regmaps, client->irq);
+}
+
+static int max310x_i2c_remove(struct i2c_client *client)
+{
+	max310x_remove(&client->dev);
+
+	return 0;
+}
+
+static struct i2c_driver max310x_i2c_driver = {
+	.driver = {
+		.name		= MAX310X_NAME,
+		.of_match_table	= max310x_dt_ids,
+		.pm		= &max310x_pm_ops,
+	},
+	.probe_new	= max310x_i2c_probe,
+	.remove		= max310x_i2c_remove,
+};
+#endif
+
 static int __init max310x_uart_init(void)
 {
 	int ret;
@@ -1570,15 +1683,35 @@ static int __init max310x_uart_init(void)
 #ifdef CONFIG_SPI_MASTER
 	ret = spi_register_driver(&max310x_spi_driver);
 	if (ret)
-		uart_unregister_driver(&max310x_uart);
+		goto err_spi_register;
 #endif
 
+#ifdef CONFIG_I2C
+	ret = i2c_add_driver(&max310x_i2c_driver);
+	if (ret)
+		goto err_i2c_register;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_I2C
+err_i2c_register:
+	spi_unregister_driver(&max310x_spi_driver);
+#endif
+
+err_spi_register:
+	uart_unregister_driver(&max310x_uart);
+
 	return ret;
 }
 module_init(max310x_uart_init);
 
 static void __exit max310x_uart_exit(void)
 {
+#ifdef CONFIG_I2C
+	i2c_del_driver(&max310x_i2c_driver);
+#endif
+
 #ifdef CONFIG_SPI_MASTER
 	spi_unregister_driver(&max310x_spi_driver);
 #endif